Monitoring of phenylurea and propanil herbicides in river water by solid-phase-extraction high performance liquid chromatography with photoinduced-fluorimetric detection

The separation and determination of five herbicides, including propanil and the phenylureas diuron, isoproturon, linuron and neburon, has been performed by an HPLC method, using photochemically-induced fluorescence detection. The non-fluorescent herbicides were transformed into fluorescent compounds by post-column photochemical reaction. A 60:40 (v/v) acetonitrile-buffer solution of potassium phosphate dibasic (pH 7, 0.01 M) was used for the chromatographic elution to separate propanil, linuron and neburon. The overlapping of isoproturon and diuron peaks, in the selected conditions, was resolved by changing the initial movil phase composition to 50:50 (v/v) methanol-buffer solution of potassium phosphate dibasic (pH 7, 0.01 M). The procedure was applied with satisfactory results to the analysis of these herbicides in Guadiana river water samples (Badajoz, Spain), allowing the detection of herbicide residues in the order of mug l(-1), by using a solid-phase extraction (SPE) pre-concentration step.     

Determination of phenylureas herbicides in food stuffs based on matrix solid-phase dispersion extraction and capillary electrophoresis with electrochemiluminescence detection

A new method based on matrix solid phase dispersion-capillary electrophoresis with electrochemiluminescence detection (MSPD-CE-ECL) has been developed for the simultaneous determination of three kinds of phenylurea herbicides (PHUs). Poly-β-cyclodextrin (poly-β-CD) was used as an additive in the running buffer to improve the separation of three analytes. The conditions for CE separation, ECL detection and effect of poly-β-CD were investigated in detail. Under the optimal conditions, three kinds of herbicides (isoproturon, linuron and diuron) were well separated and detected within 8 min. The linear ranges of the standard solution for isoproturon and linuron were 1-300 μg L(-1) with a detection limit (S/N=3) of 0.1 μg L(-1), and for diuron was 2-500 μg L(-1) with a detection limit of 0.2 μg L(-1). The average recoveries were in the range of 86.9-102.8%, and all relative standard deviation of the migration time and the ECL intensity in intraday and interday were less than 9.0%. The proposed method was also applied to the determination of three kinds of herbicides in green vegetable and rice samples with recoveries in the range from 78.1 to 93.8%.     

Trace analysis of herbicides in wastewaters by a dispersive liquid–liquid microextraction approach and liquid chromatography with quadrupole linear ion trap mass spectrometry: Evaluation of green parameters

An analytical method for determining phenylureas (monuron, isoproturon, diuron, linuron and neburon) and propanil herbicides in wastewater has been developed and validated, and the most significant parameters were compared with the corresponding ones found in the literature, thus showing the method performance. The method involves pre‐concentration by a simple, rapid, sensitive and low environmental toxicity temperature‐controlled ionic liquid dispersive liquid–liquid microextraction procedure. The herbicides were identified and determined by liquid chromatography with a hybrid triple quadrupole linear ion trap mass spectrometer. Data acquisition in selected‐reaction monitoring mode allowed the simultaneous identification and quantification of the analytes using two transitions. The information dependent acquisition scan was performed to carry out the identification of those analytes whose second transition was present at low intensity, also providing extra confirmation for the other analytes. Limits of quantification were in the range 1.0–5.0 ng/L. Good recoveries (95–103%) were obtained for the extraction of the target analytes in wastewater samples. The methodology developed was applied to analyze effluent wastewater samples from a wastewater treatment plant located in an agricultural zone of Almería (Spain) and the results indicated the presence of diuron at mean concentration levels of 73.5 ng/L.     

Multiresidue Analysis of Phenylurea Herbicides in Environmental and Drinking Water by Capillary Electrophoresis

The present paper describes the application of capillary electrophoresis in the micellar mode to the separation and quantitative determination of five phenylurea herbicides, viz. monuron, linuron, diuron, isoproturon, and monolinuron, in water samples. Using uncoated fused silica capillary and phosphate-borate buffer (pH 7.0) containing SDS, the five pesticides are resolved in less than 15 min and quantitatively determined by an ultraviolet detector at 244 nm. Method optimization and validation parameters are presented. Good linearity and repeatability were observed for all the compounds studied (correlation coefficients 0.999). The feasibility of the method developed was tested by simultaneous determination of these herbicides in environmental and drinking water samples at the minimum residue levels (MRLs) (0.1 μg/L) after solid-phase extraction (SPE) preconcentration procedure.     

