共查询到20条相似文献,搜索用时 46 毫秒
1.
In this work, we make use of numerical experiments to explore our original theoretical analysis of two-phase flow in heterogeneous porous media (Quintard and Whitaker, 1988). The calculations were carried out with a two-region model of a stratified system, and the parameters were chosen be consistent with practical problems associated with groundwater flows and petroleum reservoir recovery processes. The comparison between theory (the large-scaled averaged equations) and experiment (numerical solution of the local volume averaged equations) has allowed us to identify conditions for which the quasi-static theory is acceptable and conditions for which a dynamic theory must be used. Byquasi-static we mean the following: (1) The local capillary pressure,everywhere in the averaging volume, can be set equal to the large-scale capillary pressure evaluated at the centroid of the averaging volume and (2) the large-scale capillary pressure is given by the difference between the large-scale pressures in the two immiscible phases, and is therefore independent of gravitational effects, flow effects and transient effects. Bydynamic, we simply mean a significant departure from the quasi-static condition, thus dynamic effects can be associated with gravitational effects, flow effects and transient effects. To be more precise about the quasi-static condition we need to refer to the relation between the local capillary pressure and the large-scale capillary pressure derived in Part I (Quintard and Whitaker, 1990).
Herep
c
¦y represents the local capillary pressure evaluated at a positiony relative to the centroid of the large-scale averaging volume, and {p
c
}¦x represents the large-scale capillary pressure evaluated at the centroid.In addition to{p
c
}
c
being evaluated at the centroid, all averaged terms on the right-hand side of Equation (1) are evaluated at the centroid. We can now write the equations describing the quasi-static condition as
,
, This means that the fluids within an averaging volume are distributed according to the capillary pressure-saturation relationwith the capillary pressure held constant. It also means that the large-scale capillary pressure is devoid of any dynamic effects. Both of these conditions represent approximations (see Section 6 in Part I) and one of our main objectives in this paper is to learn something about the efficacy of these approximations. As a secondary objective we want to explore the influence of dynamic effects in terms of our original theory. In that development only the first four terms on the right hand side of Equation (1) appeared in the representation for the local capillary pressure. However, those terms will provide an indication of the influence of dynamic effects on the large-scale capillary pressure and the large-scale permeability tensor, and that information provides valuable guidance for future studies based on the theory presented in Part I.Roman Letters
A
scalar that maps {}*/t onto
-
A
scalar that maps {}*/t onto
-
A
interfacial area between the -region and the -region contained within, m2
-
A
interfacial area between the -region and the -region contained within, m2
-
A
interfacial area between the -region and the -region contained within, m2
-
a
vector that maps ({}*/t) onto
, m
-
a
vector that maps ({}*/t) onto
, m
-
b
vector that maps ({p}–
g) onto
, m
-
b
vector that maps ({p}–
g) onto
, m
-
B
second order tensor that maps ({p}–
g) onto
, m2
-
B
second order tensor that maps ({p}–
g) onto
, m2
-
c
vector that maps ({}*/t) onto
, m
-
c
vector that maps ({}*/t) onto
, m
-
C
second order tensor that maps ({}*/t) onto
, m2
-
C
second order tensor that maps ({}*/t) onto
. m2
-
D
third order tensor that maps (
) onto
, m
-
D
third order tensor that maps (
) onto
, m
-
D
second order tensor that maps (
) onto
, m2
-
D
second order tensor that maps (
) onto
, m2
-
E
third order tensor that maps () onto
, m
-
E
third order tensor that maps () onto
, m
-
E
second order tensor that maps () onto
-
E
second order tensor that maps () onto
-
p
c
=(), capillary pressure relationship in the-region
-
p
c
=(), capillary pressure relationship in the-region
-
g
gravitational vector, m/s2
-
largest of either or
-
-
-
i
unit base vector in thex-direction
-
I
unit tensor
-
K
local volume-averaged-phase permeability, m2
-
K
local volume-averaged-phase permeability in the-region, m2
-
K
local volume-averaged-phase permeability in the-region, m2
- {K
}
large-scale intrinsic phase average permeability for the-phase, m2
-
K
–{K
}, large-scale spatial deviation for the-phase permeability, m2
-
K
–{K
}, large-scale spatial deviation for the-phase permeability in the-region, m2
-
K
–{K
}, large-scale spatial deviation for the-phase permeability in the-region, m2
-
K
*
large-scale permeability for the-phase, m2
-
L
characteristic length associated with local volume-averaged quantities, m
-
characteristic length associated with large-scale averaged quantities, m
-
I
i
i = 1, 2, 3, lattice vectors for a unit cell, m
-
l
characteristic length associated with the-region, m
-
;
characteristic length associated with the-region, m
-
l
H
characteristic length associated with a local heterogeneity, m
-
-
n
unit normal vector pointing from the-region toward the-region (n
=–n
)
-
n
unit normal vector pointing from the-region toward the-region (n
=–n
)
-
p
pressure in the-phase, N/m2
- p
local volume-averaged intrinsic phase average pressure in the-phase, N/m2
- {p
}
large-scale intrinsic phase average pressure in the capillary region of the-phase, N/m2
- p
local volume-averaged intrinsic phase average pressure for the-phase in the-region, N/m2
- p
local volume-averaged intrinsic phase average pressure for the-phase in the-region, N/m2
-
p
–{p
}, large scale spatial deviation for the-phase pressure, N/m2
-
p
–{p
}, large scale spatial deviation for the-phase pressure in the-region, N/m2
-
p
–{p
}, large scale spatial deviation for the-phase pressure in the-region, N/m2
-
P
c
p
–{p
}, capillary pressure, N/m2
- {pc}c
large-scale capillary pressure, N/m2
-
r
0
radius of the local averaging volume, m
-
R
0
radius of the large-scale averaging volume, m
-
r
position vector, m
-
, m
-
S
