Rational Construction of Polymeric Cadmium(II) Benzimidazole for Transition Metal Ion Exchange

A 1D double‐helical coordination polymer {[Cd(pbbm)₂]₂(ClO₄)₄(H₂O)₂}_n ( 1 ) was successfully constructed by the reaction of Cd(ClO₄)₂ · 6H₂O with 1,1′‐(1,5‐pentanediyl)bis‐1H‐benzimidazole (pbbm). Interestingly, polymer 1 exhibits highly selective capacity for the ionic exchange of Zn²⁺ and Cu²⁺ over Co²⁺ and Ni²⁺ ions in the crystalline solid state when the crystals of 1 are immersed in the aqueous solutions of the perchlorate salts of Cu²⁺, Zn²⁺, Co²⁺, and Ni²⁺ ions, respectively, which indicates that central Cd^II ion exchange might be considered as being dominated by the coordination ability of metal ions to free functional groups, ionic radii of exchanged metal ions, and the solution concentration of adsorbed metal salts. The parent material‐ and ion‐exchange‐induced products are identified by FT‐IR spectroscopy, PXRD patterns as well as SEM and EDS measurements. In addition, the thermal stability of 1 was also investigated.     

Synthesis and characterization of 2, 4-dihydroxy-benzaldehydeoxime-formaldehyde polymers and their application as ion-exchangers

Polymers were prepared by the condensation of 2, 4-dihydroxybenzaldehydeoxime (2, 4-DBO) and formaldehyde (F) in the presence of oxalic acid as catalyst with varying molar ratios of reacting monomers. Polymers were characterized by their IR spectra, elemental analyses, TGA and M_n as determined by vapour pressure osmometry as well as by non-aqueous conductometric titrations. Viscosity measurements of the solutions of polymer samples were carried out in dimethylformamide. Chelation ion-exchange properties have also been studied employing the batch equilibration method. This method involved the measurement of distribution of a given metal between the polymer sample and a solution containing metal ions. The study was carried out over a wide pH range and in media of various ionic strengths. The polymer showed a higher selectivity for UO ₂ ²⁺ and Fe³⁺ ions than for Cu²⁺, Ni²⁺, Co²⁺ and Mn²⁺ ions.     

Kinetic analysis of the disproportionation of aqueous glyoxal

Rates of disproportionation of 0.015–0.4 mM aqueous glyoxal toglycolic acid were measured at 0.24–75 mM NaOH and constant ionic strength, leading to the empirical rate expression r = (a₁[OH^?] + a₂[OH^?]²) [G_T]/(1 + a₃[OH^?]), where [G_T] is the total glyoxal concentration. These results were confirmed in bicarbonate/carbonate buffer and at 2–20 mM [G_T]. The rate form is in contradiction to earlier work on glyoxal, which suggested a second-order dependence on [OH^?], but agrees with the rate equation for phenylglyoxal disproportionation. The kinetic data can be explained by a mechanism postulating the presence of monohydrated and dihydrated forms of glyoxal in equilibrium, with the rate-limiting steps being intramolecular hydride ion transfers to the unhydrated carbonyl carbon of the mono- and divalent anions of glyoxal monohydrate.     

Uptake of Divalent Metal Ions (Cu2+, Zn2+ and Cd2+) by Polysiloxane Immobilized Glycinate Ligand System

ABSTRACT

Porous solid siloxane polymer carrying glycinate functional group of formula –(CH₂)₃NHCH₂COOH has been prepared by the sol-gel process. Treatment of aqueous solutions of divalent metal ions with the polysiloxane glycinate ligand system demonstrates that this material exhibits high potential for preconcentration of metal ions (Cu²⁺, Zn²⁺ and Cd²⁺). The ligand system chemisorbs these divalent metal ions, at optimum conditions, in the order: Cd²⁺ < Zn²⁺ < Cu²⁺. The uptake of copper ions is concentration dependent but it is independent on the presence of other competing ions. Treatment of the glycinate ligand system with acidic solution results in leaching of bound ligands. The highest leaching occurs in presence of copper ions at low pH     

