Reactions of pyridyl donors with halogens and interhalogens: an X-ray diffraction and FT-Raman investigation

Three different N-donors L, namely N-ethyl-N′-3-pyridyl-imidazolidine-4,5-dione-2-thione (1), N,N′-bis(3-pyridylmethyl)-imidazolidine-4,5-dione-2-thione (2), and tetra-2-pyridyl-pyrazine (3), bearing one, two and four pyridyl substituents, respectively, have been reacted with halogens X₂ (X = Br, I) or interhalogens XY (X = I; Y = Cl, Br). CT σ-adducts L · nXY, bearing linear N?XY moieties (L = 3; X = I; Y = Br, I; n = 2), and salts containing the protonated cationic donors H_nLⁿ⁺ (L = 1 − 3; n = 1, 2, 4), counterbalanced by Cl⁻, Br⁻, , , , , I₂Br⁻, , or anions, have been isolated. Among the reactions products, (H1⁺)Cl⁻, (H1⁺)Br⁻, , , and 3 · 2IBr have been characterised by single-crystal X-ray diffraction. The nature of the products has been elucidated based on elemental analysis and FT-Raman spectroscopy supported by MP2 and DFT calculations.     

Tetramidocavitand: strong anion receptor by well-organized four -(CO)N-H?X interactions

Resorcin[4]arene-based tetramidocavitands containing four secondary amide groups on their upper rim showed strong (R = methyl or ethyl) binding properties. The caviplex formation through hydrogen bonds of -(CO)N-H?X⁻ was supported by ¹H NMR and crystal structure analyses. In a mixture of C₂D₂Cl₄/DMSO/D₂O = 5:15:2 at 25 °C, the thermodynamic parameters for caviplex @1, ΔG (kcal mol⁻¹), ΔH (kcal mol⁻¹), and ΔS (cal K⁻¹ mol⁻¹), are −3.7, −8.6, and −16.7, respectively.     

Enthalpies of solution of 1,1,3,3-tetramethylurea in normal and branched alkanols (C2-C4) at 298.15 K

The enthalpies of solution were determined for 1,1,3,3-tetramethylurea in ethanol, 1-propanol, 2-propanol, 1-butanol, and t-butanol (2-methyl-2-propanol). Measurements were made at 298.15 K and molalities m ≅ (0.007 to 0.036) mol · kg⁻¹ with a precise isoperibol ampoule-type calorimeter. Standard enthalpies of solution and transfer from one alkanol to the other (including methanol) were calculated. The obvious relationship between the enthalpic and volumetric effects of solution of tetramethylurea in the n-alkanols (C₁-C₄) was discovered. The enthalpic effects of transfer caused by branching of the alkanol molecules, 1-propanol → 2-propanol, and 1-butanol → t-butanol, are opposite in sign and dominated by the configurational changes in the solvation environment of tetramethylurea.     

Determination of chromium, cadmium and lead in food-packaging materials by axial inductively coupled plasma time-of-flight mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) with a time-of-flight (TOF) analyser was used for the determination of chromium, cadmium and lead in six food-packaging materials (paper and paper board). The samples (0.20-0.25 g) were digested in concentrated nitric acid in a high pressure microwave oven at 180 °C within 15 min. Two different plasma conditions were applied: cool plasma conditions (0.76 kW; 0.85, 0.89 and 15.5 l min⁻¹ nebuliser, auxiliary and plasma gas flow rate, respectively) for the determination of chromium and normal plasma conditions (1.21 kW; 0.66, 0.68 and 13.6 l min⁻¹ nebuliser, auxiliary and plasma gas flow rate, respectively) for the determination of cadmium and lead. External calibration was used in combination with rhodium (40 ng g⁻¹) as an internal standard. The detection limits (DL = 3S.D./sensitivity) under the conditions used corresponded to 0.01 ng g⁻¹ (), 0.06 ng g⁻¹ (), 0.07 ng g⁻¹ (), 0.03 ng g⁻¹ () and 0.02 ng g⁻¹ ( and ). The precision (R.S.D.) for six replicate determinations (10 s integration time) of 1 and 10 ng g⁻¹ of each analyte varied from 0.72% () to 4.43% (). The contents of chromium, cadmium and lead in the examined materials were evaluated using the signals of , and . They were in the range: 0.25-0.50 μg g⁻¹ for Cr, not detected (nd) to 0.12 μg g⁻¹ for Cd and 0.28-0.35 μg g⁻¹ for Pb in paper and 0.50-0.64 μg g⁻¹ for Cr, nd to 0.09 μg g⁻¹ for Cd and 0.67-0.99 μg g⁻¹ for Pb in paper board.     

