1H and 31P NMR spectra of substituted methylphosphonic acids with indirect determination of 31P shifts

Proton and phosphorus magnetic resonance spectra of substituted methylphosphonic acids have been determined as a function of pH. A method has been developed for measuring the ³¹P shift indirectly by optimal heteronuclear decoupling of the ¹H spectra of samples and standards. Control experiments have demonstrated the broad applicability of this technique to the characterization of low milligram samples of N-phosphonomethylglycine and potential metabolites.     

1H AND 31P NMR Spectroscopy of Agrocinopine

The ¹H NMR data of agrocinopine in D₂O solution as extracted from standard 2D NMR experiments, along with 1D ³¹P and ¹³C NMR experiments allow to support the trisaccharide structure originally proposed on basis of comparative ¹³C NMR measurements.     

Synthesis of aurocyanide and auricyanide complexes of phosphines,phosphine sulfides and phosphine selenides,and their characterization by IR,far-IR,UV solution,and solid-state NMR spectroscopic methods

A series of aurocyanide and auricyanide complexes of phosphines, phosphine sulfides, and phosphine selenides were synthesized. These new complexes have the general formula [L _n Au(CN) _m ], where L could be Cy₃P, (2-CN-Et)₃P, Me₃PS, Et₃PS, Ph₃PS, Me₃PSe, or Ph₃PSe. Auricyanide was reacted with L at 1?:?2 ratio. Products were characterized using elemental analysis, melting point, UV, IR, far-IR solution, and solid-state NMR spectroscopy. Phosphine ligands cause gold(III) reduction to gold(I); less redox tendency was found for phosphine sulfides and phosphine selenides. Tri-coordinate complexes [L₂AuCN] were produced from phosphine ligands with gold-tetracyanide. IR and UV spectroscopic methods were used to identify gold oxidation state in the synthesized complexes.     

Fluorine-induced chemiluminescence detection of phosphine,alkyl phosphines and monophosphinate esters

Summary Phosphine, alkylated phosphines and monophosphinate esters are detected with high sensitivity in capillary gas chromatography (GC) by their chemiluminescent reactions with molecular fluorine. Detection limits are estimated to be 1.3 pg, 0.5 pg, 8 pg, and 17 pg for phosphine, trimethyl phosphine, trimethyl phosphinate ester, and triethyl phosphine, respectively. As found earlier with alkylated sulfur, selenium and tellurium compounds, the detector exhibits a linear response. For triethyl phosphine, a linear range of greater than three orders of magnitude was demonstrated. Emission spectra were obtained for the trimethyl phosphine and triethyl phosphine systems. Chemiluminescence emitters include electronically excited HCF, vibrationally excited HF, and an unknown species in the trimethyl phosphine system. Banded emission from vibrationally excited HF and a broad continuum were observed for both trimethyl phosphine and triethyl phosphine; however, HCF emission was observed only for TMP. Under the conditions employed, the principal emitter is HCF for trimethyl phosphine and HF and the unknown emitter for triethyl phosphine. This detector may have important applications in investigations of the biogeochemical cycling of phosphorus.     

31P NMR assays for rapid determination of enantiomeric excess in catalytic hydrosilylations and transfer hydrogenations

Chiral chlorophosphine (S)-(1,1′-binaphthalen-2,2′-dioxy)chlorophosphine (S)-2 was tested for its performance as a chiral-derivatizing agent (CDA) using solutions of various alcohols, amines, and N-BOC amino acids. Based on ³¹P NMR spectroscopy, the enantiomeric excess was determined within less than 5 min per sample, reaching an accuracy of ±1%. One-pot procedures for a combination of the method with typical homogenous catalytic transformations of prochiral ketones were established. Hydrosilylation products may be analyzed after conversion into alcohols using HF bound to PS-vinyl pyridine co-polymer beads. Transfer hydrogenations simply require solvent evaporation prior to the use of the CDA.     

Synthesis of organic phosphines and phosphine oxides from elemental phosphorus and phosphine in the presence of strong bases

Data on the reactions of elemental phosphorus and phosphine with electrophilic reagents are described systematically and analyzed. These reactions occur in the presence of strong bases and yield primary, secondary, and tertiary phosphines and phosphine oxides. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1695–1702, September, 1998.     

