HPLC profile of captopril disulfide that undergoes reversible cis-trans conversion among three isomers.

Peculiarly shaped chromatograms of some compounds that consist of two reversible isomers have been reported. Those of a compound that consists of three reversible isomers are described here. Because disulfide of captopril has two cis-trans convertible bonds, it exists in three forms of cis-cis, cis-trans and trans-trans isomers. The disulfide has produced various HPLC-UV profiles under various conditions, such as three split peaks, three peaks with bridging plateaus and one broad peak. The effect of the column temperature and the eluent flow rate on the profile was investigated and explained by interconversion among three isomers. A profile analysis could provide some kinetic constants of this reaction.     

Criteria for judging the quality of separation in chromatograms containing solvent peaks

Summary Formal procedures used for optimizing chromatographic selectivity require objective, numerical functions to assess the quality of each chromatogram obtained during the process. Many of such optimization criteria have been suggested for chromatograms in which all or a number of well-shaped peaks need to be separated. This paper describes a method by which resolution can be measured in chromatograms in which very large, highly non-symmetrical background peaks,e.g. typical solvent peaks, are present. Using this method, various optimization criteria can be calculated. The method is evaluated using a simulation program which constructs chromatograms from the recorded profiles of individual experimental peaks. It is also demonstrated for use in an experimental optimization procedure in reversed-phase liquid chromatography.     

Analysis of common fatty acid glycerides by gas chromatography

A method is described for the determination of 25 common fatty acid mono-, di-, and triglycerides and their components and mixtures by packed-column gas chromatography after isolation and derivatization. The method is applied to two commercial materials, a polypropylene resin and a hand lotion. The glycerides along with glycerol and free fatty acids are first separated from the host by refluxing with 2-propanol containing an internal standard. The extract is derivatized and the compounds are identified and measured by gas chromatography. The chromatograms show sharp peaks, unique retention times and reproducibility in the range of 2–5%. Several positional isomers of the fatty acid glycerides were tested but found not to be resolved under the conditions used. Optical isomers and cis-trans isomers of unsaturated acids were not tested.     

Identification of minor C18 triene and conjugated diene isomers in hydrogenated soybean oil and margarine by GC-MI-FT-IR spectroscopy

Vegetable oils are partially hydrogenated in order to produce palatable products of suitable plasticity. The constituents of these new dietary products are complex mixtures of fatty acid isomers with different nutritional properties. A rapid method is described for separating and identifying fatty acid methyl ester (FAME) isomers of linolenic (octadecatrienoic, 18:3) acid and of conjugated octadecadienoic (18:2) acid, minor species found in hydrogenated soybean oil and margarine, by capillary gas chromatography-matrix isolation-Fourier transform-infrared (GC-MI-FT-IR) spectroscopy. FAMEs of 18:3 acid isomers in margarine, soybean oil hydrogenated in our laboratory, and isomerized linolenic acid were identified by this method, and MI-FT-IR spectra of FAME geometric isomers of octadecatrienoic and conjugated octadecadienoic acids are reported for the first time. Five major C18 triene GC peaks are found in chromatograms of isomerized methyl linolenate, representing species with tri-cis and tri-trans configurations and three species with cis-trans mixed configurations. FAME isomers with these configurations are also found for a hydrogenated soybean oil having an iodine value of 111. Methyl linolenate (tri-cis) is no longer found when soybean oil is further hydrogenated to an iodine value of 96. IR spectra characteristic of a tri-trans isomer are obtained for two test samples with iodine values of 111 and 96. Besides methyl linolenate, only isomers with a mono-trans di-cis configuration are found for the margarine analyzed. Conjugated cis-trans and trans-trans 18:2 FAME isomers are also found in all the hydrogenated soybean oil and margarine analyzed.     

