Ternary surface complexes by theE(%)-pH curve method

A new method for the study of ternary surface complexes at liquid-solid interface, theE(%) -pH curve method, was proposed. Four types ofE(%)-pH curves, namely, phenomenon of left-right shifts of S-shaped curve, V-shaped curve, monodirection shift curve and X-shaped curve, were discovered. Correspondingly, apart from type (I) ternary surface complex and type (II) ternary surface complex , a new type of ternary surface complex was discovered. Project supported by the National Natural Science Foundation of China and the Fund of Doctoral Degree’s Spot.     

Determination of stability constant of ternary surface complexes at liquid-solid interface in sea water by the rule of left-right shifts of S-shaped curve

A new method is suggested for determining the stability constant of ternary surface complexes (TSC) at liquid-solid interfaces in natural water. Its basic principle is based on the rule of left-right shift (RLRS) of S-shaped curve, from which the peak-type curve of E(%) with the concentration of organic matter is obtained. The peak-type curve is further used to obtain the (ksAM/kSM) values by using respectively the method of equality of E(%) when [H2A] = [H2A]0 (1) and the method of [H2A]max (2). From the known KSM,the stability constant KSAM of liquid-solid interfacial ternary surface complexes can be obtained.     

镧系元素-N,N-二(2-氧吡咯-1-甲基)甘氨酸-邻菲咯啉三元体系的光致变色

采用激发光谱、荧光光谱和紫外 可见光谱研究了镧系元素 N ,N 二 (2 氧吡咯 1 甲基 )甘氨酸 (MPG) 邻菲咯啉 (phen)三元体系的性质。研究了该体系水溶液的光致变色。太阳光或汞灯照射下溶液由黄色转变成绿色 ,而在避光处保存 ,绿色褪去变成黄色溶液。这种光致变色现象与体系的pH值有关     

The synthesis and characterization of a new (E,E)-dioxime containing 20-membered tetraazadioxa macrocyclic moieties and its mononuclear complexes

A new (E,E)-dioxime, (2Z,3Z)-9,20-bis[(4-methylphenyl)sulfonyl]-1,4,7,8,9,10,11,12,14,15,17, 18,19,20,21,22-hexadecahydro-13,16-ethano[1,4,7,11,14,18]dioxatetraazacycloicosino[2,3-g] quinoxaline-2,3-dione dioxime (6) (H₂L) has been synthesized by reacting cyanogen-di-N-oxide (5) with 4,15-bis[(4-methylphenyl)sulfonyl]-2,3,4,5,6,7,9,10,12,13,14,15,16,17-tetradecahydro-8,11-ethano-1,18,4,8,11,15-benzodioxatetraazacycloicosine-20,21-diamine (4). Mononuclear complexes (7) and (8) of this ligand have been synthesized by reacting the vic-dioxime (H₂L) with NiCl₂.6H₂O and CoCl₂.6H₂O respectively. The BF₂⁺ capped Ni(II) and Co(III) complexes (9) and (10) of the dioxime have been synthesized from (7) and (8), respectively. The new compounds were characterized by a combination of elemental analysis, ¹H- and ¹³C-NMR, IR. and MS. spectral data.     

Synthesis,structure, spectroscopic,and DNA binding properties of Co(III) and Ni(II) complexes with ((E)-2-(amino((pyridin-2-ylmethylene)amino)methylene)maleonitrile)

Two new complexes, [Co(L)₂]Cl·(MeOH)₂ (1) and [Ni(L)₂]₄·EtOH (2) (L?=?(E)-2-(amino((pyridin-2-ylmethylene)amino)methylene)maleonitrile), were synthesized and characterized by X-ray crystallography, IR, UV, and fluorescence spectroscopy. According to X-ray crystallographic studies, each metal was six-coordinate with six nitrogens from two ligands. Both complexes form two-dimensional supramolecular networks via hydrogen bonding and π–π interactions. Ultraviolet and visible spectra showed that absorptions arise from π–π ^?, MLCT, and d–d electron transitions. Fluorescence spectroscopy revealed moderate intercalative binding of these two complexes with EB–DNA, with apparent binding constant (K _app) values of 9.14?×?10⁵ and 3.20?×?10^5?M^?1 for Co(III) and Ni(II) complexes, respectively. UV–visible absorption spectra showed that the absorption of DNA at 260?nm was quenched for 2 but quenched then improved for 1 with addition of complexes, tentatively attributed to the effect of the combined intercalative binding and electrostatic interaction for 1.     