Selective preparation of 1,3-butadienyl phosphines, 1-iodo- and 1,4-diiodo-butadienyl phosphine oxides via zirconocene-mediated cross-coupling of alkynylphosphines

Stereodefined butadienyl phosphines and related derivatives were readily prepared in high yields with perfect regioselectivity via the zirconocene-mediated pair-selective coupling of alkynylphosphines with ethylene or alkynylphosphines with normal alkynes. Interesting and synthetically useful iodination reactions were found when the in situ generated α-phosphinozirconacyclopentenes or α-phosphinozirconacyclopentadienes were treated with I₂.     

Quantitative determination of loadings and oxidation products of polystyrene-bound phosphines using 31p MAS NMR

The use of (31)P magic angle spinning (MAS) NMR for the quantitative determination of resin loadings and the building up of oxidation products was investigated. Loadings of polystyrene-bound phosphines were evaluated via addition of triphenyl phosphate as reference compound. Results for a series of phosphines are consistent with those obtained from well-established analytical methods. The compounds were also investigated with (13)C MAS NMR, and the individual oxidation stabilities were monitored under oxygen atmosphere.     

Complete 1H, 13C{1H}, and 31P NMR spectral parameters of some pyrophosphates

The ¹H, ¹³C{¹H}, and ³¹P NMR spectral parameters of some pyrophosphates were determined in CDCl₃. The most complicated ¹H spectrum can be solved fully only as (A₃MN)R₆XX′R₆′(MNA₃)′, where R₆ (= ―N(CH₃)₂) is coupled only to phosphorus (X). Second‐order coupling between phosphorus was found and solved with iterative analysis. A signal shape of one of the carbon resonance cannot be explained only with couplings. Explanation for exceptional shape was searched from molecular modeling results. Copyright © 2017 John Wiley & Sons, Ltd.     

EPR spectra of anion-radicals of phenyl-bis-(p-nitkophenylethynyl)phosphines and phosphine oxides

Conclusions The hyperfine structure of the EPR spectra of the anion-radicals of some aryl-bis-(p-nitrophenyl-ethynyl)phosphines testifies to a localization of the unpaired electron in one nitrophenylacetylene group.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 205–206, January, 1973.     

Simple31P NMR method for the determination of the enantiomeric purity of chiral O-alkylalkylthiophosphonic acids

The³¹P-(¹H) NMR spectra of bis(alkylalkoxythiophosphoryloxy)phosphonites may be utilized to determine the enantiomeric purity (p) of O-alkylalkylthiophosphonic acids with the application of the Oro equation, p= (Q – Q)/(Q + Q), where Q is the integral intensity of the d, -form, and Q is the integral intensity of the meso forms.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 10, pp. 2225–2228, October, 1989.     

Characterization of active phosphorus surface sites at synthetic carbonate-free fluorapatite using single-pulse 1H, 31P, and 31P CP MAS NMR

The chemically active phosphorus surface sites defined as PO(x), PO(x)H, and PO(x)H2, where x = 1, 2, or 3, and the bulk phosphorus groups of PO4(3-) at synthetic carbonate-free fluorapatite (Ca5(PO4)3F) have been studied by means of single-pulse 1H,31P, and 31P CP MAS NMR. The changes in composition and relative amounts of each surface species are evaluated as a function of pH. By combining spectra from single-pulse 1H and 31P MAS NMR and data from 31P CP MAS NMR experiments at varying contact times in the range 0.2-3.0 ms, it has been possible to distinguish between resonance lines in the NMR spectra originating from active surface sites and bulk phosphorus groups and also to assign the peaks in the NMR spectra to the specific phosphorus species. In the 31P CP MAS NMR experiments, the spinning frequency was set to 4.2 kHz; in the single-pulse 1H MAS NMR experiments, the spinning frequency was 10 kHz. The 31P CP MAS NMR spectrum of fluorapatite at pH 5.9 showed one dominating resonance line at 2.9 ppm assigned to originate from PO4(3-) groups and two weaker shoulder peaks at 5.4 and 0.8 ppm which were assigned to the unprotonated PO(x) (PO, PO2-, and PO3(2-)) and protonated PO(x)H (PO2H and PO3H-) surface sites. At pH 12.7, the intensity of the peak representing unprotonated PO(x) surface sites has increased 1.7% relative to the bulk peak, while the intensity of the peaks of the protonated species PO(x)H have decreased 1.4% relative to the bulk peak. At pH 3.5, a resonance peak at -4.5 ppm has appeared in the 31P CP MAS NMR spectrum assigned to the surface species PO(x)H2 (PO3H2). The results from the 1H MAS and 31P CP MAS NMR measurements indicated that H+, OH-, and physisorbed H2O at the surface were released during the drying process at 200 degrees C.     

