Thermal analysis of pyrotechnical mixtures II

A two-component pyrotechnical mixture containing MnO₂ and Pb₃O₄ has been investigated by TG, DTG and DTA. It was found that under 48 % MnO₂ content the oxygen release exceeds the value calculated on the basis of the reactions MnO₂ → Mn₃O₄ and Pb₃O₄ → PbO. Above a MnO₂ content of 7.5 % the decomposition is partly delayed and shifted to higher temperatures. With under 60% of MnO₂, at about 700? the components react exothermally with an increase in weight. The combined heats of the reactions MnO₂ → Mn₂O₃ and Pb₃O₄ → PbO give the highest value at 83 % of MnO₂.     

Synthesis and crystal structure of the novel Pb5Sb2MnO11 compound

The new Pb₅Sb₂MnO₁₁ compound was synthesized using a solid-state reaction in an evacuated sealed silica tube at 650°C. The crystal structure was determined ab initio using a combination of X-ray powder diffraction, electron diffraction and high-resolution electron microscopy (a=9.0660(8)Å, b=11.489(1)Å, c=10.9426(9)Å, S.G. Cmcm, R_I=0.045, R_P=0.059). The Pb₅Sb₂MnO₁₁ crystal structure represents a new structure type and it can be considered as quasi-one-dimensional, built up of chains running along the c-axis and consisting of alternating Mn⁺²O₇ capped trigonal prisms and Sb₂O₁₀ pairs of edge sharing Sb⁺⁵O₆ octahedra. The chains are joined together by Pb atoms located between the chains. The Pb⁺² cations have virtually identical coordination environments with a clear influence of the lone electron pair occupying one vertex of the PbO₅E octahedra. Electronic structure calculations and electron localization function distribution analysis were performed to define the nature of the structural peculiarities. Pb₅Sb₂MnO₁₁ exhibits paramagnetic behavior down to T=5 K with Weiss constant being nearly equal to zero that implies lack of cooperative magnetic interactions.     

Manganese oxide with hollow rambutan-like morphology as highly efficient electrocatalyst for oxygen evolution reaction

The research about oxygen evolution reaction (OER) has attracted extensive attention. In this work, different manganese oxides with different shell thickness were firstly grown on the surface of carbon ball template, and then the carbon ball was removed by high-temperature calcination in air to obtain hollow rambutan-like Mn₂O₃ and MnO₂–Mn₂O₃ with long nanowires. The concentration of inorganic manganese salt and the reaction time has a determining influence on the morphologies of manganese oxide. The as-prepared MnO₂–Mn₂O₃ exhibits a lower overpotential than the Mn₂O₃ to achieve a current density of 10 mA cm^?2. The Faradic efficiency of MnO₂–Mn₂O₃ reaches to 94.1% during the bulk electrolysis, and the morphology of MnO₂–Mn₂O₃ remains virtually unchanged after electrolysis, indicating the outstanding stability of the as-obtained MnO₂–Mn₂O₃.     

Conversion of porous PbO2 layers through galvanic displacement reaction with Mn2 + ions

The galvanic exchange between Mn^2 + ions and electrodeposited porous PbO₂ was studied to produce a porous oxide whose lower conductivity prevented its direct oxygen bubble-templated anodic deposition. Immersion of PbO₂ layers in acid acetate solutions of Mn^2 + led to the formation of amorphous MnO_x shell onto PbO₂. Due to its amorphous nature, MnO_x could not be proved to be MnO₂ by XRD. However, MnO_x was cathodically stripped at the same potential as MnO₂. The deposition of the MnO_x shell onto PbO₂ enhanced the capacity of the porous electrodes.     