High-performance liquid chromatography column switching applied to the trace determination of herbicides in environmental and drinking water samples

A selective and sensitive coupled-column high-performance liquid chromatographic method is developed for the simultaneous determination of 5 phenylurea herbicides (monuron, linuron, isoproturon, monolinuron, and diuron) in environmental and drinking water samples. Sample clean-up is performed automatically by means of a column switching technique. Using 2 octadecyl silica columns connected via two programmable 6-port valves and ultraviolet detection at 244 nm, the aforementioned compounds can be determined at the low concentration levels required for pesticide residue analysis in water samples. A mobile phase consisting of a mixture of methanol-water (55:45, v/v) is pumped at 1 mL/min. For the 5 phenylureas, high recoveries ranging from 94.9 to 101.6%, good reproducibility with relative standard deviations lower than 5%, and wide linear ranges up to 20 micrograms/L are observed with determination limits of 0.05 microgram/L. The method is successfully applied to the screening of different environmental water samples such as surface, ground, rain, and drinking water.     

The role of organic colloids in herbicide transfer to rivers: a quantitative study of triazine and phenylurea interactions with colloids

For moderately hydrophobic compounds such as most pesticides adsorption on colloids (<0.2 microm) may play a key role in pesticide mobility as well as in their degradation by chemical and microbiological processes. However, until now, pesticide-organic colloid interactions are poorly understood. Quantitative data for sorption equilibria on colloids of two series of herbicides including triazines (atrazine, simazine, terbutylazine, prometryne, desethylatrazine, and desisopropylatrazine) and phenylureas (isoproturon, linuron, neburon, and diuron) sampled in the Seine river (urban zone) and the Marne river (agricultural zone) are presented. Partition coefficient of herbicides on colloids (K(com)), were evaluated by solid-phase extraction coupled with high-performance liquid chromatography-UV diode-array detection (SPE-HPLC-UV/DAD). In the case of triazines a satisfactory log-log correlation was found between K(com) and octanol-water coefficient (K(ow)) values. Phenylureas did not obey this correlation, with K(com) values being about two times higher than those of triazines. The existence of two distinct types of adsorption behaviour on colloids partly explains the different occurrence of triazines and phenylureas in surface waters.     

An Investigation of Inclusion Complexes of Cyclodextrins with Phenylurea Herbicides by Photochemically-Induced Fluorescence. Analytical Applications

The effect of -cyclodextrin (-CD) and hydroxypropyl--cyclodextrin (HP--CD) upon the photochemically-induced fluorescence (PIF) properties of four phenylurea herbicides, including linuron, diuron, isoproturon and neburon has been studied. Photochemical conversion of these nonfluorescent herbicides into strongly fluorescent photoproducts was shown to occur in -CD and HP--CD aqueous media. The influence of pH, UV irradiation time and photoproduct stability on the fluorescence intensity was also investigated. In addition, the stoichiometry and formation constants of the complexes formed between herbicides and -cyclodextrin (-CD) or 2-hydroxypropyl--cyclodextrin (HP--CD) were determined. The formation constant values, ranging from 184 ± 40 to 1498 ± 245 M^-1, were calculated by applying the iterative nonlinear regression (NLR) approach to the PIF data. Linear calibrations graphs were established in the interval 1–12 g/mL, for diuron, linuron and neburon. The IUPAC limits of detection ranged between 580 and 700 ng/mL, according to the compound. Application to the analysis of phenylurea herbicides in spiked river water was also described.     