Synthesis, solid-state structures, and aggregation motifs of phosphines and phosphine oxides bearing one 2-pyridone ring

Three phosphines and their corresponding oxides bearing one 2-pyridone ring and two benzene rings were synthesized. Their single-crystal X-ray analyses exhibited three kinds of molecular aggregation: bimolecular aggregates, chiral one-dimensional structures, and achiral one-dimensional structures. In the bimolecular aggregate of (2-oxo-1, 2-dihydro-x-pyridyl)diphenylphosphines (x = 3: 2a and 6: 2c), cyclic dimers that are derived from two 2-pyridone rings are observed. In contrast, (2-oxo-1,2-dihydro-5-pyridyl)diphenylphosphine (2b) molecules form a chiral one-dimensional chain via intermolecular hydrogen bonding. In the case of phosphine oxides, their oxygen always acts as a hydrogen acceptor of the hydrogen bonding. Thus, (2-oxo-1,2-dihydro-x-pyridyl)diphenylphosphine oxides (x = 3: 3a and 5: 3b) form hydrogen bonds intermolecularly between the oxygen atom on the phosphoryl group and the hydrogen atom on nitrogen to construct a chiral or an achiral one-dimensional chain. Interestingly, (2-oxo-1,2-dihydro-6-pyridyl)diphenylphosphine oxide (3c) exists as a 2-hydroxypyridine form (enol form) in a crystalline state, and intermolecular hydrogen bonds between the phosphoryl oxygen and the hydroxy proton construct an achiral one-dimensional chain.     

Vibrational, 31P NMR and crystallographic studies of diiodine adducts of some bidentate tertiary phosphine sulfides

Treatment of bis(diphenylphosphino)methane disulfide (dppmS) or bis(diphenylphosphino)ethane disulfide (dppeS) with diiodine in dichloromethane yields the adducts dppmS·I₄ 1 and dppeS·I₄ 2, respectively, whose structures have been solved by X-ray crystallography. Compounds 1 and 2 consist of discrete molecular units containing bent PSI and linear S⋯II geometries that can be interpreted in terms of donation of electron density from sulfur to diiodine. Consistent with this interpretation, the PS bonds are lengthened compared to the unco-ordinated phosphine sulfides, and the II bonds are lengthened compared to unco-ordinated diiodine. Both compounds can therefore be described as ‘charge-transfer’ complexes. The two S⋯II moieties in 1 are inequivalent having markedly different bond lengths and angles. In 2 both S⋯II moieties are identical. The structural features of 1 and 2 are in accordance with Raman and ³¹P CP MAS NMR data.     

Determination of 31P,31P coupling constants in cyclotriphosphazenes and their influence on 1H and 13C NMR spectra of phosphorus substituents

¹H and ¹³C NMR spectra of symmetrically substituted cyclotriphosphazenes exhibit second‐order effects. The influence of the ³¹P,³¹P coupling constants between ring phosphorus atoms on these effects was studied. Some values of this coupling constant between phosphorus bearing identical substituents were measured using ¹³C satellites of the ³¹P signals or by introduction of a chiral substituent on the third phosphorus atom. Copyright © 2003 John Wiley & Sons, Ltd.     

Destructive and non-destructive determination of titanium in yttrium,niobium and tantalum oxides by photon activation

Destructive and non-destructive procedures have been developed for the determination of titanium by photon activation analysis. The non-destructive analyses with an internal standard method are performed on niobium and tantalum oxides while destructive determinations, including non-isotope addition and radiochemical separation, are applied to yttrium oxide samples.