CO adsorption on the Cu(1 1 1) surface: A density functional study

The adsorption of CO on the Cu(1 1 1) surface has been studied with ab initio density functional theory. The adsorbate-metal system was analyzed with the local density approximation, the gradient corrected functional of Perdew and Wang and the B3LYP hybrid functional, for comparison. A slab model was used for the pattern at a coverage of 1/3. The local density approximation and the gradient corrected functional give the fcc site as the favorable adsorption site. In contrast, the B3LYP functional results in the preference of the top site, in agreement with the experiment. These results confirm the suggested explanation for the failure of standard functionals, based on the position of the highest occupied and lowest unoccupied molecular orbital. The results of total energy calculations are presented, together with projected densities of states and Mulliken populations. In addition, the basis set superposition error is discussed for CO/Cu(1 1 1) and for CO/Pt(1 1 1).     

Adsorption structure of germanium on the Ru(0 0 0 1) surface

Coverage-dependent adsorption energy of the Ge/Ru(0 0 0 1) growth system and the geometrical distortions of the most stable adsorption structure are investigated through first-principles calculations within density functional theory. A local minimum in adsorption energy is found to be at a Ge coverage of 1/7 monolayer with a Ru(0 0 0 1)- symmetry. Based on this stale superstructure, the scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS) images are simulated by means of surface local-density of states (LDOS). The results are consistent well with the STM measurements on the phase for Ge overlayer on Ru(0 0 0 1). From this stimulation, the relations between the STM images and the lattice distortion are also clarified.     

Ge adsorption on SiC(0 0 0 1): An ab initio study

In this work we have performed an ab initio total energy investigation of the Ge adsorption process on the Si-terminated SiC(0 0 0 1)- and (3 × 3) surfaces. We find that Ge adatoms lying on the topmost sites of the and (3 × 3) surfaces represent the energetically more stable configurations at the initial stage of the Ge adsorption on the SiC(0 0 0 1) surface. The Si → Ge substitutional adsorption processes have been examined as a function of the Si and Ge chemical potentials. Increasing the Ge coverage, we verify that the formation of Ge wetting layer on the surface, and Ge nanocluster on the (3 × 3) surface are the energetically more stable configurations, in accordance with recent experimental findings.     

The local adsorption geometry and electronic structure of alanine on Cu{1 1 0}

The adsorption of alanine on Cu{1 1 0} was studied by a combination of near edge X-ray absorption fine structure (NEXAFS) spectroscopy, X-ray photoelectron spectroscopy (XPS) and density functional theory (DFT). Large chemical shifts in the C 1s, N 1s, and O 1s XP spectra were found between the alanine multilayer and the chemisorbed and pseudo-(3 × 2) alaninate layers. From C, N, and O K-shell NEXAFS spectra the tilt angles of the carboxylate group (≈26° in plane with respect to and ≈45° out of plane) and the C-N bond angle with respect to could be determined for the pseudo-(3 × 2) overlayer. Using this information three adsorption geometries could be eliminated from five p(3 × 2) structures which lead to almost identical heats of adsorption in the DFT calculations between 1.40 and 1.47 eV/molecule. Due to the small energy difference between the remaining two structures it is not unlikely that these coexist on the surface at room temperature.     

One-dimensional defects in iodine adlayers on Pt(1 0 0)

One-dimensional defect structures of closed-packed adlayers of iodine on Pt(1 0 0) were studied with scanning tunneling microscopy (STM). On the terraces of the Pt(1 0 0) surface we observed rotational domains with line defects running in [0 1 0] directions, in coexistence with nearly defect-free domains. In addition to these prevailing line defects (A-defects) with a local coverage lower than that of a defect-free surface, we report on much less frequently observed line defects with higher local coverages (B- and C-defects). The strong dependence of the concentration of these defects on the adsorption temperature is governed by the decrease of the overall iodine coverage with increasing temperature. Iodine adsorption at ∼1100 K leads to self-organization of A-defects in quasi-periodic arrangements. The relevance of these defects as important structural elements of commensurate superstructures of iodine on Pt(1 0 0) is stressed.     

