On the adsorption and condensed film formation of binary mixtures of dodecyl-, tetradecyl-, hexadecyl-, and octadecyl-trimethylammonium bromides at the mercury–electrolyte interface

The adsorption and condensed film formation on mercury at the negative potential region for binary mixtures of dodecyltrimethylammonium bromide (DTAB), tetradecyltrimethylammonium bromide (TTAB), cetyltrimethylammonium bromide (CTAB), octadecyltrimethylammonium bromide (OTAB) is studied in KBr at various temperatures from 5 to 45 °C. The formation of the CTAB condensed film is hindered with the addition of DTAB and TTAB. There are interactions between unlike hydrophobic chains. The strong interactions between the CTAB molecules do not take place when DTAB or TTAB is present above a certain concentration. This hindering is more pronounced in the case of TTAB compared to the same DTAB concentration, i.e. the increase of the chain length hinders the film formation. The initially adsorbed molecules play a templating role in the kinetics of the film formation and in the self-assembling of the molecules. The initial induction time strongly depends on the temperature. The less surface active CTAB can hinder the OTAB film formation in binary mixtures. Also, increased interaction between OTAB and CTAB can be observed, indicating synergy effects in the film formation in some cases. The temperature range that the film is formed can be changed using mixtures of surfactants. Thus, the development of the film can become impossible, more difficult or even easier. Hysteresis phenomena are observed. The capacity versus time curves in the case that condensed film is formed are treated with the Avrami plot formulation, giving values between 1.5 and 2 indicating a progressive one dimensional nucleation with constant growth rate or a decrease of the nucleation rate during the overall film formation. There is generally a marked effect of the chain length of the alkyl chain on the film formation.     

The adsorption and condensed film formation of cetyltrimethylammonium bromide at the mercury/electrolyte interface

The adsorption of cetyltrimethyammonium bromide (CTAB) on a hanging mercury electrode is studied in various electrolyte systems and temperatures. A condensed film is formed at negative potentials and at room temperature only in the presence of KBr. The decrease of the temperature favors the formation of the condensed film. Hysterisis phenomena are observed during the potential scans at both directions. Capacity time curves at the potentials where the film is formed show a nucleation and growth mechanism, with induction time depending on potential, which has been investigated using Avrami formulation and has been explained as a progressive one-dimensional nucleation with constant growth rate. The nucleation rate increases while moving toward more negative potentials. A linear decrease of the capacitance with time was observed in some cases independent of the measuring potential in a relative large potential range. The different types of micelles can affect the adsorption of CTAB on mercury. An unusual capacitance transient observed at a very narrow negative potential range is attributed to the formation of hemicylinders. The condensed film in the presence of the other electrolytes is observed only at high concentrations (1 M) and very low temperatures (5 degrees C).     

Effect of the deaeration on the adsorption of some cationic surfactants at the mercury/electrolyte solution interface

The effect of the deaeration on the adsorption of three cationic surfactants cetyldimethylbenzylammonium chloride (CDBACl), cetyltrimethylammonium bromide (CTAB) and octadecyltrimethylammonium bromide (OTAB) at the mercury/electrolyte solution interface is studied. The deaeration is studied using either nitrogen or helium and the effect of deaeration process and time is also studied. In all cases an effect of the deaeration time is found which is mainly observed at potentials where a condensed film is formed. Capacity-time curves at the potentials where the film is formed show a nucleation and growth mechanism with induction time that depends on the deaeration time. The deaeration slows down the kinetics of the film formation but does not change the equilibrium capacitance value of the film. The decrease of the dissolved gas from the water that perturbs its structure is perhaps the main reason for the behaviour observed during the adsorption of these surfactants.     

