Determination of methyl tert-butyl ether in gasoline: a comparison of three fast methods based on mass spectrometry

A high-speed quantitative analysis of methyl tert-butyl ether (MTBE) using three different methods with mass spectrometry detection has been performed. The first method is based on fast chromatography and required an analysis time of 5.23 min per sample, although a certain period (6 min) was necessary for the initial measurement conditions to be regained prior to analysing the next sample. The other two are non-separative methods and are based on direct injection and headspace generation. The analysis times were 1.5 and 3.5 min, respectively, although in the latter case an additional period of time was required to extract volatiles from the sample. The analytical characteristics of all three methods are highly satisfactory in terms of linearity, lack of fit, precision and accuracy. The methods were applied to the determination of MTBE in different gasoline samples. The non-separative methods afforded slightly higher concentrations than those found when fast chromatography was used; this is due to the presence of other minor components that contribute to the abundance of the ion at m/z 73, characteristic of MTBE. We propose a correction that removes this error very satisfactorily and allows the same results to be obtained with all three methodologies proposed.     

Comparative tests on the efficiency of three methods of methylmercury extraction in environmental samples

Mercury is used in gold mining in the Brazilian Amazon and released in significant amounts to the environment as Hg⁰. After its oxidation it may be methylated, mainly in bottom sediments and in the rhizosphere of floating aquatic macrophytes. Methylmercury (MeHg) is highly bioavailable and subject to biomagnification. The objective of this work was to evaluate the efficiency of three methylmercury extraction techniques, applied to replicates of environmental samples (stream sediments from Floresta ­da Tijuca, Rio de Janeiro; and roots of the floating macrophyte Eichhornia crassipes from Lagoinha, Rio de Janeiro) previously incubated with ²⁰³Hg²⁺. Method A is based on acid leaching and extraction of Me²⁰³Hg in toluene. Method B uses alkaline digestion, extraction in dithizone–benzene and separation of organic and inorganic ²⁰³Hg dithizonates by thin‐layer chromatography (TLC). Method C consists in separating the Me²⁰³Hg from the sample matrix by distillation. Total ²⁰³Hg and Me²⁰³Hg were detected by gamma spectrometry or liquid scintillation. For both matrices, Me²⁰³Hg extraction efficiency was better for smaller samples (range: 0.08–0.5 g for sediment, 0.1–0.5 g for E. crassipes roots). For the sediment samples, the three selected methods presented similar Me²⁰³Hg extraction efficiencies: 7–13, 5–14 and 4–17% of total added ²⁰³Hg was found as MeHg for procedures A, B and C, respectively. For E. crassipes roots, on the other hand, a lower extraction efficiency was obtained for the procedure C (11–28% of total ²⁰³Hg present as Me²⁰³Hg) than for methods B (22–36%) and A (20–44%). In all the root samples prepared with procedure B, a strong and durable chemiluminescence effect was observed, which required measuring the final Me²⁰³Hg extracts by gamma spectrometry only. In the specific conditions we used, extraction via distillation required re‐extraction of Me²⁰³Hg in the distillate, due to the presence of traces of inorganic ²⁰³Hg in the latter. Copyright © 1999 John Wiley & Sons, Ltd.     

Tutorial on estimating the limit of detection using LC-MS analysis,part I: Theoretical review

A large body of literature exists on the limit of detection (LOD), but there is still a lot of confusion about this important validation parameter. This confusion mainly stems from its statistically complex background. The goal of this two-part tutorial is to discuss and clarify the topic of LOD for practitioners. The two main conclusions of this tutorial are: (1) the choice of how to estimate LOD should be based on the purpose of the analytical method that is being validated (e.g. considerable effort should not be made to estimate LOD for a method that is not used for detecting traces in the vicinity of LOD), and (2) LOD estimates are strongly dependent on different assumptions and the approach used, and therefore caution must be exercised when using the estimate or when comparing different estimates.     

Tutorial on estimating the limit of detection using LC-MS analysis,part II: Practical aspects

In part II of this tutorial, the investigated approaches of estimating the limit of detection (LOD) are applied to experimental data from LC-MS measurements. Important practical aspects specific to LC-MS and related to LOD are reviewed. The results of different tests of estimating linearity and scedasticity are compared. LOD estimates obtained with different approaches (for both simple characterization of the analysis method and accurate interpretation of the results) are applied to the data and the obtained values are compared. As a conclusion, a decision tree is proposed for estimating LOD for analytical methods using the LC-MS technique.     

