激光烧蚀Al+与乙醇团簇的反应研究

利用激光烧蚀-分子束法对Al等离子体与乙醇团簇的反应进行了研究.飞行时间质谱测得的主要反应产物有Al⁺(C₂H₅OH)_n (n=3～10)与H⁺(C₂H₅OH)_n (n=1～14)团簇正离子和(C₂H₅OH)_n(H₂O)OH^- (n=0～8)团簇负离子.实验发现,烧蚀产生的Al等离子体与脉冲分子束的不同位置反应,对团簇离子的类别、大小及强度分布均产生很大影响.Al等离子体与脉冲分子束的前段反应,主要产生金属-复合物团簇离子Al⁺(C₂H₅OH)_n,且信号较强;Al等离子体与脉冲分子束的中段及后段反应,主要产生质子化团簇离子H⁺(C₂H₅OH)_n和团簇负离子(C₂H₅OH)_n(H₂O)OH^-,同时还出现强度较小的其他水合团簇离子,如H⁺(H₂O)m(C₂H₅OH)_n (m=1～2)等.     

系列Sm3+配合物的合成、结构及光物理性能

采用水热方法合成了4种Sm³⁺配合物, 即{[SmZn(2,5-pdc)₂(tp)_0.5(H₂O)]·2H₂O}_n(1), [Sm₂Zn₂(C₆H₅COO)₁₀(Imh)₂(H₂O)₂](2), {[Sm₂(NO₂C₆H₄COO)₆(H₂O)₄]·H₂O}_n(3)和{[SmN(CH₂COO)₃(H₂O)₂]·H₂O}_n(4)[2,5-pdc=2,5-吡啶二羧酸根, tp=对苯二甲酸根, C₆H₅COO=苯甲酸根, Imh=咪唑, NO₂C₆H₄COO=对硝基苯甲酸根, N(CH₂COO)₃=氨三乙酸根]. 通过单晶X射线衍射确定了其晶体结构. 在室温下测定了其红外光谱、 紫外-可见-近红外光谱以及在近红外区和可见区的发射光谱. 结果表明, 4种配合物在近红外区或可见区均出现Sm³⁺离子的特征发射. 这是形成配合物后, Zn-配体部分和配体对Sm³⁺离子发光的敏化作用所致. 此外, 讨论了不同有机配体或d过渡金属离子对Sm³⁺离子发光的影响, 并分析了配合物中Sm³⁺离子的近红外发射带位移、 劈裂和加宽的原因.     

双帽Keggin型杂多阴离子[PM12O40(VO)2]n-(M=Mo,n=5; M=V,n=9)的离散变分方法研究

使用密度泛函理论的离散变分方法(DFT-DVM)研究了双帽Keggin型杂多阴离子[PM₁₂O₄₀(VO)₂]^n--(M=Mo,n=5; M=V,n=9),即[PMo₁₂O₄₀(VO)₂]^5- (a)和[PV₁₂O₄₀(VO)₂]^9- (b)的电子结构,讨论了双帽的形成对Keggin型杂多阴离子的电子结构和催化性质的影响,并与其Keggin型杂多阴离子(PM₁₂O₄₀)_n-(M=Mo,n=3; M=V,n=15)的计算结果进行了对比分析,计算结果表明,双帽的形成对Keggin型杂多阴离子的电子结构产生了很大的影响,因而它们在催化活性上可能会表现出较大的差异.     

阴离子插层镁铝水滑石结构及相互作用的理论研究

采用密度泛函理论(DFT)计算了MgAl-LDHs层板与无机阴离子(F^-、Cl^-、NO₃^-、CO₃^2-、SO₄^2-)和有机阴离子(水杨酸根离子([HO(C₆H₄)COO]^-)、苯甲酸根离子([(C₆H₅)COO]^-)、对二甲氨基苯甲酸根离子([p-(CH₃)₂N(C₆H₄)COO]^-)、十二烷基磺酸根离子[C₁₂H₂₅SO₃]^-、己烷基磺酸根离子[C₆H₁₃SO₃]^-、丙烷基磺酸根离子[C₃H₇SO₃]^-)间的相互作用,获得稳定超分子几何结构及相互作用能。层板主体与客体间存在较强的超分子作用,包括主客体间静电作用和氢键等。主、客体间相互作用能数值大小顺序为CO₃^2- > SO₄^2- > F^-> Cl^-> NO₃^-;[p-(CH₃)₂N(C₆H₄)COO]^-> [(C₆H₅)COO]^-> [HO(C₆H₄)COO]^-和[C₁₂H₂₅SO₃]^-> [C₆H₁₃SO₃]^- > [C₃H₇SO₃]^-。另外,还采用自然键轨道(NBO)计算和分析了LDHs 层板与阴离子间作用机理,从二阶微扰理论计算得到的稳定化能变化趋势与相互作用能数据基本吻合。     

