Determination of trace calcium by solid substrate-room temperature phosphorimetry

A new method for the determination of trace calcium by solid substrate-room temperature phosphorimetry is established. It is based on the fact that chromeazurols azurol S-phenanthroline-NaCMC (CAS-phen-NaCMC) system can emit strong and stable room temperature phosphorescence (RTF) on the solid substrate in the filter paper. Ca2 and phenanthroline can form complex ion Ca(phen)32 , which will form complex [Ca(phen)3(CAS)2] with CAS. In the result, the number of CAS molecules in each spot increased, causing sharp increase of the RTP signal of the CAS-phen-NaCMC system.     

Catalytic solid substrate-room temperature phosphorimetry for the determination of trace As(V) based on oxidising reaction between hydrogen peroxide and fullerenol using tween-80 as sensitizer

A new catalytic solid substrate-room temperature phosphorimetry (SS-RTP) for the determination of trace arsenic(V) has been established. It is based on the fact that fullerenol (F-ol) emitted strong and stable room temperature phosphorescence (RTP) on nitric acid cellulose membrane (NCM) substrate. H₂O₂ could oxidise F-ol to cause the quenching of RTP. As(V) could catalyse H₂O₂ to oxidise F-ol and decrease the RTP signal of F-ol sharply. After adding tween-80 in the system, its ΔI _p enhanced 7.7 times compared with the without-tween-80 levels. Under the optimum conditions, the linear dynamic range of this method was 0.016?11.2 ag spot^?1 with a detection limit (LD) of 9.3 zg spot^?1 (corresponding concentration: 2.3 × 10^?17 g mL^?1). This sensitive, simple and selective method has been successfully applied to the determination of trace As(V) in human hair and tea samples. The reaction mechanism for SS-RTP is also discussed.     

Determination of trace alpha-fetoprotein variant by affinity adsorption solid substrate-room temperature phosphorimetry and its application to the forecast of human diseases

In the presence of ion perturber LiAc, 4-generation polyamidoamine dendrimers (4G-D) could emit strong and stable room temperature phosphorescence (RTP) signal at on nitrocellulose membrane (NCM), and Triton X-100 could sharply enhance the RTP signal of 4G-D. Triton X-100-4G-D was used to label concanavalin agglutinin (Con A) to get the labeling product Triton X-100-4G-D-Con A. Quantitative specific affinity adsorption (AA) reaction between Triton X-100-4G-D-Con A and α-fetoprotein variant (AFP-V) could be carried out on the surface of NCM, whose product Triton X-100-4G-D-Con A-AFP-V could emit strong and stable RTP and its ΔI_p was proportional to the content of AFP-V. According to the facts above, a new affinity adsorption solid substrate-room temperature phosphorimetry (AA-SS-RTP) for the determination of trace AFP-V by Con A labeled with Triton X-100-4G-D was established. Detection limits of this method were 0.23 fg spot⁻¹ (direct method, corresponding concentration: 5.8 × 10⁻¹³ g mL⁻¹) and 0.13 fg spot⁻¹ (sandwich method, corresponding concentration: 3.2 × 10⁻¹³ g mL⁻¹). It has been successfully applied to determine the content of AFP-V in human serum and forecast human diseases, for its high sensitivity, long RTP lifetime, good repeatability, high accuracy and little background perturbation with at the long wavelength area. Meanwhile, the mechanism for the determination of trace AFP-V using AA-SS-RTP was also discussed.     

Determination of trace arsenic(V) by catalytic solid substrate-room temperature phosphorescence quenching method

In the H2SO4 medium and in the presence of dodecylbenzene sulfonic acid sodiumsalt (DBS), dimethyl yellow (R) could emit strong and stable solid substrate room temperature phosphorescence (RTP) on filter paper. And NaIO4 could oxidize R to cause the RTP quenching. Arsenic(V) could catalyze the reaction of NaIO4 oxidizing R, which caused the RTP sharply quenching. The reducing value of phosphorescence intensity (△Ip) for the system with DBS is 3.3 times higher than that without DBS. Moreover, the△Ip is proportional to the concentration of As(V). Based on the facts above, a new RTP quenching method for the determination of trace As(V) has been established.     

