Au(I) and Au(III) complexes of a sterically bulky benzimidazole-derived N-heterocyclic carbene

The reaction of [AuCl(SMe₂)] with in situ generated [AgCl(ⁱPr₂-bimy)] (ⁱPr₂-bimy = 1,3-diisopropylbenzimidazolin-2-ylidene), which in turn was obtained by the reaction of Ag₂O with 1,3-diisopropylbenzimidazolium bromide (ⁱPr₂-bimyH⁺Br⁻, A), afforded the monocarbene Au(I) complex [AuCl(ⁱPr₂-bimy)] (1). Subsequent reaction of 1 and the ligand precursor ⁱPr₂-bimyH⁺BF₄⁻, (B) in acetone in the presence of K₂CO₃ yielded the bis(carbene) complex [Au(ⁱPr₂-bimy)₂]BF₄ (2) as a white powder in 80% yield. The oxidative addition of elemental iodine to complex 2 gave the bis(carbene) Au(III) complex trans-[AuI₂(ⁱPr₂-bimy)₂]BF₄ (3) as an orange-red powder in 92% yield. All complexes 1-3 have been fully characterized by multinuclear NMR spectroscopies, ESI mass spectrometry, elemental analysis, and X-ray single crystal diffraction. Complexes 1 and 2 adopt a linear geometry around metal centers as expected for d¹⁰ metals. The geometry around the Au(III) metal center in 3 is essentially square-planar with two carbene ligands in trans-position to each other. Complex 3 shows absorption and photoluminescence properties owing to a ligand to metal charge transfer.     

New cationic palladium (II) and rhodium (I) complexes of [Ph2PCH2C(Ph)N(2,6-Me2C6H3)]

Treatment of the bulky iminophosphine ligand [Ph₂PCH₂C(Ph)N(2,6-Me₂C₆H₃)] (L) with [M(CH₃CN)₂(ligand)]⁺ⁿ, where for M = Pd(II): ligand = η³-allyl, n = 1, and for M = Rh(I), ligand: 2(C₂H₄), 2(CO) or cod, n = 0, yields the mono-cationic iminophosphine complexes [Pd(η³-C₃H₅)(L)][BF₄] (1), [Rh(cod)(L)][BF₄] (2), [Rh(CO)(CH₃CN)(L)][BF₄] (3), and cis-[Rh(L)₂][BF₄] (4). All the new complexes have been characterised by NMR spectroscopy and X-ray diffraction. Complex 1 shows moderate activity in the copolymerisation of CO and ethene but is inactive towards Heck coupling of 4-bromoacetophenone and n-butyl acrylate.     

Rhodium(I) complexes with 1′-(diphenylphosphino)ferrocenecarboxylic acid as active and recyclable catalysts for 1-hexene hydroformylation

The rhodium complex trans-[Rh(CO)(Hdpf-κP)(dpf-κ²O,P)] (1), (Hdpf = 1′-(diphenylphosphino)ferrocenecarboxylic acid) was used as an efficient and recyclable catalyst for 1-hexene hydroformylation producing ca. 80% of aldehydes at 10 atm CO/H₂ and 80 °C. After the reaction, unchanged complex 1 was separated from the reaction mixture and used again three times with the same catalytic activity. The effect of modifying ligands, phosphines and phosphites, on the reactivity of 1 was investigated. The active catalytic systems containing 1 or trans-[Rh(CO)(L)(dpf-κ²O,P)] (2) were formed in situ from acetylacetonato rhodium(I) precursors [Rh(CO)₂(acac)] (3) or [RhL(CO)(acac)] (4) and Hdpf or Medpf (L = phosphine, Medpf = methyl ester of Hdpf).     

Synthesis, characterization and reactivity of tribenzylphosphine rhodium and iridium complexes

