共查询到20条相似文献,搜索用时 78 毫秒
1.
Mohammad Sideeq Rather Kowsar Majid Ravinder Kumar Wanchoo Madan Lal Singla 《Journal of Thermal Analysis and Calorimetry》2014,117(2):611-619
This paper involves the synthesis of polyaniline composite with photoadduct of potassium hexacyanoferrate and imidazole via photochemical route by oxidative polymerization technique by ammonium persulphate. The photoadduct has been synthesized by photoirradiation followed by substitution with imidazole ligand. The photoaquation, substitution and successful synthesis has been proved by recording pH, UV visible spectra before and after irradiation and XRD of photoadduct. The as synthesized composite has been subjected to various characterizations like elemental analysis, UV–Visible spectra, FTIR, XRD, SEM, and TG/DTG. XRD of photoadduct shows crystalline structure which has been retained in the composite, changing the amorphous structure of polyaniline into the crystalline one, hence proving the insertion of photoadduct in the polymer chain. Various parameters like crystallite size (L), interplanar distance (d), micro strain (ε), dislocation density (δ) and distortion parameters (g) were calculated from XRD data. Thermal analysis shows the high thermal stability of composite which can be due to strong interaction between polymer chain and the photoadduct which restricts the thermal motion of polyaniline and thus enhances the thermal stability of composite. 相似文献
2.
Photoinitiated substitution complex of [Fe(CN)6]4- with imidazole has been synthesized and characterized. On the basis of elemental analysis, the empirical molecular formula of the complex is K4[Fe(CN)5(C3H4N2)]·4H2O. The substitution of aquo ligand produced as a result of photoexcitation by imidazole has been confirmed by various spectroscopic thechniques like UV-Vis, FTIR, NMR, and SEM techniques. The characteristic FTIR and NMR ab- sorption peaks for different entities present support the assigned formul... 相似文献
3.
以氧化石墨(GO)为掺杂剂和模板,采用化学原位聚合法并通过调节苯胺单体和氧化石墨的质量比,合成了层状结构的聚苯胺/氧化石墨(PANI/GO)层状结构的自支撑膜。SEM和XRD研究表明,当苯胺单体与GO的质量比为67:1时,PANI/GO复合材料具有层间距~1.36 nm的层状结构,证实 GO的模板功能。XPS和FTIR研究表明PANI/GO复合材料中的典型的聚苯胺的掺杂态,进一步证实GO的掺杂功能。此外,电化学和热失重测量表明PANI/GO层状结构的自支撑膜呈现良好的热稳定性和高电化学活性. 相似文献
4.
以苯胺为原料,采用原位聚合法在聚四氟乙烯(PTFE)基体上合成聚苯胺/聚四氟乙烯(PANI/PTFE)复合膜.利用光学显微镜、扫描电子显微镜(SEM)、傅里叶变换红外光谱(FTIR)、紫外-可见吸收光谱(UVVis)和静态水接触角测试对PANI/PTFE复合膜的形貌、结构和浸润性进行分析,并对其油包水乳液分离性能、通量和循环使用性能进行了测试.研究结果表明,PANI/PTFE复合膜仅在重力条件就能有效分离油包水乳液;而且重复数十次过滤后,PANI/PTFE复合膜仍具有良好的抗污能力和分离性能. 相似文献
5.
Zihang Huang Shaoxu Wang Hui Li Shihui Zhang Zhicheng Tan 《Journal of Thermal Analysis and Calorimetry》2014,115(1):259-266
Polyaniline/rare earth oxide composites (PANI/La2O3 and PANI/Sm2O3) were synthesized by in situ polymerization at the presence of sulfosalicylic acid (as dopant). The composites obtained were characterized by Fourier transform infrared spectra (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The thermal stability of the composites was investigated by thermogravimetry (TG) and derivative thermogravimetry (DTG). The electrochemical performance of the composites was investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results of FTIR, XRD, SEM, CV, and EIS show that the structure of composite has changed greatly when rare earth oxide content is >0.7 g (PANI/La2O3[w/w(92.7/7.3)] and PANI/Sm2O3[w/w(96.2/3.8)]) and the PANI in the composite has transformed into pernigraniline base (non-conducting state) from emeraldine base (conducting state). TG-DTG analysis indicates that the thermal stability of composite was higher than pure PANI, which is attributed to the interaction between PANI and rare earth oxide. 相似文献
6.