Preparation for nitrocellulose membrane-poly (vinyl alcohol)-ionic imprinting and its application to determine trace copper by room temperature phosphorimetry

Nitrocellulose membrane-poly (vinyl alcohol)-ionic imprinting (NCM-PVA-I-I) was prepared using Cu²⁺ as template. The cavity in NCM-PVA-I-I matched Cu²⁺ very well and the selectivity was high. Cu²⁺ entered the cavity and then could form ionic association ([Cu²⁺]·[(Fin⁻)₂]) with the anion of fluorescein (Fin⁻) outside the cavity by electrostatic effect. [Cu²⁺]·[(Fin⁻)₂] could emit strong and stable room temperature phosphorescence on NCM-PVA-I-I. Its ΔI_p was proportional to the content of Cu²⁺. Based on the above facts, a new method for the determination of trace copper by solid substrate-room temperature phosphorimetry (NCM-PVA-I-I-SS-RTP, SS-RTP is the abbreviation of solid substrate-room temperature phosphorimetry) using NCM-PVA-I-I technique has been established. The linear range of this method was 2.00-144.00 fg Cu²⁺ spot⁻¹ (sample volume: 0.40 μL spot⁻¹, corresponding concentration: 5.00-360.00 pg mL⁻¹), and the detection limit calculated by 3Sb/k was 0.43 fg Cu²⁺ spot⁻¹ (corresponding concentration: 1.1 × 10⁻¹² g mL⁻¹, n = 11). Samples containing 2.00 and 144.00 fg Cu²⁺spot⁻¹ were measured, respectively, for seven times and R.S.D.s were 3.5% and 4.7%. NCM-PVA-I-I-SS-RTP could combine very well the characteristics of both the high sensitivity of SS-RTP and the high match and selectivity of NCM-PVA-I-I, and it was rapid, accurate, sensitive and with good repeatability. It has been successfully applied to determine trace copper in human hair and tea samples.     

Determination of glucose by affinity adsorption solid substrate-room temperature phosphorimetry based on concanavalin agglutinin labeled with fluorescein using 1.5-generation dendrimers as sensitizer

In the presence of the heavy atom perturber Pb(Ac)₂, fluorescein (HFin) can emit strong and stable room temperature phosphorescence (RTP) on the surface of a nitrocellulose membrane (NCM) at λ_ex ^max/λ_em ^max = 480/648 nm. It can be spiked with the 1.5-generation polyamidoamine dendrimers (abbreviated: D-1.5) to emit stronger RTP. It was found that a quantitative specific affinity adsorption (AA) reaction between concanavalin agglutinin (abbreviated: Con A) labeled with D-1.5-HFin and N-acetylglucosamine (G) could be carried out on the surface of NCM. The product of the reaction (D-1.5-HFin- Con A-G) could emit strong and stable RTP, and the ΔI_p was proportional to the content of G. According to the above facts, a new method for determination of G by affinity adsorption solid substrate-room temperature phosphorimetry (AA-SS-RTP) was established, based on Con A labeled with fluorescein using D-1.5 dendrimers molecules as sensitizer. The linear range of the sandwich method was 0.040–60 pg G spot⁻¹ (corresponding concentration range: 0.10–150 ng mL⁻¹; sample volume: 0.40 μL spot⁻¹). The regression equation of the working curve was ΔI_p = 6.880 + 5.610 m_G pg spot⁻¹, r = 0.9987. The working solutions containing 0.10 and 150 ng mL⁻¹ G were determined repeatedly 11 times, respectively. The corresponding RSDs were 2.9 and 3.8%. The detection limit of this method calculated by 3Sb/k was 0.021 pg spot⁻¹ (5.2 × 10⁻¹¹ g mL⁻¹). Compared with the direct method (detection limit: 0.078 pg spot⁻¹, linear range: 0.40–40 pg G spot⁻¹), the sensitivity was obviously improved and the linear range was wider. This method has been successfully applied to the determination of G in human plasma, as well as to the supervision and forecast of human diseases, for it is of good sensitivity, accuracy and precision. Correspondence: Jia-Ming Liu, Department of Chemistry and Environmental Science, Zhangzhou Normal College, Zhangzhou 363000, P.R. China     

