Development of a selective and sensitive spectrophotometric method for the trace determination of thallium(III) using 3-methyl-2-benzothiazolinone hydrazone hydrochloride and N-(1-naphthyl)-ethylenediamine dihydrochloride

A simple, selective, sensitive, and rapid spectrophotometric method has been developed for the determination of thallium(III) using 3-methyl-2-benzothiazolinone hydrazone hydrochloride and N-(1-naphthyl)-ethylenediamine dihydrochloride. The obtained product had an absorption maximum of 590 nm. Beer's law was valid over the concentration range of 0.15-8 microg/mL. The molar absorptivity and Sandell's sensitivity of the colored system were 2.93 x 10(4) L/mol x cm and 0.00723 microg/mL, respectively. The effect of different acids on the sensitivity of the method, interference by foreign substances, the optimum reaction conditions, and other analytical parameters were evaluated. The proposed method has been successfully applied in the analysis of T1(III) in standard reference materials, synthetic mixtures, and water and urine samples. The performance of the proposed method was evaluated in terms of Student's t-test and variance ratio F-test, which indicated the significance of the proposed method over reported methods.     

Diformylhydrazine as analytical reagent for spectrophotometric determination of iron(II) and iron(III)

The bidentate ligand diformylhydrazine (OHC-HN-NH-CHO), DFH, combines with iron(II) and iron(III) in alkaline media in the pH range 7.3-9.3 to form an intensely colored red-purple iron(III) complex with an absorption maximum at 470 nm. Beer's law is obeyed for iron concentrations from 0.25 to 13 microg mL(-1). The molar absorptivity was in the range 0.3258x10(4)-0.3351x10(4) L mol(-1) cm(-1) and Sandell's sensitivity was found to be 0.0168 microg cm(-2). The method has been applied to the determination of iron in industrial waste, ground water, and pharmaceutical samples.     

Colour reaction of gold with 5-(4-sodium sulphonatephenylazo)-8-aminoquinoline and its analytical application

The synthesis of 5-(4-sodium sulphonatephenylazo)-8-aminoquinoline (SPAQ) is described, and a simple, rapid, selective and sensitive new spectrophotometric method for determination of gold is developed. SPAQ reacts with gold(III), and in the presence of cetyl trimethyl ammonium bromide cationic surfactant and upon making the solution alkaline, forms a blue-green 1:3 (metal:ligand) with an absorption maximum at 605 nm. Beer's law is obeyed over the concentration range 0-2 microg/ml gold. The molar absorptivity and Sandell's sensitivity of the method are 1.48 x 10(5) 1.mole(-1).cm(-1) and 0.0013 microg/cm(2), respectively. The interference of various ions has been studied and the method has been used for the determination of microamounts of gold in ores and anode slimes.     

Flow injection determination of hydrazine with fluorimetric detection

A spectrophotometric flow injection system is described for the determination of hydrazine, involving oxidation of hydrazine by thallium(III) with concomitant formation of thallium(I). The optimum analytical conditions have been established. The linear range for hydrazine is 25-500 ng ml(-1) with a detection limit of 20 ng ml(-1). The sampling frequency is 40+/-5 samples h(-1). The relative standard deviation for 100, 250 and 500 ng ml(-1) is 3.5, 2.6 and 1.8%, respectively. The method has been applied to the determination of hydrazine in water.     

Rapid spectrophotometric determination of chromium(III)

A spectrophotometric procedure is suggested for the determination of Cr(III). The reaction between Cr(III) and 2-(5-bromo-2-pyridylazo)-5-dimethylaminophenol is accelerated by sodium dodecyl sulphate(SDS), sodium benzoate causes a further increase in the absorbance of the chelate. The optimum pH range for the reaction is 5-5.8(benzoate buffer). The chelate exhibits maximum absorbance at 590 nm, obeys Beer's law over the concentration range 0.02-0.56 microg/ml of Cr(III), has molar absorptivity of 7.8 x 10(4) 1. mol(-1) cm(-1) and a Sandell sensitivity of 0.66 ng/cm. The metal to ligand ratio is 1:2 in the absence of SDS and 1:1 in its presence. A procedure for the determination of Cr(III) and Cr(VI), when present together, is described. The method has been applied to the analysis of Cr(III) in tap water.     