Ozonocatalytic decomposition of glyoxal and glyoxylic and formic acids in the presence of iron(III) ions

Rate constants of reactions of ozone with glyoxal, glyoxylic and formic acid in aqueous solutions at pH 1.5 were determined. It was shown that iron(III) in the form of ions accelerates oxidation of glyoxal and glyoxylic acid, but does not influence reaction between ozone and formic acid. It was established that the catalyst acts effectively if its concentration is comparable to the concentration of the oxidized substrate, the optimal stoichiometric ratio (Fe³⁺/substrate) being close to 1/3. The catalytic reaction mechanism was studied using a competitive chelate ligand, oxalic acid. We concluded that the catalytic activity of iron(III) in the investigated reaction was due to its ability to form chelate complexes in which the substrate was more easily oxidized by molecular ozone.     

A DFT Study on the Selective Extraction of Metallic Ions by 12-Crown-4

In order to predict the extraction ability of 12-crown-4 for different metallic ions, the complexes [M(12-crown-4)] and [M(H₂O)₄] (where M=Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, Ca²⁺, Cu²⁺ and Zn²⁺) were investigated by the density functional theory without restrictions for their geometry. The metal binding capability was evaluated using the binding energy, and the effect of nature of the metal on the binding properties was also studied. The results of the calculations showed that the coordination ability of a donor molecule towards different metal ions increased in proportion to their ionization potential. In addition, based on the extraction distribution coefficient, we found that 12-crown-4 can selectively extract Cu²⁺ and Be²⁺ ions from aqueous solutions of mixed cations. Obviously, the stability of complexes and the extraction power of extractants depend greatly on the nature of the metal ions. Calculation results from our study could be used to predict the extraction power of this crown ether and could play a guiding role in planning experiments.     

Preparation,characterization and ion adsorption properties of functionalized polystyrene modified with 1,4-phenylene diisocyanate and diethylenetriamine

In the present work, linear polystyrene (PS) was functionalized by a sulfonation reaction providing sulfonated polystyrene (PSS). Then, the PSS polymer chains were cross-linked with the 1,4-phenylene diisocyanate (PPDI) group in tetrahydrofuran (THF), which led to a PSS-PPDI polymer. The PSS-PPDI was grafted by diethylenetriamine (DETA) in a solution of THF to obtain polymer PSS-PPDI-DETA. Their structures were characterized by infrared spectroscopy (ATR-FTIR), elemental analysis (EA), differential scanning calorimetry (DSC), thermogravemetric (TGA), thermodynamic (DTA) and differential thermogravimetric (DTG) analysis. Subsequently, the obtained polymers were tested for their ability to remove some metal ions from aqueous media such as Zn²⁺, Cd²⁺ and Co²⁺.     

Hierarchically Mesoporous o‐Hydroxyazobenzene Polymers: Synthesis and Their Applications in CO2 Capture and Conversion

The synthesis of hierarchically mesoporous polymers with multiple functionalities is challenging. Herein we reported a template‐free strategy for synthesis of phenolic azo‐polymers with hierarchical porous structures based on diazo‐coupling reaction in aqueous solution under mild conditions. The resultant polymers have surface areas up to 593 m² g^?1 with the mesopore ratio of >80 %, and a good ability to complex with metal ions, such as Cu²⁺, Zn²⁺,Ni²⁺, achieving a metal loading up to 26.24 wt %. Moreover, the polymers complexed with Zn showed excellent performance for catalyzing the reaction of CO₂ with epoxide, affording a TOF of 2570 h^?1 in the presence of tetrabutyl ammonium bromide (7.2 mol %). The polymer complexed with Cu could catalyze the oxidation of alcohol with high efficiency.     