Solid substrate-room temperature phosphorimetry for the determination of trace protein using ion association complex [Cu(BPY)2]·[(Fin)2] as a phosphorescent probe

Fluorescein (HFin) emitted strong and stable room temperature phosphorescence (RTP) on filter paper after set at 50 °C for 10 min using Li⁺ as the ion perturber. HFin existed as Fin⁻ when the pH value was in the range of 5.45–7.36. Fin⁻ could react with [Cu(BPY)₂]²⁺ (BPY: α,α-bipyridyl) to produce ion association complex [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻, which could enhance the RTP signal of Hfin. In the presence of bovine serum albumin (BSA), the –COOH group of Fin⁻ in the [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻ could react with the –NH₂ group of BSA to form the ion association complex [Cu(BPY)₂]²⁺·[(Fin-BSA)₂]²⁻, which contained –CO–NH– bond. This complex could sharply enhance the RTP signal of Hfin and the ΔI_p was directly proportional to the content of BSA. According to the facts above, a new solid substrate-room temperature phosphorimetry (SS-RTP) for the determination of trace protein had been established using the ion association complex [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻as a phosphorescent probe. This method had wide linear range (0.40 × 10⁻⁹–280 × 10⁻⁹ mg l⁻¹), high sensitivity (the detection limit (LD) was 1.4 × 10⁻¹⁰ mg l⁻¹), good precision (RSD: 3.4–4.9%) and high selectivity (the allowed concentration of coexistent ions or coexistent materials was high). It had been applied to the determination of the content of protein in 10 kinds of real samples, and the result agreed well with pyrocatechol violet-Mo (VI) method (P.V.M.M.), which indicated it had high accuracy. Meanwhile, reaction mechanism for the determination of trace protein with [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻ phosphorescent probe was also discussed. The academic thought of this research could not only be used to develop many kinds of ion association complex phosphorescent probes, but also provided a new way to promote the sensitivity of SS-RTP.     

Determination of trace mercury by solid substrate room temperature phosphorescence quenching method based on lead carboxymethyl cellulose (Pb(CMC)(2)) particles containing luminescent salicyl fluorones molecules

Luminescent particles of lead carboxymethyl cellulose (Pb(CMC)₂), which contains salicyl fluorones (THBF), Pb(CMC)₂-THBF, were synthesized by sol-gel method. Pb(CMC)₂-THBF can emit intense and stable solid substrate room temperature phosphorescence (SS-RTP) on filter paper. EDTA can chelate the Pb²⁺ in Pb(CMC)₂-THBF, causing it decompose into aqueous soluble components PbY²⁻, CMC⁻ and THBF, and these components can react with Hg²⁺ to form (CMC)₂Hg-THBF, causing decrease of phosphorescence intensity. Based on the facts above, a new method for the determination of trace mercury by SS-RTP quenching method was established. The linear range of this method is 2.0-40.0 fg spot⁻¹ (5.0-100.0 pg ml⁻¹) of Hg²⁺, with a detection limit (LD) of 0.26 fg spot⁻¹, and the regression equation of working curve is (fg spot⁻¹, 0.4 μl spot⁻¹), r = 0.9994. This method has been applied to the determination of trace mercury in water sample with satisfactory results. The mechanism of SS-RTP emission is also discussed.     

