Application of Pac Ester in Thioester Method for the Synthesis of Cyclopentapeptides

Thioester method for the synthesis of cyclopeptides is improved by using Pac (Pac = phenacyl, CH2COC6Hs) ester as a protecting group of 3-mercaptopropionic acid. The Pac group is easy to be removed from C-terminal with zinc in acetic acid. The protected glycine thioester and peptide thioesters synthesized by the improved method, are easy to be purified, so the final linear peptides are pure enough for the following cyclization. Furthermore, this method is flexible for peptide chain elongation,either from C-termlnal or from N.terminal. So it is an efficient and practical method for synthesis of bioactive peptides. Two N-protected pentapeptide thioesters, Boc-Pro-Tyr-Leu-Ala-GIySCH2CH2COOPac and Boc-Ala-Tyr-Leu-Ala-Gly-SCH2CH2COOPac were synthesized by the improved thloester method.After deprotecting Pac ester with zinc in aqueous acetic acid and Boc group with trifluoroacetic acid in CH2C12, two free pentapeptide tldoesters were obtained. Ag^ -assisted cyclization in acetate buffered solution afforded two cyclic pentapeptides c(Pro-Tyr-Leu-Ala-Gly) and c(Ala-Tyr-Leu-Ala-Gly).Effects of different buffer pH, different Ag^ concentrations, etc. on the cyclization were studied.     

Synthesis of the sphingolipid activator protein, saposin C, using an azido-protected O-acyl isopeptide as an aggregation-disrupting element

In order to achieve an efficient synthesis of highly hydrophobic proteins by the native chemical ligation (NCL) reaction, we examined to incorporate the O-acyl isopeptide method, which is known to improve the solubility of the segment, to the NCL reaction: a peptide thioester having O-acyl isopeptide structures is prepared by the Boc mode solid-phase method using an azido group as a protecting group for the isopeptide site, and then ligated with C-terminal segment with an in situ reduction of the azido group followed by an O- to N-acyl shift. This method was successfully applied to the synthesis of the sphingolipid activator protein, saposin C.     

Peptide dithiodiethanol esters for in situ generation of thioesters for use in native ligation

A new approach is described for the general Fmoc-based solid-phase synthesis of C-terminal peptide (thio)esters. One hydroxy group of 2,2-dithiodiethanol (used in large excess) was anchored on trityl resin, and the remaining hydroxy group was loaded with the first amino acid. Standard chain elongation and TFA-based peptide release yielded peptide C-terminal dithiodiethanol esters in good purities. Under standard conditions of native chemical ligation (excess thiol, neutral pH), the dithiodiethanol function is presumably reduced and rearranged (or equilibrated) to the thioester via a 5-membered intermediate. The resulting thioesters are shown to undergo native chemical ligation with N-terminal cysteine peptides. Notably, hydrolysis of the reduced ester is a major competing reaction, especially in the presence of 6 M guanidinium chloride, which is often required for solubilization of large peptide fragments.     

Synthesis of peptide alkylthioesters using the intramolecular N,S-acyl shift properties of bis(2-sulfanylethyl)amido peptides

The design of novel methods giving access to peptide alkylthioesters, the key building blocks for protein synthesis using Native Chemical Ligation, is an important area of research. Bis(2-sulfanylethyl)amido peptides (SEA peptides) 1 equilibrate in aqueous solution with S-2-(2-mercaptoethylamino)ethyl thioester peptides 2 through an N,S-acyl shift mechanism. HPLC was used to study the rate of equilibration for different C-terminal amino acids and the position of equilibrium as a function of pH. We show also that thioester form 2 can participate efficiently in a thiol-thioester exchange reaction with 5% aqueous 3-mercaptopropionic acid. The highest reaction rate was obtained at pH 4. These experimental conditions are significantly less acidic than those reported in the past for related systems. The method was validated with the synthesis of a 24-mer peptide thioester. Consequently, SEA peptides 1 constitute a powerful platform for access to native chemical ligation methodologies.     