/, local volume-averaged saturation for the-phase
-
S
*
{}*{}*, large-scale average saturation for the-phaset time, s
-
t
time, s
-
u
, m
-
U
, m2
-
v
-phase velocity vector, m/s
- v
local volume-averaged phase average velocity for the-phase in the-region, m/s
- v
local volume-averaged phase average velocity for the-phase in the-region, m/s
- {v
}
large-scale intrinsic phase average velocity for the-phase in the capillary region of the-phase, m/s
- {v
}
large-scale phase average velocity for the-phase in the capillary region of the-phase, m/s
-
v
–{v
}, large-scale spatial deviation for the-phase velocity, m/s
-
v
–{v
}, large-scale spatial deviation for the-phase velocity in the-region, m/s
-
v
–{v
}, large-scale spatial deviation for the-phase velocity in the-region, m/s
-
V
local averaging volume, m3
-
V
volume of the-phase in, m3
-
V
large-scale averaging volume, m3
-
V
capillary region for the-phase within, m3
-
V
capillary region for the-phase within, m3
-
V
c
intersection of m3
-
V
volume of the-region within, m3
-
V
volume of the-region within, m3
-
V
()
capillary region for the-phase within the-region, m3
-
V
()
capillary region for the-phase within the-region, m3
-
V
()
, region in which the-phase is trapped at the irreducible saturation, m3
-
y
position vector relative to the centroid of the large-scale averaging volume, m
Greek Letters
local volume-averaged porosity
-
local volume-averaged volume fraction for the-phase
-
local volume-averaged volume fraction for the-phase in the-region
-
local volume-averaged volume fraction for the-phase in the-region
-
local volume-averaged volume fraction for the-phase in the-region (This is directly related to the irreducible saturation.)
- {}
large-scale intrinsic phase average volume fraction for the-phase
- {}
large-scale phase average volume fraction for the-phase
- {}*
large-scale spatial average volume fraction for the-phase
-
–{}, large-scale spatial deviation for the-phase volume fraction
-
–{}, large-scale spatial deviation for the-phase volume fraction in the-region
-
–{}, large-scale spatial deviation for the-phase volume fraction in the-region
-
a generic local volume-averaged quantity associated with the-phase
-
mass density of the-phase, kg/m3
-
mass density of the-phase, kg/m3
-
viscosity of the-phase, N s/m2
-
viscosity of the-phase, N s/m2
-
interfacial tension of the - phase system, N/m
-
, N/m
-
, volume fraction of the-phase capillary (active) region
-
, volume fraction of the-phase capillary (active) region
-
, volume fraction of the-region (
+
=1)
-
, volume fraction of the-region (
+
=1)
-
{p
}–
g, N/m3
-
{p
}–
g, N/m3 相似文献
2.
SEBASTIAN Şlicaru 《Journal of Elasticity》1997,46(1):33-42
We consider a surface S = (), where 2 is a bounded, connected, open set with a smooth boundary and : 3 is a smooth map; let () denote the components of the two-dimensional linearized strain tensor of S and let 0 with length 0 > 0. We assume the the norm ,|| ()||0, in the space V0() = { H1() × H1() × L2(); = 0 on 0 } is equivalent to the usual product norm on this space. We then establish that this assumption implies that the surface S is uniformly elliptic and that we necessarily have 0 = . 相似文献
3.
Stephen Whitaker 《Transport in Porous Media》1986,1(1):3-25
Stokes flow through a rigid porous medium is analyzed in terms of the method of volume averaging. The traditional averaging procedure leads to an equation of motion and a continuity equation expressed in terms of the volume-averaged pressure and velocity. The equation of motion contains integrals involving spatial deviations of the pressure and velocity, the Brinkman correction, and other lower-order terms. The analysis clearly indicates why the Brinkman correction should not be used to accommodate ano slip condition at an interface between a porous medium and a bounding solid surface.The presence of spatial deviations of the pressure and velocity in the volume-averaged equations of motion gives rise to aclosure problem, and representations for the spatial deviations are derived that lead to Darcy's law. The theoretical development is not restricted to either homogeneous or spatially periodic porous media; however, the problem ofabrupt changes in the structure of a porous medium is not considered.Roman Letters
A
interfacial area of the - interface contained within the macroscopic system, m2
-
A
e
area of entrances and exits for the -phase contained within the macroscopic system, m2
- A
interfacial area of the - interface contained within the averaging volume, m2
- A
*
interfacial area of the - interface contained within a unit cell, m2
- Ae
area of entrances and exits for the -phase contained within a unit cell, m2
-
B
second order tensor used to represent the velocity deviation (see Equation (3.30))
-
b
vector used to represent the pressure deviation (see Equation (3.31)), m–1
-
d
distance between two points at which the pressure is measured, m
-
g
gravity vector, m/s2
-
K
Darcy's law permeability tensor, m2
-
L
characteristic length scale for volume averaged quantities, m
-
characteristic length scale for the -phase (see Figure 2), m
-
characteristic length scale for the -phase (see Figure 2), m
-
n
unit normal vector pointing from the -phase toward the -phase (n
=–n
)
-
n
e
unit normal vector for the entrances and exits of the -phase contained within a unit cell
-
p
pressure in the -phase, N/m2
- p
intrinsic phase average pressure for the -phase, N/m2
-
p
–p
, spatial deviation of the pressure in the -phase, N/m2
-
r
0
radius of the averaging volume and radius of a capillary tube, m
-
v
velocity vector for the -phase, m/s
- v
phase average velocity vector for the -phase, m/s
- v
intrinsic phase average velocity vector for the -phase, m/s
-
v
–v
, spatial deviation of the velocity vector for the -phase, m/s
-
V
averaging volume, m3
- V
volume of the -phase contained within the averaging volume, m3
Greek Letters
V/V, volume fraction of the -phase
-
mass density of the -phase, kg/m3
-
viscosity of the -phase, Nt/m2
-
arbitrary function used in the representation of the velocity deviation (see Equations (3.11) and (B1)), m/s
-
arbitrary function used in the representation of the pressure deviation (see Equations (3.12) and (B2)), s–1 相似文献
4.