Identification of firearms handling by the [Fe(PDT)(3)](2+) complex: Chemical and time-dependent factors

Handling of a gun results in the formation of invisible impressions, caused by transfer of iron traces to the skin surface. Visualization of these impressions is possible by spraying the palms with a solution of 3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine (PDT), which forms a magenta complex with iron(II) residues. Hence, mark intensity is directly related to the amounts of iron transferred to the palm. Palmar sweat plays a major role in iron transfer from the firearm to the hand. More factors, however, are involved in this process. Three time-dependent factors have been studied with relation to their effect on the developed mark: the gripping duration of the weapon; the time elapsed from the contact; and the rate of iron dissolution in aqueous solutions containing sweat components in physiological concentrations.We found that the amounts of iron transferred to the palm depend on both, the gripping period and the levels of palmar moisture. Thus, only a few seconds of gripping were required for developing good marks (corresponding to 80 ng cm⁻² of iron) on highly-moistured hands, much longer gripping periods were necessary for developing marks of similar intensity on relatively dry hands. Experiments that aimed at studying the effect of sweat components on metallic iron dissolution were carried out in aqueous solutions. It was found that chloride ions in physiological concentrations remarkably enhanced the dissolution, while l-serine, the major amino acid in palmar sweat, had a detrimental effect on this process. Urea, another sweat component, had only a minor effect on the dissolution rate.     

Determination of trace selenium by solid substrate-room temperature phosphorescence enhancing method based on potassium chlorate oxidizing phenyl hydrazine-1,2-dihydroxynaphthalene-3,6-disulfonic acid system

A new method for the determination of trace selenium based on solid substrate-room temperature phosphorimetry (SS-RTP) has been established. This method was based on the fact that in HCl-KCl buffer solution, potassium chlorate could oxidize phenyl hydrazine to form chloridize diazo-ion after being heated at 100 degrees C for 20 min, and then the diazo-ion reacted with 1,2-dihydroxynaphthalene-3,6-disulfonic acid to form red azo-compound which could emit strong room temperature phosphorescence (RTP) signal on filter paper. Selenium could catalyze potassium chlorate oxidizing the reaction between phenyl hydrazine and 1,2-dihydroxynaphthalene-3,6-disulfonic acid, which caused the sharp enhancement of SS-RTP. Under the optimum condition, the relationship between the phosphorescence emission intensity (DeltaIp) and the content of selenium obeyed Beer's law when the concentration of selenium is within the range of 1.60-320 fg spot-1 (or 0.0040-0.80 ng ml-1 with a sample volume of 0.4 microl). The regression equation of working curve can be expressed as DeltaIp=13.12+0.4839CSe(IV) (fg spot-1) (n=6), with correlation coefficient r=0.9991 and a detection limit of 0.28 fg spot-1 (corresponding to a concentration range of 7.0x10(-13) g ml-1 Se(IV), n=11). After 11-fold measurement, R.S.D. were 2.8 and 3.5% for the samples containing 0.0040 and 0.80 ng ml-1 of Se(IV), respectively. This accurate and sensitive method with good repeatability has been successfully applied to the determination of trace selenium in Chinese wolfberry and egg yolk with satisfactory results. The mechanism of the enhancement of phosphorescence was also discussed.     

A highly sensitive coupling technique for the determination of trace quercetin based on solid substrate room temperature phosphorimetry and poly (vinyl alcohol) complex imprinting

Al³⁺ could react with quercetin (Q) to form [AlQ]³⁺ complex which could be used as a template for the preparation of poly (vinyl alcohol)–[AlQ]³⁺ complex imprinting (PVA-C-I). The [AlQ]³⁺ not only had good matching ability and selectivity with the cavity of PVA-C-I, but also could react with the fluorescein isothiocyanate anion (FITC⁻) on the outside of cavity by electrostatic interaction to form ion-association complex [AlQ]³⁺·[(FITC)⁻]₃. The ion-association complex could emit strong and stable room temperature phosphorescence (RTP) on polyamide membrane (PAM) and the ΔI_p of the system had linear relationship with the content of Q, showing the highly selective identification of PVA-C-I to Q. Thus, a new coupling technique for the determination of trace Q based on solid substrate room temperature phosphorimetry and poly (vinyl alcohol) complex imprinting (PVA-C-I-SSRTP) was established. The linear range and limit of detection (LOD) of this method were 0.010–2.0 (×10⁻¹² g mL⁻¹) and 2.0 × 10⁻¹⁴ g mL⁻¹, respectively, showing wide linear range and high sensitivity of PVA-C-I-SSRTP. This method was used to determine the content of Q in waste water, and the results are consistent with those by spectrofluorimetry. Meanwhile, the mechanism for the determination of Q using PVA-C-I-SSRTP was also discussed.     