Spectrophotometric determination of trace amounts of thallium with 7-(4,5-dimethylthiazolyl-2-azo)-8-hydroxyquinoline-5-sulphonic acid

A new reagent, 7-(4,5-dimethylthiazolyl-2-azo)-8-hydroxyquinoline-5-sulphonic acid, has been examined to evaluate its usefulness as a spectrophotometric reagent for thallium(III). A purple-red complex is formed in aqueous solution at pH 4-5 in the presence of cetylpyridinium chloride and the stoichimetric ratio is 1:2 (Tl:reagent). The apparent stability constant is 1.5 x 10(11). The effect of diverse ions has been studied and a method for determining trace amounts of thallium is proposed.     

Extraction separation of thallium (III) from thallium (I) with n-octylaniline

A novel method is developed for the extraction separation of thallium(III) from salicylate medium with n-octylaniline dissolved in toluene as an extractant. The optimum conditions have been determined by making a critical study of weak acid concentration, extractant concentration, period of equilibration and effect of solvent on the equilibria. The thallium (III) from the pregnant organic phase is stripped with acetate buffer solution (pH 4.7) and determined complexometrically with EDTA. The method affords the sequential separation of thallium(III) from thallium(I) and also commonly associated metal ions such as Al(III), Ga(III), In(III), Fe(III), Bi(III), Sb(III) and Pb(II). It is used for analysis of synthetic mixtures of associated metal ions and alloys. The method is highly selective, simple and reproducible. The reaction takes place at room temperature and requires 15-20 min for extraction and determination of thallium(III).     

A new selective chromogenic reagent for the spectrophotometric determination of thallium(I) and (III) and its separation using flotation and the solid-phase extraction on polyurethane foam.

A new sensitive chromogenic reagent, 9,10-phenanthaquinone monoethylthiosemicarbazone (PET), has been synthesized and used in the spectrophotometric determination of Tl(III). In HNO3, H2SO4 or H3PO4 acids, PET can react immediately at room temperature with Tl(III) to form a red 2:1 complex with a maximum absorption at 516 nm. The different analytical parameters affecting the extraction and determination processes have been examined. The calibration curve was found to be linear over the range 0.2-10 microg cm(-3) with a molar absorptivity of 2.2 x 10(4) dm3 mol(-1) cm(-1). Sandell's sensitivity was found to be 0.0093 microg cm(-2). No interference from macroamounts of foreign ions was detected, except for Pd(II). However, Pd(II) does not affect the determination process, because its complex with PET has its lambda(max) at 625 nm. The proposed method has been applied to the determination of Tl(I and III) in synthetic and natural samples after separation by flotation (in oleic acid/kerosene) and solid-phase extraction (on polyurethane foam) techniques. The two methods were found to be accurate and not subject to random error, but solid-phase extraction was preferred because it is cheap, simpler and there is no contamination risk coming from flotation reagents.     

Untersuchung Der Kcmplexbildung Von Thallium(III) Mit 1-Phenyl-3-Methyl-4-Benzoylpyrazolon-5

Abstract

A study has been made of the method used for extracting the complex formed between thallium(III) and PhMBP. It has been demonstrated that thallium(III) can be readily extracted as a complex with PhMBP by organic solvents at low pH. The extraction of thallium(III) has been studied as a function of pH, concentration of reagent, nature of solvent, duration of contact of the phases and concentration of thallium(III). It has been established that thallium(III) forms a complex with PhMBP of the type MA_n, where n=3. The stability constants and distribution constant of the neutral complex has been calculated by the method of Leden-Rydberg.     

