Structure analysis and the standard molar enthalpy of formation of a coordination polymer [Co(TO)2Cl2]n (TO = 1,2,4-triazole-5-one)

A coordination polymer was synthesized by the reaction of CoCl₂ with 1,2,4-triazole-5-one (TO) and charaterized by means of IR and TG–DTG. Single-crystal structure analysis showed that the complex crystallized in the monoclinic space group C2/c: a = 23.105(9) Å, b = 3.5683(2) Å, c = 13.589(6) Å,  = 90°, β = 124.038(4)°, γ = 90°, V = 928.4(7) Å³, Z = 4. The standard molar enthalpy of formation of the complex was determined to be (−1034.28 ± 0.95) kJ mol⁻¹.     

Structures of 3,3′-dicarbometoxy-2,2′-bipyridine complexes with silver(I) and copper(II) cations

The structures of 3,3′-dicarbometoxy-2,2′-bipyridine (dcmbpy) complexes with copper(II) and silver(I) cations have been determined using single crystal X-ray-diffraction. The crystals of Cu(dcmbpy)Cl₂ are monoclinic, C2/c, a = 16.966(3), b = 18.373(3), c = 13.154(2) Å, β = 126.543(3)°. The crystals of Ag(dcmbpy)NO₃ · H₂O are also monoclinic, C2/c, a = 16.7547(13), b = 11.0922(9), c = 18.7789(18) Å, β = 100.228(7)°. The results have been compared with the literature data on the complexes of dcmbpy and its precursors: 2,2′-bipyridine (bpy) and 3,3′-dicarboxy-2,2′-bipyridine (dcbpy). Two types of complexes of 3,3′-carboxy derivatives of bpy are distinguished: (1) with metal atom bonded to two N atoms of the same molecule and (2) with metal atom bonded to two N atoms of two different molecules. The Cu(dcmbpy)Cl₂ complex belongs to the first type, whereas Ag(dcmbpy)NO₃ · H₂O belongs to the second type.     

Crystalline polysilicate magadiite with intercalated n-alkylmonoamine and some correlations involving thermochemical data

Synthesized hydrated lamellar acidic crystalline magadiite (H₂Si₁₄O₂₉·2H₂O) nanocompound was used as host for intercalation of polar n-alkylmonoamine molecules of the general formula H₃C(CH₂)_nNH₂ (n = 1–6) in aqueous solution. The original interlayer distance (d) of 1500 pm, determined by X-ray powder diffraction patterns, increases after intercalation. The values correlated with the number of aliphatic amine carbon (n_c) atoms: d = [(1312 ± 11) + (21 ± 2)]n_c. The amount of intercalated amines (N_s), decreased as n_c increased: N_s = [(5.82 ± 0.04) − (0.45 ± 0.01)]n_c. The acidic layered nanocompound was calorimetrically titrated with the amines and the thermodynamic data gave exothermic values for all guest molecules, as shown by the correlation: Δ_intH = −[(24.45 ± 0.49) − (1.91 ± 0.10)]n_c and d = [(1576 ± 16) − (10.8 ± 1.0)]Δ_intH. The negative values of the Gibbs energies and the positive entropies also presented the correlations: Δ_intG = −[(22.8 ± 0.2) − (0.2 ± 0.1)]n_c and Δ_intS = [(6 ± 1) + (5 ± 1)]n_c, respectively.     

Release properties on gelatin-gum arabic microcapsules containing camphor oil with added polystyrene

In this study, gelatin blended with arabic gum microcapsules containing camphor oil with added polystyrene were fabricated by a compound coacervation method. The parameters of oil/wall volume ratio, emulsification stirring speed, concentration of cross-linking agent, treated time and oil release properties were investigated. In order to improve the constant release effect of camphor oil, oil-soluble polystyrene (PS) was used as a sustained release agent. The camphor oil release curves were expressed by the exponential equation: ψ(t) = C_eq(1–e^−t/τ), where ψ(t) represent the variant of camphor oil concentration in the operation environment, C_eq as the equilibrium state, t as the release time and τ as time constant. C_eq and τ are significant factors pertaining to the camphor oil release properties. The results indicated that, for the microcapsules, the optimal oil/wall volume ratio was 0.75 to achieve the encapsulation efficiency of 99.6 wt.%. The average particle size were 294.7 ± 14.2 μm, 167.2 ± 11.2 μm, 85.7 ± 8.7 μm at the homogenization stirring speed of 500, 1000, and 2000 rpm, respectively. The effect of sustained oil release will increase whereas the stirring speed decreases and the concentration of glutaraldehyde (GA) and treated time increases. Along with the increasing of quantity of polystyrene added, C_eq decreased and τ increased, indicating that the sustained oil release amount and the release rate depend on the quantity of PS considerably.     