Since the temperature is not an additive function, the traditional thermodynamic point of view suggests that the volume integral of the temperature has no precise physical meaning. This observation conflicts with the customary analysis of non-isothermal catalytic reactors, heat pipes, driers, geothermal processes, etc., in which the volume averaged temperature plays a crucial role. In this paper we identify the thermodynamic significance of the volume averaged temperature in terms of a simple two-phase heat transfer process. Given the internal energy as a function of the point temperature and the density
we show that the volume averaged internal energy is represented by
e
= F(T
,
)when e
is a linear function of T
and , or when the traditional length-scale constraints associated with the method of volume averaging are satisfied. When these conditions are not met, higher order terms involving the temperature gradient and the density gradient appear in the representation for e
. 相似文献
5.
The effective length method [1, 2] has been used to make systematic calculations of the heat transfer for laminar and turbulent boundary layers on slender blunt-nosed cones at small angles of attack ( + 5° in a separationless hypersonic air stream dissociating in equilibrium (half-angles of the cones 0 20°, angles of attack 0 15°, Mach numbers 5 M 25). The parameters of the gas at the outer edge of the boundary layer were taken equal to the inviscid parameters on the surface of the cones. Analysis of the results leads to simple approximate dependences for the heat transfer coefficients.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 173–177, September–October, 1981. 相似文献
6.
Stephen Whitaker 《Transport in Porous Media》1986,1(2):105-125
The Stokes flow of two immiscible fluids through a rigid porous medium is analyzed using the method of volume averaging. The volume-averaged momentum equations, in terms of averaged quantities and spatial deviations, are identical in form to that obtained for single phase flow; however, the solution of the closure problem gives rise to additional terms not found in the traditional treatment of two-phase flow. Qualitative arguments suggest that the nontraditional terms may be important when
/
is of order one, and order of magnitude analysis indicates that they may be significant in terms of the motion of a fluid at very low volume fractions. The theory contains features that could give rise to hysteresis effects, but in the present form it is restricted to static contact line phenomena.Roman Letters (, = , , and )
A
interfacial area of the- interface contained within the macroscopic system, m2
-
A
e
area of entrances and exits for the -phase contained within the macroscopic system, m2
-
A
interfacial area of the- interface contained within the averaging volume, m2
-
A
*
interfacial area of the- interface contained within a unit cell, m2
-
A
e
*
area of entrances and exits for the-phase contained within a unit cell, m2
-
g
gravity vector, m2/s
-
H
mean curvature of the- interface, m–1
- H
area average of the mean curvature, m–1
-
H – H
, deviation of the mean curvature, m–1
-
I
unit tensor
-
K
Darcy's law permeability tensor, m2
-
K
permeability tensor for the-phase, m2
-
K
viscous drag tensor for the-phase equation of motion
-
K
viscous drag tensor for the-phase equation of motion
-
L
characteristic length scale for volume averaged quantities, m
-
characteristic length scale for the-phase, m
-
n
unit normal vector pointing from the-phase toward the-phase (n
= –n
)
-
p
c
p
– P
, capillary pressure, N/m2
-
p
pressure in the-phase, N/m2
- p
intrinsic phase average pressure for the-phase, N/m2
-
p
– p
, spatial deviation of the pressure in the-phase, N/m2
-
r
0
radius of the averaging volume, m
-
t
time, s
-
v
velocity vector for the-phase, m/s
- v
phase average velocity vector for the-phase, m/s
- v
intrinsic phase average velocity vector for the-phase, m/s
-
v
– v
, spatial deviation of the velocity vector for the-phase, m/s
-
V
averaging volume, m3
-
V
volume of the-phase contained within the averaging volume, m3
Greek Letters
V
/V, volume fraction of the-phase
-
mass density of the-phase, kg/m3
-
viscosity of the-phase, Nt/m2
-
surface tension of the- interface, N/m
-
viscous stress tensor for the-phase, N/m2
-
/
kinematic viscosity, m2/s 相似文献
7.