On-line electrochemical oxidation of Cr(III) for the determination of total Cr by flow injection-solid phase spectrophotometry.

A novel on-line oxidation method of ultra-trace Cr(III) dissolved in natural water has been developed using a flow electrolysis cell. This method was successfully applied to the determination of the total Cr concentration by flow injection-solid phase spectrophotometry using diphenylcarbazide as a coloring agent. With the applied potential of 1.35 V (vs. Ag/AgCl) and the flow rate of 0.80 cm(3) min(-1), Cr(III) was quantitatively oxidized to Cr(VI) at room temperature. The total Cr concentration of sub-microg dm(-3) in 3 - 4 samples could be determined within 1 h using an aqueous sample volume of 7.1 cm(3). The analytical values of the total Cr concentration in natural water were in good agreement with those obtained by ICP-MS. The detection limit of the proposed method was 0.014 microg dm(-3) (3sigma, n = 7). This method could be applied to the specific determination of Cr(III) and Cr(VI) in river water samples.     

The surfactant sensitized analytical reaction of cerium(IV) with some triphenylformazan derivatives

Cationic surfactant, cetylpyridinium bromide (CPB), sensitizes the colour reaction of cerium(IV) with 1,3-o-hydroxyphenyl-5-phenylformazan(I), 1-m-hydroxyphenyl-3-o-hydroxyphenyl-5-phenylformazan(II) and 1-m-carboxyphenyl-3-o-hydroxyphenyl-5-phenylformazan(III). The formation of a soluble ternary complex of stoichiometric ratio 1:1:1 (Ce(IV)-R-CPB) is responsible for the observed enhancement in the molar absorptivity and Sandell sensitivity of the formed complex, when a surfactant is present. The ternary complex exhibits absorption maxima at 596, 571 and 607 nm (epsilon=6.05 x 10(4), 6.28 x 10(4) and 8.06 x 10(4)L mol(-1)cm(-1)) using triphenylformazan derivatives I, II and III, respectively. Beer's law is obeyed between 0.15 and 2.5 microg ml(-1), whereas, optimum concentration range applying Ringbom method is in the range 0.30-2.25 microg ml(-1). Conditional formation constants in the presence and absence of CPB for Ce(IV) complexes have been calculated. The proposed method has been successfully applied to the analysis of magnesium-base cerium alloys and synthetic mixtures corresponding to various cerium alloys.     

Solid phase extraction and spectrophotometric determination of Au(III) with 5-(2-hydroxy-5-nitrophenylazo)thiorhodanine.

A new chromogenic reagent, 5-(2-hydroxy-5-nitrophenylazo)thiorhodanine (HNATR) was synthesized. A highly sensitive, selective and rapid method for the determination microg l(-1) level of Au(III) based on the rapid reaction of Au(III) with HNATR and the solid phase extraction of the colored complex with a reversed phase polymer-based C(18) cartridge have been developed. The HNATR reacted with Au(III) to form a red complex of a molar ratio 1:2 (Au(III) to HNATR) in the presence of 0.05 - 0.5 mol l(-1) of phosphoric acid solution and emulsifier-OP medium. This complex was enriched by the solid phase extraction with a polymer-based C(18) cartridge. The enrichment factor of 100 was achieved. The molar absorptivity of the complex is 1.37 x 10(5) l mol(-1) cm(-1) at 520 nm in the measured solution. The system obeys Beer's law in the range of 0.01 - 3 microg ml(-1). The relative standard deviation for eleven replicates sample of 0.5 microg l(-1) level is 2.18%. The detection limit, based on the three times of standard deviation is 0.02 microg l(-1) in the original sample. This method was applied to the determination of gold in water and ore with good results.     

Determination of thallium(III) by use of a mercury reductor

A convenient method has been developed for the determination of thallium(III) by using a mercury reductor. Thallium(III) is reduced to thallium(I) in 0.5–4N hydrochloric or sulphuric acid medium and the determination is completed by oxidative titration with potassium bromate. The method is extended to analysis of thallium(III)-thallium(I) and thallium(III)-iron(III) mixtures.     