New rhodium and iridium complexes, with the formula [MCl(PBz₃)(cod)] [M = Rh (1), Ir (2)] and [M(PBz₃)₂(cod)]PF₆ [M = Rh (3), Ir (4)] (cod = 1,5-cyclooctadiene), stabilized by the tribenzylphosphine ligand (PBz₃) were synthesized and characterized by elemental analysis and spectroscopic methods. The molecular structures of 1 and 2 were determined by single-crystal X-ray diffraction. The addition of pyridine to a methanol solution of 1or 2, followed by metathetical reaction with NH₄PF₆, gave the corresponding derivatives [M(py)(PBz₃)(cod)]PF₆ [M = Rh (5), Ir (6)]. At room temperature in CHCl₃ solution, 4 converted spontaneously to the ortho-metallated complex [IrH(PBz₃)(cod){η²-P,C-(C₆H₄CH₂)PBz₂}]PF₆ (7) as a mixture of cis/trans isomers via intramolecular C-H activation of a benzylic phenyl ring. The reaction of 3 or 4 with hydrogen in coordinating solvents gave the dihydrido bis(solvento) derivative [M(H)₂(S)₂(PBz₃)₂]PF₆ (M = Rh, Ir; S = acetone, acetonitrile, THF), that transformed into the corresponding dicarbonyls [M(H)₂(CO)₂(PBz₃)₂]PF₆ by treatment with CO. Analogous cis-dihydrido complexes [M(H)₂(THF)₂(py)(PBz₃)₂]PF₆ (M = Rh, Ir) were observed by reaction of the py derivatives 5 and 6 with H₂.     

Palladium(II) complexes containing a bulky pyridinyl N-heterocyclic carbene ligand: Preparation and reactivity

Coordination chemistry of a pyridine imidazole-2-ylidene ligand (pyN ˆC) with sterically hindered substituents toward palladium(II) metal ions has been investigated. The palladium carbene complex [(C-pyN ˆC)Pd(η³-allyl)Cl] (3) is prepared via the transmetallation from the corresponding silver carbene complexes with [ClPd(η³-allyl)]₂. Upon the abstraction of chloride, coordination of pyridinyl-nitrogen becomes feasible to form [C,N-(pyN ˆC)Pd(η³-allyl)](BF₄) (4). Ligand substitution reaction of 4 with triphenylphosphine results in the formation of [(C-pyN ˆC)Pd(PPh₃)(η³-allyl)](BF₄)], which the pyridinyl-nitrogen donor is substituted by the phosphine. This palladium complex appears to be base sensitive. Treatment of 4 with t-butoxide causes the decomposition to yield the metal nano-particles. Furthermore, de-complexation of 4 takes place under hydrogen atmosphere to generate the carbene precursor, 1-(6-mesityl-2-picolyl)-3-mesitylimidazolium salt. Nevertheless, the palladium complex 4 shows good catalytic activity on the Suzuki-Miyaura and Mizoroki-Heck reactions.     

Crystal and solution structures of di-n-butyltin(IV) complexes of 5-[(E)-2-(4-methoxyphenyl)-1-diazenyl]quinolin-8-ol and benzoic acid derivatives: En route to elegant self-assembly via modulation of the tin coordination geometry

Reactions of ⁿBu₂SnCl(L¹) (1), where L¹ = acid residue of 5-[(E)-2-(4-methoxyphenyl)-1-diazenyl]quinolin-8-ol, with various substituted benzoic acids in refluxing toluene, in the presence of triethylamine, yielded dimeric mixed ligand di-n-butyltin(IV) complexes of composition [ⁿBu₂Sn(L¹)(L^2-6)]₂ where L² = benzene carboxylate (2), L³ = 2-[(E)-2-(2-hydroxy-5-methylphenyl)-1-diazenyl]benzoate (3), L⁴ = 5-[(E)-2-(4-methylphenyl)-1-diazenyl]-2-hydroxybenzoate (4), L⁵ = 2-{(E)-4-hydroxy-3-[(E)-4-chlorophenyliminomethyl]-phenyldiazenyl}benzoate (5) and L⁶ = 2-[(E)-(3-formyl-4-hydroxyphenyl)-diazenyl]benzoate (6). All complexes (1-6) have been characterized by elemental analyses, IR, ¹H, ¹³C and ¹¹⁷Sn NMR and ¹¹⁹Sn Mössbauer spectroscopy and their structures were determined by X-ray crystallography, complemented by ¹¹⁷Sn CP-MAS NMR spectroscopy studies in the solid state. The crystal structure of 1 reveals a distorted trigonal bipyramidal coordination geometry around the Sn-atom where the Cl- and N-atoms of ligand L¹ occupy the axial positions. In complexes 2-5, the molecules are centrosymmetric dimers in which the Sn-atoms are connected by asymmetric μ-O bridges through the quinoline O-atom to give an Sn₂O₂ core. The differences in the Sn-O bond lengths within the bridge range from 0.28 to 0.48 Å, with the longer of the Sn-O distances being in the range 2.56-2.68 Å and the most symmetrical bridge being in 5. The carboxylate group is almost symmetrically bidentate coordinated to the tin atom in 5 (Sn-O distances of 2.327(2) and 2.441(2) Å), unlike the other complexes in which the distance of the carboxylate carbonyl O-atom from the tin atom is in the range 2.92-3.03 Å. The structure of 5 displays a more regular pentagonal bipyramidal coordination geometry about each tin atom than in 2-4. In contrast, the centrosymmetric dimeric structure of 6 involves asymmetric carboxylate bridges, resulting in a different Sn₂C₂O₄ motif. The Sn-O bond lengths in the bridge differ by about 0.6 Å, with the longer distance involving the carboxylate carbonyl O-atom (2.683(2) and 2.798(2) Å for two molecules in the asymmetric unit). The carboxylate carbonyl O-atom has a second, even longer intramolecular contact to the Sn-atom to which the carboxylate group is primarily coordinated, with these Sn?O distances being as high as 3.085(2) and 2.898(2) Å. If the secondary interactions are considered, all the di-n-butyltin(IV) complexes (2-6) display a distorted pentagonal bipyramidal arrangement about each tin atom in which the n-butyl groups occupy the axial positions.     