Parametric studies of matched filters to enhance the signal-to-noise ratios of LC-MS-MS peaks

Chromatographic parameters of reference signals employed in matched filter methods have been studied using numerical experiments to improve the signal-to-noise (S/N) ratios of small liquid chromatography (LC) peaks obtained with electrospray tandem mass spectrometers (MS-MS). These parameters include the width, shape, and S/N ratios of chromatographic peaks used as the reference signal profiles. Our results show the effect of reference peak widths on improving the S/N ratio of chromatographic peaks; the influence of reference peak shapes is negligible. To verify simulation results, various reference signals, including analyte peaks of high concentration standards, internal standard peaks, and artificial Gaussian peaks of different widths, have been employed to enhance signal peaks on real liquid chromatography-tandem mass spectrometry (LC-MS-MS) chromatograms via matched filter methods. Our experimental results demonstrate that the S/N ratio enhancement of chromatographic peaks agree with the simulation predictions. These findings, therefore, suggest that regardless of peak shape, a well-smooth peak with a width close to that of the analyte peak is an adequate reference signal, when matched filter methods are used to improve LC-MS-MS chromatograms. Nevertheless, all methods processed LC-MS-MS peaks in this study do not achieve the ideal improvement ratios estimated with simulation results. We attribute this deficiency to spike-like noise, which have considerable low frequency components riding on LC-MS-MS chromatograms. Matched filtering, which works as a low-pass filter in the frequency domain, cannot effectively eliminate low frequency flicker noise contributed by these spikes. In addition, simple median filtering does not provide adequate improvement despite being able to smooth out most spikes in the chromatograms.     

Studies on lignan constituents from Schisandra chinensis (Turcz.) Baill. fruits using high-performance liquid chromatography/electrospray ionization multiple-stage tandem mass spectrometry

A reversed-phase high-performance liquid chromatography-diode array detector-electrospray ionization multiple-stage tandem mass spectrometry (RP-HPLC-DAD-ESI-MS(n)) method has been developed for the detection and analysis of lignan constituents in the methanol extract from the fruits of Schisandra chinensis (Turcz.) Baill. RP-HPLC-DAD-ESI-MS(n) and electrospray ionization Fourier transform ion cyclotron resonance multiple-stage tandem mass spectrometry (ESI-FT-ICR-MS(n)) have been applied to investigate the characteristic product ions of four lignan reference compounds. Then, the logical fragmentation pathways of the lignans have been proposed. By comparing the retention time (t(R)) of HPLC, the ESI-MS(n) data and the structures of analyzed compounds with the data of reference compounds and in the literature, 11 peaks in HPLC have been unambiguously identified and another 5 peaks have been tentatively identified or deduced. Also, in the present paper, the extracted ion chromatograms (EIC) have been used to analyze the lignan isomers. The experimental results demonstrate that RP-HPLC-DAD-ESI-MS(n) is a specific and useful method for the identification of the lignan constituents and their isomers.     

In vivo biodistribution of <Superscript>131</Superscript>I labeled bleomycin (BLM) and isomers (A2 and B2) on experimental animal models

Bleomycins (BLMs; BLM, A2, and B2) were labeled with ¹³¹I and radiopharmaceutical potentials were investigated using animal models in this study. Quality control procedures were carried out using thin layer radiochromatography (TLRC), high performance liquid chromatography (HPLC), and liquid chromatography (LC/MS/MS). Labeling yields of radiolabeled BLMs were found to be 90, 68, and 71%, respectively. HPLC chromatograms were taken for BLM and cold iodinated BLM (¹²⁷I-BLM). Five peaks were detected for BLM and three peaks for ¹²⁷I-BLM in the HPLC studies. Two peaks belong to isomers of BLM. The isomers of BLM were purified with using HPLC. Biological activity of BLM was determined on male Albino Wistar rats by biodistribution and scintigraphic studies were performed for BLMs by using New Zelland rabbits. The biodistribution results of ¹³¹I-BLM showed high uptake in the stomach, the bladder, the prostate, the testicle, and the spinal cord in rats. Scintigraphic results on rabbits agrees with that of biodistributional studies on rats. The scintigraphy of radiolabeled isomers (¹³¹I-A2 and ¹³¹I-B2) are similiarly found with that of ¹³¹I-BLM.     

Identification of compounds in gasoline range mixtures using combined group-type and capillary GC separations

Summary A procedure is described to improve the identification of the hydrocarbon isomers separated on a single capillary column. Group-type PNA separation was combined with capillary GC analysis. Different paraffin and naphthene groups separated by carbon number on the 13X column of a PNA-analyzer were heart-cut and analysed off-line by capillary GC. Capillary GC chromatograms of the trapped groups compared to that of the original sample helped to identify the peaks (at least by group-type), to clear up mixed peaks and to find out the ratio of the compounds co-eluting in that particular peak. Results were used to create identification tables for different types of naphthas. Presented at Balaton Symposium on High Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

The analysis of dinitrotoluene isomer mixtures by nuclear magnetic resonance

NMR data are given for all the dinitrotoluene isomers. It is shown that the components in mixtures of these isomers produced for example, by the direct nitration of toluene, can be recognised readily by NMR. Quantitative analyses can be performed using the heights of the methyl proton peaks of the various isomers. The accuracy of the method and the effects of any residual toluene or mononitrotoluenes are discussed.     