Stable surface termination on vicinal 6H-SiC(0 0 0 1) surfaces

Ordered nanofacet structures on vicinal 6H-SiC(0 0 0 1) surfaces, consisting of pairs of a (0 0 0 1) basal plane and a facet, are investigated in terms of stable surface stacking of the (0 0 0 1) basal planes. The surface termination of S3 (or S3*), i.e., ABC (or A*C*B*), was suggested by a structural model based on quantized step-bunching, which typically gives a one-unit-cell bunched step configuration at the facet. Here, we evaluate the surface termination at basal planes covered with a layer of silicon oxynitride by means of quantitative low-energy electron diffraction (LEED) analysis combined with scanning tunneling microscopy (STM), and show the validity of the structural model proposed.     

NO dissociation pathways on Rh(1 0 0), (1 1 0), and (1 1 1) surfaces: A comparative density functional theory study

The chemisorption and dissociation pathways of NO on the Rh(1 0 0), (1 1 0), and (1 1 1) surfaces are studied by the plane-wave density functional theory (DFT) with CASTEP program. In addition, the electronic and geometrical effects that affect the NO dissociation reactions have been investigated in detail. The calculation results are presented as following: The effective activation energies of the best NO dissociation pathways on the Rh(1 0 0), the Rh(1 1 0), and the Rh(1 1 1) are 0.63, 0.66 and 1.77 eV, respectively. The activity of the Rh planes for NO dissociation is in the order of Rh(1 0 0) ≈ Rh(1 1 0) > Rh(1 1 1). The low dissociation barrier for Rh(1 0 0) and Rh(1 1 0) is associated with the existence of a lying-down NO structure which acts as a precursor for dissociation. By Mulliken population analysis and structure analysis, both electronic and geometrical effects are found to affect the NO dissociation reactions, but the geometrical effect exceed the electronic. The energy decomposition scheme has been used to provide further insight into the NO dissociation reactions. Based on the calculations, the interaction energy between N and O in the transition state on the Rh(1 1 1) is found much larger than that on the Rh(1 0 0) and the Rh(1 1 0). The major differences of should originate from the variation of the bonding competition effect.     

STM study of l-serine adsorption on Cu(0 0 1)

The adsorption of l-serine on Cu(0 0 1) surface at 310 K was studied by scanning tunneling microscope (STM). l-serine molecules on the Cu(0 0 1) initially formed a domain of thick lines with a order structure along the direction on the terraces regardless of the coverage of serine. The thick lines were partly replaced by thin line along the direction, and completely disappeared in 2 h. It is considered that in these structures hydrogen bonds involved in hydroxymethyl group between adsorbates play some role in addition to intermolecular hydrogen bond between a hydrogen atom of amino group and an oxygen atom of carboxy group for alanine adsorption.     

Photoemission study of the Li/Ge(1 1 1)-3 × 1 reconstruction

In this article we report our findings on the electronic structure of the Li induced Ge(1 1 1)-3 × 1 reconstruction as determined by angle-resolved ultraviolet photoelectron spectroscopy (ARUPS) and core-level spectroscopy using synchrotron radiation. The results are compared to the theoretical honeycomb-chain-channel (HCC) model for the 3 × 1 reconstruction as calculated using density functional theory (DFT). ARUPS measurements were performed in both the and directions of the 1 × 1 surface Brillouin zone at photon energies of 17 and 21.2 eV. Three surface related states were observed in the direction. In the direction, at least two surface states were seen. The calculated band structure using the single-domain HCC model for Li/Ge(1 1 1)-3 × 1 was in good agreement with experiment, allowing for the determination of the origin of the experimentally observed surface states. In the Ge 3d core-level spectra, two surface related components were identified, both at lower binding energy with respect to the Ge 3d bulk peak. Our DFT calculations of the surface core-level shifts were found to be in fair agreement with the experimental results. Finally, in contrast to the Li/Si(1 1 1)-3 × 1 case, no double bond between Ge atoms in the top layer was found.     

Coadsorption of CO and C6H6 on Co(0 0 0 1)

We have studied the influence of CO on the adsorption of benzene on the Co(0 0 0 1) surface using LEED, XPS, TDS and work function measurements. CO was found to reduce the benzene adsorption, but even at saturation CO exposure no complete blocking was observed. Thermal desorption of the coadsorbed layer featured CO and H₂ peaks indicating partial dehydrogenation of benzene and retaining of the CO bond. Ordered LEED structures were found with all coverages: Pre-adsorption of CO led to patterns already seen for pure carbon monoxide adsorption. Pre-adsorption of benzene showed the known structure of pure benzene also with small CO exposures, but higher CO exposures yielded a mixture of and patterns.     