Adsorption of cetyltrimethylammonium bromide and cetyldimethylbenzylammonium chloride on a hanging mercury electrode studied by adsorptive transfer stripping voltammetry

The adsorption of cetyltrimethylammonium bromide (CTAB) and cetyldimethylbenzylammonium chloride (CDBACl) on a hanging mercury electrode is studied using adsorptive transfer stripping voltammetry. The surfactants are adsorbed on mercury and are then transferred in KBr or KCl under various conditions, including temperatures from 1 to 40°C, open or closed circuits with different initial potentials, and repeated scans, etc. The results are compared with previously published results on the adsorption of CTAB or CDBACl on mercury, where condensed films were formed and are quite different than those obtained by adsorptive stripping voltammetry. In this case, an absence of condensed film is observed for CTAB. A condensed film with low capacitance value is formed in the case of CDBACl after transfer at low temperatures, or after repeated scans, resulting in reorientation of the molecules to more compact states. Capacity time curves at the potentials where the film is formed show in a few cases a nucleation and growth mechanism, with induction time and studied by the Avrami formulation, while an observed increase of the capacitance with time is attributed to the formation of hemimicelles. The results also indicate the importance of interactions between the hydrophobic chains.     

X-ray diffraction study of the structure of carboxymethylcellulose-cationic surfactant complexes.

We have investigated dilute aqueous solutions of an anionic polymer (carboxymethylcellulose) mixed with cationic surfactants of different chain lengths (dodecyl to octadecyl trimethylammonium bromides: DTAB, TTAB, CTAB and OTAB). The structures of the concentrated phases formed above the precipitation threshold were studied by X-ray diffraction. Different body-centred cubic structures with space groups Pm3n were observed in the presence of surfactant with a short aliphatic chain (DTAB), despite the fact that the polymer persistence length is comparable to the repeat distance of the structure (5 nm). For larger surfactant chain lengths (TTAB and CTAB), the structure of the precipitates can be either cubic (Pm3n) or 2D hexagonal depending on the initial surfactant and polymer concentrations. For still larger chain length (OTAB), the structure becomes lamellar. This structural evolution from micellar cubic towards 2D hexagonal and lamellar is attributed to the decrease of the local curvature of the surfactant aggregates, as observed for flexible synthetic polymers and short DNA fragments under similar conditions. Furthermore, the structure of the bulk complexes formed just below the precipitation threshold anticipates the structure seen in the precipitated phases.     

On the adsorption of cetyldimethylbenzylammonium chloride at the mercury/electrolyte solution interface

The adsorption of cetyldimethylbenzylammonium chloride (CDBACl) on the hanging mercury electrode is studied in various supporting electrolytes at various temperatures from 1 to 50 degrees C. A condensed film with low capacitance is formed at negative potentials at transition temperatures below approximately 40 degrees C. The decrease of the temperature favors the film formation, and increases the width of the capacitance pit, while its value remains practically constant. Hysteresis phenomena are also observed during different scan directions. Capacitance-time curves at the potentials where the film is formed show in some cases a nucleation and growth mechanism with induction time and studied by the Avrami formulation. At high temperatures an increase of the capacitance with time is observed depending on the CDBACl concentration and slightly on the electrolyte used, and is attributed to the formation of hemimicelles. At high negative potentials a second narrow region with lower capacitance values is observed. This is easily observed at very high temperatures, while it is absent at lower temperatures. It depends upon the concentration of CDBACl and the electrolyte used. The results are different from those obtained for the adsorption of cetyltrimethylammonium bromide on mercury, indicating the importance of interaction between the hydrophobic chains.     

阳离子表面活性剂溶液的临界胶束浓度及扩散系数

在无探针分子条件下用循环伏安法(CV)研究了DTAB,TTAB,CTAB,OTAB水溶液体系胶束在玻碳电极(GCE)上的电化学行为,并用电位阶跃计时库仑法(CC)测定了胶束的扩散系数,进而得到第一与第二CMC,该方法简捷、快速、准确。对离子型表面活性剂的第二CMC提供了新的测定方法。     

Condensed film formation of binary mixtures of cetyltrimethylammonium bromide and cetyldimethylbenzylammonium chloride in a wide potential region at the mercury/electrolyte interface

The adsorption of binary mixtures of cetyltrimethylammonium bromide (CTAB) and cetyldimethylbenzylammonium chloride (CDBACl) at the mercury/electrolyte interface was studied in various electrolyte systems. The optimum surfactant concentration and electrolyte ratio was searched for, to obtain the formation of a condensed film at as wide a potential range as possible at the highest temperature possible. The optimum conditions found were 2 x 10(-4) M CTAB and 2 x 10(-4) M CDBACl in 0.07 M KF and 0.03 M KBr at 2 degrees C. The capacitances vs time curves were used for the reconstruction of isochronous capacitance vs potential curves. These curves showed that in that system the condensed film was formed in the potential range from -0.4 to -1.9 V vs Ag/AgCl in less than 220 s. The stability of this film, following the removal of the mercury drop from the solution, was also studied.     