'Genome order index' should not be used for defining compositional constraints in nucleotide sequences

A “genome order index,” defined as S = a² + c² + t² + g², where a, c, t, and g are the nucleotide frequencies of A, C, T, and G, respectively, was used to suggest that there exist genome-specific constraints on nucleotide composition. We show that the “evidence” for constraint, S < 1/3, is in fact a mathematical property that is always true regardless of data. Moreover, we show that S is strictly equivalent to and derivable from the Shannon H-function and has no advantage over it.     

Amphiphile bilayer films from DPPC: bilayer lipid membranes and Newton black films

Amphiphile bilayer films are obtained from 1,2 dipalmitoyl-glycero-3-phosphocholine (DPPC): bilayer lipid membranes (BLM) and Newton black films (NBF), through thinning of the respective thin liquid films, thus allowing for a very precise determination of the moment of their formation. Stability (or rupture) and formation of BLM and NBF are considered from a unified point of view with the microscopic theory of Kashchiev–Exerowa [J. Colloid Interface Sci., 77 (1980) 501–511], based on the formation of nanoscopic holes in them. BLM and NBF are obtained and studied with the microinterferometric method of Scheludko–Exerowa in its contemporary version. The equivalent thickness of both BLM (in benzene solution between two water phases with 0.1 M NaCl) and NBF in aqueous DPPC solution (in the presence of 0.1 M NaCl) is determined as being h_w = 7.0 nm for BLM and h_w = 7.8 nm for NBF. By means of the dependences: BLM lifetime versus DPPC concentration and probability for BLM formation versus DPPC concentration, it is established that there exist metastable BLM and stable NBF. The good fit between the experimental results of τ(C) dependence and theory in the case of BLM allow to determine the three constants: pre-exponential factor A = 1.5 × 10⁻³ s, related to the process kinetics; constant B = 20.2 ± 0.2, related to the specific hole energy γ = 1.7 × 10⁻¹¹ J/m and the equilibrium concentration C_e = 6 × 10⁻⁴ ± 7.2 × 10⁻⁶ m/l. The specific hole linear energy γ = 1.7 × 10⁻¹¹ J/m determined as well as the binding energy Q between first neighbor molecules in the bilayers Q = 1.48 × 10⁻¹⁹ J (36 kT) are lower than the ones determined for DPPC foam bilayer in gel state γ = 9.1 × 10⁻¹¹ J/m and Q = 55 kT. This means that interaction is weaker in the case of BLM. The critical concentration C_c at which bilayer formation starts is: for BLM C_c = 30 μg/ml and for NBF C_c = 70 μg/ml. This concentration characterizes quantitatively the formation of the amphiphile bilayer and is a very useful parameter that can be used for various purposes.     

Flow injection visible diffuse reflectance quantitative analysis of nickel

Flow injection (FI) methodology, using diffuse reflectance in the visible region of the spectrum, for the analysis of nickel, precipitated in the form of dimethylglyoximate, is presented. A reflectance cell, constructed in polytetrafluoroethylene, using a LED (light emitting diode) as light source and a LDR (light dependent resistor) as detector, is described. The analytical signal (S) correlates with nickel concentration (C) between 1.6 × 10⁻⁴ and 6.6 × 10⁻⁴ mol L⁻¹. This correlation is described by the equation S = −1.108 + 3.314 × 10⁴C − 2.081 × 10⁷C² (r = 0.9996). The experimentally observed limit of detection is about 1.3 × 10⁻⁴ mol L⁻¹, as in lower concentrations the formation of precipitate is not observed. The experimental quantitation limit is about 1.6 × 10⁻⁴ mol L⁻¹. The mean R.S.D. (relative standard deviation) is about 2.7%. Samples containing nickel were analyzed and the results obtained in this method were compared with those of other methods using the statistical Student's t-test.     