Preparation of soluble ternary heteroazo dye complexes for the spectrophotometric determination of trace uranium(VI)

The complexing ability of typical pyridylazo, quinolylazo and thiazolylazo dyes with uranium(VI) in aqueous ethanol media are investigated in the presence and absence of aromatic carboxylic acid. Uranium(VI) forms solubilized ternary complexes with PAN, PAR, TAM, 5-Br-PADAP, 3,5-diBr-PADAP and QADAP in 48% ethanol solution containing sufficient amounts of sulfosalicylic acid and triethanolamine buffer (pH 7.8). Aromatic carboxylic acids contribute to expel the coordinated water molecules from the uranium (VI) moiety and their chelating effects have been explained by ternary complex formation. An increase in molar absorptivity and no shift in the wavelength of maximum absorbance are observed for all uranium(VI) complexes investigated. The 11 stoichiometry of uranuim(VI) and heteroazo dye in the binary complex does not change through ternary complex formation. The molar absorptivity of the uranium(VI)-3,5-diBr-PADAP-sulfosalicylic acid ternary complex at 595 nm is 8.4×10⁴l mol^–1 cm^–1 and Beer's law is valid up to 2.5gmg ml^–1 of uranium(VI). The interferences due to coexisting metal ions can be effectively masked by addition of CyDTA or Ca-CyDTA.     

Study on carbon-hydrogen activation of ketones by Gold(III) complexes and the synthesis and characterization of two ketonylgold(III) complexes

The acetonylgold(III) compound [Au(ppy)(CH₂COCH₃)Cl] (1) (ppy = 2-phenylpyridine) was unexpectedly obtained during the crystallization process of Au(III) lactate complex [Au(ppy)(CH₃CHOHCOO⁻)Cl]. This new structure prompted us to further study the role of Au(III) complexes on the carbon-hydrogen activation of ketones. Complex [Au(ppy)(CH₂COCH₃)NO₃] (2) was synthesized by reacting [Au(ppy)(NO₃)₂] with acetone while the ketonyl Au(III) complex [Au(apd)Cl₂] (3) (Hapd = 2-acetylpyridine) was obtained through carbon-hydrogen bond activation of the acetyl group. The crystal structures of 1 and 2 have common features: a square-planar Au(III) centre coordinated by one five-membered chelate ring, one acetonyl ligand and one anion (chloride or nitrate). Both structures show that carbon-hydrogen activation of acetone by 2-phenylpyridine-Au(III) complexes leads to the formation of acetonyl-Au(III) complexes. The Au-CH₂ bond lengths (2.067(7) Å, 1 and 2.059(5) Å, 2) are similar to each other but longer than the Au-C (phenyl) bond lengths. The two softest ligands (carbanion) are also cis to each other in the thermodynamically most stable isomer. In complex 3, the σ-bonded acetyl group is confirmed by ¹³C DEPT NMR spectroscopy.     