Valence States of Lead and Bismuth Atoms in the High-Temperature Superconductor BaPb1-xBixO3

X-ray photoelectron spectra of valence bands and core levels of BaPb_0.8Bi_0.2O₃, PbO, PbO₂, BaPbO₃, BaBiO₃, NaBiO₃, and Bi₂O₃ were studied. Comparison of the electron binding energies of the Pb 4f7/2 or Bi 4f7/2 core levels for all the oxides studied showed that the high-temperature oxide superconductor BaPb_0.8Bi_0.2O₃ contains simultaneously two different valence forms of lead atoms (Pb^IV and Pb^II) and two different valence forms of bismuth atoms (Bi^V and BiIII). Parameters of the X-ray photoelectron spectra of the valence bands do not contradict the conclusion on heterovalent states of lead and bismuth atoms in BaPb_0.8Bi_0.2O₃.     

Phase equilibrium in the system Ln-Mn-O VI: Ln=Ho and Tb at 1100°C

Phase equilibria were established in Ho-Mn-O and Tb-Mn-O systems at 1100°C by varying the oxygen partial pressure from −log(P_O2/atm)=0-13.00, and phase diagrams for the corresponding Ln₂O₃-MnO-MnO₂ systems at 1100°C were presented. Stable Ln₂O₃, MnO, Mn₃O₄, LnMnO₃, and LnMn₂O₅ phases were found at 1100°C, whereas Ln₂Mn₂O₇, Ln₂MnO₄, Mn₂O₃, and MnO₂ were not found to be stable. Small nonstoichiometric ranges were found in the LnMnO₃ phase, with the composition of LnMnO₃ represented as functions of log(P_O2/atm), and . Activities of the components in the solid solution were calculated from these equations. The composition of LnMnO₃ may range from Ln₂O₃ rich to Ln₂O₃ poor, while MnO is slightly nonstoichiometric, being oxygen rich and LnMn₂O₅ seems to be nonstoichiometric. Lattice constants of LnMnO₃ quenched at different oxygen partial pressures and of LnMn₂O₅ quenched in air were determined. The standard Gibbs energy changes of the reactions appearing in the phase diagrams were also calculated. The relationship between the tolerance factor of LnMnO₃ and ΔG⁰of reaction, (1/2)Ln₂O₃+MnO+(1/4)O₂=LnMnO₃, is shown graphically.     

Study on the Role of Metal Oxides in Desulphurization of Some Petroleum Fractions

Metal oxides are highly reactive towards the compounds of sulphur, particularly thioles. A comparative study was made of the desulphurization potential of various metal oxides such as MnO₂, PbO₂, ArO₃, Al₂O₃, MgO₂, ZnO₂ and silica on reaction with Jhal Magsi crude oil and its distillate fractions, i.e., kerosene and diesel oil. The effect of time was also studied and the desulphurization was performed for time durations of one hour, three hours and six hours. The analysis of the residual fractions indicated that significant sulphur depletion occurred with lead oxide and manganese dioxide in the one‐hour and three‐hour reaction times in all three samples. Lead oxide (PbO₂) brought about a maximum desulphurization of 60.28% in the case of crude oil, 54.54% in the case of diesel oil and 52.57% in the case of kerosene oil in a 01 h reaction time. Similarly, manganese oxide (MnO₂) caused a maximum desulphurization of 58.55% in the case of crude oil, 49.38% in the case of diesel oil and 53.30% in case of kerosene oil in a 3 h reaction time. The rest of the metal oxides also exhibited good sulphur removal activity, but their performance is not as noteworthy as in the cases of PbO₂ and MnO₂.     

Solid phase reactivity of sodium oxosalts of manganese

The observed relationships are presented of the solid phase reactivity of the following salts: NaMnO₄, Na₂MnO₄, Na₃MnO₄, Na₄MnO₄, Na₂MnO₃, Na₂Mn₂O₅, Na₅MnO₄, Na₄Mn₂O₅, NaMnO₂, Na₄MnO₃, Na₂MnO₂ and Na₂Mn₂O₃.     