The water-exchange mechanism of the [UO(2)(OH(2))(5)](2+) ion revisited: the importance of a proper treatment of electron correlation

The water-exchange mechanism of [UO(2)(OH(2))(5)](2+) has been reinvestigated by using ab initio molecular orbital (MO) methods. The geometries and the vibrational frequencies were computed with CAS-SCF(12/11)-SCRF and CAS-SCF(12/11)-PCM methods, which take into account static electron correlation (using the complete active space self-consistent field (CAS-SCF) technique, based on an active space of 12 electrons in 11 orbitals) and hydration (using the self-consistent reaction field (SCRF) and polarizable continuum model (PCM) techniques). The total energies were computed with multiconfiguration quasi-degenerate second-order perturbation theory, the MCQDPT2(12/11)-PCM method, which treats static and dynamic electron correlation as well as hydration. The adequacies of other currently used quantum chemical methods, MP2, CCSD(T), B3 LYP, and BLYP, are discussed. For the associative and dissociative pathways, thermodynamic activation parameters (DeltaH( not equal), DeltaS( not equal), and DeltaG( not equal)) were computed. For the associative mechanism, the calculated DeltaH( not equal) and DeltaG( not equal) values agree with experiment, whereas for the dissociative mechanism, they are higher by approximately 20 kJ mol(-1). The dissociative mechanism is preferred for substitution reactions of uranyl(VI) complexes with ligands that are stronger electron donors than water. The question of whether a concerted (I(a) or I(d)) or a stepwise (A or D) mechanism operates is discussed on the basis of the computed lifetime of the respective intermediate, and the duration of the vibration with which the intermediate is transformed into the product.     

Spectroscopic,thermal and structural studies of a new mercury(II) one-dimensional coordination polymer, [Hg(3-bpo)2(SCN)2], 3-bpo = 2,5- bis (3-pyridyl)-1,3,4-oxadiazole

A new mercury(II)-organic polymeric complex generated from 2,5-bis(3-pyridyl)-1,3,4-oxadiazole (3-bpo) as an angular dipyridyl derivative ligand, [Hg(3-bpo)₂(SCN)₂], was prepared from reactions of ligand 3-bpo with mercury(II) thiocyanate. The compound was characterized by elemental analysis, IR-, ¹H NMR-, ¹³C NMR-spectroscopy and structurally determined by X-ray single crystal diffraction. The thermal stability of [Hg(3-bpo)₂(SCN)₂] was studied by thermal gravimetric (TG) and differential thermal analyses (DTA).     

Flow-injection chemiluminescence determination of chlortetracycline using on-line electrogenerated [Cu(HIO(6))(2)](5-) as the oxidant

A novel chemiluminescence (CL) flow system for the determination of chlortetracycline is described. It is based on the direct CL reaction of chlortetracycline and [Cu(HIO₆)₂]⁵⁻ in KOH medium. The unstable [Cu(HIO₆)₂]⁵⁻ was on-line electrogenerated by constant-current electrolysis. The CL intensity was linear with chlortetracycline concentration in the range of 0.1–100 μg ml⁻¹. The determination limit was 5.3×10⁻⁸ g ml⁻¹. The whole process could be completed in 1 min. The proposed method is suitable for automatic and continuous analysis, and has been applied satisfactorily to analysis of chlortetracycline in biological fluid.     

A novel chemically modified carbon paste electrode based on a new mercury(II) complex for selective potentiometric determination of bromide ion

A new modified carbon paste electrode based on a recently synthesized mercury (II) complex of a pyridine containing proton transfer compound as a suitable carrier for Br⁻ ion is described. The electrode has a linear dynamic range between 3.00×10⁻² and 1.0×10⁻⁵ M with a near-Nernastian slope of 61.0±0.9 mV per decade and a detection limit of 4.0×10⁻⁶ M (0.32 ppm). The potentiometric response is independent of the pH of the solution in the pH range 4.0–8.3. The electrode possesses the advantages of low resistance, fast response and good over a variety of other anions. It was applied as an indicator electrode in potentiometric titration of bromide ions and for the recovery of Br⁻ from tap water.     