Fmoc solid-phase synthesis of peptide thioesters by masking as trithioortho esters

[reaction: see text] Total chemical synthesis of proteins by chemoselective ligation relies on C-terminal peptide thioesters as building blocks. Their preparation by standard Fmoc solid-phase peptide synthesis is made difficult by the lability of thioesters to aminolysis by the secondary amines used for removal of the Fmoc group. Here we present a novel backbone amide linker (BAL) strategy for their synthesis in which the thioester functionality is masked as a trithioortho ester throughout the synthesis.     

Chemical synthesis of human adiponectin(19–107) bearing post-translational glycosylation

Human adiponectin(19–107), which consists of the variable region and the collagenous domain bearing post-translational modifications including glycosylation, was chemically synthesized for the first time. A glycoside of 5-hydroxylysine (Hyl) was incorporated using an α-d-glucopyranosyl-(1→2)-β-d-galactopyranosyl/Hyl-Gly building block in a benzyl-protected form by solid-phase peptide synthesis (SPPS). The molecule was assembled from four segments prepared by SPPS via native chemical ligation (NCL) and thioester methods.     

半胱氨酸肽片段连接法合成ω-芋螺毒素MVIIA

ω-芋螺毒素MVIIA是已上市的镇痛药Ziconotide的有效成分.采用标准Fmoc保护策略在聚苯乙烯树脂上合成ω-MVIIA比较困难,是固相合成中的"困难肽".本研究将ω-MVIIA分为N-端15肽硫酯和C-端10肽两个片段采用标准Fmoc保护策略分别合成,再通过半胱氨酸肽片段连接得到全长的ω-芋螺毒素MVIIA肽链.该方法提高了合成ω-芋螺毒素MVIIA产率.该研究为"困难肽"的合成提供了较好的参考方法.     

An efficient peptide ligation using azido-protected peptides via the thioester method

Azido-protected Fmoc-Lys-OH (Fmoc-Lys(N₃)-OH) was synthesized from Fmoc-Lys-OH by the copper(II)-catalyzed diazo transfer method, and introduced to a peptide by the ordinary Fmoc-based solid-phase peptide synthesis. This azido peptide could be condensed with a peptide thioester by the Ag⁺-free thioester method without any significant side reactions. The azido group was easily reduced to an amino group by Zn powder after peptide condensation.     

Sequential peptide chemical ligation by the thioester method and extended chemical ligation

The sequential chemical ligation of peptide thioesters by a combination of the thioester method and extended chemical ligation using a photoremovable auxiliary, 2-mercapto-1-(2-nitrophenyl)ethyl group, is described. The thiazolidine ring was used as a protecting group for the N-terminal 1,2-aminoethanethiol moiety of the auxiliary in the middle peptide thioester. After the first thioester coupling, the thiazolidine ring was opened by treatment with O-methylhydroxylamine. Second coupling by extended chemical ligation followed by UV irradiation gave the target polypeptide.     

多肽片段连接方法及肽硫酯和肽醛的合成*

本文综述了多肽和蛋白质合成中的片段连接方法,这是近年来多肽和蛋白质合成领域中方法学上的重要进展.该方法使用非保护的多肽片段,无需酶或化学活化试剂,在缓冲溶液中能够高产率地获得多肽和蛋白质.还介绍了与多肽片段连接有关的肽硫酯和肽醛的合成方法.     

The use of a cysteinyl prolyl ester (CPE) autoactivating unit in peptide ligation reactions

A peptide containing a cysteinyl prolyl ester (CPE) moiety at the C-terminus (CPE peptide) is spontaneously transformed into a diketopiperazine thioester via an intramolecular N-S acyl shift reaction, followed by diketopiperazine formation. The CPE peptide can be ligated with a Cys-peptide in a one-pot procedure. The peptide diketopiperazine thioester can also be transformed into a peptide thioester by intermolecular thiol-thioester exchange with external thiol compounds such as sodium mercaptoethanesulfonate. Since CPE peptides can be prepared by standard Fmoc solid-phase synthesis, it is a versatile alternative to the peptide thioester, providing a flexible ligation strategy that promises to be useful in polypeptide synthesis.     

