Thermal, UV and FTIR spectral studies in alkali metal cinnamates

A single crystal of sodium and potassium cinnamates was grown by slow evaporation of methanol solution at room temperature. The effect of metals sodium and potassium on the electronic structure of cinnamic acid was studied. In this research many analytical methods such as FTIR, UV, second harmonic generation (SHG) and TG–DTA were used: The spectroscopic studies lead to conclusions containing the distribution of the electronic charge in molecule, the delocalisation of π electrons and the reactivity of metal complexes. The SHG efficiency is more pronounced in the presence of sodium and potassium dopant in the growth medium. Incorporation of sodium and potassium increase the thermal stability ensuring the suitability of material for possible non-linear optical (NLO) application up to 180 °C.     

Binary Systems of Nifedipine And Various Cyclodextrins in The Solid State. Thermal,FTIR, XRD studies

Nifedipine complexes with β-cyclodextrin (β-CD), γ-cyclodextrin (γ-CD), 2-hydroxypropyl-β-cyclodextrin (2HP-β-CD), randomly methylated-β-cyclodextrin (RM-β-CD) and heptakis(2,6-O-dimethyl)-β-cyclodextrin (DM-β-CD) have been prepared by both kneading and heating methods and their behaviour studied by differential scanning calorimetry (DSC), diffuse reflectance mid-infrared spectroscopy (FTIR) and X-ray diffractometry (XRD). DSC revealed the nifedipine melting endotherm with onset at approximately 171°C for the kneaded mixtures with β-CD, γ-CD and 2HP-β-CD, thus confirming the presence of nifedipine in the crystalline state, while some decrease in crystallinity was observed in the DM-β-CD kneaded mixture. With RM-β-CD, however, broadening and shifting of the nifedipine endotherm and reduction in its intensity suggested that the kneading could have produced an amorphous inclusion complex. These differing extents of interaction of nifedipine with the cyclodextrins were confirmed by FTIR and XRD studies. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermal,FTIR and XRD study on some 1:1 molecular compounds of theophylline

Thermal stability and structural features of three newly synthesized 1:1 lattice compounds of theophylline (th) with ethylenediamine carbamate (enCO₂), 1,10-phenanthroline (phen), and 5-sulfosalicylic acid (sa-5-SO₃H) have been studied in comparison with those of the theophylline compounds with ethanolamine (ea) and salicylic acid (sa). Simultaneous TG-DTA measurements, FTIR spectroscopy and X-ray diffraction have been carried out to get information on the various structural units of these solid inclusions, especially on the actual form (molecule, anion or cation) of theophylline moieties built in. Theophyllinate and theophyllinium ions have been found in the ethanolammonium-theophyllinate (1:1) (1, eaH⁺th^-) and the theophyllinium salicylic acid 5-sulfonate monohydrate (1:1:1), (5, thH⁺saSO_–³H₂O), respectively. Whilst the 1:1 complexes with 1,10-phenanthroline (2, thphen), ethylenediamine carbamate (3, thenCO₂), and salicylic acid (4, thsa) contain neutral theophylline moieties associated with H-bonds. In compound (3) the zwitterion of N-(2-ammonium-ethyl)carbamate (NH₃⁺-CH₂-CH₂-NH-CO_-²) is present.This revised version was published online in November 2005 with corrections to the Cover Date.     

Thermal,FTIR and microhardness studies of bisthiourea-urea single crystal

Single crystals of a new nonlinear optical material, bisthiourea-urea have been grown from aqueous solution by slow evaporation technique with a period of 4 weeks. The structure of the grown crystals was confirmed by X-ray diffraction (XRD). The presence of title compound in the crystal lattice has been qualitatively determined by FTIR analysis. The mechanical properties and thermal stability of the grown crystals were evaluated by Vickers microhardness test and TG and DTG, respectively.     

Thermal,spectroscopic and XRD studies on nitroaminoguanidine (NAG)

Nitroaminoguanidine (NAG) has been investigated as regards its thermal decomposition characteristics using simultaneous thermal analysis, infrared spectroscopy, X-ray diffraction and polarising microscopy. XRD studies show thatNAG crystal belongs to the tetragonal system. The crystal structure parameters are found to be:a=17.063±0.005Å,b=17.063±0.005Å,c=5.155±0.005Å andc/a axial ratio=0.302. Under non-isothermal conditions,NAG decomposed apparently in one stage with a loss in weight of 80%. But the thermal decomposition ofNAG in the solid phase under isothermal conditions proceeded through three stages. Both the first and the second stages obeyed theA-E (Avrami Erofee'v) equation forn=1. The 3rd stage is too slow and kinetics has not been attempted. The rate parameters for the first and second stages have been evaluated. Gaseous decomposition products detected using the IR gas cell are NH₃, NO₂, HCN, N₂O, CO and CO₂. High temperature IR studies indicate preferential deamination reaction initially indicating breaking of N?NH₂ and C?NH₂ bonds leading to NH₂ radical formation. Addition of diphenylamine, a known chain inhibitor, decelerated the thermal decomposition, supporting a radical chain reaction.     