Influence of the solvent on the gas chromatographic behaviour of urea herbicides

Summary Degradation products of chlorsulfuron, chlortoluron, diuron, fluometuron, isoproturon, linuron, metabenzthiazuron, metobromuron, and monuron formed in the gas chromatographic injector have been used for identification of the respective herbicides. Mass spectra of the derived compounds were obtained with a quadrupole mass spectrometric detector working in scan mode (20–450 amu). The compounds generated often depended on the solvent used for phenylurea herbicide injection (ethanol, methanol, dichloromethane, and acetonitrile). When methanol and ethanol were used as solvents the major products formed from phenylureas were carbamic acid esters. When acetonitrile or dichloromethane were used the main derivatives were phenylisocyanates. Chlorsulfuron and metabenzthiazuron, however, generated a triazine plus a phenylsulfonamide and a benzothiazolamine, respectively, irrespective of the solvent used. Linuron and diuron behaved similarly and gave degradation products with the same mass spectra. The thermal reactions occurred instantaneously in the injector block and were promoted by the high temperature selected (300°C). Detemination of the compounds derived from urea herbicides, by use of a 30 m BP10 column and a selected ion registering (SIR) program based on two or three ions, can be used for sensitive detection of the presence of urea herbicides in environmental extracts. With standards in methanol instrument detection limits ranged from 0.1 pg for chlorsulfuron (detected as 2-chlorobenzensulfonamide) to 1 pg for monuron and metobromuron (both detected as their carbamic acid methyl esters).RSD were below 9% at the 5 ng L⁻¹ level. The response was linearly dependent on quantily (r>0.9986) in the 5 ng L⁻¹ to 25 μg L⁻¹ range. Unequivocal identification of some phenylurea herbicides was not always possible because some herbicides with similar structures, for example diuron and linuron, gave the same derivative.     

苯基脲类除草剂分子印迹聚合物的合成和识别性能研究

以N-(4-异丙基苯基)-N′-亚丁基脲为模板, 甲基丙烯酸为功能单体, 乙二醇二甲基丙烯酸酯为交联剂制备了分子印迹聚合物(MIP). 研究了MIP对苯基脲类除草剂的亲和性和选择性. 在二氯甲烷流动相中制备的MIP对异丙隆(IP)、 非草隆(FN)、 甲氧隆(MX)、 敌草隆(DU)、 绿麦隆(CT)、 枯莠隆(DF)、 灭草隆(MN)、 草不隆(NB)、 播土隆(BT)和伏草隆(FU)等除草剂呈现出较高的亲和性, 而非印迹聚合物(NIP)对文中所用的14种苯基脲类除草剂均表现出非常低的保留或几乎没有保留. 实验及Mulliken电荷计算的结果显示, 苯基脲除草剂分子中的N′原子是主要的识别位点.     

Determination of linuron and related compounds in soil by microwave-assisted solvent extraction and reversed-phase liquid chromatography with UV detection

The combination of microwave-assisted solvent extraction (MASE) and reversed-phase liquid chromatography (RPLC) with UV detection has been investigated for the efficient determination of phenylurea herbicides in soils involving the single-residue method (SRM) approach (linuron) and the multi-residue method (MRM) approach (monuron, monolinuron, isoproturon, metobromuron, diuron and linuron). Critical parameters of MASE, viz, extraction temperature, water content and extraction solvent were varied in order to optimise recoveries of the analytes while simultaneously minimising co-extraction of soil interferences. The optimised extraction procedure was applied to different types of soil with an organic carbon content of 0.4-16.7%. Besides freshly spiked soil samples, method validation included the analysis of samples with aged residues. A comparative study between the applicability of RPLC-UV without and with the use of column switching for the processing of uncleaned extracts, was carried out. For some of the tested analyte/matrix combinations the one-column approach (LC mode) is feasible. In comparison to LC, coupled-column LC (LC-LC mode) provides high selectivity in single-residue analysis (linuron) and, although less pronounced in multi-residue analysis (all six phenylurea herbicides), the clean-up performance of LC-LC improves both time of analysis and sample throughput. In the MRM approach the developed procedure involving MASE and LC-LC-UV provided acceptable recoveries (range, 80-120%) and RSDs (<12%) at levels of 10 microg/kg (n=9) and 50 microg/kg (n=7), respectively, for most analyte/matrix combinations. Recoveries from aged residue samples spiked at a level of 100 microg/kg (n=7) ranged, depending of the analyte/soil type combination, from 41-113% with RSDs ranging from 1-35%. In the SRM approach the developed LC-LC procedure was applied for the determination of linuron in 28 sandy soil samples collected in a field study. Linuron could be determined in soil with a limit of quantitation of 10 microg/kg.     