An N-protection free ligation of the peptide thioester and the peptide with an N-alkoxy- or N-aryloxyamino group at its N-terminus

Peptides with an N-alkoxy or N-aryloxy amino acid at their N-terminus were synthesized and successfully ligated with a peptide thioester by silver ion activation under a slightly acidic condition without requiring protection of the side chain amino groups. The N-methoxy group was easily cleaved by the SmI₂ reduction in CH₃OH aq. to obtain the desired peptide with a native peptide bond. This method was successfully applied to the synthesis of the human atrial natriuretic peptide showing the efficiency of the novel ligation.     

Facile solid-phase synthesis of sulfated tyrosine-containing peptides: Part II. Total synthesis of human big gastrin-II and its C-terminal glycine-extended peptide (G34-Gly sulfate) by the solid-phase segment condensation approach

Application of the fluoren-9-ylmethoxycarbonyl (Fmoc)-based solid-phase segment condensation approach to the preparation of sulfated peptides was investigated through the synthesis of human big gastrin-II, a 34-residue sulfated tyrosine [Tyr(SO3H)]-containing peptide. Highly acid-sensitive 2-chlorotrityl resin (Clt resin) was exclusively employed as an anchor-resin for the preparation of the three peptide segments having the C-terminal Pro residue as well as of the Tyr(SO3H)-containing resin-bound segment. By using the PyBOP-mediated coupling protocol [PyBOP=benzotriazolyloxytris(pyrrolidino)phosphonium hexafluorophosphatel, we successively condensed each segment and constructed the 34-residue peptide-resin without any difficulty. The final acid treatment of the fully protected peptide-resin at low temperature (90% aqueous TFA, 0 degree C for 8 h), which can detach a Tyr(SO3H)-containing peptide from the resin and remove the protecting groups concurrently with minimum deterioration of the sulfate, afforded a crude sulfated peptide. After one-step HPLC purification, a highly homogeneous human big gastrin-II was easily obtained in 14% yield from the protected peptide-resin. The sulfate form of the C-terminal glycine-extended gastrin (G34-Gly sulfate), a posttranslational processing intermediate of gastrin-II, was also successfully prepared with the segment condensation approach (11% yield). These results demonstrated the usefulness of the segment condensation protocol for preparing large Tyr(SO3H)-containing peptides.     

Ca-mediated thiolysis of peptide–resin linkage as an option for preparing protected peptide thioesters

A mild new procedure for preparing protected peptide thioesters, based on Ca²⁺-assisted thiolysis of peptide–Kaiser oxime resin (KOR) linkage, is described. Ac-Ile-Ser(Bzl)-Asp(OcHx)-SR (Ac: acetyl; Bzl: benzyl; cHx: cyclohexyl), model peptide, was readily released from the resin by incubating the peptide–KOR at 60 °C in mixtures of DMF with n-butanethiol [R = (CH₂)₃CH₃] or ethyl 3-mercaptopropionate [R = (CH₂)₂COOCH₂CH₃] containing Ca(CH₃COO)₂. After serine and aspartic acid side-chain deprotection under acid conditions, Ac-Ile-Ser-Asp-S(CH₂)₂COOCH₂CH₃ was successfully obtained with good quality and high yield. This type of C-terminal modified peptide may act as an excellent acyl donor in peptide segment condensation by the thioester method, native chemical ligation and enzymatic methods.     