Interaction between 14mer DNA oligonucleotide and cationic surfactants of various chain lengths

In the recent genomic era, a novel gene silencing approach has been introduced based on the use of small synthetic oligonucleotides, such as antisense RNAs, siRNAs, to inhibit the expression of a specific target gene. Successful implementation of this methodology calls for the development of efficient systems to deliver small oligonucleotides into the cells using various natural and synthetic cationic agents. While extensive studies have focused on the interaction of various natural and synthetic cationic surfactants with long DNA, less attention has been paid to surfactant interaction with small oligonucleotides. In this study, the interaction between 14mer double stranded DNA and alkyltrimethylammonium bromides of C16 (cetyl, CTAB), C14 (tetradecyl, TTAB), and C12 (dodecyl, DTAB) chain lengths was investigated at different charge ratios by gel electrophoresis, ethidium bromide exclusion, circular dichroism, and UV melting. Our gel studies at 1 microM oligonucleotide concentration showed that CTAB, TTAB, and DTAB neutralize the oligonucleotides at a charge ratio (Z+/-) of 1, 14, and 50, respectively. At lower charge ratios, CTAB and TTAB interact with oligonucleotides, and the complexes show electrophoretic mobility shifts in the gel, while such mobility shifts were completely absent in the case of DTAB. UV melting experiments revealed that interaction with all three surfactants increased the thermostability of the oligonucleotide. The extent of thermal stabilization was highest in the case of CTAB, moderate in the case of TTAB, and extremely low in the case of DTAB. Oligonucleotides within fully neutralized complexes denatured at further higher temperatures, and again, stabilization was the highest in the case of CTAB followed by TTAB and DTAB, hence revealing that the oligonucleotides interacted more strongly with CTAB than with the other two surfactants. Ethidium bromide exclusion studies also supported our UV melting studies, confirming that CTAB binds most strongly to the oligonucleotide. CD titrations of oligonucleotides with increasing amounts of surfactants revealed common spectral patterns consisting of the progressive loss of CD signals for native helical DNA conformations. Overall, our results demonstrate that interaction between oligonucleotides and cationic surfactants, although qualitatively similar to long double stranded DNA, shows subtle differences that need to be understood to improve small oligonucleotide delivery into the cells by using common delivery agents that have been used to deliver long pieces of DNA.     

Removal of solvent-based ink from printed surface of HDPE bottles by alkyltrimethylammonium bromides: effects of surfactant concentration and alkyl chain length

Three alkyltrimethylammonium bromides (i.e., dodecyl-, tetradecyl-, and hexadecyltrimethylammonium bromide or DTAB, TTAB, and CTAB, respectively) were used to remove a blue solvent-based ink from a printed surface of high-density polyethylene bottles. Either an increase in the alkyl chain length or the surfactant concentration was found to increase the deinking efficiency. Complete deinking was achieved at concentrations about 3, 8, and 24 times of the critical micelle concentration (CMC) of CTAB, TTAB, and DTAB, respectively. For CTAB, ink removal started at a concentration close to or less than its CMC and increased appreciably at concentrations greater than its CMC, while for TTAB and DTAB, significant deinking was only achieved at concentrations much greater than their CMCs. Corresponding to the deinking efficiency of CTAB in the CMC region, the zeta potential of ink particles was found to increase with increasing alkyl chain length and concentration of the surfactants, which later leveled off at some higher concentrations. Wettability of the surfactants on an ink surface increased with increasing alkyl chain length and concentration of the surfactants. Lastly, solubilization of ink binder in the surfactant micelles was found to increase with increasing alkyl chain length and surfactant concentration. We conclude that adsorption of surfactant on the ink pigment is crucial to deinking due to modification of wettability, zeta potential, pigment/water interfacial tension, and dispersion stability. Solubilization of binder (epoxy) into micelles is necessary for good deinking because the dissolution of the binder is required before the pigment particles can be released from the polymer surface.     

