Cloud point extraction of lanthanide(III) ions via use of Triton X-100 without and with water-soluble calixarenes as added chelating agents

The use of water-soluble calixarenes: p-sulfonato thiacalixarene (ST), tetra-sulfonatomethylated calix[4]resorcinarene (SR), calix[4]resorcinarene phosphonic acid (PhR) as chelating agents in cloud point extraction (CPE) of La(III), Gd(III) and Yb(III) ions using Triton X-100 as non-ionic surfactant is introduced. The data obtained indicate that both complexation ability and structure of calixarenes govern the extraction efficiency of lanthanides. In particular ST and SR, forming 1:1 lanthanide complexes with similar stability in aqueous media, exhibit different extractability when used as chelating agents in CPE. First synthesized PhR was found to be the most efficient chelating agent exhibiting pH-dependent selectivity within La(III), Gd(III) and Yb(III) in CPE.     

Monitoring the elimination of gadolinium-based pharmaceuticals. Cloud point preconcentration and spectrophotometric determination of Gd(III)-2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminophenol in urine

An extraction methodology based on cloud point phase separation of non-ionic surfactants has been developed for the preconcentration of ppb amounts of gadolinium in urine as a prior step to its determination by an absorptiometric procedure. A method based on the formation of complexes with 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminophenol was used for the extraction of Gd(III) in the surfactant-rich phase of non-ionic surfactant polyethyleneglycolmono-p-nonylphenylether (PONPE 7.5). The variables affecting the combined preconcentration-absorptiometric method have been evaluated and optimised. The extraction efficiency, linearity, and the limit of detection (LOD) of the method were determined. The optimised procedure was applied to determine total and free Gd(III) contents in real urine samples of patients after the NMR imaging diagnostic examination with contrast agent.     

Micellar extraction of the lanthanide ions from acidic media

A procedure of micellar extraction of the lanthanide ions (La, Gd, and Lu) from nitric acid media based on the use of novel phosphine oxide derivatives is developed. In the micellar extraction, complexes of the lanthanide ions with the extractant in the ratio of 1 : 2 (metal : extractant) form. The dependence of the selectivity of extraction on the length of hydrophobic radicals attached to the P=O group was shown. The conditions of the selective micellar extraction in the series La > Gd > Lu with the use of an extractant containing octyl substituents at the P=O group were found.     

Uranium micelle-mediated extraction in acetate medium: factorial design optimization

A micelle-mediated extraction (CPE) procedure has been developed to remove trace amounts of uranium from wastewater using a non-ionic surfactant (Triton (X-100)) and lipophilic chelating extracting agent (D2EHPA) in acetate medium. The methodology used is based on the formation of metal complexes soluble in a micellar phase of a non-ionic surfactant. The uranyl ions complexes are then extracted into the surfactant-rich phase at a ambient temperature. The effects of different operating parameters such as the concentrations of Triton (X-100), D2EHPA and metal ions, temperature, sodium acetate rate and pH on the cloud point extraction of uranyl ions were studied in details and a set of optimum conditions were obtained. The results showed, without contribution of energy (ambient temperature), that up to 1000?ppm of uranyl ions can quantitatively be removed (>97?%) in a single CPE extraction using optimum conditions.     

Salting-out surfactant extraction of porphyrins and metalloporphyrin from aqueous non-ionic surfactant solutions

A number of cloud point temperature-depressing electrolytes have been investigated for the separation of a non-ionic surfactant (Triton X-100) from aqueous solutions and the corresponding extraction of the organic solutes into the smaller volume surfactant-rich phase using the salting-out method. High extraction efficiencies and preconcentration factors were obtained at room temperature for the extraction of several hydrophilic and hydrophobic metal-free porphyrins (uroporphyrin, coproporphyrin, protoporphyrin and hematoporphyrin) and one metalloporphyrin (iron-protoporphyrin) that were dissolved in the aqueous non-ionic surfactant solutions. Possible mechanisms responsible for the efficient extraction of these important biological molecules into the surfactant-rich layer are discussed.     

Effect of ionic liquids on the extraction of rare-earth elements by bidentate neutral organophosphorus compounds from chloride solutions

The partition of microamounts of lanthanide chlorides (Ln = La, Ce, Pr, Nd, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y) between aqueous HCl and organic solutions of tetraphenylmethylenediphosphine dioxide, diphenyl(diethylcarbamoylmethyl)phosphine oxide, and dibutyl(diethylcarbamoylmethyl)phosphine oxide was studied in the presence of ionic liquids (ILs): 1-butyl-3-methylimidazolium hexafluorophosphate and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. The stoichiometry of extracted complexes was determined. The effect of the aqueous HCl concentration, the nature of the extractant, and the organic diluent on the efficiency of lanthanide extraction was studied.     