The synthesis and characterization of ( E,E )-dioxime and its transition metal complexes containing 12-membered macrocycles linked to ferrocenyl-methyl groups

13,14-bis(Hydroxyimino)-4,7-bis(ferrocenylmethyl)-2,3,4,5,6,7,8,9-octahydrobenzo[k]-4, 7-diaza-1,10-dithiacyclododecine[13,14-g]-quinoxaline (H₂L) has been prepared from (E,E)-dichloroglyoxime and 12,13-diamino-4,7-bis(ferrocenylmethyl)-2,3,4,5,6,7,8,9-octahydrobenzo[k]-4,7-diaza-1,10-dithiacyclododecine which was synthesized from 12,13-dinitro-4,7-bis(ferrocenylmethyl)-2,3,4,5,6,7,8,9-octahydrobenzo[k]4,7-diaza-1,10-dithia cyclododecine. Mononuclear nickel(II) and copper(II) complexes of H₂L have a metal-ligand ratio of 1?:?2 and the ligand coordinates through two nitrogen atoms, as do most (E,E)-dioximes. The homotrinuclear [Cu(L)₂Cu₂(dipy)₂](NO₃)₂ compound coordinates to the other two copper(II) ions through deprotonated oximate oxygens and two 2,2′-dipyridyl as an end-cap ligand to yield the trinuclear structure. The ligand and its complexes have been characterized on the basis of ¹H, ¹³C NMR, IR and MS spectroscopy and elemental analyses.     

Spectrophotometric determination of cationic surfactants by formation of ternary complexes with Fe(III) and chrome azurol

An extraction-free spectrophotometric method for the determination of cationic surfactants, such as cetylpyridinium chloride, cetyltrimethylammonium bromide and zephiramine is proposed, which is based on the formation of ternary complexes with Fe(III) and chrome azurol S. The molar ratio of the complex is 2:1:1 (Fe(III):chrome azurol S: cationic surfactant). The method is simple, rapid and sensitive, giving an apparent molar absorptivity of 4.5×10⁴ L·mol^?1-cm^?1 and a linear range of 0.1–6.0 μmol/L cationic surfactants. The total cationic surfactant content can be determined directly in aqueous solutions by measuring the absorbance at 680 nm (pH 5.8). The method has been successfully applied to water samples.     

Synthesis of benzoaza-15(18)-crown-5(6) ethers and study of their complexes with lead(II)

1. Download : Download high-res image (93KB)
2. Download : Download full-size image

     

Synthesis and properties of the chain-like polymeric copper (II) complexes bridged by bis(diphenylphosphino oxide)ethane

At room temperature, the chain-like polymeric copper (II) complexes bridged by bis (diphenylphosphino oxide) ethane (dppeO2), [Cu(dppeO2)X2]n[X=Cl(1), Br(2)] have been prepared and characterized by elemental analysis, 31P NMR, TG-DTA and X-ray analysis for [ CuBr2 (dppeO2) ] n The chain is composed of subunits containing tetrahedron coordinated copper (II) atoms. The four-coordinated copper (II) atom is ligated to another four-coordinated copper (II) atom through dppeO2. The coordination sphere of copper(II) atom is completed by two monodentate bromide and two oxygen atoms from bridging dppeO2. Crystal data are as follows: C26-H24CuP2BnO2, 0.50 mm× 0.40 mm×0.40 mm, monoclin-ic, space group: C2/c, λ= 0.07107 nm(Mo Ka), a = 1.2286(2) nm, b=2.0555(8) nm, c = 1.0652(2) nm, β = 97.366(9)°, V = 2.668nm3, Z = 4, Dcalc = 1.628 g·cm-3, R = 0.066; Rw = 0.091.     

Novel flame retardant paint based on Co(II) and Ni(II) metal complexes as new additives for surface coating applications

The study is focused on the synthesis of a new Co(II) and Ni(II) metal complexes, which is synthesized by the reaction of the isatin 4‐aminoantipyrine Schiff base ligand with selected divalent Co(II) and Ni(II) ions and their possible applications as flame retardant additives in paint formulations for surface coating application. The prepared metal complexes were characterized using a combination of Fourier transform infrared, elemental analysis, proton nuclear magnetic resonance, ¹³C‐NMR spectra, and mass spectroscopy. The prepared Schiff base ligand metal complexes were physically added to alkyd paint formulation to give coating formulations at a laboratory scale and then applied onto plywood and steel panels using a brush. The ignitability and oxygen index values obtained indicated that the paint which contained the prepared Co(II) and Ni(II) metal complexes as additives exhibited very good flame retardant. The physical and mechanical characteristics of the coatings were studied in order to estimate any disadvantages due to the incorporation of the additives. It was discovered that the added substances did not impact the hardness, flexibility, and adhesion of the prepared coating films. The gloss of the paint formulation film was improved due to the incorporation of the aromatic ring into the formulation and the level of the oil percent.     