Anion sensing by Phenazine-based urea/thiourea receptors

The novel colorimetric receptors 2,3-bis-N-(9,10-diaza-anthracen-1-yl)-N′-phenylurea and 2,3-bis-N-(9,10-diaza-anthracen-1-yl)-N′-phenylthiourea have been prepared by the reaction of 2,3-diaminophenazine with phenylisocyanate and phenylisothiocyanate, respectively, in quantitative yields. The interaction and colorimetric sensing properties of receptor = 2 and 3 with different anions were investigated by naked eye, UV-vis and fluorescence spectroscopy in DMSO. The receptors effectively and selectively recognized biologically important F⁻, CH₃COO⁻, H₂P in the presence of other anions, such as Cl⁻, Br⁻, I⁻ and HS in DMSO.     

Fluxional behavior of Al(Et)(q)2 (q=2-methyl-8-quinolinolato) studied by temperature dependent H NMR spectroscopy

Two α-CH₂ hydrogens of the Et group in Al(Et)(q^′)₂ (q^′=2-methyl-8-quinolinolato) show two ¹H NMR peaks at different positions with a separation of 0.19 ppm at 25 °C, due to the presence of a chiral center at Al. On raising the temperature, the two peaks collapsed, and coalesced above 100 °C. The ¹H NMR fluxional behavior is accounted for by simultaneous rotation of the q^′ ligands, and kinetic parameters of kJ mol⁻¹, kJ mol⁻¹, J K⁻¹ mol⁻¹ are evaluated.     

A novel calix[4]arene fluorescent receptor for selective recognition of acetate anion

A novel bridged fluorescent calix[4]arene with 1,8-diaminoanthracene and glycine at the upper rim has been prepared, which exhibited selective recognition towards AcO⁻ over other anions such as F⁻, Cl⁻, Br⁻, , , I⁻ and by fluorescence spectroscopy and ¹H NMR method.     

Colorimetric and ratiometric fluorescence sensing of fluoride ions based on competitive intra- and intermolecular proton transfer

Receptors 1 and 4 show fluoride ion selective changes in their absorbance and emission behaviours amongst F⁻, Cl⁻, Br⁻, I⁻, , CH₃COO⁻, , and anions. Fluoride ion mediated ‘ON-OFF-ON’ switching behaviour of 4 provides opportunities for ratiometric estimation of fluoride ions.     

Determination of arsenic, iron and selenium in moss samples using hexapole collision cell, inductively coupled plasma-mass spectrometry

Different collision gases (H₂, He and premixed 7% H₂ in He) used in the hexapole collision cell of an inductively coupled plasma-mass spectrometer (ICP-MS) were compared, and the gas-flow rates were optimized for the determination of arsenic (), iron () and selenium (). The study showed that the argon-based interferences at mass-to-charge ratios (m/z) of 56, 75 and 80 can be overcome by the optimized gas flows (7.5 ml min⁻¹ premixed 7% H₂ in He and 2 ml min⁻¹ H₂) in the hexapole collision cell. Detection limits of 15.5 ng l⁻¹ for iron () and 29 ng l⁻¹ for selenium () in 2% (v/v) HNO₃ were obtained under optimized collision cell conditions. The detection limit for arsenic () obtained in difficult hydrochloride acid matrix (5% HCl (v/v)) was 153 ng l⁻¹. The accuracy of the optimized method was confirmed by analyzing two moss reference materials. The results obtained by ICP-MS for arsenic, selenium and iron from both moss reference samples were, in most cases, in good agreement with the certified values.     