THE EFFECTS OF MIXED MICELLES OF SURFACTANTS ON POLYMERIZATION OF ACRYLAMIDE

The polymerization of acrylamide in mixed micellar solutions of surfactants, initiated by NaHSO₃ has been studied at 20 and 3Q° C with time variable method of thermokinetics for 1. 5-order reaction. The results indicate that the mixed micellar systems of cationic or anionic with zwitterionic surfactants (SLS/ CTAB, SLS/ TTAB, SLS/ SDS) and cationic with nonionic surfactants (Brij 357sol; CTAB, Bri-J35/TTAB, Brij35/ DTAB) have catalytic effect on the polymerization in the order, at 20° C. SLS/ SDS SLS/ TTAB SLS/ CTAB Brij35/ CTAB at 30° C SLS/ SDS SLS/ TTAB≈ / CTAB Bri-j35/ DTAB= sBrij35/ TTAB as Brij35/ CTAB, while Brij35/ SDS mixed micellar system has inhibition. These effects are attributed to the effect of the Stern layer of mixed micelles on the step of initiator (HSOT) to form free radical.     

Spontaneous vesicles, disks, threadlike and spherical micelles found in the solubilization of DMPC liposomes by the detergent DTAC

Iron oxide/MCM-41 nanocomposites, Fe(2)O(3)/MCM-41, containing 5%, 10%, and 20% (w/w) iron oxide, were prepared via a direct nonhydrothermal method at room temperature. The preparations were preformed by using iron(III) nitrate, tetra-ethoxysilane (TEOS), and cetyltrimethylammonium bromide (CTAB) mixed or unmixed with dodecyltrimethylammonium bromide (DTAB). The produced materials were dried and calcined at 550 °C for 3 h. Test materials were characterized by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), N(2) gas adsorption/desorption isotherms, small angle and wide angle X-ray diffraction (XRD). Results indicate that mixing of CTAB with DTAB does not harm the formation of blank MCM-41 structure. For the composite Fe(2)O(3)/MCM-41 materials, results showed formation of more stable MCM-41 structure with higher surface area and improved porosity in the presence of mixed (CTAB+DTAB) than in the presence of single (CTAB) surfactants for up to 10% Fe(2)O(3)/MCM-41 (w/w). This was explained in terms of the effect DTAB on contraction of the template micellar size to compensate for the expected size expansion upon the addition of ionic iron(III) nitrate precursor. Highly dispersed Fe(2)O(3) nanoparticles were formed in all cases even with the highest iron oxide percentage. Formation of the nanocomposites was postulated to be determined by fast nucleation and slow growth of iron oxide species, which facilitated formation of well dispersed iron oxide nanoparticles inside and on the wall of the MCM-41 material.     

Polymer-Surfactant Interactions and the Effect of Tail Size Variation on Micellization Process of Cationic ATAB Surfactants in Aqueous Medium

The interactions between oppositely charged surfactant-polymer systems have been studied using surface tension and conductivity measurements and the dependence of aggregation phenomenon over the polyelectrolyte concentration and chain length of cationic ATAB surfactants, cetyltrimethyl ammonium bromide (CTAB), tetradecyltrimethyl ammonium bromide (TTAB), and dodecyltrimethyl ammonium bromide (DTAB) have been investigated. It was observed that cationic surfactants induce cooperative binding with anionic polyelectrolyte at critical aggregation concentration (cac). The cac values of ATAB surfactants in the presence of anionic polyelectrolyte, sodium carboxy methyl cellulose (NaCMC), are considerably lower than their critical micelle concentration (cmc). After the complete complexation, free micelles are formed at the apparent critical micelle concentration (acmc), which is slightly higher in polyelectrolyte aqueous solution than in pure water. Among the cationic surfactants (i.e., CTAB, TTAB, and DTAB), DTAB was found to have least interaction with NaCMC. Surfactants with longer tail size strongly favor the interaction, indicating the dependence of aggregation phenomenon on the structure, morphology, and tail length of the surfactant.      