Electronic structure of the Sb-induced Si(1 1 3)2 × 5 surface

The surface electronic structure of Sb/Si(1 1 3)2 × 5 was investigated by angle-resolved photoemission spectroscopy experiments. This reveals Sb/Si(1 1 3)2 × 5 to have three surface bands with anisotropic two-dimensional characteristics. The band widths of the surface bands along is larger than along . The number of surface bands of Sb/Si(1 1 3)2 × 5 and their band dispersions along and are quite analogous with those of Sb/Si(1 1 3)2 × 2 composed of Sb adatom and Si tetramer chains. The electronic structure analogy suggests that Sb/Si(1 1 3)2 × 5 and Sb/Si(1 1 3)2 × 2 have common building blocks such as Sb adatom and Si tetramer chains.     

GaN/LiNbO3 (0 0 0 1) interface formation calculated from first-principles

The stable adsorption sites for both Ga and N ions on the ideal and on the reconstructed LiNbO₃ (0 0 0 1) surface are determined by means of first-principle total energy calculations. A single N layer is found to be more strongly bound to the substrate than a single Ga layer. The adsorption of a GaN monolayer on the polar substrate within different orientations is then modeled. On the basis of our results, we propose a microscopic model for the GaN/LiNbO₃ interface. The GaN and LiNbO₃ (0 0 0 1) planes are parallel, but rotated by 30° each other, with in-plane epitaxial relationship [1 0 0]_GaN‖ [1 1  0]_LiNbO3. In this way the (0 0 0 1) plane lattice mismatch between GaN and LiNbO₃ is minimal and equal to 6.9% of the GaN lattice constant. The adsorbed GaN and the underlying LiNbO₃ substrate have parallel c-axes.     

CO oxidation on Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces studied by infrared chemiluminescence spectroscopy

The infrared (IR) chemiluminescence studies of CO₂ formed during steady-state CO oxidation over Pd(1 1 1), Pt(1 1 1), and Rh(1 1 1) surfaces were carried out. Analysis of their emission spectra indicates that the order of the average vibrational temperature () values of CO₂ formed during CO oxidation was as follows: Pd(1 1 1) > Pt(1 1 1) > Rh(1 1 1), and the order is coincident with the potential energy in the transition state expected by the theoretical calculations. Furthermore, it is suggested that the bending vibrational temperature () can also be influenced by the angle of O-C-O (∠_OCO) of the activated complex in the transition state, which has also been proposed by the theoretical calculations.     

First-principles study of adsorption and diffusion on Ge/Si(0 0 1)-(2 × 8) and Ge/Si(1 0 5)-(1 × 2) surfaces

Using first-principles total-energy calculations, we have investigated the adsorption and diffusion of Si and Ge adatoms on Ge/Si(0 0 1)-(2 × 8) and Ge/Si(1 0 5)-(1 × 2) surfaces. The dimer vacancy lines on Ge/Si(0 0 1)-(2 × 8) and the alternate S_A and rebonded S_B steps on Ge/Si(1 0 5)-(1 × 2) are found to strongly influence the adatom kinetics. On Ge/Si(0 0 1)-(2 × 8) surface, the fast diffusion path is found to be along the dimer vacancy line (DVL), reversing the diffusion anisotropy on Si(0 0 1). Also, there exists a repulsion between the adatom and the DVL, which is expected to increase the adatom density and hence island nucleation rate in between the DVLs. On Ge/Si(1 0 5)-(1 × 2) surface, the overall diffusion barrier of Si(Ge) along direction is relative fast with a barrier of ∼0.83(0.61) eV, despite of the large surface undulation. This indicates that the adatoms can rapidly diffuse up and down the (1 0 5)-faceted Ge hut island. The diffusion is also almost isotropic along [0 1 0] and directions.     