Separation and preconcentration by cloud point extraction procedures for determination of ions: recent trends and applications

The cloud point extraction procedure is an alternative to liquid–liquid extraction and based on the phase separation that occurs in aqueous solutions of non-ionic surfactants when heated above the so-called cloud point temperature. We review the more recent applications for determination of ions by means of this procedure for sample preparation over the range 2009 to first part of 2011. Following an introduction, the article covers aspects of cloud point extraction of one metal ion, two metals ions simultaneously, three metal ions simultaneously, multielement analysis, anions analysis, and on-line cloud point extraction. One hundred sixteen references are cited.

Studies on the extraction and separation of lanthanide ions with a synergistic extraction system combined with 1,4,10,13-tetrathia-7,16-diazacyclooctadecane and lauric acid

1,4,10,13-Tetrathia-7,16-diazacyclooctadecane (ATCO) and its binary extraction system containing lauric acid were studied extensively as extractants of lanthanide (M(3+)=La(3+), Ce(3+), Pr(3+), Nd(3+), Sm(3+), Eu(3+) and Gd(3+)) in 1,2-dichloroethane solution. The percentage extraction of Ce(3+) and Eu(3+) by ATCO were only measured to be less than 5% during a pH range 5.5-7.0 in NCS(-), ClO(4)(-) and PF(6)(-) mediums respectively, which indicates that ATCO alone has very low extractability to lanthanide, due to the bad fit of metal ions in its cavity. However, when lauric acid was added to the ATCO organic phase, because of forming rare earth adduct, the percentage extraction for lanthanide until Gd(3+) was enhanced in the binary system in comparison with that did not adopt the lauric acid within the pH range 6-7. The extraction species and extraction equilibrium constants logK(ex) were found to be CeLA(3)3HA, -8.5, EuLA(3)HA, -6.7, and GdLA(2)NO(3)2HA, -1.8, respectively. The separation factor between Eu(3+) and Ce(3+) was found to be 2.5, however, poor selectivity for lanthanide was observed. From Gd(3+) to Er(3+) and Lu(3+), the synergistic effect of the binary extraction system decreases with increasing atomic number. For gadolinium, the synergistic effect becomes much weaker than that of Ce(3+) and Eu(3+), no synergistic effect existed for erbium and lutetium. Thermodynamic data for synergistic solvent extraction are also reported in this paper. The order of organic phase stability constants of the extraction species is Sm (5.8)>Pr (5.7)>Eu (5.6)>Ce (5.3)>La (5.2)>Gd (2.8).     

On the flocculation and re-dissolution of trivalent lanthanide metal ions by sodium dodecyl sulfate in aqueous solutions

The interaction between aqueous solutions of trivalent lanthanide ions (M(3+): La(III) and Gd(III) and Tb (III)) at fixed (1mM) concentrations and various concentrations of sodium dodecyl sulfate (SDS), ranging from pre- to post-micellar, has been investigated by ICP-AES (La(III) and Gd(III)), luminescence spectra (Gd(III)) and lifetimes (Tb(III)) and (139)La NMR spectroscopy. It has been found that at concentration ratios, r=[SDS]/[M(3+)], around the charge neutralization value (ca. 3), dodecyl sulfate (DS(-)) anion interacts with the metal ions to form insoluble aggregates. The metal ion-DS(-) complexes remain flocculated for r values below 5-6 (Gd(III) and La(III), respectively), while at higher r values, re-dissolution takes place. The flocculated aggregates have been characterized by X-ray powder diffraction, and show a lamellar structure. Job plot method indicates that a complex with a 1:3 (M(3+):DS(-)) stoichiometry is formed. From ICP-AES analysis, a model based on a three-step mechanism has been developed and association constants calculated. For all systems the interaction between DS(-) and metal ions follows an associative process with K values ranging between K(1)=10 and K(3)=10(4). These data are discussed on the basis of the physical-chemical characteristics of the metal ions. Re-dissolution with increasing surfactant concentration is attributed to formation of mixed lanthanide/sodium dodecyl sulfate aggregates, with the relative lanthanide fraction in these species decreasing with increasing SDS concentration.     

