The unexpected course of the reaction of steroid sapogenins with diacetoxyiodobenzene and BF3·Et2O in formic acid

The reaction of steroid sapogenins of both the 25R and 25S series with diacetoxyiodobenzene and BF₃·Et₂O in formic acid produced a mixture of an equatorial 23-formyloxysapogenin, a 16β,23:23,26-diepoxy-22-one and a bisnorcholanic lactone. The outcome of this reaction, that drastically differs from the same reaction in acetic acid, opens up new possibilities for the transformation of the side chain of steroid sapogenins.     

Selective synthesis of Neu5Ac2en and its oxazoline derivative using BF3·Et2O

Application of the Lewis acid BF₃·Et₂O to the selective synthesis of 5-acetamido-2,6-anhydro-3,5-dideoxy-d-glycero-d-galacto-non-2-enonic acid (Neu5Ac2en) and the related oxazoline, methyl 7,8,9-tri-O-acetyl-2,3,4,5-tetradeoxy-2,3-didehydro-2,3-trideoxy-4′,5′-dihydro-2′-methyloxazolo[5,4-d]- d-glycero-d-talo-non-2-enonate is described.     

BF3·Et2O promoted one-pot expeditious and convenient synthesis of 2-substituted benzimidazoles and 3,1,5-benzoxadiazepines

2-Substituted benzimidazoles and 3,1,5-benzoxadiazepines have been synthesized in excellent yields in a single pot by cyclodehydration of N-acyl-1,2-phenylenediamines and N,N^′-diacyl-1,2-phenylenediamines prepared in situ from the corresponding 1,2-phenylenediamines and an acid chloride, respectively.     

Electrosynthesis of highly conducting poly(1,5-dihydroxynaphthalene) in BF3·Et2O

Direct anodic oxidation of 1,5-dihydroxynaphthalene (DHN), an important derivative of naphthalene, led to the formation of high-quality semiconducting poly(1,5-dihydroxynaphthalene) (PDHN) on stainless steel sheets in boron trifluoride diethyl etherate (BFEE). The onset oxidation potential of DHN in this medium was measured to be only 0.78 V vs. SCE, which was lower than that determined in traditional acetonitrile containing 0.1 mol/L tetrabutylammonium tetrafluoroborate (0.98 V vs. SCE). As-formed PDHN films showed good redox activity and stability, together with interesting electrochromic property from brown (doped) to yellow-green (dedoped). Structural characterization, including FTIR, ¹H NMR, and quantum chemistry calculations, indicated that the polymerization of DHN probably occurred at C₄ and C₈ positions. Moreover, thermal analysis revealed that PDHN displayed better thermal stability than that synthesized by chemical method. The fluorescence spectral studies, together with the electrical tests, showed that PDHN was a good blue light-emitter (fluorescence quantum yield higher than 0.1) with an electrical conductivity of as high as 0.46 S/cm.     

Regio- and stereo-selective aza-Diels-Alder reaction of ethyl glyoxylate 4-methoxyphenylimine with 1,3-dienes in the presence of BF3·Et2O. Evidence for a non-concerted mechanism

Cycloadditions of the glyoxylate imine 1 with 1-substituted and 1,4-disubstituted 1,3-dienes furnished tetrahydroquinoline compounds 4 and 5/15 with total regio- and stereo-control, except for one case where a mixture of isomers was formed. A stepwise mechanism is proposed in view of the stereochemistry of the products.     

BF3·Et2O catalyzed diastereoselective nucleophilic reactions of 3-silyloxypiperidine N,O-acetal with silyl enol ether and application to the asymmetric synthesis of (+)-febrifugine

The asymmetric BF₃·Et₂O catalyzed nucleophilic reactions of 3-silyloxypiperidine N,O-acetal 10 with silyl enol ethers derived from ketones are described. (+)-Febrifugine 1, an antimalarial alkaloid, was successfully synthesized based on this nucleophilic substitution. In addition, N,O-acetal 10 was synthesized from l-benzyl glutamate in 11 steps.     

An efficient and simple method for synthesis of 2,2-disubstituted-2H-chromenes by condensation of a phenol with a 1,1-disubstituted propargyl alcohol using BF3·Et2O as the catalyst

An efficient and simple method for the synthesis of 2,2-disubstituted-2H-chromenes by one-step cyclocondensation of a phenol with a variety of 1,1-disubstituted propargyl alcohols using BF₃·Et₂O as the catalyst is described.     

A one-pot selective deprotective acetylation of benzyl ethers and OTBDMS ethers using the BF3·Et2O-NaI-Ac2O reagent system

An efficient selective deprotection followed by acetylation of several benzyl ethers, including 6-OBn ethers of monosaccharides, and -OTBDMS ethers has been developed by using the BF₃·Et₂O-NaI-Ac₂O reagent system. In addition, both benzylidene and isopropylidene groups are deprotected to form the corresponding diacetates.     

BF3·OEt2-promoted reaction of isocyanides with o-aminobenzophenones

Aliphatic isocyanides react with o-aminobenzophenones in dichloromethane under Lewis acid catalysis at ambient temperature to give, unexpectedly, 4-aryl-4-hydroxy-3,4-dihydroquinazolines in good to excellent yields. The outcome of the reaction is rationalized by a skeletal rearrangement of the initially formed ‘intramolecular Passerini’ reaction products, 2-amino-3-hydroxy-3-aryl-3H-indoles.     

Synthesis of novel steroids bearing a spirochromene side chain by BF3·Et2O catalyzed aldol condensation of spirostane sapogenins and salicylaldehyde

Treatment of a CH₂Cl₂ solution of sarsasapogenin acetate with salicylaldehyde and BF₃·Et₂O afforded a mixture of two C-22 epimeric steroids bearing a spirochromene moiety in the side chain. The elucidation of the structures of the new compounds were carried out employing a combination of 1D and 2D NMR techniques that includes ¹H, ¹³C, HSQC, HMBC, COSY and NOESY.     