The efficacy of nitrosonaphthol functionalized XAD-16 resin for the preconcentration/sorption of Ni(II) and Cu(II) ions

Amberlite XAD-16 resin has been functionalized using nitrosonaphthol as a ligand and characterized employing elemental, thermogravimetric analysis and FT-IR spectroscopy. The sorption of Ni(II) and Cu(II) ions onto this functionalized resin is investigated and optimized with respect to the sorptive medium (pH), shaking speed and equilibration time between liquid and solid phases. The monitoring of the influence of diverse ions on the sorption of metal ions has revealed that phosphate, bicarbonate and citrate reduce the sorption up to 10–14%. The sorption data followed Langmuir, Freundlich, and Dubinin–Radushkevich (D–R) isotherms. The Freundlich parameters computed are 1/n = 0.56 ± 0.03 and 0.49 ± 0.05, A = 9.54 ± 1.5 and 6.0 ± 0.5 mmol g⁻¹ for Ni(II) and Cu(II) ions, respectively. D–R isotherm yields the values of X_m = 0.87 ± 0.07 and 0.35 ± 0.05 mmol g⁻¹ and of E = 9.5 ± 0.23 and 12.3 ± 0.6 kJ mol⁻¹ for Ni(II) and Cu(II) ions, respectively. Langmuir characteristic constants estimated are Q = 0.082 ± 0.005 and 0.063 ± 0.003 mmol g⁻¹, b = (4.7 ± 0.2) × 10⁴ and (7.31 ± 0.11) × 10⁴ l mol⁻¹ for Ni(II) and Cu(II) ions, respectively. The variation of sorption with temperature gives thermodynamic quantities of ΔH = −58.9 ± 0.12 and −40.38 ± 0.11 kJ mol⁻¹, ΔS = −183 ± 10 and −130 ± 8 J mol⁻¹ K⁻¹ and ΔG = −4.4 ± 0.09 and −2.06 ± 0.08 kJ mol⁻¹ at 298 K for Ni(II) and Cu(II) ions, respectively. Using kinetic equations, values of intraparticle transport and of first order rate constant have been computed for both the metal ions. The sorption procedure is utilized to preconcentrate these ions prior to their determination in tea, vegetable oil, hydrogenated oil (ghee) and palm oil by atomic absorption spectrometry using direct and standard addition methods.     

Conductivity, calorimetry and phase diagram of the NaHSO4–KHSO4 system

Physico-chemical properties of the binary system NaHSO₄–KHSO₄ were studied by calorimetry and conductivity. The enthalpy of mixing has been measured at 505 K in the full composition range and the phase diagram calculated. The phase diagram has also been constructed from phase transition temperatures obtained by conductivity for 10 different compositions and by differential thermal analysis. The phase diagram is of the simple eutectic type, where the eutectic is found to have the composition X(KHSO₄) = 0.44 (melting point ≈ 406 K). The conductivities in the liquid region have been fitted to polynomials of the form κ(X) = A(X) + B(X)(T − T_m) + C(X)(T − T_m)², where T_m is the intermediate temperature of the measured temperature range and X, the mole fraction of KHSO₄. The possible role of this binary system as a catalyst solvent is also discussed.     

An improved procedure for flow-based turbidimetric sulphate determination based on a liquid core waveguide and pulsed flows

An improved flow-based procedure is proposed for turbidimetric sulphate determination in waters. The flow system was designed with solenoid micro-pumps in order to improve mixing conditions and minimize reagent consumption as well as waste generation. Stable baselines were observed in view of the pulsed flow characteristic of the systems designed with solenoid micro-pumps, thus making the use of washing solutions unnecessary. The nucleation process was improved by stopping the flow prior to the measurement, thus avoiding the need of sulphate addition. When a 1-cm optical path flow cell was employed, linear response was achieved within 20–200 mg L⁻¹, described by the equation S = −0.0767 + 0.00438C (mg L⁻¹), r = 0.999. The detection limit was estimated as 3 mg L⁻¹ at the 99.7% confidence level and the coefficient of variation was 2.4% (n = 20). The sampling rate was estimated as 33 determinations per hour. A long pathlength (100-cm) flow cell based on a liquid core waveguide was exploited to increase sensitivity in turbidimetry. Baseline drifts were avoided by a periodical washing step with EDTA in alkaline medium. Linear response was observed within 7–16 mg L⁻¹, described by the equation S = −0.865 + 0.132C (mg L⁻¹), r = 0.999. The detection limit was estimated as 150 μg L⁻¹ at the 99.7% confidence level and the coefficient of variation was 3.0% (n = 20). The sampling rate was estimated as 25 determinations per hour. The results obtained for freshwater and rain water samples were in agreement with those achieved by batch turbidimetry at the 95% confidence level.     