Extraction Kinetics of Rare Earth Elements with sec—Octyl—phenoxy Acetic Acid

ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｉｓｗｅｌｌｋｎｏｗｎｔｈａｔｙｔｔｒｉｕｍｃａｎｂｅｕｓｅｄｉｎｍａｎｙｆｉｅｌｄｓ ,ｓｕｃｈａｓｍｅｔａｌｌｕｒｇｙ ,ｃｅｒａｍｉｃｓ ,ｌａｓｅｒｓａｎｄｅｌｅｃｔｒｏｎ ｉｃｓ ,ｅｓｐｅｃｉａｌｌｙｉｎｆｌｕｏｒｅｓｃｅｎｔｍａｔｅｒｉａｌｓｗｈｏｓｅｎｅｅｄｆｏｒｈｉｇｈｐｕｒｉｔｙｙｔｔｒｉｕｍｏｘｉｄｅｉｓｉｎｃｒｅａｓｉｎｇ .ＩｎＣｈｉｎａ ,ｔｈｅｒｅ ｓｏｕｒｃｅｏｆｙｔｔｒｉｕｍｉｓｒｉｃｈ ,ａｎｄｔｈｅｈｉｇｈｐｕｒｅｙｔｔｒｉｕｍｉｓｂｅ ｉｎｇｏ…     

Cloud point extraction for the determination of As(III) in water samples by electrothermal atomic absorption spectrometry

Cloud point extraction was applied as a preconcentration step for electrothermal atomic absorption spectrometry (ETAAS) determination of As(III) in aqueous solutions. After complexation with ammonium pyrrolidinedithiocarbamate, the analyte was quantitatively extracted to the surfactant-rich phase in the non-ionic surfactant octylphenoxypolyethoxyethanol (Triton X-114) after centrifugation. 0.1 mol L⁻¹ HNO₃ in methanol was added to the surfactant-rich phase before ETAAS determination. The precision (R.S.D.) for 11 replicate determinations of 5.0 μg L⁻¹ of As(III) was 3.0%. The concentration factor, which is defined as the concentration ratio of the analyte in the final diluted surfactant-rich extract ready for ETAAS determination and in the initial solution, was 36 for As(III). The linear concentration range was from 0.1 to 20 μg L⁻¹. The developed method was applied to the determination of As(III) in lake water and river water.     

1-(2-pyridylazo)-2-naphthol (PAN) as extractant in solid-liquid extraction of some trivalent rare earth elements

In the present paper, solid-liquid extraction behaviour of RE(III) (RE La, Ce, Pr, Nd, Sm, Gd, Dy and Yb) by the use of 1-(2-pyridylazo)-2-naphthol (PAN, HL) as an extractant in paraffin (m.p. 48 approximately 50 degrees) has been investigated at 80 +/- 0.07 degrees. The effect of equilibrium time, pH of aqueous phase, concentration of extractant in paraffin and solid diluent as well as buffer solution used on the extraction efficiency of RE(III) have been discussed. The extraction reaction is RE(3+) + 2HL(o) + Cl(-) <==> REL(2)Cl(o) + 2H(+).     

Detection of radionuclides in aqueous samples using cloud point extraction

A cloud point extraction method followed by inductively coupled plasma-mass spectrometry (ICP-MS) has been developed for the detection of trivalent lanthanides (Ln(III)) in aqueous samples. Ammonium pyrrolodinedithiocarbamate (APDC) was used as the chelating ligand with 2 wt% Triton X-114 as the surfactant. Various experimental parameters were investigated and the extraction efficiency, distribution ratios and concentration factors for the extraction of lanthanum (La), neodymium (Nd), europium (Eu) and thulium (Tm) were determined.     

Lanthanide(III) complexes with a tetrapyridine pendant-armed macrocyclic ligand: 1H NMR structural determination in solution, X-ray diffraction, and density-functional theory calculations