表面胶团修饰电极电化学测定双酚A的增敏机理及抗污性能研究

分别以2种阴离子表面活性剂(SDS、SDBS)、3种季铵盐阳离子表面活性剂(CTAB、TTAB、DTAB)和2种季铵盐型双子表面活性剂(12-3-12、12-4-12)修饰碳糊电极。通过原子力显微镜、接触角以及分析物在电极表面的电化学行为探讨了不同表面活性剂在电极表面的吸附情况,推测在浓度大于临界胶束浓度(CMC)时,季铵盐型阳离子表面活性剂CTAB、TTAB、12-3-12和12-4-12在碳糊电极表面形成了圆柱形的表面胶团,而DTAB和SDS可能是饱和单分子层吸附。以BPA为分析物,研究了表面活性剂修饰电极对BPA的电化学增敏机理,结果表明修饰电极对双酚A(BPA)的电化学增敏作用主要是因为表面胶团对BPA的增溶作用,表面活性剂和BPA间的阳离子-π作用是表面胶团增溶BPA的主要原因。     

MICELLE FORMATION BY ANIONIC AND CATIONIC SURFACTANTS IN AQUEOUS 18-CROWN-6 ETHER,P-CYCLODEXTRIN,AND 1,10-PHENANTHROLINE SOLUTIONS AT DIFFERENT TEMPERATURES

The conductances of sodium perfluorooctanoate (SPFO), sodium dodecylsulphate (SDS), dodecyltrimethylammonium bromide (DTAB), and tetradecyltrimethylammonium bromide (TTAB) in 18-crown-6 ether + water (CR+W), p-cyclodextrin + water (CY+W), and 1,10-phenanthroIine + water (Phen+W) mixtures with fixed 4 mM of each additive were determined over the temperature range of 5-55 °C. The conductivity plots for all the surfactants showed single break from which the critical micellization concentration (cmc) and degree of micelle ionization (x) were computed. From the pre and the post micellar slopes of the conductivity curves, the equivalent conductivities of the monomeric (Aass) and the micellar states (Amjc), respectively, were calculated and discussed with respect to the surfactant-additive complexation. It was observed that the micelle formation of all the ionic surfactants irrespective of the nature of their head groups were delayed in CYC+W in comparison to that in CR+W and Phen+W systems over the temperature range studied. The micelle formation of SPFO and SDS in CR+W and Phen+W systems showed stabilization of the respective micelles due to the adsorption of Na⁺-CR and Na+-Phen complexes at the micelle solution interface in comparison to that of DTAB and TTAB.     

The formation and reduction of anodic films on electrodeposited ruthenium

The formation and reduction of anodic films on bright ruthenium was investigated using substrates prepared by electrodeposition onto gold-plated platinum from a commercial ruthenium bath operated at 70°C. Anodic films formed on the ruthenium may be reduced by maintaining the electrode at potentials below 0.2 V. The reduction behaviour was markedly affected by the anodization potential and, at short times, by the period of anodization. The bell-shaped cathodic current-time curves observed with films produced at potentials in the region of 1.2 V, suggest that the process in this case involves nucleation of reduction centres on a relatively stable surface layer. The influence of potential, time, and both the concentration and nature of the electrolyte on the extent of anodic film formation was investigated. The results are discussed in terms of the formation of stable phase oxides in the relatively thick anodic film produced on the ruthenium surface.     