Structural diversity in Cu(II), Cd(II) and Hg(II) coordination complexes with the rigid N,N′-bis(2/3-aryl)-1,4-benzenedicarboxamide ligand

The syntheses and structures of a series of metal complexes, namely Cu₂Cl₄(L¹)(DMSO)₂·2DMSO (L¹ = N,N′-bis(2-pyridinyl)-1,4-benzenedicarboxamide), 1; {[Cu(L²)_1.5(DMF)₂][ClO₄]₂·3DMF}_∞ (L² = N,N′-bis(3-pyridinyl)-1,4-benzenedicarboxamide), 2; {[Cd(NO₃)₂(L³)]·2DMF}_∞ (L³ = N,N′-bis-(2-pyrimidinyl)-1,4-benzenedicarboxamide), 3; {[HgBr₂(L³)]·H₂O}_∞, 4, and {[Na(L³)₂][Hg₂X₅]·2DMF}_∞ (X = Br, 5; I, 6) are reported. All the complexes have been characterized by elemental analysis, IR spectra and single crystal X-ray diffraction. Complex 1 is dinuclear and the molecules are interlinked through S?S interactions. In 2, the Cu(II) ions are linked through the L² ligands to form 1-D ladder-like chains with 60-membered metallocycles, whereas complexes 3 and 4 form 1-D zigzag chains. In complexes 5 and 6, the Na(I) ions are linked by the L³ ligands to form 2-D layer structures in which the [Hg₂X₅]⁻ anions are in the cavities. The L² ligand acts only as a bridging ligand, while L¹ and L³ show both chelating and bridging bonding modes. The L¹ ligand in 1 adopts a trans-anti conformation and the L² ligand in 2 adopts both the cis-syn and trans-anti conformations, whereas the L³ ligands in 3–6 adopt the trans conformation.     

Synthesis and characterization of hetero-binuclear Co-Rh complexes [CpCoS2C2(B9H10)][Rh(COD)] and [CpCoSe2C2(B10H10)][Rh(COD)]

Two hetero-binuclear complexes [Cp^∗CoS₂C₂(B₉H₁₀)][Rh(COD)] (2a) and [Cp^∗CoSe₂C₂(B₁₀H₁₀)][Rh(COD)] (2b) [Cp^∗ = η⁵-pentamethylcyclopentadienyl, COD = cyclo-octa-1,5-diene (C₈H₁₂)] were synthesized by the reactions of half-sandwich complexes [Cp^∗CoE₂C₂(B₁₀H₁₀)] [E = S (1a), Se (1b)] with low valent transition metal complexes [Rh(COD)(OEt)]₂ and [Rh(COD)(OMe)]₂. Although the reaction conditions are the same, the structures of two products for dithiolato carborane and diselenolato carborane are different. The cage of the carborane in 2a was opened; However, the carborane cage in 2b was intact. Complexes 2a and 2b have been fully characterized by ¹H, ¹¹B NMR and IR spectroscopy, as well as by elemental analyses. The molecular structures of 2a and 2b have been determined by single-crystal X-ray diffraction analyses and strong metal-metal interactions between cobalt and rhodium atoms (2.6260 Å (2a) and 2.7057 Å (2b)) are existent.     