In this paper we develop the averaged form of the Stokes equations in terms of weighting functions. The analysis clearly indicates at what point one must choose a media-specific weighting function in order to achieve spatially smoothed transport equations. The form of the weighting function that produces the cellular average is derived, and some important geometrical theorems are presented.Roman Letters
A
interfacial area of the- interface associated with the local closure problem, m2
-
A
e
area of entrances and exits for the-phase contained within the averaging system, m2
-
A
p
surface area of a particle, m2
-
d
p
6V
p/Ap, effective particle diameter, m
-
g
gravity vector, m/s2
-
I
unit tensor
-
K
m
permeability tensor for the weighted average form of Darcy's law, m2
-
L
general characteristic length for volume averaged quantities, m
-
L
p
general characteristic length for volume averaged pressure, m
-
L
characteristic length for the porosity, m
-
L
v
characteristic length for the volume averaged velocity, m
-
l
characteristic length (pore scale) for the-phase
-
l
i
i=1, 2, 3 lattice vectors, m
-
(y)
weighting function
-
m(–y)
(y), convolution product weighting function
-
v
special weighting function associated with the traditional averaging volume
-
m
v
special convolution product weighting function associated with the traditional averaging volume
-
m
g
general convolution product weighting function
-
m
V
unit cell convolution product weighting function
-
m
C
special convolution product weighting function for ordered media which produces the cellular average
-
m
D
special convolution product weighting function for disordered media
-
m
M
master convolution product weighting function for ordered and disordered media
-
n
unit normal vector pointing from the-phase toward the-phase
-
p
pressure in the-phase, N/m2
- pm
superficial weighted average pressure, N/m2
- p
m
intrinsic weighted average pressure, N/m2
- p
traditional intrinsic volume averaged pressure, N/m2
- p
p p
m
, spatial deviation pressure, N/m2
-
r
0
radius of a spherical averaging volume, m
-
r
m
support of the convolution product weighting function, m
-
r
position vector, m
-
r
position vector locating points in the-phase, m
-
V
averaging volume, m3
-
V
volume of the-phase contained in the averaging volume, m3
-
V
cell
volume of a unit cell, m3
-
V
velocity vector in the-phase, m/s
- vm
superficial weighted average velocity, m/s
- v
m
intrinsic weighted average velocity, m/s
-
V
volume of the-phase contained in the averaging volume, m3
-
V
p
volume of a particle, m3
- v
traditional superficial volume averaged velocity, m/s
-
v
v p
m
spatial deviation velocity, m/s
-
x
position vector locating the centroid of the averaging volume or the convolution product weighting function, m
-
y
position vector relative to the centroid, m
-
y
position vector locating points in the-phase relative to the centroid, m
Greek Letters
indicator function for the-phase
-
Dirac distribution associated with the- interface
-
V
/V, volume average porosity
- m
m * . weighted average porosity
-
mass density of the-phase, kg/m3
-
viscosity of the-phase, Ns/m2
-
V
/V, volume fraction of the-phase 相似文献
8.
Henri Bertin Michel Quintard Ph. Vincent Corpel Stephen Whitaker 《Transport in Porous Media》1990,5(6):543-590
Two-phase flow in stratified porous media is a problem of central importance in the study of oil recovery processes. In general, these flows are parallel to the stratifications, and it is this type of flow that we have investigated experimentally and theoretically in this study. The experiments were performed with a two-layer model of a stratified porous medium. The individual strata were composed of Aerolith-10, an artificial: sintered porous medium, and Berea sandstone, a natural porous medium reputed to be relatively homogeneous. Waterflooding experiments were performed in which the saturation field was measured by gamma-ray absorption. Data were obtained at 150 points distributed evenly over a flow domain of 0.1 × 0.6 m. The slabs of Aerolith-10 and Berea sandstone were of equal thickness, i.e. 5 centimeters thick. An intensive experimental study was carried out in order to accurately characterize the individual strata; however, this effort was hampered by both local heterogeneities and large-scale heterogeneities.The theoretical analysis of the waterflooding experiments was based on the method of large-scale averaging and the large-scale closure problem. The latter provides a precise method of discussing the crossflow phenomena, and it illustrates exactly how the crossflow influences the theoretical prediction of the large-scale permeability tensor. The theoretical analysis was restricted to the quasi-static theory of Quintard and Whitaker (1988), however, the dynamic effects described in Part I (Quintard and Whitaker 1990a) are discussed in terms of their influence on the crossflow.Roman Letters
A
interfacial area between the -region and the -region contained within V, m2
-
a
vector that maps
onto
, m
-
b
vector that maps
onto
, m
-
b
vector that maps
onto
, m
-
B
second order tensor that maps
onto
, m2
-
C
second order tensor that maps
onto
, m2
-
E
energy of the gamma emitter, keV
-
f
fractional flow of the -phase
- g
gravitational vector, m/s2
-
h
characteristic length of the large-scale averaging volume, m
-
H
height of the stratified porous medium
, m
-
i
unit base vector in the x-direction
-
K
local volume-averaged single-phase permeability, m2
-
K - {K}, large-scale spatial deviation permeability
-
{
K}
large-scale volume-averaged single-phase permeability, m2
-
K
*
large-scale single-phase permeability, m2
-
K
**
equivalent large-scale single-phase permeability, m2
-
K
local volume-averaged -phase permeability in the -region, m2
-
K
local volume-averaged -phase permeability in the -region, m2
-
K
- {K
}
, large-scale spatial deviation for the -phase permeability, m2
-
K
*
large-scale permeability for the -phase, m2