MnO2上氧气第一个电子转移步骤的从头计算研究

采用裸露簇和嵌入簇模型, 对β-MnO₂ (001), (110), (111)三个晶面以及O₂在(110)晶面的单址吸附模式(Pauling和Griffths模式), 进行从头计算. 从β-MnO₂ (001), (110), (111)三个晶面的电子结构差异以及O₂在(110)晶面吸附的吸附能、几何结构、集居数以及净电荷数分析得到: (001), (110), (111)三个晶面中(110)晶面的催化活性最高, 其活性顺序为(110)＞(111)＞(001). 氧气在(110)晶面的吸附, Pauling和Griffths两种吸附模式均存在, 属于化学吸附中的离子吸附. 氧气与MnO₂固体间发生了单电子转移, 氧气得到电子被还原成O₂^-, 转移电子属于整个体系, 具有离域性.     

Correlation between structure and catalytic activity of manganese oxides in liquid-phase oxidation of 1-octene

We have studied the correlation between the crystal structure and the catalytic activity of manganese oxides MnO, MnO₂, Mn₃O₄, and Mn₂O₃ in liquid-phase oxidation of 1-octene by molecular oxygen. The catalytic activity decreases in the series of oxides with octahedral coordination environment for the manganese atoms MnO−Mn₂O₃−MnO₂. The oxide Mn₃O₄ (with mixed tetrahedral and octahedral environment for the Mn atoms) catalyzes the process according to a different mechanism. L'vov Polytechnic State University, 12 S. Bandery ul., L'vov-13 290646, Ukraine. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 34, No. 5, pp. 324–327, September–October, 1998.     

少量CeO2的添加对Pd/La-Al2O3密偶催化剂三效性能的影响

以La改性的Al₂O₃为载体,采用共吸附浸渍法制备了一系列不同CeO₂含量的单Pd密偶催化剂,并对其进行了表征. PdO_x和CeO₂之间的强相互作用改善了Pd⁰再氧化为PdO的能力,同时增强了反应条件下硝酸盐,亚硝酸盐和异氰酸盐在载体上的吸附. 因此适量CeO₂的添加明显改善了新鲜催化剂对HC和NO_x的催化性能,且当CeO₂添加量为2%时催化效果最佳. Pd-Ce界面上PdO_x和CeO₂间强相互作用也使得PdO_x物种在高温时仍能以小颗粒的形式分散在载体上,从而显著地提高催化剂的热稳定性. 经1100 ℃高温老化后,CeO₂ （2%-4%）的存在明显拓宽了HC和NO_x的操作窗口,这对于提高单Pd密偶催化剂在汽车尾气处理上的催化性能有重要意义.     

Synthesis and crystal structure of the palladium oxides NaPd3O4, Na2PdO3 and K3Pd2O4

NaPd₃O₄, Na₂PdO₃ and K₃Pd₂O₄ have been prepared by solid-state reaction of Na₂O₂ or KO₂ and PdO in sealed silica tubes. Crystal structures of the synthesized phases were refined by the Rietveld method from X-ray powder diffraction data. NaPd₃O₄ (space group Pm3¯n, a=5.64979(6) Å, Z=2) is isostructural to NaPt₃O₄. It consists of NaO₈ cubes and PdO₄ squares, corner linked into a three-dimensional framework where the planes of neighboring PdO₄ squares are perpendicular to each other. Na₂PdO₃ (space group C2/c, a=5.3857(1) Å, b=9.3297(1) Å, c=10.8136(2) Å, β=99.437(2)°, Z=8) belongs to the Li₂RuO₃-structure type, being the layered variant of the NaCl structure, where the layers of octahedral interstices filled with Na⁺ and Pd⁴⁺ cations alternate with Na₃ layers along the c-axis. Na₂PdO₃ exhibits a stacking disorder, detected by electron diffraction and Rietveld refinement. K₃Pd₂O₄, prepared for the first time, crystallizes in the orthorhombic space group Cmcm (a=6.1751(6) Å, b=9.1772(12) Å, c=11.3402(12) Å, Z=4). Its structure is composed of planar PdO₄ units connected via common edges to form parallel staggered PdO₂ strips, where potassium atoms are located between them. Magnetic susceptibility measurements of K₃Pd₂O₄ reveal a Curie-Weiss behavior in the temperature range above 80 K.     