Complexes between the tetrapyridyl pendant-armed macrocyclic ligand (L) and the trivalent lanthanide ions have been synthesized, and structural studies have been made both in the solid state and in aqueous solution. The crystal structures of the La, Ce, Pr, Gd, Tb, Er, and Tm complexes have been determined by single-crystal X-ray crystallography. In the solid state, all the cation complexes show a 10-coordinated geometry close to a distorted bicapped antiprism, with the pyridine pendants situated alternatively above and below the main plane of the macrocycle. The conformations of the two five-membered chelate rings present in the complexes change along the lanthanide series. The La(III) and Ce(III) complexes show a lambdadelta (or deltalambda) conformation, while the complexes of the heavier lanthanide ions present lambdalambda (or deltadelta) conformation. The cationic [Ln(L)]3+ complexes (Ln = La, Pr, Eu, Tb, and Tm) were also characterized by theoretical calculations at the density-functional theory (DFT) B3LYP level. The theoretical calculations predict a stabilization of the lambdalambda (or deltadelta) conformation on decreasing the ionic radius of the Ln(III) ion, in agreement with the experimental evidence. The solution structures show a good agreement with the calculated ones, as demonstrated by paramagnetic NMR measurements (lanthanide induced shifts and relaxation rate enhancements). The 1H NMR spectra indicate an effective D2 symmetry of the complexes in D2O solution. The 1H lanthanide induced shifts (LIS) observed for the Ce(III), Tm(III), and Yb(III) complexes can be fit to a theoretical model assuming that dipolar contributions are dominant for all protons. The resulting calculated values are consistent with highly rhombic magnetic susceptibility tensors with the magnetic axes being coincident with the symmetry axes of the molecule. In contrast with the solid-state structure, the analysis of the LIS data indicates that the Ce(III) complexes present a lambdalambda (or deltadelta) conformation in solution.     

Synthesis, characterization and DNA interaction studies of complexes of lanthanide nitrates with tris(2-[(3,4-dihydroxybenzylidene)imino]ethyl)amine

A new tripodal, hydroxyl-rich ligand, tris{2-[(3,4-dihydroxybenzylidene)imino]ethyl}amine (L), and its complexes with lanthanide nitrates were synthesized. These complexes which are stable in air with the general formula of [LnL(NO(3))(2)]NO(3).H(2)O (Ln=La, Sm, Eu, Gd, Y) were characterized by molar conductivity, elemental analysis, IR spectra and thermal analysis. The NO(3)(-) groups coordinated to lanthanide mono-dentately, and the coordination number in these complexes may be 8. The interaction of complexes with DNA were investigated by ultraviolet and fluorescent spectra, which showed that the binding mode of complexes with DNA was intercalation, and the binding affinity with DNA were La(III) complex>Sm(III) complex>Eu(III) complex>Gd(III) complex>Y(III) complex. Based on these results, it can be shown that the La(III)complex is promising candidate for therapeutic reagents and DNA probes.     

Evaluation of the factors affecting extraction of organic compounds based on the acid-induced phase cloud point approach

On the basis of a better analytical exploitation of acid-induced cloud point approach, a systematic study on the phase behaviour of acid aqueous solutions of anionic surfactants and factors affecting anionic surfactant-mediated extractions was performed. The anionic surfactants investigated were alkylsulphonates (ASS) with alkylchain lengths comprised between 8 and 16 carbon atoms. The critical hydrochloric acid concentration (minimal acid concentration required to separation in two liquid phases) was found to increase as alkylchain length of the anionic surfactant increased from 10 to 14. Non-acid-induced liquid-liquid phase separation was observed for sodium octanesulphonate (SOS) or sodium hexadecyl sulphonate (SHS) in the hydrochloric concentration range 0-10 M. Acid aqueous solutions of sodium decylsulphonate (SDeS) and sodium dodecylsulphonate (SDoS) separated into two liquid phases at temperatures ranging between 10 and 80 °C, while temperatures >35 °C were required for sodium tetradecylsulphonate. The influence on extraction efficiency and concentrating ability of experimental variables such as hydrophobicity and concentration of surfactant, nature and concentration of analyte, hydrochloric acid concentration, time and temperature of extraction and time of equilibration and centrifugation was examined. Advantages provided by anionic surfactant-mediated extractions over the use of non-ionic surfactants (cloud point extractions) are discussed.     

Screening of urinary coproporphyrin using cloud point extraction and chemiluminescence detection

A simple screening test was developed for the sensitive and selective measurement of urinary coproporphyrin. In this screening test, efficient and selective extraction/pre-concentration of coproporphyrin from the aqueous medium(urine) into a much smaller volume phase containing a common non-ionic surfactant (Triton X-100) and ethyl acetate was accomplished by the addition of a relatively large amount of a cloud point depressing electrolyte (K(3)PO(4)) into the sample solution to effect cloud point separation. Sensitive and selective detection of coproporphyrin in the mixed Triton X-100 and ethyl acetate phase was performed via chemical excitation using the peroxyoxalate chemiluminescence reaction. The effects of surfactant and cations (from the cloud point depressing electrolyte) on the chemiluminescence intensity of coproporphyrin were briefly investigated. Furthermore, the spectrum of urinary coproporphyrin obtained using the present chemiluminescence method was briefly compared with that obtained from fluorescence method.     