-
l
thickness of the porous medium, m
-
l
characteristic length for the -region, m
-
l
characteristic length for the -region, m
-
L
length of the experimental porous medium, m
-
characteristic length for large-scale averaged quantities, m
-
n
outward unit normal vector for the -region
-
n
outward unit normal vector for the -region
-
n
unit normal vector pointing from the -region toward the -region (n
= - n
)
-
N
number of photons
-
p
pressure in the -phase, N/m2
-
p
0
reference pressure in the -phase, N/m2
-
local volume-averaged intrinsic phase average pressure in the -phase, N/m2
-
large-scale volume-averaged pressure of the -phase, N/m2
-
large-scale intrinsic phase average pressure in the capillary region of the -phase, N/m2
-
-
, large-scale spatial deviation for the -phase pressure, N/m2
- pc
, capillary pressure, N/m2
-
p
c
capillary pressure in the -region, N/m2
-
p
capillary pressure in the -region, N/m2
- {p
c
}
c
large-scale capillary pressure, N/m2
-
q
-phase velocity at the entrance of the porous medium, m/s
-
q
-phase velocity at the entrance of the porous medium, m/s
- Swi
irreducible water saturation
-
S
/, local volume-averaged saturation for the -phase
-
S
i
initial saturation for the -phase
-
S
r
residual saturation for the -phase
-
S
*
{
}*/}*, large-scale average saturation for the -phase
-
S
saturation for the -phase in the -region
-
S
saturation for the -phase in the -region
-
t
time, s
-
v
-phase velocity vector, m/s
- v
local volume-averaged phase average velocity for the -phase, m/s
- {v
}
large-scale averaged velocity for the -phase, m/s
- v
local volume-averaged phase average velocity for the -phase in the -region, m/s
- v
local volume-averaged phase average velocity for the -phase in the -region, m/s
-
v
-{v
}
, large-scale spatial deviation for the -phase velocity, m/s
-
v
-{v
}
, large-scale spatial deviation for the -phase velocity in the -region, m/s
-
v
-{v
}
, large-scale spatial deviation for the -phase velocity in the -region, m/s
-
V
large-scale averaging volume, m3
-
y
position vector relative to the centroid of the large-scale averaging volume, m
- {y}c
large-scale average of y over the capillary region, m
Greek Letters
local porosity
-
local porosity in the -region
-
local porosity in the -region
-
local volume fraction for the -phase
-
local volume fraction for the -phase in the -region
-
local volume fraction for the -phase in the -region
- {}*
{
}*+{
}*, large-scale spatial average volume fraction
- {
}*
large-scale spatial average volume fraction for the -phase
-
mass density of the -phase, kg/m3
-
mass density of the -phase, kg/m3
-
viscosity of the -phase, N s/m2
-
viscosity of the -phase, Ns/m2
-
V
/V
, volume fraction of the -region (
+
=1)
-
V
/V
, volume fraction of the -region (
+
=1)
-
attenuation coefficient to gamma-rays, m-1
-
-
相似文献
9.
The pseudoplastic flow of suspensions, alumina or styrene-acrylamide copolymer particles in water or an aqueous solution of glycerin has been studied by the step-shear-rate method. The relation between the shear rate,D, and the shear stress,, in the step-shear-rate measurements, where the state of dispersion was considered to be constant, was expressed as = AD
1/2 +CD. The effective solid volume fraction,ø
F, andA were dependent on the shear rate and expressed byø
F =aD
b andA = D
. Combining the above relations, the steady flow curve was expressed by = D
1/2 + +
0 (1 – a D
b/0.74)–1.85
D, where
0 is the viscosity of the medium.With an increase in solid volume fraction and a decreases in the absolute value of the-potential, the flow behavior of the suspensions changed from Newtonian ( = = b = 0), slightly pseudoplastic ( = b = 0), pseudoplastic ( = 0) to a Bingham-like behavior.The change in viscosity of the medium had an effect on the change in the effective volume fraction. 相似文献
10.
In a previous derivation of Darcy's law, the closure problem was presented in terms of an integro-differential equation for a second-order tensor. In this paper, we show that the closure problem can be transformed to a set of Stokes-like equations and we compare solutions of these equations with experimental data. The computational advantages of the transformed closure problem are considerable.Roman Letters
A
interfacial area of the- interface contained within the macroscopic system, m2
-
A
e
area of entrances and exits for the-phase contained within the macroscopic system, m2
-
A
interfacial area of the- interface contained within the averaging volume, m2
-
A
e
area of entrances and exits for the-phase contained within the averaging volume, m2
-
B
second-order tensor used to respresent the velocity deviation
-
b
vector used to represent the pressure deviation, m–1
-
C
second-order tensor related to the permeability tensor, m–2
-
D
second-order tensor used to represent the velocity deviation, m2
-
d
vector used to represent the pressure deviation, m
-
g
gravity vector, m/s2
-
I
unit tensor
-
K
C
–1,–D, Darcy's law permeability tensor, m2
-
L
characteristic length scale for volume averaged quantities, m
-
characteristic length scale for the-phase, m
-
l
i
i=1, 2, 3, lattice vectors, m
-
n
unit normal vector pointing from the-phase toward the-phase
-
n
e
outwardly directed unit normal vector at the entrances and exits of the-phase
-
p
pressure in the-phase, N/m
2
- p
intrinsic phase average pressure, N/m2
-
p
–p
, spatial deviation of the pressure in the-phase, N/m2
-
r
position vector locating points in the-phase, m
-
r
0
radius of the averaging volume, m
-
t
time, s
-
v
velocity vector in the-phase, m/s
- v
intrinsic phase average velocity in the-phase, m/s
- v
phase average or Darcy velocity in the \-phase, m/s
-
v
–v
, spatial deviation of the velocity in the-phase m/s
-
V
averaging volume, m3
-
V
volume of the-phase contained in the averaging volume, m3
Greek Letters
V
/V volume fraction of the-phase
-
mass density of the-phase, kg/m3
-
viscosity of the-phase, Nt/m2 相似文献
11.