Interaction between silicates and ionic surfactants in dilute solution

Understanding the interaction between silicate ions and surfactants is critical for the design and development of mesoporous siliceous materials. We examined the interaction between sodium silicate ions and three different cationic surfactants [namely, cetyltrimethylammonium bromide (CTAB), tetradecyltrimethylammonium bromide (TTAB), and dodecyltrimethylammonium bromide (DTAB)] and an anionic surfactant [sodium dodecyl sulfate (SDS)] in dilute solution at room temperature. From the combination of several techniques, such as conductometric and potentiometric titrations, dynamic light scattering, and isothermal titration calorimetry, the phase behavior of the sodium silicate and CTAB system was determined. We observed that the aggregation behavior of the silicate-CTAB system is similar to that of a polymer-surfactant system. The formation of the silicate-CTAB complex is induced by the adsorption of SiOH and SiO- groups, aided by CTAB unimers. The electrostatic attraction and hydrophobic interaction are the dominant forces controlling the formation of silicate-CTAB complexes. When these complexes are saturated with CTAB unimers, free CTAB micelles are then produced. TEM micrographs revealed that a stable Si-O-Si network is absent within the silicate-CTAB complexes, and surprisingly, stable silicate-CTAB complexes with ordered structure were observed. The present finding is important for understanding the interaction between silicate and surfactant in the synthesis of mesoporous structure in the dilute solution regime.     

Mixed Micellization Behavior of 12-2-12 Gemini Surfactant with Some Alkyltrimetyl Ammonium Bromide Surfactants

Mixed micellization behavior of dimeric cationic surfactant ethanediyl-1,2-bis (dimethyldodecylammonium bromide) (12-2-12) with a series of monomeric cationic surfactants dodecyltrimethyl ammonium bromide (DTAB), tetradecyltrimethyl ammonium bromide (TTAB), and cetyltrimethyl ammonium bromide (CTAB) has been studied in aqueous and aqueous polyvinylpyrrolidone (PVP) solutions at 298.15, 308.15, and 318.15 K, respectively, using conductometric method. Various thermodynamic parameters like mixed micelle concentration (C_m), micelle mole fraction (X₁), interaction parameter (β), and free energy of mixing (ΔG_ex) of the mixed systems have been determined and analyzed using Rubingh's regular solution theory. The results indicate that in aqueous solutions the binary mixtures of 12-2-12 with DTAB/TTAB behave nonideally with mutual synergism whereas that with CTAB shows almost ideal behavior at 298.15 K. At 318.15 K, all these binary mixtures exhibit antagonistic behavior. The effect of variation in chain length of alkyltrimethyl ammonium bromide surfactants on the interactions with 12-2-12 have also been evaluated and discussed.     

Scintillation phase method: A new approach for studying surfactant behavior at liquid/liquid interface

Radiochemical approach for the investigation of partitioning and adsorption of surfactants at water-oil interfaces has been developed. The so-called “scintillation phase method” is based on the introduction of tritium labeled surfactant in an aqueous phase of the water-oil system followed by measuring radioactivity of the whole system. Partition coefficients and the value of adsorption at water-non-polar liquid interfaces of homologous series of alkyltrimethylammonium bromides (DTAB, TTAB and CTAB) have been experimentally determined by means of scintillation phase method. The influence of non-ionic surfactants on TTAB adsorption has also been studied.     

Self-aggregation and antimicrobial activity of imidazolium and pyridinium based ionic liquids in aqueous solution

Adsorbed cetyldimethylbenzylammonium chloride (CDBACl) or cetyltrimethylammonium bromide (CTAB) on mercury is used as template for the adsorption of CTAB, CDBACl, or their equimolar mixture at 20 °C. Adsorptive stripping voltammetry with the two step procedure is used. The results are compared with previously published results on the adsorption of CTAB and CDBACl on mercury and then transferred in base electrolyte. A surfactant is preadsorbed. The adsorption of the second does not remove away from the mercury the first one, as evidenced by the capacitance measurements and the repeated scans. The surfactants were maintained close to each other and in the vicinity of the electrode by the applied electric field. In all cases studied, there was a decrease in the capacitance in the potential range -0.8 to -1 V to very low capacitance values forming condensed film. Mixed films and synergy effects were observed. The already adsorbed CTAB on mercury did not permit the desorption-reorientation peaks of CDBACl. Shifts of the capacitance peaks were observed to more positive potentials and were attributed to the occurrence of a slow change in the organization of the monolayer. The electrical state of the preadsorbed surfactant would be of critical importance in the formation of the various structures. The results suggested that the ordering and arrangement of molecules could be controlled by appropriate selection of templates.