Combination of size selective binding ability of 18-crown-6 dissolved in aqueous phase and extractive properties of an amic acid; toward enhancement of rare earths separation

The separation of La(III), Eu(III) and Er(III) ions by an amic acid, N,N-dioctyldiglycolamic acid (HL), dissolved in carbon tetrachloride has been improved in the presence of 18-crown-6 (18C6) in aqueous phase as a selective masking agent. The interaction between the studied metal ions and 18C6 resulted a shift in the extraction curve of the studied metal ions versus pH toward higher pH region. The displacement of the extraction curves was more pronounced for lanthanum ions and was varied as La(III) > Eu(III) > Er(III). This order of complexing ability of 18C6 toward the studied ions was attributed to the size adaptation of the ions and that of the crown ether cavity. The stability constants of the lanthanide–crown ether complexes in aqueous phase were evaluated. The influence of temperature on the extraction of studied metal ions from aqueous phase in the absence and the presence of 18C6 was tested in the range 298–308 K. This investigation allowed evaluating the thermodynamic parameters associated with the extraction process and those of the complexation of cations by 18C6 in the aqueous phase.     

Use of surfactant-mediated phase separation (cloud point extraction) with affinity ligands for the extraction of hydrophilic proteins

The feasibility of utilizing a zwitterionic surfactant, 3-(nonyldimethylammonio)propylsulfate, or nonionic surfactant, Triton X-114, mediated phase separation in conjunction with affinity ligands was studied for hydrophilic protein extractions. Below (or above) its critical temperature (so-called cloud point), aqueous solutions of zwitterionic (or nonionic) surfactants separate into two immiscible phases, a surfactant-rich phase and an aqueous phase. Avidin was successfully extracted into the zwitterionic surfactant-rich phase when a small amount of the affinity ligand, N- biotinoyl)dipalmitoyl- l -alpha- phosphatidyl ethanolamine, was added to the system. It was not possible to extract hexokinase into the surfactant-rich phase of the nonionic surfactant, Triton X-114, even if a considerable amount of octyl-beta-d-glucoside was added to the solution as an affinity ligand. In contrast, the use of the zwitterionic surfactant and octyl-beta-d-glucoside as an affinity ligand proved to be effective for the extraction of hexokinase. The hexokinase extraction efficiency was found to depend upon the solution pH and the concentration of the affinity ligand in the system. The results clearly indicate that hydrophilic proteins can be successfully extracted with surfactant mediated phase separations (cloud point extractions) via use of the zwitterionic surfactant, 3-(nonyldimethylammonio)propylsulfate, and appropriate affinity ligands. Some advantages of zwitterionic surfactants in such extractive processes relative to that of nonionic surfactants are delineated.     

Lanthanide complexes of new nonadentate imino-phosphonate ligands derived from 1,4,7-triazacyclononane: synthesis, structural characterisation and NMR studies

The polyamino ligand 1,4,7-tris(2-aminoethyl)-1,4,7-triazacyclononane (1) has been used to synthesise two new ligands by Schiff-base condensation with methyl sodium acetyl phosphonate to give ligand L and methyl sodium 4-methoxybenzoyl phosphonate to give ligand L1 in the presence of lanthanide ion as templating agent to form the complexes [Ln(L)] and [Ln(L1)](Ln = Y, La, Gd, Yb). Both ligands L and L1 have nine donor atoms comprising three amine and three imine N-donors and three phosphonate O-donors and form Ln(III) complexes in which the three pendant arms of the ligands wrap around the nine-coordinate Ln(III) centres. Complexes with Y(III), La(III), Gd(III) and Yb(III) have been synthesised and the complexes [Y(L)], [Gd(L)] and [Gd(L1)] have been structurally characterised. In all the complexes the coordination polyhedron about the lanthanide centre is slightly distorted tricapped trigonal prismatic with the two triangular faces of the prism formed by the macrocyclic N-donors and the phosphonate O-donors. Interestingly, given the three chiral phosphorus centres present in [Ln(L)] and [Ln(L1)] complexes, the three crystal structures reported show the presence of only one diastereomer of the four possible. 1H, 13C and 31P NMR spectroscopic studies on diamagnetic [Y(L)] and [La(L)] and on paramagnetic [Yb(L)] complexes indicate the presence in solution of all the four different diastereomers in varying proportions. The stability of complexes [Y(L)] and [Y(L1)] in D2O in both neutral and acidic media, and the relaxivity of the Gd(III) complexes, have also been investigated.