Correlations between porous medium flow data and turbulent tube flow results for aqueous hydroxypropylguar solutions (Part 2) 总被引:1,自引:0,他引:1
Turbulent tube flow and the flow through a porous medium of aqueous hydroxypropylguar (HPG) solutions in concentrations from 100 wppm to 5000 wppm is investigated. Taking the rheological flow curves into account reveals that the effectiveness in turbulent tube flow and the efficiency for the flow through a porous medium both start at the same onset wall shear stress of 1.3 Pa. The similarity of the curves = (
w
) and = (
w
), respectively, leads to a simple linear relation / =k, where the constantk or proportionality depends uponc. This offers the possibility to deduce (for turbulent tube flow) from (for flow through a porous medium). In conjunction with rheological data, will reveal whether, and if yes to what extent, drag reduction will take place (even at high concentrations).The relation of our treatment to the model-based Deborah number concept is shown and a scale-up formula for the onset in turbulent tube flow is deduced as well. 相似文献
12.
Tommy Gustafsson 《Archive for Rational Mechanics and Analysis》1986,92(1):23-57
This paper studies Lp-estimates for solutions of the nonlinear, spatially homogeneous Boltzmann equation. The molecular forces considered include inverse kth-power forces with k > 5 and angular cut-off.The main conclusions are the following. Let f be the unique solution of the Boltzmann equation with f(v,t)(1 + ¦v2¦)(s
1
+ /p)/2 L1, when the initial value f
0 satisfies f
0(v) 0, f
0(v) (1 + ¦v¦2)(s
1
+ /p)/2 L1, for some s1 2 + /p, and f
0(v) (1 + ¦v¦2)s/2 Lp. If s 2/p and 1 < p < , then f(v, t)(1 + ¦v¦2)(s s
1)/2 Lp, t > 0. If s >2 and 3/(1+ ) < p < , thenf(v,t) (1 + ¦v¦2)(s(s
1
+ 3/p))/2 Lp, t > 0. If s >2 + 2C0/C1 and 3/(l + ) < p < , then f(v,t)(1 + ¦v¦2)s/2 Lp, t > 0. Here 1/p + 1/p = 1, x y = min (x, y), and C0, C1, 0 < 1, are positive constants related to the molecular forces under consideration; = (k – 5)/ (k – 1) for kth-power forces.Some weaker conclusions follow when 1 < p 3/ (1 + ).In the proofs some previously known L-estimates are extended. The results for Lp, 1 < p < , are based on these L-estimates coupled with nonlinear interpolation. 相似文献
13.
S. A. Bostandzhyan A. G. Merzhanov S. I. Khudyaev 《Journal of Applied Mechanics and Technical Physics》1965,6(5):30-33
The paper presents solutions to the problems of plane Couette flow, axial flow in an annulus between two infinite cylinders, and flow between two rotating cylinders. Taking into account energy dissipation and the temperature dependence of viscosity, as given by Reynolds's relation =0 exp (–T) (0, =const). Two types of boundary conditions are considered: a) the two surfaces are held at constant (but in general not equal) temperatures; b) one surface is held at a constant temperature, the other surface is insulated.Nonisothermal steady flow in simple conduits with dissipation of energy and temperature-dependent viscosity has been studied by several authors [1–11]. In most of these papers [1–6] viscosity was assumed to be a hyperbolic function of temperature, viz. =m 1/1+2(T–Tm.Under this assumption the energy equation is linear in temperature and can he easily integrated. Couette flow with an exponential viscosity-temperature relation. =0
e
–T
(0, =const), (0.1) was studied in [7, 8]. Couette flow with a general (T) relation was studied in (9).Forced flow in a plane conduit and in a circular tube with a general (T) relation was studied in [10]. In particular, it has been shown in [10] that in the case of sufficiently strong dependence of viscosity on temperature there can exist a critical value of the pressure gradient, such that a steady flow is possible only for pressure gradients below this critical value.In a previous work [11] the authors studied Polseuille flow in a circular tube with an exponential (T) relation. This thermohydrodynamic problem was reduced to the problem of a thermal explosion in a cylindrical domain, which led to the existence of a critical regime. The critical conditions for the hydrodynamic thermal explosion and the temperature and velocity profiles were calculated.In this paper we treat the problems of Couette flow, pressureless axial flow in an annulus, and flow between two rotating cylinders taking into account dissipation and the variation of viscosity with temperature according to Reynolds's law (0.1). The treatment of the Couette flow problem differs from that given in [8] in that the constants of integration are found by elementary methods, whereas in [8] this step involved considerable difficulties. The solution to the two other problems is then based on the Couette problem. 相似文献
14.