三种不同碳桥联双核茂钛配合物的合成及催化乙烯聚合研究

合成了3种不同结构的CnH₂n桥联双核茂钛配合物(CH₃)₂C[(C₅H₄)TiCl₂(C₅H₅)]₂(3),(CH₂)_n[(C₅H₄)TiCl₂(C₅H₅)]₂(6,n=3;7,n=4),并用1HNMR进行了表征.发现以甲苯为溶剂时,不仅提高了产率,而且有效地避免了副产物Cp₂TiCl₂的生成.研究了化合物7/MAO(甲基铝氧烷)催化乙烯聚合的反应,考察了反应条件对催化体系的影响.结果表明,催化活性随着n(Al)/n(Cat.)比的增大而提高,聚乙烯的分子量在n(Al)/n(Cat.)=500和50℃时达到最高值9.0102×10⁴;随着聚合时间的延长,催化活性下降,而产物分子量不断升高;随着温度的上升,50℃时催化活性和聚乙烯的分子量最高,分别为2.4074×10⁵gPE/(molTi·h)和6.8679×10⁴.随着桥联双核茂钛配合物碳桥的增长,催化活性增加,所得聚乙烯的分子量降低.     

半氟烃链苯并菲盘状液晶的合成及其介晶性

全氟烃链的憎氟效应(fluorophobic effect)可有效地促使棒状分子形成近晶相, 并稳定液晶相. 为进一步探讨氟效应对盘状分子介晶性的影响, 合成了一系列全氟酯链的苯并菲化合物C₁₈H₆(OC_nH_2n＋1)₅(OCOC₂H₄C₆F₁₃) (a), 以及另一系列相对应的不含氟化合物C₁₈H₆(OC_nH_2n＋1)₅(OCOC₈H₁₇) (b), n＝4～9. DSC检测和偏光显微镜观察显示两类化合物都为柱状相热致型液晶. 化合物a与相对应的化合物b比较, 其熔点和清亮点上升, 柱状相的热稳定性增强.     

具有含磷、硫配体的二核和三核钌羰基簇合衍生物的合成及晶体结构

用Ru₃(CO)12与杂环二硫代次膦酸盐SP(C₆H₄OR)(S)N(C₆H₅)NC(Me)(R=Me,Et)反应,得到两类4个含磷、硫配体的二核和三核钌羰基簇合衍生物Ru₃(CO)₈(μ₃-S)₂[P(C₆H₄OR)N(C₆H₅)NC(Me)S](1;R=Me;3;R=Et)和Ru₂(CO)₆[μ-η₂-SC(Me)NN(C₆H₅)P(C₆H₄OR)](2;R=Me;4;R=Et).对它们进行了元素分析、IR、¹HNMR和MS谱学表征,并用X射线衍射技术测定了1和2的晶体结构.晶体1属三斜晶系,P1空间群,晶胞参数a=1.0755(2)nm,b=1.5760(2)nm,c=0.9078(1)nm,α=98.12(7)°,β=96.64(4)°,γ=79.67(5)°,V=1.4921(4)nm³,Z=2,R(wR)=0.0303(0.0615);该簇合物分子为开口三核钌簇,其簇骨架Ru₃(μ₃-S)₂为畸变四方锥构型;五元杂环上的P原子取代在Ru1原子的轴向配位位置上.晶体2属单斜晶系,P2(1)/n空间群,晶胞参数a=1.1243(4)nm,b=1.4105(5)nm,c=1.62945(7)nm,β=107.06(5)°,V=2.4702(2)nm³,Z=4,R(wR)=0.0248(0.0441);两核簇合物分子中含有2个六元螯环Ru1SCNNP和Ru2SCNNP,增强了簇合物的稳定性.     