BODIPY Immobilized MCM-41 Based Multianalyte Sensor: Application in Detection and Removal of Trivalent (Al3+, Cr3+) and Divalent (Cu2+, Hg2+) Metal Ions in Aqueous Media

In the present study, a novel p-phenylcarboxylic acid BODIPY ( L ) immobilized MCM-41 based solid chemosensor material L-propylsilyl@MCM-41 ( MS4 ) was developed to detect multiple metal ions in a pure aqueous medium. The synthesized solid chemosensor material MS4 shows high sensitivity and removal ability towards trivalent (Al³⁺, Cr³⁺) and divalent (Cu²⁺, Hg²⁺) metal ions. The emission intensity of MS4 enhanced multifold selectively in the presence of trivalent (Al³⁺, Cr³⁺) metal ions and shows quenching in the presence of divalent (Cu²⁺, Hg²⁺) metal ions. The limit of detection was calculated to be in the nanomolar range with Al³⁺, Cr³⁺, Cu²⁺_, and Hg²⁺ metal ions in the aqueous medium. The spectroscopic and analytical results suggest that MS4 selectively binds with Al³⁺ and Cr³⁺ through −NH functionality and with Hg²⁺ and Cu²⁺ through −COOH functionality of p-phenylcarboxylic acid BODIPY ( L ). Further, MS4 selectively removes Al³⁺, Cr³⁺, Cu²⁺, and Hg²⁺ metal ions from the aqueous media with removal efficiency of 97.28 %, 96.34 %, 87.19 %, and 95.63 %, respectively. No noticeable change in the concentration was observed for other metal ions. The recycling potential of MS4 was evaluated using EDTA for up to seven cycles with no significant reduction in sensing capability.     

Sorption of plutonium from low level liquid waste using nano MnO2

Nano-crystalline MnO₂ has been synthesized by the method of alcoholic hydrolysis of KMnO₄ and its potential as a sorbent for plutonium present in the low level liquid waste (LLW) solutions was investigated. The kinetic studies on the sorption of Pu by MnO₂ reveal the attainment of equilibrium sorption in 15 h, however 90 % of sorption could be achieved within an hour. In the studies on optimization of the solution conditions for sorption, it was observed that the sorption increases with the pH of the aqueous solution, attains the maximum value of 100 % at pH = 3 and remains constant thereafter. The sorption was found to be nearly independent of the ionic strength (0.01–1.0 M) of the aqueous solutions maintained using NaClO₄, indicating the inner sphere complexation between the Pu⁴⁺ ions and the surface sites on MnO₂. Interference studies with different fission products, viz., Cs⁺, Sr²⁺ and Nd³⁺, revealed decrease in the percentage sorption with increasing pH of the suspension indicating the competition between the metal ions. However, at the metal ion concentrations prevalent in the low level liquid waste solutions, the decrease in the Pu sorption was only marginally decreased to 90 % at pH = 3, the decrease being more in the case of Nd³⁺ than that in the case of Cs⁺. This study, therefore, shows nano-crystalline MnO₂ can be used as a sorbent for separation of Pu from LLW solutions.     

Task-specific ionic liquid trioctylmethylammonium salicylate as extraction solvent for transition metal ions

A quaternary ammonium-based room temperature ionic liquid trioctylmethylammonium salicylate (TOMAS) has been studied as an extractant of transition metal ions (Fe³⁺, Cu²⁺, Ni²⁺, Mn²⁺) in aqueous solutions. The effect of pH value on the recovery of metal ions has been investigated. The mechanism of extraction into the ionic liquid has been proposed. The possibility of stripping voltammetric determination of transition metals in aqueous solutions using TOMAS-modified electrodes has been demonstrated.     