催化苯甲醇液相氧化反应的高效无定形氧化锰催化剂

研究了焙烧温度对无定形氧化锰的织构及其催化苯甲醇液相氧化反应性能的影响.结果表明,在焙烧温度不高于400℃的条件下,MnOx均保持无定形结构,进一步提高焙烧温度会促使无定形MnOx转变为晶相的OMS-2和Mn2O3.不同氧化锰催化剂的质量比活性随焙烧温度的升高而逐渐降低,无定形MnOx比晶相氧化锰(OMS-2,γ-MnO2和Mn2O3)具有更高的质量比活性,而110℃干燥的无定形氧化锰具有最高的活性.H2-程序升温还原研究表明,氧化锰的起始还原温度与其质量比活性之间存在线性逆变关系,表明氧化锰的还原性能是决定其催化活性的关键因素.     

XPS and XANES studies of SnO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> nanolayers

This paper presents the results of our XPS (X-ray photoelectron spectroscopy) and XANES (X-ray absorption near edge structure) studies of tin oxide nanolayers obtained by magnetron spraying of the metal and its further oxidation in air at different temperatures. It was shown that at 240°C (annealing temperature), tin monoxide was dominant in the surface layer of the samples. When the temperature was increased to 450°C, the phase composition corresponded to tin dioxide. Increased sorption ability was found for the samples oxidized at 450°C. The band structure model of SnO _x nanolayers obtained by superposition of the XANES and XPS data revealed cross transitions with energy ～3.7 eV in the presence of the SnO and SnO₂ phases. Surface doping of nanolayers with palladium gave the Pd, PdO, and PdO₂ components, among which PdO was most intense. Alternate treatments with O₂ and H₂ gases led to the disappearance of palladium dioxide and the reduction of PdO to the Pd metal. After the volume doping of nanoplayers with palladium, the surface layer contained PdO and PdO₂; the latter was represented by two types of particles with different sizes.     

Solubility of oxides in the KBr-BaBr2 eutectic melt (0.495: 0.505) at 973 K

Solubility products of MnO (pK _s,MnO = 6.32 ± 0.1), NiO (pK _s,NiO = 8.06 ± 0.2), and PbO (pK _s,PbO = 4.04 ± 0.2) in KBr-BaBr₂ (0.495: 0.505) melt at 973 K were determined by potentiometric titration using a Pt(O₂)|ZrO₂(Y₂O₃) membrane oxygen electrode. A significant increase in oxide solubilities compared to those of 2CsBr · KBr melt is attributed to the enhancement of acidic properties of cations in the series Cs⁺, K⁺-Ba²⁺, ensuring a greater degree of binding of oxide ions that results from dissociation of the oxide under study to the cationic framework of the melt. The solubilities of the investigated oxides in chloride and bromide melts with similar cationic compositions are virtually identical.     

Studies on the formation of manganese molybdate

The reaction of MoO₃ with various oxides of manganese (MnO, Mn₂O₃, Mn₃O₄ and MnO₂) and with MnCO₃ has been studied in air and nitrogen atmospheres employing DTA, TG and X-ray diffraction methods, with a view to elucidating the conditions for the formation of MnMoO₄. Thermal decomposition of MnCO₃ has also been studied in air and nitrogen atmospheres to help understand the mechanism of the reaction between MnCO₃ and MoO₃. The studies reveal that, whereas MnO, Mn₂O₃ and MnO₂ react smoothly with MoO₃ to form MnMoO₄, Mn₃O₄ does not react with MoO₃ in the temperature range investigated (48O–6OO°C). An equimolar mixture of MnCO₃ and MoO₃ reacts in air to yield MnMoO₄, while only a mixture of Mn₃O₄ and MoO₃ remains as final product when the same reaction is carried out in nitrogen. Marker studies reveal that manganese ions are the main diffusing species in the reaction between MoO₃ and manganese oxides that result in MnMoO₄.     