Yu-Qian Dou Yunpu Zhai Fanwu Zeng Xiao-Xia Liu Bo Tu Dongyuan Zhao 《Journal of colloid and interface science》2010,341(2):353-358
Composite material PANI/KIT-6, with polyaniline (PANI) chains encapsulated in the 3-D interconnected pore channels of mesoporous silica, KIT-6, has been synthesized via a gas-phase method. The composite formation and the presence of PANI inside the pore channels of KIT-6 were evidenced by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), small-angle X-ray scatter (SAXS), transmission electron microscopy (TEM), and N2 adsorption–desorption isotherms. The PANI/KIT-6 composite showed good electrical conductivity (2.4 × 10?3 S/cm) due to the formation of 3-D networks of PANI inside the 3-D interconnected channels of KIT-6. The resistance of PANI/KIT-6 composite at different relative humidities (RH) was investigated. An essentially linear relationship between the relative resistance of the composite and the relative humidity of the environment was found from 11.3% to 97.3% RH. 相似文献
7.
Synthesis,characterization, thermal,electrical and magnetic properties of polyaniline composites with rare earth gadolinium coordination complex
下载免费PDF全文
![点击此处可从《先进技术聚合物》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Novel polyaniline/gadolinium (PANI/Gd) composites were successfully synthesized by “in‐situ” polymerization at the presence of rare earth Gd coordination complex and D‐tartaric acid (an a dopant). It is rarely to find the studies on related field to add rare earth Gd coordination complex as fillers. Fourier transform infrared (FTIR) spectra, X‐ray diffraction (XRD) and scanning electron microscope (SEM) were used to examine the structure and surface appearance characterization of materials. The thermal stability performance of composites was investigated by thermogravimetry and derivative thermogravimetry (TG‐DTG). Electrochemical performance was measured by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and galvanostatic charge–discharge test. The magnetic property was investigated by physical property measurement system (PPMS). The structure and surface appearance characterization and the magnetic properties jointly demonstrate the polymerization of rare earth Gd coordination complex and PANI–D‐tartrate (DTA) not only simple physical mixing but also chemical mixing. TG‐DTG analysis suggests that thermal stability of PANI/Gd composites is higher than that of PANI–DTA. Electrochemical performance tests and SEM indicate that the composite (PANI/Gd = 3.3:1,mass ratio) has the most regular morphology and best specific capacitance. The magnetization of the composite (PANI/Gd = 3.3:1,mass ratio)is evidently smaller compared with PANI–DTA and rare earth Gd coordination complex. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
8.
Wires, plates, flowers, needles, and core-shells: diverse nanostructures of gold using polyaniline templates 总被引:1,自引:0,他引:1
Sajanlal PR Sreeprasad TS Nair AS Pradeep T 《Langmuir : the ACS journal of surfaces and colloids》2008,24(9):4607-4614
A simple and versatile method for the synthesis of a wide range of polyaniline (PANI)-based 1D and 2D gold nanostructures of uniform size distribution with high colloidal stability is demonstrated. All the nanostructures were synthesized from oligoaniline-coated gold nanoparticle precursors. The nanostructures include nanowires of various sizes, nanoplates, and flower-like nanoparticles. These nanowires showed a pH-dependent shape transformation. Needle-like aggregates of Au/PANI were formed as the pH of the nanowire solution changed to 2.5. At higher pH (10.2), nanowires converted into spherical nanoparticles. Core-shell particles of Au/PANI composites have been achieved by the reversal of the pH of the nanowire from 10.2 to 2.9. The morphology of the nanostructures was studied by TEM and SEM. FTIR, UV-vis, XRD, and LDI MS were utilized for the characterization of the chemical composition of the nanostructures. A mechanism for the nanowire growth is proposed. 相似文献
9.
聚苯胺钡铁氧体纳米复合材料的制备、表征及性能 总被引:8,自引:1,他引:7
采用原位掺杂聚合法, 将聚苯胺(PANI)对粒径在60~80 nm的M型钡铁氧体颗粒(BaFe12O19)进行了包覆, 得到了具有棒状结构的复合材料. 通过X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等测试手段对材料的形貌和结构进行了表征. 结果表明, PANI链段与BaFe12O19颗粒之间存在作用力. 使用振动磁强计和四探针法测定了复合材料的磁性能与电性能后发现, 饱和磁化强度与矫顽力均随聚苯胺含量的增加呈规律性下降趋势, 而电导率呈上升趋势. 复合材料的吸收特性测试结果表明, 该材料反射率小于-20 dB时, 带宽可以达到15.07 GHz. 同时详细地讨论了纳米复合材料的聚合机理及相互作用. 相似文献
10.
The present study involves the synthesis of polyaniline (PANI) and its composite with nickel bis(acetylacetonate) complex (Ni(acac)2) via chemical oxidative polymerization method. PANI-Ni(acac)2 composite was characterized by energy dispersive X-rays (EDX), fourier transformer infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscope (SEM) techniques. Luminescence study was performed by UV–visible and fluorescence techniques. Relative fluorescence quantum yield of composite is a few orders of magnitude higher than pure PANI. The high fluorescence quantum yield of composite is probably due to greater chances of exciton formation and subsequent radiative decay to the ground state. Differential scanning calorimetric analysis (DSC) revealed higher thermal stability of composite than pure PANI, thereby allowing its use in devices which run at higher temperatures. On increasing the applied magnetic field, magnetic moment increases in both Ni(acac)2 complex and PANI-Ni(acac)2 composite, unlike to that in pure PANI. Thus, the present study holds promise for thermal purposes, luminescence properties and magnetic applications of the polyaniline composite. 相似文献
11.