Spectrophotometric determination of ascorbic acid by the modified CUPRAC method with extractive separation of flavonoids-La(III) complexes

The proposed method for ascorbic acid: AA (Vitamin C) determination is based on the oxidation of AA to dehydroascorbic acid with the CUPRAC reagent of total antioxidant capacity assay, i.e., Cu(II)-neocuproine (Nc), in ammonium acetate-containing medium at pH 7, where the absorbance of the formed bis(Nc)-copper(I) chelate is measured at 450 nm. The flavonoids (essentially flavones and flavonols) normally interfering with the CUPRAC procedure were separated with preliminary extraction as their La(III) chelates into ethylacetate (EtAc). The Cu(I)-Nc chelate responsible for color development was formed immediately with AA oxidation. Beer's law was obeyed between 8.0 × 10⁻⁶ and 8.0 × 10⁻⁵ M concentration range, with the equation of the linear calibration curve: A_450 nm = 1.60 × 10⁴C (mol dm⁻³) − 0.0596. The relative standard deviation (R.S.D.) in the analysis of N = 45 synthetic mixtures containing 1.25 × 10⁻² mM AA with flavonoids was 5.3%. The Cu(II)-Nc reagent is a lower redox-potential and therefore more selective oxidant than the Fe(III)-1,10-phenanthroline reagent conventionally used for the same assay. This feature makes the proposed method superior for real samples such as fruit juices containing weak reductants such as citrate, oxalate and tartarate that may otherwise produce positive errors in the Fe(III)-phen method when equilibrium is achieved. The developed method was applied to some commercial fruit juices and pharmaceutical preparations containing Vitamin C + bioflavonoids. The findings of the developed method for fruit juices and pharmaceuticals were statistically alike with those of HPLC. The proposed spectrophotometric method was practical, low-cost, rapid, and could reliably assay AA in the presence of flavonoids without enzymatic procedures open to interferences by enzyme inhibitors.     

Synthesis and Characterization of a New (E, E)-Dioxime and Its Homo and Heteronuclear Complexes Containing Macrobicylic Moieties

A new N,N'-substituted diaminoglyoxime (H ₂ L) containing a diazatetraoxamacrobicycle [2.2.2_B] has been synthesized from an aromatic primary amine attached to the cryptand moiety and cyanogen-di-N-oxide. The BF₂ ⁺-capped Co(III) and heterotri-nuclear complexes of thevic-dioxime were prepared. The new compounds werecharacterized by a combination of elemental analysis and ¹H NMR,¹³C NMR, IR and MS spectral data.     

Nickel (II) tetrapyridyl complexes as electrocatalysts and precatalysts for water oxidation

Two nickel complexes, [Ni(tpen)](ClO₄)₂.0.5CH₃COCH₃ ( 1 ) and [Ni(tpbn)](ClO₄)₂ ( 2 ), of tetrapyridyl ligands N,N,N′,N′-tetrakis(2-pyridyl-methyl)-1,2-ethanediamine (tpen) and N,N,N′,N′-tetrakis(2-pyridyl-methyl)-1,4-butanediamine (tpbn) were prepared and their catalysis for water oxidation reaction (WOR) studied. In 0.1 M phosphate buffer solution (PBS) of pH 8.0, complex 1 is a homogeneous molecular catalyst with an overpotential of ~440 mV and a Faradaic efficiency of 89%. At pH ≥ 9.0, complex 1 degraded gradually during the catalytic process and formed NiO_x composite (nickel oxide with general formula Ni_xO_yH_z) active for WOR. In contrast, complex 2 deteriorated under measured conditions (pH 8.0–12.0) and formed NiO_x composite active for WOR. The NiO_x composite derived from 1 in 0.1 M PBS at pH 11.0 showed an activity with an overpotential of ~500 mV, a Tafel slope of ~90 mV/decade and a Faradaic efficiency of 97%. Mechanisms were proposed for water oxidation catalyzed by 1 and 2 . This work revealed that the catalytic activity of the nickel complexes was related to the flexibility of the tetrapyridyl ligands and the adaptability of the coordination sphere of the nickel(II) center.     