A simple strategy for determining ethanol in all types of alcoholic beverages based on its on-line liquid-liquid extraction with chloroform, using a flow injection system and Fourier transform infrared spectrometric detection in the mid-IR

In this work, a simple strategy for the determination of ethanol in all types of alcoholic beverages using Fourier transform infrared spectrometric detection has been developed. The methodological proposal includes the quantitative on-line liquid-liquid extraction of ethanol with chloroform, through a sandwich type cell equipped with a PTFE membrane, using a two-channel manifold; and direct measurement of the analyte in the organic phase, by means of Fourier transform infrared spectrometry. The quantification was carried out measuring the ethanol absorbance at 877 cm⁻¹_, corrected by means of a baseline established between 844 and 929 cm⁻¹. The procedure, which does not require any sample pretreatment (except for the simple degassing of beer and gassy wine samples, and a simple dilution of spirits with water), was applied to determine ethanol in different alcoholic beverages such as beers, wines and spirits. The results obtained highly agree with those obtained by a derivative FTIR spectrometric procedure, and by head space-gas chromatography with FID detection. The proposed method is simple, fast, precise and accurate. Moreover, it can be easily adapted to any infrared spectrometer equipped with a standard transmission IR cell, and provides attractive analytical features, which are comparable to, or better than those offered by other published methods. In consequence, it represents a valid alternative for the determination of ethanol in alcoholic beverages, and could be suitable for the routine control analysis.     

基于气相色谱-质谱联用与液相色谱-质谱联用的非靶向代谢组学用于3类茶叶中化学成分分析（英文）

茶叶中的化学成分是构成其风味特征的物质基础。本研究建立了基于气相色谱-质谱联用和液相色谱-质谱联用的非靶向代谢组学方法。完成预处理及分析条件优化后,使用标准样品考察方法的线性、回收率及重复性,结果表明方法整体稳定且结果可靠。将该方法用于绿茶、乌龙茶和红茶中化学成分的分析。通过超声辅助溶剂提取及气相色谱-质谱联用分析共获得1812个特征峰,而使用加热溶剂提取及液相色谱-质谱联用分析可获得2608个特征峰。结合保留规律及质谱数据库,共定性173种化合物(109种随后经标准样品验证),其中只有9种化合物在上述两类分析中被同时检出,表明方法互补性良好。3类茶叶数据的偏最小二乘判别分析结果表明,三者间存在显著差异。结合模型的变量重要因子(VIP)与非参数检验共筛选出90种化合物,其中包含儿茶素、氨基酸、糖、有机酸和黄酮苷类等众多与茶叶滋味密切相关的化学成分。     

Analytical chemistry of the persistent organic pollutants identified in the Stockholm Convention: A review

Persistent organic pollutants (POPs) are major environmental concern due to their persistence, long-range transportability, bio-accumulation and potentially adverse effects on living organisms. Analytical chemistry plays an essential role in the measurement of POPs and provides important information on their distribution and environmental transformations. Much effort has been devoted during the last two decades to the development of faster, safer, more reliable and more sensitive analytical techniques for these pollutants. Since the Stockholm Convention (SC) on POPs was adopted 12 years ago, analytical methods have been extensively developed. This review article introduces recent analytical techniques and applications for the determination of POPs in environmental and biota samples, and summarizes the extraction, separation and instrumental analyses of the halogenated POPs. Also, this review covers important aspects for the analyses of SC POPs (e.g. lipid determination and quality assurance/quality control (QA/QC)), and finally discusses future trends for improving the POPs analyses and for potential new POPs.     

Multisyringe flow injection analysis hyphenated with liquid core waveguides for the development of cleaner spectroscopic analytical methods: improved determination of chloride in waters

In this work, the hyphenation of the multisyringe flow injection analysis technique with a 100-cm-long pathlength liquid core waveguide has been accomplished. The Cl⁻/Hg(SCN)₂/Fe³⁺ reaction system for the spectrophotometric determination of chloride (Cl⁻) in waters was used as chemical model. As a result, this classic analytical methodology has been improved, minimizing dramatically the consumption of reagents, in particular, that of the highly biotoxic chemical Hg(SCN)₂. The proposed method features a linear dynamic range composed of two steps between (1) 0.2–2 and (2) 2–8 mg Cl⁻ L⁻¹, thus extended applicability due to on-line sample dilution (up to 400 mg Cl⁻ L⁻¹). It also presents improved limits of detection and quantification of 0.06 and 0.20 mg Cl⁻ L⁻¹, respectively. The coefficient of variation and the injection throughput were 1.3% (n = 10, 2 mg Cl⁻ L⁻¹) and 21 h⁻¹. Furthermore, a very low consumption of reagents per Cl⁻ determination of 0.2 μg Hg(II) and 28 μg Fe³⁺ has been achieved. The method was successfully applied to the determination of Cl⁻ in different types of water samples. Finally, the proposed system is critically compared from a green analytical chemistry point of view against other flow systems for the same purpose.     