Synthesis of polyaniline‐modified mesoporous‐silica containers for anticorrosion coatings via in‐situ polymerization and surface‐protected etching
下载免费PDF全文
![点击此处可从《先进技术聚合物》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Huining Wang Mengyu Gan Li Ma Tao Zhou Huihui Wang Shiyong Wang Wenqin Dai Xiaowu Sun 《先进技术聚合物》2016,27(7):929-937
An efficient type of container for anticorrosion coating based on polyaniline (PANI) modified mesoporous silica (pS) sphere has been first prepared via in‐situ polymerization and surface‐protected etching. The PANI‐modified containers not only show higher concentration of loaded inhibitor than pS, but also protect steel well because of the PANI. The coating with 1H‐benzotriazole (BTA) loaded containers shows significant anticorrosion property because of the release of BTA from containers. The structure and morphology of container are characterized by FTIR, XRD, SEM and TEM. The release of BTA from pS and PANI‐modified containers is determined by UV in water. The possible self‐healing anticorrosion performances are evaluated by EIS and polarization curves which indicate that the coating including BTA‐loaded containers performs best. The strategy of modifying pS by PANI is effective and successful. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
12.
Qi Yanni Zhang Jian Qiu Shujun Sun Lixian Xu Fen Zhu Min Ouyang Liuzhang Sun Dalin 《Journal of Thermal Analysis and Calorimetry》2009,98(2):533-537
Journal of Thermal Analysis and Calorimetry - Polyaniline/NiO (PANI/NiO) composites were synthesized by in situ polymerization at the presence of HCl (as dopant). FTIR, TEM and XRD were... 相似文献
13.
Polyaniline (PANI)/glycidyl ether of bisphenol A (SU-8) composite film is elaborated in order to detect ammonia gas. These composite films are characterized by ultraviolet-visible (UV-vis) spectroscopy, Fourier transformed infrared (FTIR) spectroscopy and scanning electron microscopy (SEM). The sensitivity to ammonia is measured by optical absorption changes. The ammonia sensing properties of PANI/SU-8 composite films are studied, and then are compared to pure PANI films elaborated by chemical way. Experimental results show that the PANI/SU-8 optical sensor has simultaneously a rapid response to ammonia gas and regenerates easily, that is advantageous compared to pure PANI films. 相似文献
14.
Lirong Kong Xiaofeng Lu E Jin Shan Jiang Xiujie Bian Wanjin Zhang Ce Wang 《Journal of solid state chemistry》2009,182(8):2081-2087
Polyaniline (PANI)/Fe3O4 composite hollow spheres have been successfully synthesized in one step using sulfonated polystyrene (PS) spheres as templates. The magnetic PANI hollow spheres were used as supports for noble metal nanoparticles (NPs) such as Au and Pd. The morphology, composition and magnetic properties of the resulting products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, inductively coupled plasma (ICP) atomic spectra and vibrating sample magnetometer. The catalytic activity of magnetic PANI/Au composite shells on the oxidation of dopamine was investigated by cyclic voltammetry. The obtained results provide our product with a practical application for the detection of dopamine. On the other hand, the catalytic activity of magnetic PANI/Pd composite shells on the reduction of 4-nitroaniline was investigated by spectroscopic methods and compared with Pd/C catalyst which was already widely used in industrial production. 相似文献
15.
In this study, a facile method was developed for the preparation of a new conducting polymer composite with core-shell structure. The surfaces of layered titanate (K2Ti4O9) particles were first modified with 3-aminopropyltriethoxysilane, and then a polyaniline/titanate (PANI/K2Ti4O9) composite was synthesized via chemical oxidative polymerization. The resulting composites were characterized by SEM, XRD, FTIR and TG measurements. The results indicated that the PANI deposited on the surface of K2Ti4O9 particles resulted in the formation of the composite with a core-shell structure. TG analysis showed that the composite containing 28.7 wt% PANI had better thermal stability than that of pure PANI. Further, the PANI/K2Ti4O9 composite particles were adopted as a dispersed phase in silicone oil for electrorheological (ER) investigation. Suspension of the composite particles exhibited typical ER behavior subjected to an external electric field under steady and dynamic oscillatory shear. 相似文献
16.