流动注射-[Cu(HIO6)2]5-配离子化学发光法测定兽药制剂中恩诺沙星

基于恩诺沙星对 [Cu(HIO6)2]5- 配离子-H3PO4 体系化学发光信号的增敏作用,提出了流动注射-化学发光测定恩诺沙星的新方法.考察了[Cu(HIO6)2]5- 配离子的光谱特性,优化了影响化学发光强度的条件.恩诺沙星质量浓度在4.0×10-8～1.0×10-5g/mL 范围内,化学发光强度与恩诺沙星的浓度之间呈现良好的线性关系.检出限为1.54×10-8g/mL,RSD为1.2%.方法已用于兽药制荆中恩诺沙星的测定,回收率为 90.0%～112%.     

Determination of trace silver by solid substrate room temperature phosphorescence quenching method based on lead carboxymethyl cellulose particles (Pb(CMC)2) containing luminescent salicyl fluorenes molecules

Luminescent particles of lead carboxymethyl cellulose (Pb(CMC)2) containing salicyl fluorones (THBF), Pb(CMC)2-THBF were synthesized by the sol-gel method, using sodium carboxymethyl cellulose (NaCMC) as precursor and Pb2+ as precipitant. Pb(CMC)2-THBF can emit the intense and stable solid substrate room temperature phosphorescence (SS-RTP) on filter paper. And EDTA can chelate Pb2+ in Pb(CMC)2-THBF, causing it to decompose into aqueous soluble components PbY2-, CMC- and THBF, which can react with Ag+ to form Ag(CMC)2-THBF, causing the decrease of phosphorescence intensity. Based on the facts above, a new method for the determination of trace silver by SS-RTP quenching method was established. The linear range of this method is 8.0-40.0 fg spot(-1) (20.0-100.0 pg ml(-1)), with a detection limit (LD) of 2.2 fg spot(-1) (corresponding to a concentration range of 5.5 x 10(-13) g ml(-1)), and the regression equation of working curve is DeltaI(p) = 12.56 + 0.5527C(Ag+) (fg spot(-1), 0.4 microl spot(-1)), n = 8, r = 0.9992. This method has been applied to the determination of trace silver in human hair and tea sample with satisfactory results. The mechanism of SS-RTP emission is also discussed.     

Synthesis and spectral characterization of mercury(II) complexes with the bidentate Schiff base ligand N,N′-bis(2,3-dimethoxybenzylidene)-1,2-diaminoethane: The crystal structures of [Hg((23-MeO-ba)2en)I2] and [Hg((23-MeO-ba)2en)Br2]

Three mercury(II) complexes, [Hg((23-MeO-ba)₂en)X₂] (X = I (1), Br (2) and Cl(3)), and the ligand (23-MeO-ba)₂en ((23-MeO-ba)₂en = N,N′-bis(2,3-dimethoxybenzylidene)-1,2-diaminoethane) have been synthesized and characterized by elemental analyses, FT-IR and ¹H NMR spectroscopy. The crystal and molecular structures of 1 and 2 were determined by X-ray crystallography from single-crystal data. The metal-to-ligand ratio was found to be 1:1. The mercury(II) center in 1 and 2 has a distorted tetrahedral geometry with HgN₂I₂ and HgN₂Br₂ chromophores, respectively. The Schiff base ligand (23-MeO-ba)₂en acts as a chelating ligand, coordinating via the two nitrogen atoms to the mercury(II) center, and it adopts an E,E conformation. The coordination sphere of the mercury(II) center in 1 and 2 is completed by the two I and Br atoms, respectively. In complex 1 an inter-molecular non-classical hydrogen bond of the type C-H?O was found, while in complex 2 inter- and intra-molecular non-classical hydrogen bonds of the type C-H?X (X = O and Br) were found. The ¹H NMR spectra of the complexes exhibit downfield as well as upfield shifts of the free ligand resonances, reflecting changes in the ligand’s geometry during its coordination.     