BF3·Et2O-induced Beckmann rearrangement of 23-hydroxyiminosapogenins. A shortcut to bisnorcholanic lactones

Treatment of 23-hydroxyiminosapogenins with BF₃·Et₂O in acetic acid produced good yields of the corresponding bisnorcholanic lactones as the sole products.     

Concise and efficient synthesis of 3′-O-triphosphates of 2′-deoxyadenosine and 2′-deoxycytidine

We describe concise and efficient synthesis of 2′-deoxyadenosine-3′-O-triphosphate (2′-d-3′-ATP) and 2′-deoxycytidine-3′-O-triphosphate (2′-d-3′-CTP) which are well known for their various biological applications. One-pot synthetic methodology was used to convert N⁶-Benzoyl-5′-O-levulinoyl-2′-deoxyadenosine into N⁶-Benzoyl-5′-O-levulinoyl-2′-deoxyadenosine-3′-O-triphosphate in 72% yield. One-step concurrent deprotection of N⁶-Benzoyl and 5′-O-levulinoyl groups using concentrated aqueous ammonia resulted in 2′-d-3′-ATP in 75% yield. The same synthetic strategy was successfully employed to convert N⁴-Benzoyl-5′-O-levulinoyl-2′-deoxycytidine into 2′-d-3′-CTP in 66% yield.     

The reaction of MgCl2·4H2O with CCl2F2

A new reaction of MgCl₂·4H₂O with CCl₂F₂ is investigated by DTA and TG from room temperature to 350 °C. It is observed that MgF₂ was obtained between 252 and 350 °C, Below the temperature, MgCl₂·4H₂O dehydrates and hydrolyzes to MgCl₂ and Mg(OH)Cl, which are the real reactants of the reaction with CCl₂F₂. The formation of MgF₂ is ascribed to the reaction of MgCl₂ and Mg(OH)Cl with HF, which forms by decomposition of CCl₂F₂ with the taking part in of H₂O released from dehydration of hydrated magnesium chloride on the surface of MgCl₂ and Mg(OH)Cl, which catalyzes the decomposition of CCl₂F₂ in this case. Consequently, the reactions are tested in the fluid-bed condition. It is found that MgF₂ formed at temperatures down to 200 °C in a fluid-bed reactor. This reaction may be used as a method of disposing of the environmentally sensitive CCl₂F₂ (rather than release into the atmosphere). It is also a method for the preparation of MgF₂.     

CeCl3·H2O/NaI-Promoted stereoselective synthesis of 2,4-disubstituted chiral tetrahydroquinolines

d-Glycals readily undergo cyclization with aryl amines in the presence of CeCl₃·7H₂O-NaI under mild and neutral conditions to afford a novel sugar derived tetrahydroquinoline derivatives in good yields with high stereoselectivity. The stereochemistry of the products was assigned by using various NMR studies.     

Reaction of a 5α-bromo-6β,19-epoxysteroid with BF3·Et2O/Ac2O: An evidence of a cyclic bromonium cation

Treatment of 3β-acetoxy-5-bromo-6β,19-epoxy-5α-androstan-17-one with Ac₂O and BF₃·OEt₂, produced the cleavage of the epoxy moiety and migration of the bromine atom to afford 3β,19-diacetoxy-6α-bromo-5-hydroxy-5β-androst-17-one in high yield.     

Nd(Gly)2Cl3·3H2O和Pr(Ala)3Cl3·3H2O的热力学性质

利用精密自动绝热热量计测定了Nd(Gly)₂Cl₃·3H₂O在80-357K和Pr(Ala)₃Cl₃·3H₂O在80-374K温区的热容. 根据两个化合物的热容计算出了相对于参考温度298.15K的热力学函数(H_T?H_298.15)和(S_T?S_298.15). 根据热重(TG)分析结果, 提出了这两个稀土化合物可能的热分解机理. 利用溶解-反应恒温热量计测定相关化合物的溶解焓并设计盖斯热化学循环, 计算出了两个化合物的标准摩尔生成焓.     

Oxidation of aldimines to amides by m-CPBA and BF3·OEt2

Several amides were obtained in high yields by an efficient method from the corresponding imines which are readily prepared from aldehydes. This procedure involves the oxidation of aldimines with m-CPBA and BF₃·OEt₂. In this reaction, the product is strongly influenced by the electron releasing capacity of the aromatic substituent.     

General method for the synthesis of 2′-O-carboranyl-nucleosides

The carboranyl cage is a new modifying entity for nucleosides, DNA oligonucleotides, and other biomolecules. Herein, the first reliable method for the synthesis of nucleosides modified with a carborane cluster at the 2′-position is described.     

CeCl3·7H2O/AcCl-catalyzed Prins-Ritter reaction sequence: a novel synthesis of 4-amido tetrahydropyran derivatives

Homoallylic alcohols, carbonyl compounds and nitriles undergo a smooth tandem Prins-Ritter type cyclization in the presence of CeCl₃·7H₂O/AcCl at ambient temperature to produce 4-amido tetrahydropyrans in high yields with all cis-selectivity. Spirocyclic 4-amido tetrahydropyrans are obtained in the case of cyclic ketones.     

BF3-Et2O mediated biogenetic type synthesis of chromanochalcones from prenylated chalcones via a regioselective cyclization reaction

In continuation of our program on synthetic chalcones, we have developed a simple and convenient method for the synthesis of chromanochalcones from prenylated chalcones in high yields by regioselective cyclization using BF₃-Et₂O.