Immunoaffinity-based extraction of phenylurea herbicides using mixed antibodies against isoproturon and chlortoluron

Summary The analysis of several phenylurea herbicides in different waters is described using an immunoaffinity column clean-up and determination by high performance liquid chromatography. The pesticides were selectively retained on a solid phase extraction column containing antibodies to chlortoluron and to isoproturon immobilised onto silica. Selected phenylureas were eluted using a simple phosphate buffered saline/ethanol mixture at low pH. The immunoaffinity approach gave extracts free of interfering substances and allowed detection limits comparable to those required for pesticides in water in the European Community. The proposed method was successfully applied to the determination of chlortoluron, isoproturon, linuron and chlorbromuron in tap and river water. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Evaluation of a mixed immunosorbent for selective trace enrichment of phenylurea herbicides from plant material

A mixed immunosorbent, composed of anti-isoproturon and anti-chlortoluron antibodies immobilized on aldehyde-activated silica was evaluated for the trace enrichment and clean-up of several phenylurea herbicides from potatoes, carrots and peas. As the immunosorbent exhibited non-specific interactions with the matrix components, a previous clean-up step based on gel filtration (Sephadex G-25 PD-10 column) or anion-exchange (Power 1 × 8 Dionex column) was necessary. The coupling of gel filtration and immunosorbent with subsequent HPLC/UV determination allowed the determination of selected herbicides in potatoes in the 30 ng/g range with high precision, but for more complex samples (carrots and peas) the combination of anion-exchange resin and immunosorbent was required. With 30 ng/g spiked samples recovery rates for isoproturon, chlortoluron, metobromuron, linuron and chlorbromuron averaged 80 ± 20% (n = 5 in two consecutive days) for the whole procedure and the estimated detection limits ranged from 5 to 20 ng/g.     

Coupled-column liquid chromatography combined with postcolumn photochemical derivatization and fluorescence detection for the determination of herbicides in groundwater

This study examines the application of coupled-column LC-photochemically induced fluorimetry-fluorescence detection (LC-LC-PIF-FD), demonstrating its potential for the quantitative and selective detection of six herbicides, including propanil and the phenylureas monuron, monolinuron, chlorotoluron, diuron and neburon in groundwater samples. An AQUASIL C18 50 x 4.6 mm(2) id column coupled to an AQUASIL C18 150 x 4.6 mm(2) id column for analyte clean-up and determination were used, respectively. A simple SPE with Cl8 cartridges was carried out, yielding average recoveries between 80 and 112% (n = 6) with RSDs between 0.5 and 9%. The LODs ranged from 0.0083 to 0.0833 microg/L in the groundwater samples.     

Clean up of phenylurea herbicides in plant sample extracts using molecularly imprinted polymers

Two different molecularly imprinted polymers (MIPs) were prepared by precipitation polymerization using linuron or isoproturon (phenylurea herbicides) as templates and trifluormethacrylic acid as functional monomer. These materials were used as selective sorbents in the development of molecularly imprinted solid-phase extraction (MISPE) procedures for the determination of several phenylurea herbicides (fenuron, metoxuron, chlortoluron, isoproturon, metobromuron, and linuron) in plant samples extracts. The MISPE procedures were fully optimized and applied to the clean up of selected phenylurea herbicides in carrot, potato, corn, and pea sample extracts and finally determined by HPLC-UV at 244 nm. Although a high degree of clean up was obtained, a decrease of the MIP recognition capabilities was observed in subsequent runs. Thus, a previous clean up protocol based on the use of a non-imprinted polymer was used to prevent the loss of MIP performance and to ease the removal of interferences. Following this procedure, namely two-step MISPE, matrix compounds were almost completely removed by the non-imprinted polymer retaining the ability of MIPs to selectively rebind target analytes unaltered. The developed MISPE procedures allowed the screening of phenylurea herbicides in plant samples at concentration levels required by established European maximum residue limits.     