Surface phase diagram and temperature induced phase transitions of Sn/Cu(1 0 0)

Room temperature deposition of Sn on Cu(1 0 0) gives rise to a rich variety of surface reconstructions in the submonolayer coverage range. In this work, we report a detailed investigation on the phases appearing and their temperature stability range by using low-energy electron diffraction and surface X-ray diffraction. Previously reported reconstructions in the submonolayer range are p(2 × 2) (for 0.2 ML), p(2 × 6) (for 0.33 ML), ()R45° (for 0.5 ML), and c(4 × 4) (for 0.65 ML). We find a new phase with a structure for a coverage of 0.45 ML. Furthermore, we analyze the temperature stability of all phases. We find that two phases exhibit a temperature induced reversible phase transition: the ()R45° phase becomes ()R45° phase above 360 K, and the new phase becomes p(2 × 2) also above 360 K. The origin of these two-phase transitions is discussed.     

Structure and dynamics of the missing-row reconstruction on O/Cu(0 0 1) and O/Ag(0 0 1)

The geometry and the vibrational properties of missing row reconstructed O/Cu(0 0 1) and O/Ag(0 0 1) surfaces are investigated by means of density functional theory and density functional perturbation theory, using the local density and the generalized-gradient approximations. Our results predict very similar structural and vibrational properties for the two reconstructed surfaces. In the case of copper our calculations reproduce quite accurately the experimental results, while for the missing row reconstructed O/Ag(0 0 1) surface the agreement between theory and experiment is less satisfactory.     

Sapphire (0 0 0 1) surface modifications induced by long-pulse 1054 nm laser irradiation

We have investigated modifications of sapphire (0 0 0 1) surface with and without coating, induced by a single laser pulse with a 1054 nm wavelength, 2.2 s duration, 7.75 mm spot and energy of 20-110 J. A holographic optical element was used for smoothing the drive beam spatially, but it induced small hotspots which initiated damage on the uncoated and coated surfaces. The individual damage effects of hotspots became less pronounced at high fluences. Due to high temperature and elevated non-hydrostatic stresses upon laser irradiation, damage occurred as fracture, spallation, basal and rhombohedral twinning, melting, vitrification, the formation of nanocrystalline phases, and solid-solid phase transition. The extent of damage increased with laser fluences. The formation of regular linear patterns with three-fold symmetry ( directions) upon fracture was due to rhombohedral twinning. Nanocrystalline -Al₂O₃ formed possibly from vapor deposition on the coated surface and manifested linear, triangular and spiral growth patterns. Glass and minor amounts of -Al₂O₃ also formed from rapid quenching of the melt on this side. The - to -Al₂O₃ transition was observed on the uncoated surface in some partially spalled alumina, presumably caused by shearing. The nominal threshold for laser-induced damage is about 47 J cm⁻² for these laser pulses, and it is about 94 J cm⁻² at the hotspots.     

Modelling of phase transitions and reaction at CO adsorption on oxygen precovered Pd(1 1 1)

Using the interaction parameters up to the third neighbors and activated form of O and CO diffusion and their reaction, the model has been proposed for Monte-Carlo simulations describing the catalytic O + CO → CO₂ reaction and occurring phase transitions on Pd(1 1 1) surface. Upon adsorption of CO the pre-adsorbed oxygen transforms from p(2 × 2)_O phase into and phases in the limit of room and moderate temperatures, respectively. We demonstrate that the kinetic effects determine both the occurrence of the p(2 × 1)_O and disappearance of the phases at moderate and low temperatures, respectively. Using reaction rate as a fit parameter, we show that at room temperature the start of the reaction can be synchronized with the occurrence of phase.     

ARPES measurements on Si(1 1 1) hole subband induced by Pb and Ga adsorption

The subband dispersions in the Si(1 1 1) p-type inversion layers induced by Pb and Ga adsorbed surface structures were measured by angle-resolved photoemission spectroscopy (ARPES). The surface structures used here were and Si(1 1 1)6.3 × 6.3-Ga. is a new surface phase found in this study. Because it is significant in our study to investigate potential effects of surface superstructures on the hole subband dispersion, we investigated the subband energy levels quantitatively comparing them with those calculated using the triangular approximation. It was found that the energy separation of the adjacent subband quantum levels in the inversion layers induced by gallium adsorption does not follow the triangular approximation. The possible band bending shape was proposed to explain the quantum level spacing of the subbands in Ga-induced inversion layers.