Extraction of arsenic as the diethyl dithiophosphate complex with supercritical fluid and quantitation by cathodic stripping voltammetry

The separation of arsenic based on in situ chelation with ammonium diethyl dithiophosphate (ADDTP) has been carried out using methanol-modified supercritical CO₂. Aliquots of extract were added to an electroanalytical cell and arsenic was determined by square wave cathodic stripping voltammetry (SWCSV) at a hanging mercury drop electrode (HMDE). Quantitative extractions of As(DDTP)₃ were achieved when the experiments were carried out at a pressure of 2500 psi, a temperature of 90 °C, 2.0 mL of methanol, 20.0 min of static extraction and 5.0 min of dynamic extraction in the presence of 18 mg of ADDTP. Analysis of arsenic was made using 150 mg L⁻¹ of Cu(II) in 1 M HCl solution as supporting electrolyte in the presence of ADDTP as ligand. Preconcentration was carried out by deposition at a potential of −0.50 V and the intermetallic compound Cu_xAs_y was reduced at a potential of −0.77 to −0.82 V, depending on ligand concentration. The results showed that the presence of ligand plays an important role, increasing the method's sensitivity and preventing the oxidation of As(III). The calibration graph of the As(DDTP)₃ solution was linear from 0.8 to 12.5 μg L⁻¹ of arsenic (LOD 0.5 μg L⁻¹, R = 0.9992, t_acc = 60 s). The method was validated using carrot pulp spiked with arsenic solution. This method was applied to the determination of arsenic in samples of carrots, beets and irrigation water. Arsenic in beets was: skin 4.10 ± 0.18 mg kg⁻¹; pulp 3.83 ± 0.19 mg kg⁻¹ and juice 0.71 ± 0.09 mg L⁻¹; arsenic in carrots was: skin 2.15 ± 0.09 mg kg⁻¹; pulp 0.59 ± 0.11 mg kg⁻¹ and juice 0.71 ± 0.03 mg L⁻¹. Arsenic in water were: Chiu-Chiu 0.08 mg L⁻¹, Inacaliri 1.12 mg L⁻¹, and Salado river 0.17 ± 0.07 mg L⁻¹.     

The pseudogap in LSCO-type high-temperature superconductors as seen by neutron crystal-field spectroscopy

We studied the isotope, pressure and doping effects on the pseudogap temperature T^* by neutron spectroscopic experiments of the relaxation rate of crystal-field excitations in La_1.96−xSr_xHo_0.04CuO₄ (x = 0.11, 0.15, 0.20, 0.25) on the high-resolution time-of-flight spectrometer FOCUS at SINQ, PSI. We found clear evidence for the opening of a pseudogap in the underdoped regime at T^*(x = 0.11) = (82.2 ± 1.2) K as well as in the overdoped and the heavily overdoped compounds at T^*(x = 0.2) = (49.2 ± 0.7) K and at T^*(x = 0.25) = (46.5 ± 0.5) K, respectively. Furthermore, we investigated the effect of oxygen isotope substitution on the pseudogap, the experiments revealed ΔT^*(x = 0.11) = (21.3 ± 5.2) K and ΔT^*(x = 0.2) = (4.5 ± 1.3) K. The application of hydrostatic pressure (0.8 and 1.2 GPa) on the optimally doped compound (x = 0.15) results in a downward shift of dT^*/dp = (−5.9 ± 1.6) K/GPa.     