Self-assembly of diorganotin(IV) 2-{[(E)-1-(2-oxyaryl)alkylidene]amino}acetates: An investigation of structures by X-ray diffraction, solution and solid-state tin NMR, and electrospray ionization MS

The diorganotin(IV) compounds, [Me₂SnL²(OH₂)]₂ (1), [ⁿBu₂SnL²(OH₂)]₂ (2), [ⁿBu₂SnL¹]₃ · 0.5C₃H₆O (3), [ⁿBu₂SnL³]₃ · 0.5C₆H₆ (4) and [Ph₂SnL³]_n · 0.5C₆H₆ (5) (L = carboxylic acid residue, i.e., 2-{[(E)-1-(2-oxyaryl)alkylidene]amino}acetate), were synthesized by treating the appropriate diorganotin(IV) dichloride with the potassium salt of the ligand in anhydrous methanol.The reaction of Ph₂SnL² (L = 2-{[(E)-1-(2-oxyphenyl)ethylidene]amino}acetate) with 1,10-phenanthroline (Phen) yielded a 1:1 adduct of composition, [Ph₂SnL²(Phen)] (6).The crystal structures of 1-6 were determined.The crystal of 1 is composed of centrosymmetric dimers of the basic Me₂SnL²(OH₂) moiety, where the two Sn-centres are linked by two asymmetric Sn-O?Sn bridges involving the carboxylic acid O atom of the ligand and a long Sn?O distance of 3.174(2) Å.The dimers are further linked into columns by hydrogen bonds.The coordination geometry about the Sn atom is a distorted pentagonal bipyramid with the two methyl groups in axial positions.The structure of 2 is similar.The same Sn atom coordination geometry is observed in compound 3, which is a cyclic trinuclear[ⁿBu₂SnL¹]₃ compound. Each Sn atom is coordinated by the phenoxide O atom, one carboxylate O atom and the imino N atom from one ligand and both the exo- and endo-carboxylate O atoms (mean Sn-O(exo): 2.35 Å; Sn-O(endo): 2.96 Å) from an adjacent ligand to form the equatorial plane, while the two butyl groups occupy axial positions. Compound 4 was found to crystallize in two polymorphic forms. The Sn-complex in both forms has a trinuclear [ⁿBu₂SnL³]₃ structural motif similar to that found in 3. In compound 5, distorted trigonal bipyramidal Ph₂SnL³ units are linked into polymeric cis-bridged chains by a weak Sn?O interaction (3.491(2) Å) involving the exocyclic O atom of the tridentate ligand of a neighboring Sn-complex unit. This interaction completes a highly distorted octahedron about the Sn atom, where the weakly coordinated exocyclic O atom and one phenyl group are trans to one another. In contrast, a monomeric distorted pentagonal bipyramidal geometry is found for adduct 6 where the Sn-phenyl groups occupy the axial positions. The solution and solid-state structures are compared by using ¹¹⁹Sn NMR chemical shift data. Compounds 1-6 were also studied using ESI-MS and their positive- and negative-ions mass fragmentation patterns are discussed.     

Syntheses, structural and spectroscopic characterization of novel zinc(II)-bis(trithiocarbimato) complexes and bis(N-methylsulfonyldithiocarbimate)-sulfide

Four zinc(II)-bis(trithiocarbimato) complexes with the general formula A₂[Zn(RSO₂NCS₃)₂] [A = Ph₄P⁺: R = CH₃ (1), 4-CH₃C₆H₄ (2); A = Bu₄N⁺: R = CH₃ (3), 4-CH₃C₆H₄ (4)] were obtained by the reaction of sulfur with the correspondent zinc(II)-bis(dithiocarbimato) complexes. Additionally, the compound (Ph₄P)₂[(CH₃SO₂NCS₂)₂S)] (5) was prepared from the potassium methylsulfonildithiocarbimate by oxidation with iodine. The compounds were characterized by elemental analyses and IR, ¹H NMR and ¹³C NMR spectroscopies. The compounds 4 and 5 were also characterized by X-ray diffraction techniques. The compound 4 crystallizes in the centrosymmetric space group C2/c of the monoclinic system. The Zn(II) is in a distorted tetrahedral environment (ZnS₄) in compound 4, and differ from the coordination mode observed in compound 1, which involves one sulfur and one nitrogen atom of each trithiocarbimate ligand. Compound 5 is the first example of a compound containing a bis(N-alkylsulfonyldithiocarbimate)-sulfide dianion and crystallises in the non-centrosymmetric space group P4₁2₁2 of the tetragonal system.     