In this paper we examine the closure problem associated with the volume averaged form of the Stokes equations presented in Part II. For both ordered and disordered porous media, we make use of a spatially periodic model of a porous medium. Under these circumstances the closure problem, in terms of theclosure variables, is independent of the weighting functions used in the spatial smoothing process. Comparison between theory and experiment suggests that the geometrical characteristics of the unit cell dominate the calculated value of the Darcy's law permeability tensor, whereas the periodic conditions required for thelocal form of the closure problem play only a minor role.Roman Letters
A
interfacial area of the- interface contained within the macroscopic region, m2
-
A
e
area of entrances and exits for the-phase contained within the macroscopic system, m2
-
A
interfacial area of the- interface associated with the local closure problem, m2
-
A
p
surface area of a particle, m2
-
b
vector used to represent the pressure deviation, m–1
-
B
0
B+I, a second order tensor that maps v
m
ontov
- B
second-order tensor used to represent the velocity deviation
- d
p
6V
p/Ap, effective particle diameter, m
-
d
a vector related to the pressure, m
-
D
a second-order tensor related to the velocity, m2
-
g
gravity vector, m/s2
-
I
unit tensor
-
K
traditional Darcy's law permeability tensor calculated on the basis of a spatially periodic model, m2
-
K
m
permeability tensor for the weighted average form of Darcy's law, m2
-
L
general characteristic length for volume averaged quantities, m
-
L
p
characteristic length for the volume averaged pressure, m
-
L
characteristic length for the porosity, m
-
L
v
characteristic length for the volume averaged velocity, m
-
characteristic length (pore scale) for the-phase
-
i
i=1, 2, 3 lattice vectors, m
-
weighting function
-
m(-y)
, convolution product weighting function
-
m
v
special convolution product weighting function associated with the traditional averaging volume
-
m
g
general convolution product weighting function
-
m
V
unit cell convolution product weighting function
-
m
C
special convolution product weighting function for ordered media which produces the cellular average
-
n
unit normal vector pointing from the-phase toward the -phase
-
p
pressure in the-phase, N/m2
- p
m
superficial weighted average pressure, N/m2
- p
m
intrinsic weighted average pressure, N/m2
- p
traditional intrinsic volume averaged pressure, N/m2
-
p
–
p
m
, spatial deviation pressure, N/m2
-
r
0
radius of a spherical averaging volume, m
-
r
m
support of the convolution product weighting function
-
r
position vector, m
-
r
position vector locating points in the-phase, m.
-
V
averaging volume, m3
-
B
volume of the-phase contained in the averaging volume, m3
-
V
cell
volume of a unit cell, m3
-
v
velocity vector in the-phase, m/s
- v
m
superficial weighted average velocity, m/s
- v
m
intrinsic weighted average velocity, m/s
- v
traditional superficial volume averaged velocity, m/s
-
v
–
v
m
, spatial deviation velocity, m/s
-
x
position vector locating the centroid of the averaging volume or the convolution product weighting function, m
-
y
position vector relative to the centroid, m
-
y
position vector locating points in the -phase relative to the centroid, m
Greek Letters
indicator function for the-phase
-
Dirac distribution associated with the- interface
-
V
/V, volume average porosity
-
m
m * , weighted average porosity
-
mass density of the-phase, kg/m3
-
viscosity of the-phase, Ns/m2 相似文献
15.
Dr. P. Ray Mr. S. K. Bayen Dr. B. K. Dutta Dr. A. S. Gupta 《Heat and Mass Transfer》1988,22(3-4):195-199
Zusammenfassung Es wird eine analytische Lösung für die Absorption in einem laminaren Rieselfilm mit homogener und heterogener chemischer Reaktion 1. Ordnung vorgestellt, wobei der Stofftransportwiderstand auf der Gasseite liegt. Die Lösung ist eine Funktion von drei dimensionslosen ParameternBi, und, welche die BiotZahl und einen homogenen bzw. heterogenen Reaktionsparameter darstellen. Es wird gezeigt, daß für feste Werte vonBi und die Absorptionsrate (bezogen auf die Breite 1 des Rieselfilms) über eine gewisse Länge (dimensionslos) des Rieselfilms unabhängig von ist, wenn, < 0,6 ist. Die laufende Länge wird von der Stelle aus gemessen, an der die Absorption beginnt. Für b 0,6 nimmt der FlußQ mit zu, erreicht aber einen Sättigungswert bei=10, wonachQ nurmehr sehr langsam anwächst. Jedoch für ein gegebenes und ohne Übergangswiderstand im Film (Bi ) nimmtQ mit für alle 0 zu.
Mass transfer with chemical reaction in a laminar falling film
An analytical solution is presented for gas absorption in a laminar falling film with first-order homogeneous and heterogeneous chemical reaction and external gas-phase mass transfer resistance. The solution depends on three dimensionless parametersBi, and, wich represent the Biot number, homogeneous and heterogeneous reaction parameters, respectively. It is shown that for fixed values ofBi and, the rate of gas absorption (per unit breadth) over a certain length; (dimensionless) along the falling film measured from the point where surface absorption begins is independent of if < 0.6. For 0.6, this fluxQ increases with but reaches a saturation value at=10 beyond whichQ increases very slowly. But for given and zero gas film resistance (Bi ),Q increases with for all 0.相似文献
16.