Spectrophotometric determination of thorium in standard samples and monazite sands based on the floated complex of thorium with N-hydroxy-N,N′-diphenylbenzamidine and thorin

A selective and sensitive spectrophotometric method for the determination of Th(IV) has been based on the reaction with thorin and subsequent extraction of the red-orange coloured complex with N-hydroxy-N,N'-diphenylbenzamidine (HDPBA) in benzene as floated complex at pH 2.2. The complex in ethanol exhibits a maximum absorbance at 495 nm, with a molar absorptivity of 6.0x10(4) l mol(-1) cm(-1), with a Sandell's sensitivity of 3.9x10(-3) microg cm(-2). The method follows Beer's law up to 3.0 microg Th(IV) ml(-1). None of the common cations and anions tested interfere. The detection limit of the method is 0.04 microg Th(IV) ml(-1), the RSD (n=10) is 1.4%. The method has been successfully employed for the determination of thorium in various standard and monazite samples.     

Sensitized spectrophotometric determination of Cr(III) ion for speciation of chromium ion in surfactant media using alpha-benzoin oxime

A simple and accurate micellanized spectrophotometric method for determination of trace amounts of Cr(III) ion in tab and top water and a synthetic mixture has been described. The micellar method is based on effect of organized molecular assemblies such as micelles in spectrophotometric measurement due to their effect on the systems of interest. The ability of micellar system in solubilizing of sparingly soluble ligand or complexes has been used for increasing figures of merit of an analytical method. Due to solubility increasing in aqueous media requirement for a primary extraction can be eliminated. Using the alpha-benzoin oxime (alpha-BO) spectrophotometric determination of Cr(III) ion has been performed and results are compared. The spectrophotometric determination of Cr(III) ion using alpha-BO in the presence of non-ionic surfactant Triton X-100 has been performed. The influence of type and amount of surfactant, pH, complexation time and amount of ligand were examined. Finally, the repeatability, accuracy and the effect of interfering ions on the determination of Cr(III) ion was evaluated. The proposed methods successfully with recovery yield of almost 100% have been applied to the rapid and simple determination of Cr(III) ion in the real samples. There is a good agreement between methods and atomic absorption spectrometry. The Beers law is obeyed over the concentration range of 0.1-13.7 microg mL(-1) for micellar media. The detection limit is 0.8 ng mL(-1). The molar absorptivity of complex is 5350 L mol(-1) cm(-1).     

Kinetics of the oxidation of cyclohexene by thallium(III) acetate

The kinetics of the reaction by which thallium(III) acetate oxidizes cyclohexene in glacial acetic acid medium, has been studied by UV spectrophotometric observation at 30°C. The consumption of thallium(III) acetate follows a second-order rate law exhibiting first-order dependence on each of thallium(III) acetate and cyclohexene; however, the first-order dependence on cyclohexene disappears at high cyclohexene concentrations as pseudo-first-order conditions prevail above 0.2 M cyclohexene. A steady-state model of the following form is proposed: where Tl, Cy, and Com are units of Thallium(III) acetate, cyclohexene, and a reaction complex. The value of k₂ has been evaluated as 0.00027 and (k_?1 + k₂) as 0.0385k₁. For low thallium(III) acetate concentrations the reaction kinetics follow the rate law: where α = the excess concentration of cyclohexene over thallium(III) triacetate. For thallium(III) acetate concentrations above 0.02 M, double salt formation of thallium(III) acetate with product thallium(I) acetate removes thallium(III) acetate from the reaction and a modified rate law is observed. Runge–Kutta numerical solutions to the differential equations provide confirmation that the rate expressions are valid in predicting the observed concentrations of thallium(III) acetate.     