利用紫外光作为辅助条件,在反胶束体系中采用一步双原位法合成了硝酸(HNO3)、对甲基苯磺酸(TSA)和5-磺基水杨酸(SSA)掺杂的银/聚苯胺(Ag/PANI)纳米复合材料.通过对复合材料进行红外光谱(FTIR)、紫外光谱(UV-Vis)、扫描电镜(SEM)、X射线衍射(XRD)和导电性能的测试,研究了不同质子酸对Ag/PANI纳米复合材料结构、形貌和导电性能的影响.测试结果表明,3种酸掺杂制备的Ag/PANI纳米复合材料均为聚苯胺包覆银粒子的核-壳结构.不同的质子酸掺杂会对Ag/PANI纳米复合材料的电性能有重要影响.在3种酸掺杂的复合材料中,TSA掺杂的复合材料的电导率最佳,为215.14 S·cm-1. 相似文献
17.
Dendritic polyaniline (PANI) nanoparticles were synthesized via oxidative polymerization of aniline, using ammoniumperoxodisulfate as an oxidant, and CM-chitin as a template. The reaction was performed under acidic conditions and the template was removed after the polymerization was completed. Molecular characterization (including UV-vis, FTIR, TGA, and XRD) suggests that the structure of the synthesized dendritic PANI nanoparticles is identical to that of the emeraldine form of PANI, synthesized by the conventional route (without the addition of the CM-chitin template). SEM images reveal that the dendritic PANI nanoparticles have an average diameter in the nanometer range, and are globular in shape, with radially oriented PANI dendrites; in contrast, irregularly-shaped aggregates of PANI are obtained using the conventional synthesis. It was further found that the size of the dendritic PANI nanoparticles is dependent on the CM-chitin content. The higher the CM-chitin concentration, the smaller is the size of the dendritic PANI nanoparticles obtained. An interpretation of these observations and a possible formation mechanism are proposed based on self-assembly between the CM-chitin chains and the aniline monomer. 相似文献
18.
以水珠为模板,采用溶剂散逸自组装法制备了表面具有特殊形貌的有序多孔膜. 以此多孔膜为模板制备了聚苯胺/聚氨酯(PANI/PU)的凹透镜阵列. 采用红外光谱(FTIR)和扫描电子显微镜(SEM)对界面聚合得到的PANI/PU纳米复合物的结构和凹透镜阵列的形貌进行了表征,研究了不同合成条件对纳米复合物导电性能的影响,并对PANI/PU凹透镜阵列的电学和光学性能进行了研究. 结果表明,PANI/PU凹透镜阵列同时具有导电性、电致收缩性和光衍射性质;其收缩率与外加电压成反比,而透光率与收缩率成正比. 相似文献
19.
Novel electrically conducting and biocompatible composite hydrogel materials comprising of poly (aniline) (PANI) nanoparticles dispersed in a poly (vinyl alcohol) (PVA) – g–poly (acrylic acid) (PAA) matrix were prepared by in situ polymerization of aniline. The prepared ionic hydrogels were evaluated for their water uptake capacity in distilled water. While structural insights into the synthesized polymer was sought by Fourier Transform Infrared (FTIR) spectroscopy and X–Ray Diffraction (XRD) techniques, morphology and dimension of PANI particles embedded into the colored optically semi–transparent polymer films were evaluated by Scanning Electron Microscopy (SEM) analysis and Transmittance Electron Microscopy (TEM) while thermal behavior of composite hydrogel was investigated by Differential Scanning Calorimetry (DSC). Electrical conductivity of composite hydrogels containing different PANI percentage was determined by LCR. Considering the potential of electrically conductive nanocomposites materials in biomedical applications the in vitro blood compatibility of nanocomposites was investigated by employing several in vitro tests. 相似文献
20.
合成聚苯胺/碳化钨复合材料及聚合机理探讨 总被引:1,自引:0,他引:1
采用在原位聚合苯胺的反应介质中分散碳化钨(WC)的方法制备了掺杂聚苯胺/碳化钨(PANI/WC)复合物,并研究了苯胺在WC表面的聚合机理.通过扫描电镜(SEM)、透射电镜(TEM)、傅立叶红外光谱(FTIR)、拉曼光谱(Raman)和X射线衍射(XRD)对复合物进行了表征.结果表明,苯胺的聚合倾向于在WC颗粒表面进行,形成了PANI包覆WC的复合材料;WC粒子与PANI大分子之间存在强的相互作用,并且复合前后WC的晶型并未发生变化,WC的存在导致红外光谱有明显的蓝移现象,复合后在3446 cm-1处的红外吸收峰变得很弱;在拉曼光谱中,代表醌环C N键的伸缩振动峰红移了9 cm-1,并且强度也有很大程度提高.说明PANI与WC之间有化学键的作用,它们之间的化学键作用发生在C N键的N原子上.聚合反应优先在WC粒子表面进行,生成PANI包覆结构,并提出了PANI/WC复合物的形成机制. 相似文献