A new quinoline-based chemosensor in ratiometric sensing of Hg2+ ions

A new quinoline-based chemosensor 1 has been designed and synthesised. Its metal ion-binding properties have been documented in organic and aqueous organic solvents. While chemosensor 1 recognises Hg²⁺ ions (K _a = 2.15 × 10⁴ M^? 1) by exhibiting ratiometric change in emission in CHCl₃/CH₃OH (1:1, v/v), under similar condition both Zn²⁺ and Cd²⁺ ions are sensed by significant non-ratiometric increase in emission with measurable red shift. In DMSO/H₂O (5:95, v/v), the sensor 1 exhibits a greater selectivity towards Hg²⁺ ions (K _a = 9.20 × 10³ M^? 1) over the other metal ions examined.     

Liquid-liquid partition of cobalt between trilaurylamine N-oxide and aqueous thiocyanate solutions

In an attempt to gain an understanding of factors affecting the extraction of cobalt by trilaurylamine oxide, the equilibria between HX+SCN^– (where X=NO ₃ ^– , Cl^–, SO ₄ ^2– ) and benzene solutions of trilaurylamine oxide have been studied. Cobalt is quantitatively extracted by the oxide from aqueous 0.01–1M KSCN in 0.01M concentration of the acids. The extraction mechanism and the possible compositions of the extracted species are discussed. The effect of several anions on the extraction of the element from optimal aqueous solutions are reported and separation factors for a number of metal ions are given. The solvent has a potential for the group preconcentration of toxic metal ions from dilute aqueous solutions.     

Competitive heavy metal removal by poly(2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid‐co‐itaconic acid)

The competitive removal of Pb²⁺, Cu²⁺, and Cd²⁺ ions from aqueous solutions by the copolymer of 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid (AMPS) and itaconic acid (IA), P(AMPS‐co‐IA), was investigated. Homopolymer of AMPS (PAMPS) was also used to remove these ions from their aqueous solution. In the preparation of AMPS–IA copolymer, the molar percentages of AMPS and IA were 80 and 20, respectively. In order to observe the changes in the structures of polymers due to metal adsorption, FTIR spectra by attenuated total reflectancetechnique and scanning electron microscopy (SEM) pictures of the polymers were taken both before and after adsorption experiments. Total metal ion removal capacities of PAMPS and P(AMPS‐co‐IA) were 1.685 and 1.722 mmol Me²⁺/g_polymer, respectively. Experimental data were evaluated to determine the kinetic characteristics of the adsorption process. Competitive adsorption of Pb²⁺, Cu²⁺, and Cd²⁺ ions onto both PAMPS and P(AMPS‐co‐IA) was found to fit pseudo‐second‐order type kinetics. In addition, the removal orders in the competitive adsorption of these metal ions onto PAMPS and P(AMPS‐co‐IA) were found to be Cd²⁺ > Pb²⁺ > Cu²⁺ and Pb²⁺ > Cd²⁺ > Cu²⁺, respectively. Copyright © 2008 John Wiley & Sons, Ltd.     

Structural and Chemical Features of Extraction with Crown Ethers

Unlike linear extracting agents, in the extraction of metal salts from aqueous solutions of inorganic acids with crown ethers, the inclusion compounds, whose composition depends on several external and internal factors, go to the organic phase. The study of the molecular structure of the formed complexes by X-ray diffraction analysis showed that adducts of crown ethers with inorganic acids are host–guest complexes in which the hydroxonium ion is in the polyether macrocycle cavity. When the aqueous phase contains metal ions capable of displacing the hydroxonium ions from the macrocycle (K⁺, Pb²⁺, Hg²⁺, Sr²⁺, NH₄ ⁺), complexes containing metal cations as the guest in the macrocycle cavity, according to X-ray diffraction data, go to the organic phase. In addition, metals forming ionic associates (AuCl₄ ^-, FeCl₄ ^-, GaCl₄ ^-) in an aqueous solution are extracted with crown ethers in accordance with the anion-exchange mechanism. A system in which traces of metals in the 2 M HNO₃ +5 M HCl mixture serve as the aqueous phase was proposed for estimation of the general extraction ability of crown ethers. Such a system can be used for metal extraction via any possible mechanism. The stereochemical peculiarities of the extraction ability of crown ethers (compared to linear molecules) can be used for selective extraction and separation of metals.     