Biogenic iron compounds: XRD, Mossbauer and FTIR study

Materials based on biogenic iron oxides, which are a product of the metabolic activities of the neutrophilic iron-oxidizing bacteria (NIOB) from Sphaerotilus-Leptothrix group, were investigated. Natural microbial probes were collected from freshwater flow from Vitosha Mountain (Bulgaria) and cultivated under laboratory conditions in respect to select suitable cultures and conditions (nutrition media) for biomaterial accumulation of biogenic oxides. Samples were studied by physicochemical methods: X-ray diffraction, Mossbauer spectroscopy and IR spectroscopy. Their phase composition and physicochemical properties were obtained. Presence of both amorphous and crystal phase (ultra- and highly dispersed particles) was proved. Iron-containing compound in the natural biomass consists of α-FeOOH. The cultivated materials have more complex composition with iron-containing ingredients as α-FeOOH, Γ-FeOOH, Γ-Fe₂O₃ and Fe₃O₄. The sample of natural biomass was tested in reaction of CO oxidation and it showed potential to be used as catalyst support.      

Formation of protein-birnessite complex: XRD, FTIR, and AFM analysis

Limited information is available on formation chemistry of enzyme-Mn oxide complexes. Adsorption isotherm of protein molecules (tyrosinase) on birnessite (delta-MnO(2)) at pH 6.0 and room temperature (23 degrees C) was of H type, indicating a very high affinity of the enzyme protein molecules to the birnessite mineral surfaces. After thorough washing of the protein-mineral complex with deionized-distilled water, up to 89% of adsorbed protein molecules remained bound to the mineral surfaces. When a high amount of the protein was immobilized, the X-ray diffractogram shows a significant decrease in the intensity of characteristic d-spacings of birnessite. No shift to higher values of the d-spacings of protein-birnessite complex was observed, indicating that the enzyme molecules were not intercalated in the mineral structure but immobilized at the external surfaces and the edges of the mineral oxide. By comparison to the free enzyme, infrared absorption spectra of the protein-birnessite complexes show a shift by up to 11 cm(-1) to lower frequencies in the absorption bands characteristic of amide I and II modes of the polypeptides chains. The mineral surfaces exerted some strain on the protein structure, resulting in an alteration of the protein molecular conformation after binding to the mineral colloid surfaces. In the free state, the globular protein molecules had a spheroid shape with an average cross-sectional diameter of 70+/-6 nm. The unfolding and flattening of the protein molecules after immobilization is clearly shown in atomic force micrographs. Compared to the tyrosinase-birnessite complex, similar FTIR spectra and atomic force micrographs were observed for the pure protein, bovine serum albumin (BSA), after immobilization on birnessite. The information obtained in this study is of fundamental significance for understanding birnessite as an adsorbent of biopolymers and the catalytic role of the enzyme-birnessite complex.     

Studies of kidney stones using INAA,EDXRF and XRD techniques

Four kidney stones collected from patients being treated in the Advance Urology Centre of PGIMR, Chandigarh were characterized using instrumental neutron activation analysis (INAA), energy dispersive X-ray fluorescence (EDXRF) and X-ray diffraction (XRD) techniques. For INAA, samples were irradiated in tray rod facility of Dhruva reactor, Mumbai and pneumatic fast transfer system of KAMINI reactor, IGCAR, Kalpakkam. Radioactive assay was carried out using HPGe detector coupled to 8k channel analyzer. Elements determined in the samples by INAA are Zn, Sr, Co, Fe, Cr, Sc, Se, Na and Mn. EDXRF was used for the quantification of Ca. XRD patterns showed that three of the kidney stones are calcium oxalate stone and the other one is uric acid stone. The concentrations of trace elements in general were found to be higher in calcium oxalate stones and positive correlation was observed in the concentrations of Ca with Sr and Zn.     