Electropolymerized surface ion imprinting films on a gold nanoparticles/single-wall carbon nanotube nanohybrids modified glassy carbon electrode for electrochemical detection of trace mercury(II) in water

Electrochemical detection of Hg(II) using a electropolymerized ion imprinting poly(2-mercaptobenzothiazole) films at the surface of gold nanoparticles/single-walled carbon nanotube nanohybrids modified glassy carbon electrode (PMBT/AuNPs/SWCNTs/GCE) is described for the first time. The Hg(II)-imprinted PMBT/AuNPs/SWCNTs/GCE sensor exhibits larger binding to functionalized capacity, larger affinity, faster binding kinetics and higher selectivity to template Hg(II). The differential pulse anodic stripping voltammetry (DPASV) response of the Hg(II)-imprinted PMBT/AuNPs/SWCNTs/GCE sensor to Hg(II) is ca. 3.7- and 10.5-fold higher than that at the non-imprinted PMBT/AuNPs/SWCNTs/GCE and the imprinted PMBT/AuNPs/GCE, respectively, and the detection limit for Hg(II) is 0.08 nM (S/N = 3, which is well below the guideline value given by the World Health Organization) and a sensitivity of 0.749 μA nM⁻¹ was obtained. Excellent wide linear range (0.4–96.0 nM) and good repeatability (relative standard deviation of 2.6%) were obtained for Hg(II). The interference experiments show that Ag(I), Pb(II), Cd(II), Zn(II) and Cu(II) had little or no influence on the Hg(II) signal. These values, particularly the high sensitivity and excellent selectivity in contrast to the values reported previously in the area of electrochemical Hg(II) detection, demonstrate the analytical performance of the Hg(II)-imprinted PMBT/AuNPs/SWCNTs/GCE toward Hg(II) is superior to the existing electrodes and could be used for efficient determination of Hg(II) in natural water samples.     

Site-differentiated hexanuclear rhenium(III) cyanide clusters [Re(6)Se(8)(PEt(3))(n)()(CN)(6)(-)(n)()](n)()(-)(4) (n = 4, 5) and kinetics of solvate ligand exchange on the cubic [Re(6)Se(8)](2+) Core

The site-differentiated, cyanide-substituted hexanuclear rhenium(III) selenide clusters cis- and trans-[Re(6)Se(8)(PEt(3))(4)(CN)(2)] and [Re(6)Se(8)(PEt(3))(5)(CN)](+) have been prepared from heterogeneous reactions of the corresponding iodo clusters with AgCN in refluxing chloroform. Isolated yields are 68%, 46%, and 64% for cis-[Re(6)Se(8)(PEt(3))(4)(CN)(2)], trans-[Re(6)Se(8)(PEt(3))(4)(CN)(2)], and [Re(6)Se(8)(PEt(3))(5)(CN)](+), respectively. The new compounds are air- and water-stable and are characterized by X-ray diffraction crystallography, (31)P NMR and IR spectroscopies, and FAB mass spectrometry. In related work, the solvent exchange rates of two site-differentiated monosolvate clusters, [Re(6)Se(8)(PEt(3))(5)(MeCN)](SbF(6))(2) and [Re(6)Se(8)(PEt(3))(5)(Me(2)SO)](SbF(6))(2), in neat solvents were measured by (1)H NMR. These clusters are substitutionally inert; k approximately 10(-)(5)-10(-)(6) s(-)(1) at 318 K. Activation parameters indicate a dissociative ligand exchange mechanism; DeltaH() values obtained from least-squares fitting of temperature-dependent kinetics data exceed RT by a factor of ca. 50 over the temperature range studied. These results demonstrate that the substitutional lability encountered in a previous study of cluster photophysics (Gray, T. G.; Rudzinski, C. M.; Nocera, D. G.; Holm, R. H. Inorg. Chem. 1999, 38, 5932) cannot result from ground-state thermal reactions.