Binding heavy metal ions with polymerized onion skin

Red onion skin is highly effective for binding heavy metal ions from aqueous solutions. Color leaching can be prevented and the physical characteristics of the substrate can be improved by treatment with formaldehyde in an acidic medium. Batch and column experiments have been conducted with Cu²⁺, Cd²⁺, Zn²⁺, Ni²⁺, Hg²⁺, and Pb²⁺. Almost quantitative removal of the metal ions from solution can be achieved by using columns of the treated onion skin. Competition of the various metal ions for the substrate has been investigated. The capacity of the substrate in the majority of the metal ions studied is well above 1 meq/g. The use of polymerized onion skin to remove heavy metal ions from domestic and industrial wastewater to safe levels has been recommended as a cheap and effective alternative for commercial ion-exchange resins.     

Preparation of guanidinylated carboxymethyl chitosan and its application in the diffusive gradients in thin films (DGT) technique for measuring labile trace metals in water

ABSTRACT

Guanidinylated carboxymethyl chitosan (GCMCS) was prepared via the guanidinylation of carboxymethyl chitosan (CMCS). A device employing the diffusive gradients for thin films (DGT) technique was made using a GCMCS aqueous solution as the binding agent and a cellulose acetate dialysis membrane (CADM) as the diffusion phase to measure labile Cu²⁺, Pb²⁺ and Cd²⁺ in water. The percentage uptake (U%) values of labile Cu²⁺, Pb²⁺ and Cd²⁺ in a synthetic water sample were almost consistent with the theoretical values at 101.6 ± 2.8%, 104.6 ± 6.1% and 95.9 ± 4.4%, respectively. The optimum pH ranges for the measurement of labile Cu²⁺, Pb²⁺ and Cd²⁺ were 3.0–7.0, 3.0–7.0 and 4.0–8.0, respectively. The ionic strength mainly affected the diffusion of metal ions in the CADM. The diffusion rates decreased with increasing concentrations of NaNO₃ solutions. The application of GCMCS-DGT in natural water and industrial wastewater showed that dissolved organic carbon (DOC) only affects metal species, and the accurate determination of labile Cu²⁺, Pb²⁺ and Cd²⁺ can be achieved when the diffusion coefficients of these metal ions in the diffusion phase have been determined. GCMCS is suitable for DGT application as a chelating agent for metal ions.     

Application of ion-imprinted polymer synthesized by precipitation polymerization as an efficient and selective sorbent for separation and pre-concentration of chromium ions from some real samples

In this study, a new Cr(III)-imprinted polymer (Cr(III)-IIP) is prepared from CrCl₃·6H₂O, methacrylic acid functional monomer, ethyleneglycoldimethacrylate cross-linking agent, 2,2?-azobisisobutyronitrile radical initiator and 2,2-(azanediylbis (ethane-2,1-diyl))bis(isoindoline-1,3-dione) ligand. To obtain the maximum adsorption capacity, the optimum condition was studied through pH, type and concentration of eluent, IIP weight, sample volume as well as the adsorption and desorption times. The Cr(III) ion content was determined via flame atomic absorption spectrometer. In optimum conditions, the adsorption capacity of the IIP for Cr(III) was obtained to be 74.65 mg g^?1, using 50 mg of IIP and the initial pH solution of 3.0. Both the adsorption and desorption times for quantitative analyses of Cr(III) ions were 15 and 5 min; respectively. After elution of the adsorbed ions by 3 mL of 4 mol L^?1 HNO₃ aqueous solution, the established IIP-based SPE procedure provides a reasonable pre-concentration factor of 100. The IIP-based pre-concentration method provides a low detection limit of 1.7 µg L^?1 with good repeatability (RSD?=?3.22%). Reusability studies confirmed that synthesis IIP is reusable and recoverable up to six cycles. According to the selectivity experiments, it was concluded that the prepared sorbent possesses more affinity toward Cr(III) ions than other ions such as Al³⁺, Pb²⁺, Cu²⁺, Mn²⁺, Fe²⁺, Zn²⁺, and Ni²⁺ ions. To evaluate the potential applicability of the proposed separation method, the pre-concentration and determination of trace amounts of Cr(III) were performed successfully in food samples with complex matrices, a bestial sample (i.e. cow liver) and an herbal product (i.e., broccoli) as real samples.     