Evaluation and characterization of a commercial immunosorbent cartridge for the solid-phase extraction of phenylureas from aqueous matrices

The behavior and main characteristics of a commercial immunosorbent (IS) cartridge for the solid-phase extraction of phenylureas are determined in this work. The measured capacity for the analyte-antigen (isoproturon) in a new cartridge is 215 ng and, after more than 100 adsorption-desorption cycles, the remaining capacity still is approximately 70 ng, demonstrating the good stability of the bonded antibody and the interesting possibility of extensive cartridge reuse. Only isoproturon and diuron are specifically retained in this sorbent. The weak nonspecific retention of other pesticides, including other phenylureas, can be avoided by increasing the sample volume during the loading step. Thus, a very selective and sensitive method for the determination of isoproturon and diuron in natural and potable waters is developed by loading a 50-mL sample adjusted to pH 7.4 in the IS cartridge, eluting with methanol-water (60:40, v/v), and analyzing the eluate by high-performance liquid chromatography with UV detection. The clean chromatograms, low detection limits (approximately 0.1 micro g/L), and good precision (< 5%) obtained with this rapid and simple method demonstrate that immunoaffinity extraction can be an excellent alternative for sample preparation in the environmental monitoring of particular pesticides in water matrices.     

Evaluation of a mixed immunosorbent for selective trace enrichment of phenylurea herbicides from plant material

A mixed immunosorbent, composed of anti-isoproturon and anti-chlortoluron antibodies immobilized on aldehyde-activated silica was evaluated for the trace enrichment and clean-up of several phenylurea herbicides from potatoes, carrots and peas. As the immunosorbent exhibited non-specific interactions with the matrix components, a previous clean-up step based on gel filtration (Sephadex G-25 PD-10 column) or anion-exchange (Power 1 × 8 Dionex column) was necessary. The coupling of gel filtration and immunosorbent with subsequent HPLC/UV determination allowed the determination of selected herbicides in potatoes in the 30 ng/g range with high precision, but for more complex samples (carrots and peas) the combination of anion-exchange resin and immunosorbent was required. With 30 ng/g spiked samples recovery rates for isoproturon, chlortoluron, metobromuron, linuron and chlorbromuron averaged 80 ± 20% (n = 5 in two consecutive days) for the whole procedure and the estimated detection limits ranged from 5 to 20 ng/g. Received: 29 January 1998 / Revised: 4 May 1998 / Accepted: 30 May 1998     

Development of a rapid, specific fluorescence polarization immunoassay for the herbicide chlorsulfuron

A strategy for design of a derivative of chlorsulfuron, which mimics half of the herbicide molecule, was proposed. The 1-[(2-chloro)phenylsulfonyl]monoamidosuccinic acid was synthesized as a derivative of chlorsulfuron for conjugation to carrier proteins. Rabbits were immunized and the resulting polyclonal antibodies were assessed by the fluorescence polarization technique. The antibodies were highly specific to chlorsulfuron. Cross-reactivity to the structurally similar sulfonylurea and urea herbicides chlorbromuron, amidosulfuron, chlortoluron, isoproturon, diuron and linuron was less than 0.1%. A rapid fluorescence polarization immunoassay (FPIA) for chlorsulfuron detection in water samples was developed and optimized. The detection limit of chlorsulfuron in 50 μl of sample was 10 ng ml⁻¹. Total time for the measurement of 10 samples is 7 min. The proposed FPIA is suitable for rapid testing for pesticide contamination where the highest sensitivity is not critical or in combination with pre-concentration techniques.     