Standard absolute entropies, S°298, from volume or density: Part II. Organic liquids and solids

The standard absolute entropies of many materials are unknown, which precludes a full understanding of their thermodynamic stabilities. We show, for both organic liquids and solids, that entropies are reliably linearly correlated with volume per molecule, V_m (nm³ per molecule) (or molar volume, M/ρ (cm³ mol⁻¹)); thus, permitting simple evaluation of standard entropies (J K⁻¹ mol⁻¹) at 298 K. The regression lines generally pass close to the origin, with formulae:For organic liquids:

     

Chemiluminescence study of carbonate and peroxynitrous acid and its application to the direct determination of nitrite based on solid surface enhancement

Peroxynitrous acid (ONOOH) was produced by the on-line mixing of acidified hydrogen peroxide with nitrite in a flow system. A strong chemiluminescent (CL) emission was observed when ONOOH reacted with carbonate without any special CL reagents. When cotton was present in the CL cell, the CL emission was enhanced significantly. The method was developed to determine nitrite, which showed a key improvement that any CL reagents and sensitizers were not used, resulting in better selectivity. The applicability of the present CL system was demonstrated for the sensitive and selective determination of nitrite in natural water samples without any special pretreatment. Good agreements were obtained for the determination of nitrite in tap and well waters between the present approach and a standard spectrophotometric method. The average precision was 4.6% (n=7) and detection limit (S/N=3) was 1.0×10⁻⁷ M. Based on the CL spectrum, UV spectra, and dissolved oxygen measurement, a possible CL mechanism was proposed. ONOOH was an unstable compound in acidic solution and could be quenched into peroxynitrite (ONOO⁻) in basic solution. ONOO⁻ reacted with CO₂ to produce ONOOCO₂⁻, which can rapidly decompose into NO₂ and CO₃⁻ radicals. In the presence of H⁺, CO₃⁻ radicals can protonate to bicarbonate radical (HCO₃). The recombination of HCO₃ radicals and decomposition can lead to light emission.     

The coordination chemistry and reactivity of amino-dithiaphospholanes with rhodium, iridium, and ruthenium

Novel amino-dithiaphospholane complexes of ruthenium, iridium, and rhodium were synthesized, and their properties were studied. Reaction of the new amino-dithiaphospholane (RS)₂ (R = binaphthyl, R′ = CH₂Ph, (rac)-4) with [RuCl₂(p-cymene)]₂ afforded [RuCl₂(p-cymene)((rac)-4)] in 67% isolated yield. Similarly, the new amino-dithiaphospholanes (RS)₂ (R = cyclohexyl, (rac)-7) and (RS)₂ (R = phenyl, 9) gave upon reaction with [RhCl(CO)₂]₂ and [IrCp^∗Cl₂]₂ the novel complexes [RhCl(CO)(L)₂] and [IrCp^∗Cl₂(L)] (L = (rac)-7, 9) in 61-96% yields. The ruthenium complex is catalytically active for the etherification of propargylic alcohols with methanol and ethanol (8-48 h, 90 °C, 40-85% isolated yields).     

Hetero dimer from tetrakisammonium cavitand and tetratopic crown ether cavitand

Hetero dimer between tetrakis(m-ammonium)cavitand and tetrakis(dibenzo-25-crown-8)cavitand 5 was formed in CDCl₃ at room temperature. The effects of solvent polarity and temperature on the stability of were studied and the thermodynamic parameters for the formation of are , ΔH⁰ = −67.4 kcal mol⁻¹ and ΔS⁰ = −201.6 cal mol⁻¹ K⁻¹.     