Influence of the structure of the alcoholic modifier on the enantioselective separation of nadolol

The influence of the structure of the alcoholic modifier of the mobile phase on the liquid chromatographic separation of the optical isomers of nadolol on a Pirkle-type chiral stationary phase was investigated. The isomers were separated as their chiral 1-naphthylureides on a column consisting of 3,5-dinitrobenzoyl- -leucine covalently bound to 3-μm aminopropylsilica, using an eluent consisting of n-hexane modified with an alcohol. A number of straight-chain, branched and unsaturated alcohols with carbon numbers ranging from 1 to 8 were evaluated. The choice of alcohol influenced both retention and selectivity, with optimum stereoselectivity being observed for C₃. The alcoholic modifiers selectively affected the retention and resolution of the two pairs of enantiomers that constitute nadolol. Thus chromatograms displaying two, three or four peaks could be obtained, depending on which modifier was employed. The best separation of all four isomers was achieved with ethanol as the modifier.     

Alkoxy compounds XIX. The stereoisomerism of some 2, 5-dialkyl-5-α-alkoxyethyl-1, 3-dioxanes

Using PMR spectra and GL chromatograms, it is shown that 2,5-di methyl-, 2-isopropyl-5-ethyl-, 2, 5-diisopropyl-5-α-isopropoxyethyl-1, 3-dioxane are mixtures of isomers. Efficient columns are used to fractionate these mixtures into the individual isomers, purities being checked by GLC. From PMR spectra and dipole moments it was concluded that the low-boiling isomers of the stereoisomeric dioxanes are trans forms with chair configuration, while the high-boiling isomers are cis, and have the unsymmetrical boat-shaped configuration.     

Charge localization—I The ion kinetic energy spectra of ortho-, meta- and para-phenylenediamine

The ion kinetic energy spectra of o-,m-and p-phenylendiamine are presented. Decompositions of doubly-charged ions are given for the three isomers. From the width of the peaks, the energy released is measured and the equivalent intercharge distance is calculated. The results are discussed in terms of possible structures of the various ions. Also, metastable transitions which could give rise to peaks corresponding to energies below that of the mainion beam are listed and the results discussed. Significant differences were observed among the energy spectra of the three isomers.     

Application of Carbowax 20M as an open-tubular liquid phase in analyses of nutritionally important fats and oils.

In the first part, the reasons for the choice of Carbowax 20M-terephthalic acid as a liquid phase are indicated and the technique for preparation of columns is descirbed. The ECL of 14 to 24 carbon fatty acids (branched and positional isomers of unsaturated acids) as well as the accuracy of determination of some fatty acids, are presented. In the second part, examples of chromatograms are given as well as tables concerning the composition of various fats: vegetable oils, depot fats, and fats from organs of monogastric species, polygastric species, and fish.     

System peaks observed in capillary liquid chromatography with eluents containing triethylamine

Summary Triethylamine is often added to mobile phases in reversed-phase liquid chromatography for dynamic deactivation of free silanol groups of the stationary phase. It has been observed that eluents composed of methanol and triethylamine generate two system peaks in chromatograms obtained with LiChrosorb RP-select B stationary phase, whose retention times correspond to the dead time and to the retention time of triethylamine. It has been demonstrated that the system peaks can be positive or negative depending on the experimental conditions and may be incorrectly interpreted as peaks corresponding to sample components. An approach is outlined to unambiguous identify these system peaks in chromatograms of practical samples.     