C1～C3正构醛、醇在质子转移反应飞行时间质谱中的产物离子特征分析

为分析C₁～C₃正构醛、 醇化合物在质子转移反应飞行时间质谱(PTR-TOF MS)中的产物离子特征, 考察了不同E/N值(E: 电场强度, N: 气体分子数密度)下C₁～C₃正构醛、 醇的产物离子种类和强度的变化. 结果表明, 低分子量正构醇类(甲醇、 乙醇和丙醇)倾向于形成质子化聚合物[nMH]⁺及其失水离子[nMH-H₂O]⁺, 且随着E/N值升高, 醇类会产生较多裂解碎片和多聚体离子. 低分子量正构醛(甲醛、 乙醛和丙醛)主要产生质子化产物[MH]⁺和一水合质子化产物[M·H₃O]⁺, 高E/N值(>125 Td)会抑制甲醛质子化, 也会抑制其加合产物的生成. 乙醛倾向于形成水加合物, 且随着E/N值增高, 质子化乙醛与一水合质子化乙醛的变化趋势相反. 另外, 丙醛在较高的E/N值下会产生一系列聚合物, 如[MH·C₂H₅]⁺和[2MH]⁺. 通过分析C₁～C₃正构醛、 醇的质子转移反应特征及产物离子形成过程, 获得了C₁～C₃正构醛、 醇的特征离子和对应的最佳E/N设置值, 为低分子量醛、 醇的定性分析提供了重要依据.     

新型双四面体过渡金属簇合物的合成与表征

利用Co₂(CO)₈与[Cl₃CC(O)OCH₂]₂的反应合成了以C(O)OCH₂CH₂OC(O)桥联两个Co₃C四面体骨架为特征的新型双四面体簇合物[(CO)₉Co₃(μ₃-C)C(O)OCH₂]₂(1);1与不同物质的量比的Na[M(CO)₃C₅H₄R](M=Mo,W;R=H,C(O)Me)反应,得到一步交换的产物(CO)₉Co₃(μ₃-C)C(O)OCH₂CH₂OC(O)(μ₃-C)Co₂M(CO)₈(C₅H₄R)[M=Mo,R=H(2);M=Mo,R=C(O)Me(3);M=W,R=H(4);M=W,R=C(O)Me(5)]或两步交换的产物[(C₅H₄R)(CO)₈Co₂M(μ₃-C)C(O)OCH₂]₂[M=Mo,R=H(6);M=Mo,R=C(O)Me(7);M=W,R=H(8);M=W,R=C(O)Me(9)].5或9分别与Na[Mo(CO)₃C₅H₅]以12的物质的量比反应得到含一个手性四面体骨架(CoMoWC)的(C₅H₅)(CO)₈Co₂Mo(μ₃-C)C(O)OCH₂CH₂O·C(O)(μ₃-C)CoMoW(CO)₇(C₅H₄C(O)Me)(C₅H₅)(10)或含两个手性四面体骨架(CoMoWC)的[(C₅H₅)(C₅H₄C(O)Me)(CO)₇CoMoW(μ₃-C)C(O)OCH₂]₂(11);对化合物1_11进行了CH元素分析、IR和¹HNMR等表征.结果表明,在金属交换反应中处于不同簇环境下的Co(CO)₃基团反应活性不同.对化合物1进行了晶体X射线衍射分析.化合物1的晶体属单斜晶系,P2₁/n(#14)空间群,晶胞参数a=0.933 0(2)nm,b=1.519 7(4)nm,c=1.178 3(4)nm,=91.16(2)°,Z=2,F(000)=972.分子结构呈中心对称.     

四芳基卟啉锰配离子的TCNQ电荷转移盐的合成和物理性质

合成了13个四芳基卟啉锰配离子的TCNQ电荷转移盐[TAPMn][TCNQ]_n(TAPH₂=α,β,γ,δ-四芳基卟啉;A=C₆H₅,4-CH₃C₆H₄,4-CH₃OC₆H₄,4-ClC₆H₄,3-ClC₆H₄,3-FC₆H₄,4-(CH₃)₂NC₆H₄,2,4-Cl₂C₆H₃;TCNQ=7,7,8,8-四氰基对苯醌二甲烷;n=1,2).通过元素分析、IR、XPS、ESR、磁化率和电导率对其进行了表征.结果表明:这些电荷转移盐分子中存在TCNQ⁰和TCNQ^-,且TCNQ⁰和TCNQ^-之间存在相互作用,部分电荷从[TCNQ]_n^-向[TAPMn]⁺转移,导致化合物中的锰表现为混合价态.复合盐的室温电导率在10^-7～10^-10S·cm^-1,属于有机半导体,简单盐的室温电导率小于10^-11S·cm^-1.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.