Simultaneous voltammetric analysis of lead,copper and mercury ions by carbon paste electrode based on 1-(3-aminopropyl) imidazole modified polymer

In this study, a carbon paste electrode modified with a novel 1-(3-aminopropyl) imidazole functionalised crosslinked chlorosulfonated poly(styrene)-divinyl benzene polymer was used for selective and sensitive determination of the trace amounts of Pb²⁺, Cu²⁺ and Hg²⁺ ions by square wave anodic stripping voltammetry. The effect of some parameters such as paste composition, pH, preconcentration time, reduction potential and time, type of supporting electrolyte and potential scan rate on the determination of metal ions were investigated to find the optimal conditions. The effective open-circuit accumulation of the studied metal ions was succeeded only by the modification of the carbon paste electrode with functional polymer. For 6 min open-circuit preconcentration, the detection limit of Pb²⁺, Cu²⁺ and Hg²⁺ was found to be 5, 9 and 14 µgL^?1, respectively at 100 mVs^?1. The results confirmed that the lower concentration levels of these trace metal ions can be determined with the increase of preconcentration time and/or potential scan rate. Good detection limits and large dynamic concentration ranges were also obtained for their binary and ternary mixtures. The optimised method was successively applied to determine the concentration of Pb²⁺, Cu²⁺ ions in the tap water sample and Cu²⁺ ion in the waste water sample in the presence of possible interfering species (RSD<1%, recoveries 96–110% for 4 min preconcentration).     

Systematic Study of the Interaction Between VIV Centres and LnIII Ions in Well Defined {V 2 IV LnIII}{AsIIIW9O33}2 Sandwich-Type Clusters: Part 2

The gadolinium (Gd) member of a new type of heteropolytungstates that contain one lanthanide and two transition metal ions in a triangular arrangement is reported. The compound NaK₆Gd_0.33 [((VO)₂Gd(H₂O)₄K₂(H₂O)₂(Na)(H₂O)₂)(α-B-AsW₉O₃₃)₂]·24H₂O (1) was prepared from acidified aqueous solutions of Na₂WO₄·2H₂O, As₂O₃ and VOSO₄·5H₂O to which Gd³⁺ ions were added. The single crystal X-ray structure analysis (monoclinic, space group P2₁/m) shows that the anion consists of two [α-B-As^IIIW₉O₃₃]^9? trilacunary Keggin-type units linked by two VO²⁺, one Gd³⁺ as well as weakly by two K⁺ and one Na⁺ ions, resulting in a sandwich-type structure with idealized C _2v symmetry. The problem of positioning crystal lattice and special polyoxometalate sites with different cations is discussed also in connection with supramolecular chemistry aspects and as an option for further research. A fit of the magnetic susceptibility yielded exchange coupling constants of J _VV = ?2.55 cm^?1 (anti-ferromagnetic) between the vanadium ions and J _GdV = 0.6 cm^?1 (ferromagnetic) between the Gd and each of the two vanadium ions. The complete magnetochemical analysis also revealed a partial occupancy of the Na⁺ sites in the counter-cation–water system by Gd³⁺ ions (0.33 Gd³⁺ ions in total).