Phenylurea herbicides-selective polymer prepared by molecular imprinting using N-(4-isopropylphenyl)-N′-butyleneurea as dummy template

A phenylurea herbicides-selective molecularly imprinted polymer (MIP) was prepared using N-(4-isopropylphenyl)-N′-butyleneurea as a dummy template and toluene as a porogen. The experimental results showed that the optimum molar ratio of template, functional monomer (MAA) and cross-linker (EDMA) was 1:8:20. Scatchard analysis showed that two classes of binding sites were formed in the imprinted polymer with dissociation constants of 26.81 μmol l⁻¹ and 1.428 mmol l⁻¹. The affinity and selectivity of MIP for phenylurea herbicides were studied. Among the 14 phenylurea herbicides tested, the MIP prepared showed obviously high affinity and selectivity for 10 chemicals (monuron, diuron, isoproturon, fenuron, chlortoluron, difenoxuron, metoxuron, neburon, buturon and fluometuron) with dichloromethane containing 10% hexane as mobile phase while non-imprinted polymer showed very low affinity for all the phenylurea herbicides tested. The experimental and calculated results also indicated that the size and property of the group at the N′ position of phenylurea molecules have great influence on the affinity of MIP for them and the recognition site is mainly located at the N′ position of phenylurea herbicides.     

Ultra-pressure liquid chromatography-electrospray tandem mass spectrometry for multiresidue determination of pesticides in water

A multiresidue analysis method has been developed for the determination of pesticides in water by ultra-performance liquid chromatography (UPLC) combined with tandem mass spectrometry (MS/MS). The selected pesticides represent a broad range of polarity and volatility [benzoylcyclohexanedione (mesotrione and sulcotrione); chloroacetamide (acetochlor, alachlor, dimethenamide, and metolachlor); phenoxyacetic acid (2,4-D and MCPA); phenoxypropionic (dichloprop and mecoprop); phenylurea (chlortoluron, diuron, isoproturon, linuron, and metoxuron); sulfonylurea (foramsulfuron, iodosulfuron, and nicolsulfuron); triazine (atrazine, cyanazine, desethylatrazine (DEA), desisopropylatrazine (DIA), simazine, and terbutylazine)]. The analytes were extracted using solid-phase extraction (SPE). The separation was carried out on an acquity UPLC BEH C18 column (1.7 microm, 50 mm x 1 mm ID) using a gradient elution profile and mobile phase consisting of 0.1% formic acid in water and acetonitrile. The pesticides were detected with a tandem mass spectrometer after being ionised positively or negatively (depending on the molecule) using an electrospray ionisation (ESI) source. To achieve the suitable extraction conditions for sample preparation, several parameters affecting the efficiency of SPE such as the nature of the sorbent and the eluent, extractant volume and pH were studied. The best recovery was obtained by the extraction with an Oasis HLB cartridge and 3 mL of a solution of acetonitrile/dichloromethane (1:1, v/v) at pH 2. The average recoveries of the pesticides in different samples ranged from 82 to 109%. The weight least squares (WLS) linear regression was used to calculate the limits of detection and quantification (LOD and LOQ) because the dispersion was heteroskedastic. All the pesticides could be correctly quantified at a concentration level of 50 ng L(-1) and most of them could be detected at a concentration inferior or equal to 8 ng L(-1). Efficiency and robustness of this method were evaluated by the analysis of several samples of real natural water.     

Metal-organic framework-templated synthesis of magnetic nanoporous carbon as an efficient absorbent for enrichment of phenylurea herbicides

Nanoporous carbon with a high specific surface area and unique porous structure represents an attractive material as an adsorbent in analytical chemistry. In this study, a magnetic nanoporous carbon (MNC) was fabricated by direct carbonization of Co-based metal-organic framework in nitrogen atmosphere without using any additional carbon precursors. The MNC was used as an effective magnetic adsorbent for the extraction and enrichment of some phenylurea herbicides (monuron, isoproturon, diuron and buturon) in grape and bitter gourd samples prior to their determination by high performance liquid chromatography with ultraviolet detection. Several important experimental parameters that could influence the extraction efficiency were investigated and optimized. Under the optimum conditions, a good linearity was achieved in the concentration range of 1.0–100.0 ng g⁻¹ for monuron, diuron and buturon and 1.5–100.0 ng g⁻¹ for isoproturon with the correlation coefficients (r) larger than 0.9964. The limits of detection (S/N = 3) of the method were in the range from 0.17 to 0.46 ng g⁻¹. The results indicated that the MNC material was stable and efficient adsorbent for the magnetic solid-phase extraction of phenylurea herbicides and would have a great application potential for the extraction and preconcentration of more organic pollutants from real samples.