FTIR spectroscopic, thermal and XRD characterization of hydroxyapatite from new natural sources

The inorganic constituents of 5 different plants (leaves and stalks) were investigated by using Fourier transformer infrared spectroscopy (FTIR), X-ray diffraction (XRD) and thermal analysis including thermal gravimetric analysis (TGA), derivative thermogravimetry (DTG) and differential scanning calorimetry (DSC). These plants are Catha edulis (Khat), basil, mint, green tea and trifolium. The absorption bands of carbonate ions CO(3)(2-) was exhibited at 1446 cm(-1), and the phosphate ions PO(4)(3-) was assigned at 1105 and 1035 cm(-1). At high temperatures (600, 700 and 600°C) further absorption bands of the phosphate ions PO(4)(3-) was assigned at the frequencies 572, 617, 962, 1043 and 1110 cm(-1) and the vibrational absorption band of the carbonate ions CO(3)(2-) was assigned at 871, 1416 and 1461 cm(-1). X-ray diffraction and thermal analysis confirm the obtained results of FITR. Results showed that the main inorganic constituents of C. edulis and basil leaves are hydroxyapatite whereas the hydroxyapatite content in the other plant samples is less than that in case of C. edulis and basil plant leaves.     

Thermal,Magnetic, FTIR and XRD Study of New Co(II) and Ni(II) Theophyllinato Complexes with Benzylamine or Ethanolamine

Four new theophyllinato (th) complexes of Co(II) and Ni(II) were synthesized containing ethanolamine (2-aminoethanol, ea) or benzylamine (ba). Comprehensive FTIR spectroscopic, powder XRD, magnetic and thermal studies on these mixed ligand complexes have been carried out to get structural information. The almost identical FTIR spectra and XRD patterns of Co and Ni compounds with same composition have indicated that Co(th)2(ba)2·2H2O (1) and Ni(th)2(ba)2·2H2O (2) or Co(th)2(ea)2 (3) and Ni(th)2(ea)2 (4) have very similar structure pair wise. The infrared spectra and X-ray diffraction patterns of thermally dehydrated 1 and 2containing benzylamine have allowed only to suggest that the co-ordination number around the metal centres is four, while the high thermal stability of complexes 3and 4have indicated that they contain two of bidentate ethanolamine molecules in octahedral co-ordination. A big difference observed between the magnetic moments of Co compounds 1and 3have proven that the inner co-ordination sphere of complexes with benzylamine (1and 2) is tetrahedral, whilst that with ethanolamine (3and 4) is basically octahedral, independent of the cation centres (Co or Ni). This revised version was published online in July 2006 with corrections to the Cover Date.     

Analysis of renal stones by FTIR spectroscopy

A study of the chemical composition of renal stones is important for understanding their etiology. And the therapy for the stone disease is usually based on the analysis of calculi, permitting a porper management of the disease and the prevention of its recurrence. FTIR spectroscopy has been used for urinary stones analysis. The routine, easy and rapid measurements give unambiguous information about the stone composition. Especially a precise wavelength scale of the Fourier method is helpful here. A relatively good spatial resolution is important as very often the stones are composed of core and various layers of different chemical composition. A quantitative determination of the proportion of various materials in calculi is also possible.     

Thermal and FTIR spectral studies of various proportions of zinc magnesium ammonium sulfate

Mixed crystals of various proportions of zinc magnesium ammonium sulfate were grown by slow evaporation of aqueous solution at room temperature. The bright and transparent crystals obtained were characterized through thermal (TG–DTA) and FTIR spectral analyses. A fitting decomposition pattern for the compound was formulated on the TG curve which shows two stage mass losses between 133 and 478.75 °C. DTA curve shows exothermic peaks in this temperature range supporting the formulated decomposition pattern. The FTIR spectra show the vibration frequencies due to the formation of zinc magnesium ammonium sulfate mixed crystals. Detailed structural analysis of the compound is under progress.     

Thermal and XRD analysis of Egyptian galena

Galena is the principal ore mineral for lead industry and the production of lead and its alloys. The industrial processing of galena includes its oxidized roasting to lead oxide, followed by reduction smelting of lead oxide agglomerate with coke in the blast furnace to commercial lead. The present work reports a thermal analysis study of oxidized roasting of Egyptian galena using a derivatograph. The reaction products were identified microscopically and by using a Siemens Crystalloflex diffractometer.     

Thermal,XRD and spectrophotometric study on artificially degraded woods

Thermogravimetry, differential thermal analysis, differential scanning calorimetry in oxygen flux were used to characterize two wood types: fir and chestnut woods. They were characterized by the peak temperatures of DTA, DTG and DSC curves and by the different mass losses evaluated on the basis of the measured thermal data. The samples were woods in powder obtained during sawing. Complementary characterization of the woods was performed by estimating the crystallinity of cellulose by means of X-ray powder diffraction. In order to simulate the degradation of wet woods, fir and chestnut woods were put into deionised water and into artificial sea water for several weeks; some samples of woods contained Cu and Fe nails to ascertain the effect of these metals on the degradation process. The thermal and X-ray diffraction measurements were then performed on the wet woods, following the same previous procedure. X-ray fluorescence was used to investigate the penetration of metals into wood samples.     