Shock-induced yield enhancement has been observed in implantation of recoil atoms into metallocene and its-cyclodextrin (CD) inclusion compounds, as in the case of metal-diketonate compounds previously studied. The enhancement, however, occurs at much lower energy compared with that in metal-diketonates. In acetylruthenocene and benzoylruthenocene--CD inclusion compounds, various aspects of molecular rocket reaction have been discussed.This article was processed by the author using Springer-Verlag TEX PJour2g macro package version 1. 相似文献
17.
In this paper we continue the geometrical studies of computer generated two-phase systems that were presented in Part IV. In order to reduce the computational time associated with the previous three-dimensional studies, the calculations presented in this work are restricted to two dimensions. This allows us to explore more thoroughly the influence of the size of the averaging volume and to learn something about the use of anon-representative region in the determination of averaged quantities.
Nomenclature
Roman Letters A interfacial area of the– interface associated with the local closure problem, m2 - a i i=1, 2, gaussian probability distribution used to locate the position of particles - l unit tensor - characteristic length for the-phase particles, m - 0 reference characteristic length for the-phase particles, m - characteristic length for the-phase, m - i i=1,2,3 lattice vectors, m - m convolution product weighting function - m V special convolution product weighting function associated with a unit cell - n i i=1, 2 integers used to locate the position of particles - n unit normal vector pointing from the-phase toward the-phase - r p position vector locating the centroid of a particle, m - r gaussian probability distribution used to determine the size of a particle, m - r 0 characteristic length of an averaging region, m - V averaging volume, m3 - V volume of the-phase contained in the averaging volume,V, m3 - x position of the centroid of an averaging area, m - x 0 reference position of the centroid of an averaging area, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters V /V, volume average porosity - a i standard deviation ofa i - r standard deviation ofr - intrinsic phase average of 相似文献18.
The dissolution of a system of CO2 bubbles in water and aqueous solutions of dextrose has been studied experimentally. The interfacial surface area is calculated, and the mass-transfer coefficient is determined. A relation is found among, the bubble diameter, the physical properties of the liquid, and the rate at which the gas is bubbled through the liquid. A criterial equation is proposed for. 相似文献
19.
K. A. Mørch 《Applied Scientific Research》1982,38(1):313-321
A general equation for the energy balance in a liquid containing a cluster of cavities is used to derive the collapse equations for specific cluster configurations. These equations contain as parameters the volume fraction of cavities and a coefficient for the energy transfer into the cluster due to collapse of the individual cavities. The influence of and and of the spatial distribution of is calculated. Experimental studies of the plane, one-dimensional collapse of a cavity layer are compared with the theoretical results. In this connection the influence of temperature on the cavity cluster formation and collapse is considered. 相似文献
20.
In the method of volume averaging, the difference between ordered and disordered porous media appears at two distinct points in the analysis, i.e. in the process of spatial smoothing and in the closure problem. In theclosure problem, the use of spatially periodic boundary conditions isconsistent with ordered porous media and the fields under consideration when the length-scale constraint,r
0L is satisfied. For disordered porous media, spatially periodic boundary conditions are an approximation in need of further study.In theprocess of spatial smoothing, average quantities must be removed from area and volume integrals in order to extractlocal transport equations fromnonlocal equations. This leads to a series of geometrical integrals that need to be evaluated. In Part II we indicated that these integrals were constants for ordered porous media provided that the weighting function used in the averaging process contained thecellular average. We also indicated that these integrals were constrained by certain order of magnitude estimates for disordered porous media. In this paper we verify these characteristics of the geometrical integrals, and we examine their values for pseudo-periodic and uniformly random systems through the use of computer generated porous media.
Nomenclature
Roman Letters A interfacial area of the- interface associated with the local closure problem, m2 - A e area of entrances and exits for the-phase contained within the averaging system, m2 - a i i=1, 2, 3 gaussian probability distribution used to locate the position of particles - I unit tensor - L general characteristic length for volume averaged quantities, m - L characteristic length for , m - L characteristic length for , m - characteristic length for the -phase particles, m - 0 reference characteristic length for the-phase particles, m - characteristic length for the-phase, m - i i=1, 2, 3 lattice vectors, m - m convolution product weighting function - m v special convolution product weighting function associated with the traditional volume average - n i i=1, 2, 3 integers used to locate the position of particles - n unit normal vector pointing from the-phase toward the-phase - n e outwardly directed unit normal vector at the entrances and exits of the-phase - r p position vector locating the centroid of a particle, m - r gaussian probability distribution used to determine the size of a particle, m - r 0 characteristic length of an averaging region, m - r position vector, m - r m support of the weighting functionm, m - averaging volume, m3 - V volume of the-phase contained in the averaging volume,, m3 - x positional vector locating the centroid of an averaging volume, m - x 0 reference position vector associated with the centroid of an averaging volume, m - y position vector locating points relative to the centroid, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters indicator function for the-phase - Dirac distribution associated with the- interface - V /V, volume average porosity - /L, small parameter in the method of spatial homogenization - standard deviation ofa i - r standard deviation ofr - r intrinsic phase average of 相似文献