Sequential oxidimetric determination of thallium(I) and (III)

The reaction between thallium(III) and oxalic acid in sulphuric acid medium has been investigated. Spectrophotometric results show that thallium(III) can be quantitatively reduced to thallium(I) with oxalic acid in aqueous medium when heated to near boiling point. Conditions for the estimation of the excess of oxalic acid with cerium(IV) sulphate in the presence of thallium(I) and for the estimation of a mixture of thallium(I) and thallium(III) have been investigated. The method is simpler than many other redox methods reported for the determination of thallium(III) and is free from many interferences encountered in these titrations. The reagents are cheap and quite stable.     

Sensitive spectrofluorimetric determination of ruthenium at nanotrace levels using 2-(alpha-pyridyl) thioquinaldinamide [PTQA

A new spectrofluorimetric method for the determination of ruthenium with nonfluorescent 2-(alpha-pyridyl) thioquinaldinamide (PTQA) is described. The oxidative reaction of Ru(III) upon PTQA gives oxidised fluorescent product (lambda(ex(max))=347 nm; lambda(em(max))=486 nm). The sensitivity of the fluorescence reaction between ruthenium and PTQA is greatly increased in the presence of Fe (III). The reaction is carried out in the acidity range 0.01-0.075 M H(2)SO(4). The influence of reaction variables is discussed. The range of linearity is 1-400 microg l(-1) Ru(III). The standard deviation and relative standard deviation of the developed method are +/-1.210 microg l(-1) Ru (III) and 2.4%, respectively (for 11 replicate determinations of 50 microg l(-1) Ru (III)). The effect of interferences from other metal ions, anions and complexing agents was studied; the masking action is discussed. The developed method has been successfully tested over synthetic mixtures of various base metals and platinum group metals, synthetic mixtures corresponding to osmiridium, certified reference materials in spiked conditions and rock samples.     

Highly sensitive and selective spectrophotometric method for determination of trace gold in geological samples with 5-(2-hydroxy-5-nitrophenylazo)rhodanine

A excellent sensitive and selective method for spectrophotometric determination of trace gold has been developed, the method is based on the color reaction of gold(III) with new reagent 5-(2-hydroxy-5-nitrophenylazo)rhodanine (HNAR). Under optimal conditions, HNAR reacts with gold(III) to form a 1:5 orange complex, which has an maximum absorption peak at 480 nm. Maximum enhancement of the absorbance of the complex was obtained in the presence of the mixed surfactant of Triton X-100 and CTMAB; the reaction completed rapidly and the absorbance is stable for 5 h at least at 20 degrees C; 0-48 microg L(-1) Au(III) obeyed Beer's law. The apparent molar absorptivity of the complex, Sandell's sensitivity, the limit of quantification, the limit of detection and relative standard deviation were found to be 2.0x10(6) L mol(-1) cm(-1), 0.000,098,483 micro g cm(-2), 1.02 ng mL(-1), 0.35 ng mL(-1) and 1.09%, respectively. The effect of co-existing ions was studied seriously; most metal ions can be tolerated in considerable amounts. Its sensitivity and selectivity are remarkably superior to other reagents in the literature. The proposed method was used successfully to determine trace gold in geological samples. Moreover, the synthesis, characteristics and analytical reaction of HNAR with gold are also described in detail.     

Thallimetric oxidations-VI Titrimetric and spectrophotometric methods for the determination of phosphite and analysis of binary mixtures of phosphite and oxalate

Titrimetric and spectrophotometric methods have been developed for the estimation of phosphite at mmole and mumole levels, respectively. Thallium(III) is used as an oxidant and the thallium(I) produced is determined either oxidimetrically with potassium bromate or by measurement of the absorbance of thallium(III) at 260 nm in the presence of 0.1 M hydrochloric acid and 1 M perchloric acid. Based on the fact that phosphite and oxalate are oxidized under different conditions, methods are described for the analysis of binary mixtures of phosphite and oxalate. A method is also described for estimation of thallium(III) with phosphite as reluctant, and is applied for analysis of mixtures of thallium(I) and thallium(III).