Thermal and FTIR spectral studies in various proportions of urea thiourea mixed crystal

Mixed crystals of various proportions of urea thiourea were grown by slow evaporation of aqueous solution at room temperature. The bright and transparent crystals obtained were characterized using thermogravimetry–differential thermal analysis (TG–DTA) and FTIR spectroscopic analyses. A fitting decomposition pattern for the title compound was formulated on the TG curve which shows a two-stage mass loss between 175 and 750 °C. In this temperature range, DTA curves show exothermic peaks supporting the formulated decomposition pattern. The FTIR spectra show the characteristic absorption, vibration frequencies due to urea thiourea. Detailed structural analysis of the compound is under progress.     

FTIR, XRD, and DSC analysis of the rosemary extract effect on polyethylene structure and biodegradability

The purpose of this research study was evaluation of the utility of two common multivariate techniques, agglomerative cluster analysis (CA) and principal component analysis (PCA), as supplementary means of detecting incompatibilities, which can occur between active pharmaceutical ingredients and excipients at the preformulation stage of a solid dosage form. For the detection of incompatibilities between atenolol (beta blocker) and selected excipients (mannitol, lactose, starch, methylcellulose, β-cyclodextrin, meglumine, chitosan, polyvinylpyrrolidone and magnesium stearate), the thermogravimetry (TG), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) were chosen. The results have shown that compatibility between atenolol and an excipient can be identified in a CA dendrogram by two large clusters, from which one groups an excipient and physical mixtures with a high concentration of the excipient. Another cluster encompasses atenolol and mixtures with a high content of the drug. In the PCA plot, all samples are located along the first principal component axis (PC1), beginning from a single component located with the most negative PC1 value, through mixtures with gradually varying concentration of both ingredients, till the second component located close to the most positive PC1 values. The results have shown that CA and PCA fulfil their role as supporting techniques in the interpretation of the data acquired from the TG curves, and the obtained data are compatible with the results of DSC and FTIR analyses.     

Study of prehispanic wall paintings from Xochicalco, Mexico, using PIXE, XRD, SEM and FTIR

The characterization of samples of painted plasters obtained from the archaeological site of Xochicalco, in Central Mexico, is presented. Elemental concentrations of the painted layers were obtained by using proton induced X-ray emission (PIXE). The main crystalline structures of the samples are identified with the help of X-ray diffraction (XRD), while the microstructure is studied by scanning electron microscopy (SEM). The information resulting from the application of these three techniques is used to achieve more accurate values for the elemental concentrations. Additional data regarding organic components of the paintings was obtained through Fourier transform infrared spectrometry (FTIR). Although the latter results only provided reliable data on inorganic components, they help to clarify the results from XRD and confirm those of SEM.     

Mineral and microelement compositions of urinary stones

The mineral and microelement compositions of urinary stones from patients in various districts of the Novosibirsk region are analyzed. The mineral composition is determined using X-ray powder diffraction and vibrational spectroscopy. The microelement composition is identified using synchrotron radiation X-ray fluorescence analysis. Calcium oxalates (whewellite CaC₂O₄ · H₂O and weddellite CaC₂O₄ · 2H₂O) are the most frequent components of the urinary stones. Oxalate uroliths contain a variety of microelements in significant amounts. Phosphate uroliths, represented by hydroxylapatite Ca₅(PO₄)₃(OH) and struvite MgNH₄PO₄ · 6H₂O, account for about one-fifth of the collection. Apatite urinary stones contain maximal strontium amounts. The struvite uroliths have higher rubidium levels. Uric acid uroliths (C₅H₄N₄O₃) account for about 11% of the collection. Their strontium concentrations are minimal. The element composition of the urinary stones is a function of their mineral constituents, the environmental surroundings, and the metabolism specifics of the patient.     

Thermoanalytical,FTIR and X-ray studies of gemfibrozil-cyclodextrin complexes

Summary Inclusion complexation between dimethyl-β-cyclodextrin and a very poorly water-soluble serum lipid-regulating agent, gemfibrozil, was studied. Products were prepared by several methods (physical mixing, kneading, spray-drying and ultrasonic treatment) in four different molecular ratios (2:1, 1:1, 1:2 and 1:3). The possibility of complex formation between the drug and the host molecule was studied by thermal analysis. Supplementary techniques, such as Fourier transformation-infrared spectroscopy and X-ray diffractometry, were also applied to interpret the results of thermal study of the products.