Synthesis and characterization of Co(II), Ni(II), Zn(II) and Cu(II) complexes with a new tetraazamacrocyclic Schiff base ligand containing a piperazine moiety: X-ray crystal structure determination of the Co(II) complex

Two macrocyclic Schiff base ligands, L¹ [1+1] and L² [2+2], have been obtained in a one-pot cyclocondensation of 1,4-bis(2-formylphenyl)piperazine and 1,3-diaminopropane. Unfortunately, because of the low solubility of both ligands, their separation was unsuccessful. In the direct reaction of these mixed ligands (L¹ and L²) and the appropriate metal ions only [CoL¹(NO₃)]ClO₄, [NiL¹](ClO₄)₂, [CuL¹](ClO₄)₂ and [ZnL¹(NO₃)]ClO₄ complexes have been isolated. All the complexes were characterized by elemental analyses, IR, FAB-MS, conductivity measurements and in the case of the [ZnL¹(NO₃)]ClO₄ complex with NMR spectroscopy.     

Effective oxidation of alcohols by Iron(III)-Schiff base-triphenylphosphine complexes

Iron(III)-Schiff base-triphenylphosphine complexes catalyze the oxidation of alcohols to their corresponding carbonyl compounds in presence of hydrogen peroxide in good yields.     

Computational study of glycine–(water)3 complex by density functional method

Glycine–(water)₃ complexes have been studied by means of B3LYP density functional method using 6-311++G* basis set. In the complex considered here, the three water molecule are either attached to the carboxylic group or bridge between the amino group and carboxylic group of glycine. Four such complexes are studied. Relaxation energies, two-, three- and four-body interaction energies are obtained by applying many-body analysis to know their role in binding energy of the complex. The results are compared with recent work on glycine–(water)₃ complex with group as proton donor [A. Chaudhari, P.K. Sahu, S.L. Lee, J. Chem. Phys. 120 (2004) 170]. In the most stable structure of glycine–(water)₃ complex, the three water molecules are attached to the carboxylic group of glycine and it is 5.3 kcal/mol lower in energy than that of the most stable structure reported earlier. The three-body term from water–water–water interaction in the most stable in this work and that reported earlier is unique since the distances between the water molecules are almost same. The two-body term from water–water interaction has significant contribution to the total two-body term when the distance between water molecules is less than 3 Å.     

Influence of the built-in pyridinium salt on asymmetric epoxidation of substituted chromenes catalysed by chiral (pyrrolidine salen)Mn(III) complexes

Chiral (pyrrolidine salen)Mn(III) complexes 1 with an N-benzoyl group and 2 with an N-isonicotinoyl group as well as the corresponding N-methyl (3) and N-benzyl (4) pyridinium salts of 2 were synthesized. The catalytic properties of 1–4 and 2 with excess CH₃I were explored to figure out the influence of the internal pyridinium salt in the catalyst on asymmetric epoxidation of substituted chromenes with NaClO/PPNO as an oxidant system in the aqueous/organic biphasic medium. The (pyrrolidine salen)Mn(III) complexes with an internal pyridinium salt, either formed in situ or isolated, displayed higher activities than analogous complexes 1, 2 and Jacobsen's catalyst in the aforementioned reaction, with comparable high yields and ee values. The acceleration of the reaction rate is attributed to the phase transfer capability of the built-in pyridinium salt of the (salen)Mn(III) catalyst. The effect of the internal pyridinium salt on the epoxidation of substituted chromenes is similar to that of the external pyridinium salts and ammonium halides.