Liquid adsorption chromatography of polyethers: experiments and simulation

The adsorption behavior of poly(ethylene glycol) (PEG) in reversed-phase chromatography is studied both experimentally and theoretically and a computer simulation of chromatograms is performed on the basis of these studies. The experimental conditions were: different reversed-phase adsorbents and a solvent methanol–water system as the mobile phase. At varying mobile phase compositions highly resolved chromatograms of PEG samples were obtained, in which all peaks could be identified, and the dependencies of the distribution coefficient on the degree of polymerization for PEG molecules were evaluated by processing these chromatograms. The data were interpreted by using a theory of homopolymers based on a continuum Gaussian chain model of flexible macromolecules and a slit-like model of pores of stationary phase. The theory proved to describe well the experimental data in the whole range of studied molecular masses, and the thermodynamic parameters characterizing interactions of ethylene oxide repeating units in PEG molecules with the adsorbent pore walls have been determined from the comparison of the theory with the experimental data. The dispersion of chromatographic peaks corresponding to individual oligomer molecules is also estimated. In the system studied the peak width occurred to be proportional to the distribution coefficient of corresponding macromolecule. The theory is used to develop a computer-assisted procedure for simulation of chromatograms for samples of linear homopolymers. Using the obtained data on the thermodynamic parameters and the estimates of peak dispersion, chromatograms are simulated for PEG samples at two different chromatographic conditions. These simulated chromatograms were in good quantitative agreement with the real chromatograms.     

Deconvolution method for accurate determination of overlapping peak areas in chromatograms.

A method is described for deconvoluting chromatograms which contain overlapping peaks. Parameters can be selected to ensure that attenuation of peak areas is uniform over any desired range of peak widths. A simple extension of the method greatly reduces the negative overshoot frequently encountered with deconvolutions. The deconvoluted chromatograms are suitable for integration by conventional methods.     

Glass-capillary gas chromatography of chlorobenzenes on SE-30 and Carbowax 20M columns. Simultaneous determination of chlorobenzenes and chlorophenols

Summary Gas chromatography of benzene and all chlorobenzenes has been studied on SE-30 and Carbowax 20M glasscapillary columns under various operating conditions. The benzene isomers are eluted on both columns according to their boiling points. Separation of all components in a mixture is achieved on Carbowax 20M, whereas on SE-30 the peaks of closely related isomers overlapped. Also one partial overlapping is observed on a non-polar phase. The relative retention times for compounds are given and the retention order is discussed. The retention behaviour of chlorobenzenes and chlorophenols is compared. By using an SE-30 quartz-capillary column a mixture of 33 individual components gives 29 resolved peaks the analysis time being less than 26 minutes. A polar column proved to be unsuitable for the separation of polychlorophenols.     

A new mathematical procedure to evaluate peaks in complex chromatograms

Automatic peak evaluation in chromatograms and subsequent quantification of compound concentrations is still a challenge in the analysis of complex samples containing hundreds or thousands of compounds. Although a number of software packages for peak evaluation exist, baseline definition and overlapping peaks of different shapes are the main reasons which prevent reliable automatic analysis of complex chromatograms. A new mathematical procedure is presented which uses peak shapes extracted from the chromatogram itself and modified by nonlinear (in fact, hyperbolic) stretching of the peak head and tail. With this approach, the peak parameters are position, height, scale of front, scale of tail, and smoothness of transition from front to tail scaling. This approach is found to give a substantially better fit than traditional analytically defined peak shapes. Together with a good peak finding heuristic and nonlinear optimization of parameters this allows a reliable automatic analysis of chromatograms with a large number of peaks, even with large groups of overlapping peaks. The analysis matches the quality of standard interactive methods, but still permits interactive refinement. This approach has been implemented and tested on a large set of data from chromatography of hydrocarbons in ambient air samples.     

Resolution of overlapped chromatograms by means of the kalmam filter : Data Processing of Liquid Chromatographic Signals without Solvent Peaks

If several samples are injected successively at short intervals into a liquid chromatograph, overlapped chromatograms of the samples will result. This paper describes an application of this successive-injection method to determination of samples without solvent peaks. Twenty peaks in the overlapped chromatograms resulting from five successive injections of samples with four components (phenetole, biphenyl, pyrene and perylene) were resolved and quantified by a reduced four-dimensional Kalman filter. The period of the single chromatogram of the four components is ca. 14 min, and the period of the five overlapped chromatograms ca. 26 min, for injection intervals of 3 min. The calibration lines for the four components are all straight and satisfactory; the slope, A, of every line was 1.005>A>0.9996 with correlation coefficients better than 0.999992. This successive-injection method with the reduced Kalman filter is time-saving for trivial routine work.     

Chromatogram simulation by area reproduction

A modified Poisson function has been developed for the simulation of chromatographic peaks. The proposed model is shown to have the property of exactly recreating the experimentally determined peak area. Model parameters are obtained directly from the experimental peak, and overlapping peaks are deconvoluted such that the area sum of overlapping peaks is kept unchanged. The method was applied to real, complex chromatograms.