Strong antiferromagnetism in the dinuclear 2-pyridone complex with N–C–O bridges: A paddle-wheel analogue of the dinuclear tetracarboxylates

A novel dinuclear complex [Cu₂(μ-L)₄(HL)₂] (1) was isolated from starting 2-pyridone (HL) via a resonance and a tautomeric transformation. Each copper centre is in a square-pyramidal coordination sphere, defined by two oxygen atoms (Cu–O4 1.978(5), Cu–O11 1.964(4) Å) and two nitrogen atoms (Cu–N2 2.003(5), Cu–N3 2.007(5) Å) of four bridging deprotonated pyridin-2-olates and an oxygen atom on the top from a neutral 2-pyridone (Cu–O2 2.227(5) Å), analogous to tetracarboxylate paddle-wheel complexes. Compound 1 was compared with mixed pyridin-2-olato/methanoato analogues [Cu₂(μ-HCO₂)₂(μ-L)₂(HL)₂] · 2CH₃CN (2) and [Cu₂(μ-HCO₂)₂(μ-L)₂(HL)₂] (2a) (2a is an air stable form obtained from 2 outside mother-liquid). The EPR spectra of air stable 1 and 2a show three signals H_z1, H₂ and H_z2, typical for the binuclear systems with spin S = 1, both revealing strong antiferromagnetism 2J = −334 (1) and −324 cm⁻¹ (2a). Interestingly, only for 1 additional H₁ signal at 100 mT is noticed (D(1) = 0.293 cm⁻¹ < hν = 0.320 cm⁻¹ < D(2a) = 0.347 cm⁻¹). On the other hand, several broad signals in the 100–450 mT region, only in the high temperature spectrum for 2a are observed. These results are in agreement with the magnetic susceptibility analysis.     

Synthesis and thermodynamic properties of a metal-organic framework: [LaCu6(μ-OH)3(Gly)6im6](ClO4)6

A metal-organic complex, which has the potential property of absorbing gases, [LaCu₆(μ-OH)₃(Gly)₆im₆](ClO₄)₆ was synthesized through the self-assembly of La³⁺, Cu²⁺, glycine (Gly) and imidazole (Im) in aqueous solution and characterized by IR, element analysis and powder XRD. The molar heat capacity, C_p,m, was measured from T = 80 to 390 K with an automated adiabatic calorimeter. The thermodynamic functions [H_T − H_298.15] and [S_T − S_298.15] were derived from the heat capacity data with temperature interval of 5 K. The thermal stability of the complex was investigated by differential scanning calorimetry (DSC).     

Synthesis, structure and oxygen nonstoichiometry of La0.4Sr0.6Co1−yFeyO3−δ

The samples of La_0.4Sr_0.6Co_1−yFe_yO_3−δ (y = 0.2 and 0.4) were prepared using both conventional ceramic technique and nitrate–citrate precursors technique. The phase identification was made by X-ray diffraction method. The refinement of structural parameters from the XRD and neutron diffraction measurements was performed by full profile Rietveld analysis. Neutron diffraction showed that both samples possess distorted perovskite-type structure. Oxygen nonstoichiometry was measured by chemical analysis and thermogravimetry (TG) analysis in the range 20 ≤ T/°C ≤ 900 and 2E-5 ≤ pO₂/atm ≤ 4E-1. TG-experiments indicate a relatively fast and reversible oxygen exchange at pO₂ > 1E-2 atm. Mass saturation occurs at T < 300 °C upon cooling. The absolute value of oxygen nonstoichiometry was determined by iodometric titration measurements. It was found that both samples have practically stoichiometric composition at 300 °C in air and δ increases with increasing temperature and decreasing oxygen partial pressure.     

Thermal stability and related thermodynamic properties of N-ethylthiourea

The enthalpy and entropy of sublimation of N-ethylthiourea were obtained from the temperature dependence of its vapour pressure measured by both the torsion–effusion and the Knudsen effusion method in the temperature range 360–380 K. The compound undergoes no solid-to-solid phase transition or decomposition below 380 K. The pressure against reciprocal temperature resulted in lg(p, kPa) = (13.40 ± 0.27) − (6067 ± 102) /T(K). The molar sublimation enthalpy and entropy at the mid interval temperature were Δ_subH_m(370 K) = (116.1 ± 2.0) kJ mol⁻¹ and Δ_subS_m(370 K) = (218.0 ± 5.2) J mol⁻¹ K⁻¹, respectively. The same quantities derived at 298.15 K were (118.8 ± 2.1) kJ mol⁻¹ and (226.1 ± 5.5) J mol⁻¹ K⁻¹, respectively.     