Enhancement in the rate of conversion of peptide Cys-Pro esters to peptide thioesters by structural modification

We previously reported that the peptide containing a Cys-Pro ester (CPE) moiety is spontaneously transformed into a peptide thioester via an N to S acyl shift followed by diketopiperazine formation. In an attempt to identify more reactive structures for the formation of a peptide thioester, we modified the CPE structure, in which the Pro residue in the CPE moiety was replaced with N-substituted glycine derivatives. These peptides were transformed into a peptide thioester more rapidly. Alternatively, the addition of an amino acid residue at the C-terminus of the CPE moiety also accelerated thioester formation.     

Protein thioester synthesis enabled by sortase

Proteins containing a C-terminal thioester are important intermediates in semisynthesis. Currently there is one main method for the synthesis of protein thioesters that relies upon the use of engineered inteins. Here we report a simple strategy, utilizing sortase A, for routine preparation of recombinant proteins containing a C-terminal (α)thioester. We used our method to prepare two different anthrax toxin cargo proteins: one containing an (α)thioester and another containing a D-polypeptide segment situated between two protein domains. We show that both variants can translocate through protective antigen pore. This new method to synthesize a protein thioester allows for interfacing of sortase-mediated ligation and native chemical ligation.     

N-Alkyl cysteine-assisted thioesterification of peptides

A new method for the preparation of peptide thioester by the post-solid phase peptide synthesis (SPPS) approach was developed. A series of N-alkyl cysteine derivatives were prepared and used as the C-terminus residue of the peptides prepared by the Fmoc SPPS. The synthetic peptides released from resin by TFA were readily converted to the peptide thioester in aqueous 3-mercaptopropionic acid (MPA) without significant side reactions.     

Theoretical Analysis of the Detailed Mechanism of Native Chemical Ligation Reactions

The method of native chemical ligation between an unprotected peptide α‐thioester and an N‐terminal cysteine–peptide to give a native peptide in aqueous solution is one of the most effective peptide ligation methods. In this work, a systematic theoretical study was carried out to fully understand the detailed mechanism of ligation. It was found that for the conventional native chemical ligation reaction between a peptide thioalkyl ester and a cysteine in combination with an added aryl thiol as catalyst, both the thiol‐thioester exchange step and the transthioesterification step proceed by an anionic concerted S_N2 displacement mechanism, whereas the intramolecular rearrangement proceeds by an addition–elimination mechanism, and the rate‐limiting step is the thiol‐thioester exchange step. The theoretical method was then extended to study the detailed mechanism of the auxiliary‐mediated peptide ligation between a peptide thiophenyl ester and an N‐2‐mercaptobenzyl peptide in which both the thiol‐thioester exchange step and intramolecular acyl‐transfer step proceed by a concerted S_N2‐type displacement mechanism. The energy barrier of the thiol‐thioester exchange step depends on the side‐chain steric hindrance of the C‐terminal amino acid, whereas that of the acyl‐transfer step depends on the side‐chain steric hindrance of the N‐terminal amino acid.     

Facile peptide thioester synthesis via solution-phase tosylamide preparation

Preparation of peptide thioester is essential for native chemical ligation and block condensation. Our novel methodology involves conversion of the carboxylic acid of a peptide into a thioester using p-toluenesulfonyl isocyanate, followed by alkylation, then thiol substitution. Our methodology can also be used for the preparation of glycopeptide thioesters. Furthermore, it is possible to carry out the reaction as a sequential peptide chemical ligation.     

Efficient microwave-assisted tandem N- to S-acyl transfer and thioester exchange for the preparation of a glycosylated peptide thioester

A peptide carrying a mercaptomethylated proline derivative at the C-terminus was prepared by solid-phase peptide synthesis (SPPS) and converted to the thioester of 3-mercaptopropionic acid (MPA) by aqueous MPA under microwave irradiation conditions. This post-SPPS thioesterification reaction was successfully applied to the synthesis of a glycopeptide thioester composed of 25 amino acid (AA) residues, which was then used for the preparation of a 61-AA glycopeptide by the thioester condensation method.