A computational study of SbnF5n (n = 1-4): Implications for the fluoride ion affinity of nSbF5

This contributions shows with a series of ab initio MP2 and DFT (BP86 and B3-LYP) computations with large basis sets up to cc-pVQZ quality that the literature value of the standard enthalpy of depolymerization of Sb₄F_20(g) to give SbF_5(g) (+18.5 kJ mol⁻¹) [J. Fawcett, J.H. Holloway, R.D. Peacock, D.R. Russell, J. Fluorine Chem. 20 (1982) 9] is by about 50 kJ mol⁻¹ in error and that the correct value of (Sb₄F_20(g)) is +68 ± 10 kJ mol⁻¹. We assign , , and values for Sb_nF_5n with n = 2-4 and compare the results to available experimental gas phase data. Especially the MP2/TZVPP values obtained in an indirect procedure that rely on isodesmic reactions or the highly accurate compound methods G2 and CBS-Q are in excellent agreement with the experimental data, and reproduce also the fine experimental details at temperatures of 423 and 498 K. With these data and the additional calculation of [Sb_nF_5n+1]⁻ (n = 1-4), we then assessed the fluoride ion affinities (FIAs) of Sb_nF_5n(g), nSbF_5(g), nSbF_5(l) and the standard enthalpies of formation of Sb_nF_5n(g) and [Sb_nF_5n+1]⁻_(g): FIA(Sb_nF_5n(g)) = 514 (n = 1), 559 (n = 2), 572 (n = 3) and 580 (n = 4) kJ mol⁻¹; FIA(nSbF_5(g)) = 667 (n = 2), 767 (n = 3) and 855 (n = 4) kJ mol⁻¹; FIA(nSbF_5(l)) = 434 (n = 1), 506 (n = 2), 528 (n = 3) and 534 (n = 4) kJ mol⁻¹. Error bars are approximately ±10 kJ mol⁻¹. Also the related Gibbs energies were derived. Δ_fH°([Sb_nF_5n+1]⁻_(g)) = −2064 ± 18 (n = 1), −3516 ± 25 (n = 2), −4919 ± 31 (n = 3) and −6305 ± 36 (n = 4) kJ mol⁻¹.     

Thermoanalytical study of linkage isomerism in coordination compounds: Part I. Reinvestigation of thermodynamic and thermokinetic of solid state interconversion of nitrito (ONO) and nitro (NO2) isomers of pentaaminecobalt(III) chloride by means of DSC

Solid state thermal isomerization of [Co(NH₃)₅(ONO)]Cl₂ (nitrito isomer) to [Co(NH₃)₅(NO₂)]Cl₂ (nitro isomer) and reverse reaction were investigated by non-isothermal differential scanning calorimetry (DSC) and found to be essentially an equilibrium process. The interconversions are accelerated at above 65 °C and reach to equilibrium state at about 155 °C. After establishment of the equilibrium the relative amounts of two isomers at any temperature are governed by Gibbs free energy relationship. The experimental enthalpy changes of isomerization of pure nitrito and nitro solid samples to the equilibrium state are −4.67 (±0.19) and 0.99 (±0.05) kJ mol⁻¹, respectively. From these values, total enthalpy change was calculated as: ΔH°=−5.66(±0.20) kJ mol⁻¹. Using Gibbs free energy relationship, equilibrium constant, total free energy and entropy changes were estimated at 60 °C as: K=7.72(±0.8),  kJ mol⁻¹ and  J K⁻¹ mol⁻¹.An initial rate method has been developed to determine the kinetic parameters of these reactions from non-isothermal DSC data. Both nitro to nitrito and reverse reactions obey first order kinetic law in solid state. Estimated activation parameters of forward and reverse paths at 60 °C are , , and , respectively. The negative activation entropy of both directions support the intramolecular mechanism of isomerization, including formation of a seven coordinate transition state, which formerly suggested based on spectral and X-ray methods.