Heat capacity, enthalpy and entropy of strontium bismuth niobate and strontium bismuth tantalate

The heat capacities and enthalpy increments of strontium bismuth niobate SrBi₂Nb₂O₉ (SBN) and strontium bismuth tantalate SrBi₂Ta₂O₉ (SBT) were measured by the relaxation method (2–150 K), Calvet-type heat-conduction calorimetry (305–570 K) and drop calorimetry (773–1373 K). The temperature dependences of non-transition heat capacities in the form C_pm = 324.47 + 0.06371T − 5.0755 × 10⁶/T² J K⁻¹ mol⁻¹ (298–1400 K) and C_pm = 320.22 + 0.06451T − 4.7001 × 10⁶/T² J K⁻¹ mol⁻¹ (298–1400 K) were derived for SBN and SBT, respectively, by the least-squares method from the experimental data. Furthermore, the standard molar entropies at 298.15 K S_m°(SBN)=327.15±0.80 and S_m°(SBT)=339.23±0.72 J K⁻¹ mol⁻¹ were evaluated from the low-temperature heat capacity measurements.     

The early stages of Saccharomyces cerevisiae yeast suspensions damage in moderate pulsed electric fields

The objectives of this study were to investigate the effects of pulsed electric fields (PEF) application to colloidal suspension of Saccharomyces cerevisiae. The electrical conductivity measurements during the PEF-treatment of S. cerevisiae suspensions were used to monitor the extent of cell damages in the intervals of electric field strength E = 3–15 kV/cm and time of PEF treatment t_PEF = 10⁻⁴ to 1 s. At relatively small fields (E < 7.5 kV/cm) the early stages of yeast cells damages were observed. At such treatment conditions, the damage was incomplete and developed at long time of PEF treatment, below the value of E = 7.5 kV/cm which is commonly referred in literature as a threshold for this culture. Data obtained for the disintegration in conductivity experiments were found in good correlation with direct counting of yeast lethality using light microscopy. The PEF-induced lethality of the yeast cells and size flocs increased with the mixing of suspensions and the increase of temperature.     

Time measurement-visual analysis of nickel(II) using autocatalytic reaction with sodium sulfite/hydrogen peroxide system and its application to the length detection-flow analysis

Trace amounts of nickel(II) can function as a trigger (=reaction initiator) in an autocatalytic reaction with the sodium sulfite/hydrogen peroxide system. Based on this finding, sub-μg L⁻¹ levels of nickel(II) were determined by a time measurement using the autocatalytic reaction. The detection range using the above method was 10⁻⁹–10⁻⁵ M, the detection limit (3σ) was 8.1 × 10⁻¹⁰ M (0.047 μg L⁻¹), and the relative standard deviation was 2.66% at nickel(II) concentration of 10⁻⁷ M (n = 7). This method was applied to length detection-flow injection analysis. The detection range for the flow injection analysis was 2 × 10⁻⁹–2 × 10⁻³ M. The detection limit (3σ) was 1.4 × 10⁻⁹ M (0.082 μg L⁻¹), and the relative standard deviation was 1.86 at initial nickel(II) concentration of 10⁻⁶ M (n = 7).     

Refined heat capacity of LaPO4 in the temperature range 0–1600 K

In the present work temperature dependence of heat capacity of cesium tantalum tungsten oxide has been measured first in the range from 7 to 350 K and then between 330 and 630 K, respectively, by precision adiabatic vacuum and dynamic calorimetry. The experimental data were used to calculate standard thermodynamic functions, namely the heat capacity C_p° (T), enthalpy H°(T) − H°(0), entropy S°(T) − S°(0) and Gibbs function G°(T) − H°(0), for the range from T → 0 to 630 K. The structure of CsTaWO₆ is refined by the Rietveld method: space group F d3m, Z = 8, a = 10.3793(2) Å, V = 1118.14(4) Å³. The high-temperature X-ray diffraction was used for the determination of temperature of phase transition and coefficient of thermal expansion.