PdAs2O6, das erste paramagnetische Palladiumoxid

PdAs₂O₆, the First Paramagnetic Palladium Oxide Ssolid state reaction of palladium(II) oxide (PdO) and arsenic(V) oxide (As₂O₅) yielded an auburn colored microcrystalline powder of palladium(II) metaarsenate(V), PdAs₂O₆. The crystal structure of the compound belongs to the PbSb₂O₆ structure type, (no. 162), a = 4.8196(0) Å, c = 4.6646(1) Å, V = 93.84(0) ų and Z = 1. The structure consists of layers of edge sharing AsO₆ octahedra and PdO₆ octahedra connecting them. This is one of the rare structures with divalent palladium in octahedral coordination by oxygen. The compound is paramagnetic and shows antiferromagnetic ordering at about 150 K, which is 5 times higher than that of the isotypic NiAs₂O₆ compound.     

On the magnetic properties and the phase composition of the Cr2O3?MnOx-system (2 ≥ x ≥ 1.5)

The mixed oxide system Cr₂O₃? MnO_x (2 ≥ x ≥ 1.5) was investigated by X-ray diffraction, by measurements of magnetic susceptibility, and by chemical determination of excess oxygen (BUNSEN'S method). The Presence of the antiferromagnetic oxides Cr₂O₃, β-MnO₂, α-Mn₂O₃ and a ferromagnetic phase Cr_1?yMn_yO₂ was stated. The formation of the latter with fourvalent chromium is explained by a lattice induction effect of the MnO₂ (rutile type).     

Thermal decomposition of managanese oxyhydroxide

Temperature-programmed thermal decomposition of γ- and α-manganese oxyhydroxide has been studied between 20 and 670°C under vacuum and under a low pressure (10 Torr) of oxygen. Solid products at various temperatures have been analyzed by X-ray diffractometry. Under vacuum γ-MnOOH decomposed below 400°C to a mixture of Mn₅O₈, α-Mn₃O₄, and water according to the reaction scheme: 8MnOOH → Mn₅O₈ + Mn₃O₄ + 4H₂O. Above this temperature Mn₅O₈ was converted to α-Mn₃O₄ as a result of oxygen removal. The vacuum dehydration at 250°C of oxyhydroxide rich in α-MnOOH led to the formation of a new modification of Mn₂O₃ isostructural with corundum (α-Al₂O₃). In oxygen both oxyhydroxides decomposed to β-MnO₂. γ-MnOOH transformed directly to β-MnO₂ while α-MnOOH appeared to transform via corundum-phase Mn₂O₃ as an intermediate.     

Effect of the Calcination Temperature and Composition of the MnO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>–ZrO<Subscript>2</Subscript> System on Its Structure and Catalytic Properties in a Reaction of Carbon Monoxide Oxidation

The effect of the calcination temperature and composition of the MnO_x–ZrO₂ system on its structural characteristics and catalytic properties in the reaction of CO oxidation was studied. According to X-ray diffraction analysis and H₂ thermo-programmed reduction data, an increase in the calcination temperature of Mn_0.12Zr_0.88O₂ from 450 to 900°C caused a structural transformation of the system accompanied by the disintegration of solid solution with the release of manganese ions from the structure of ZrO₂ and the formation of, initially, highly dispersed MnO_x particles and then a crystallized phase of Mn₃O₄. The dependence of the catalytic activity of MnO_x–ZrO₂ in the reaction of CO oxidation on the calcination temperature takes an extreme form. A maximum activity was observed after heat treatment at 650–700°C, i.e., at limiting temperatures for the occurrence of a solid solution of manganese ions in the cubic modification of ZrO₂. If the manganese content was higher than that in the sample of Mn_0.4Zr_0.6O₂, the phase composition of the system changed: the solid solution phase was supplemented with Mn₂O₃ and β-Mn₃O₄ phases. The samples of Mn_0.4Zr_0.6O₂–Mn_0.6Zr_0.4O₂ exhibited a maximum catalytic activity; this was likely due to the presence of the highly dispersed MnO_x particles, which were not the solid solution constituents, on their surface in addition to an increase in the dispersity of the solid solution.