Compound-specific stable isotope analysis of organic contaminants in natural environments: a critical review of the state of the art,prospects, and future challenges

Compound-specific stable isotope analysis (CSIA) using gas chromatography-isotope ratio mass spectrometry (GC/IRMS) has developed into a mature analytical method in many application areas over the last decade. This is in particular true for carbon isotope analysis, whereas measurements of the other elements amenable to CSIA (hydrogen, nitrogen, oxygen) are much less routine. In environmental sciences, successful applications to date include (i) the allocation of contaminant sources on a local, regional, and global scale, (ii) the identification and quantification of (bio)transformation reactions on scales ranging from batch experiments to contaminated field sites, and (iii) the characterization of elementary reaction mechanisms that govern product formation. These three application areas are discussed in detail. The investigated spectrum of compounds comprises mainly n-alkanes, monoaromatics such as benzene and toluene, methyl tert-butyl ether (MTBE), polycyclic aromatic hydrocarbons (PAHs), and chlorinated hydrocarbons such as tetrachloromethane, trichloroethylene, and polychlorinated biphenyls (PCBs). Future research directions are primarily set by the state of the art in analytical instrumentation and method development. Approaches to utilize HPLC separation in CSIA, the enhancement of sensitivity of CSIA to allow field investigations in the µg L^–1 range, and the development of methods for CSIA of other elements are reviewed. Furthermore, an alternative scheme to evaluate isotope data is outlined that would enable estimates of position-specific kinetic isotope effects and, thus, allow one to extract mechanistic chemical and biochemical information.Abbreviations BTEX benzene, toluene, ethylbenzene, xylenes - MTBE methyl tert-butyl ether - PAHs polycyclic aromatic hydrocarbons - VOCs volatile compounds - PCBs polychlorinated biphenyls - CSIA compound-specific (stable) isotope (ratio) analysis - GC-IRMS, GC/IRMS or GCIRMS gas chromatography-isotope ratio mass spectrometry - GC-C-IRMS, GC/C/IRMS or GCC-IRMS gas chromatography-combustion-isotope ratio mass spectrometry - irmGC/MS isotope ratio monitoring gas chromatograph-mass spectrometry - GC/P/IRMS gas chromatography-pyrolysis-isotope ratio mass spectrometry (used for D/H) - KIE kinetic isotope effect - PSIA position-specific isotope analysis (for intramolecular isotope distribution) - SNIF-NMR site-specific natural isotopic fractionation by nuclear magnetic resonance spectroscopy     

Determination of rare earth element in carbonate using laser-ablation inductively-coupled plasma mass spectrometry: an examination of the influence of the matrix on laser-ablation inductively-coupled plasma mass spectrometry analysis

In this study, we examined the influence of the matrix on rare earth element (REE) analyses of carbonate with laser-ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) using carbonate and NIST glass standards. A UV 213 nm Nd:YAG laser system was coupled to an ICP-MS. Laser-ablation was carried out in both He and Ar atmospheres to investigate the influence of ablation gas on the analytical results. A small amount of N₂ gas was added to the carrier gas to enhance the signal intensities. Synthetic CaCO₃ standards, doped with REEs, as well as NIST glasses (NIST SRM 610 and 612) were used as calibration standards. Carbonatite, which is composed of pure calcite, was analyzed as carbonate samples. The degree of the influence of the matrix on the results was evaluated by comparing the results, which were calibrated by the synthetic CaCO₃ and NIST glass standards. With laser-ablation in a He atmosphere, the differences between the results calibrated by the synthetic CaCO₃ and NIST glass standards were less than 10% across the REE series, except for those of La which were 25%. In contrast, for the measurements made in an Ar atmosphere, the results calibrated by the synthetic CaCO₃ and NIST glass standards differed by 25-40%. It was demonstrated that the LA-ICP-MS system can provide quantitative analysis of REE concentrations in carbonate samples using non matrix-matched standards of NIST glasses.     

Application of thermodynamics in a specific force field to the adsorption of Al ions on the chelating resins Ostsorb Oxin, Ostsorb Salicyl, Spheron Oxin, and Spheron Salicyl: Mathematical analysis of sorption isotherms using nonlinear mean square software

The sorption mechanism of Al³⁺ on chelating resins by means of mathematical analysis of sorption isotherms using nonlinear mean square software was studied. This method should yield more detailed information than classical thermodynamics and should be more flexible than the statistical-mechanical method, so that it would make it possible to obtain fairly easily relations directly applicable in practice. This model defined the specific potential Φ_Al^R for the ion in a resin (which depends on properties of resin and ion). On the basis of this model, N and PO isotherms were derived. To study the sorption mechanism, the Freundlich, Langmuir, N and PO equations (models) of isotherms were used. It was estimated that the functional groups (8-hydroxyquinoline and salicylate) in the studied chelating resins influence Φ_Al^R and thus their mechanism and sorption capacity.