Reactivity of M(en)Cl2 (M = Pd/Pt,en = 1,2-diaminoethane) with N,N′-bis(salicylidene)-p-phenylenediamine: Binding with hexafluorobenzene

Schiff base N,N′-bis(salicylidene)-p-phenylenediamine (LH₂) complexed with Pt(en)Cl₂ and Pd(en)Cl₂ provided [Pt(en)L]₂ · 4PF₆ (1) and Pd(Salen) (2) (Salen = N,N′-bis(salicylidene)-ethylenediamine), respectively, which were characterized by their elemental analysis, spectroscopic data and X-ray data. A solid complex obtained by the reaction of hexafluorobenzene (hfb) with the representative complex 1 has been isolated and characterized as 3 (1 · hfb) using UV–Vis, NMR (¹H, ¹³C and ¹⁹F) data. A solid complex of hfb with a reported Zn-cyclophane 4 has also been prepared and characterized 5 (4 · hfb) for comparison with complex 3. The association of hfb with 1 and 4 has also been monitored using UV–Vis and luminescence data.     

A “sodium trap” based on benzo-15-crown-5 with an exocyclic N-(thiophosphoryl)thiourea moiety

For N-(thio)phosphorylthioureas of the common formula RC(S)NHP(X)(OiPr)₂HL^I (R = N-(4′-aminobenzo-15-crown-5), X = S), HL^II (R = N-(4′-aminobenzo-15-crown-5), X = O), HL^III (R = PhNH, X = S), HL^IV (R = PhNH, X = O), and (N,N′-bis-[C(S)NHP(S)(OiPr)₂]₂-1,10-diaza-18-crown-6) H₂L^V, salts LiL^I,III,IV, NaL^I–IV, KL^I–IVM₂L^V (M = Li⁺, Na⁺, K⁺), Ba(L^I,III,IV)₂, and BaL^V have been synthesized and investigated. Compounds NaL^I,II quantitatively drop out as a deposit in ethanol medium, allowing the separation of Na⁺ and K⁺ cations. This effect is not displayed for the other compounds. The crystal structures of HL^III and the solvate of the composition [K(Me₂CO)L^III] have been investigated by X-ray crystallography.     

Synthesis, characterization and Schlenk equilibrium studies of methylmagnesium compounds with O- and N-donor ligands - the unexpected behavior of [MgMeBr(pmdta)] (pmdta = N,N,N′,N″,N″-pentamethyldiethylenetriamine)

MgMe₂ (1) was found to react with 1,4-diazabicyclo[2.2.2]octane (dabco) in tetrahydrofuran (thf) yielding a binuclear complex [{MgMe₂(thf)}₂(μ-dabco)] (2). Furthermore, from reactions of MgMeBr with diglyme (diethylene glycol dimethyl ether), NEt₃, and tmeda (N,N,N′,N′-tetramethylethylenediamine) in etheral solvents compounds MgMeBr(L), (L = diglyme (5); NEt₃ (6); tmeda (7)) were obtained as highly air- and moisture-sensitive white powders. From a thf solution of 7 crystals of [MgMeBr(thf)(tmeda)] (8) were obtained. Reactions of MgMeBr with pmdta (N,N,N′,N″,N″-pentamethyldiethylenetriamine) in thf resulted in formation of [MgMeBr(pmdta)] (9) in nearly quantitative yield. On the other hand, the same reaction in diethyl ether gave MgMeBr(pmdta) · MgBr₂(pmdta) (10) and [{MgMe₂(pmdta)}₇{MgMeBr(pmdta)}] (11) in 24% and 2% yield, respectively, as well as [MgMe₂(pmdta)] (12) as colorless needle-like crystals in about 26% yield. The synthesized methylmagnesium compounds were characterized by microanalysis and ¹H and ¹³C NMR spectroscopy. The coordination-induced shifts of the ¹H and ¹³C nuclei of the ligands are small; the largest ones were found in the tmeda and pmdta complexes. Single-crystal X-ray diffraction analyses revealed in 2 a tetrahedral environment of the Mg atoms with a bridging dabco ligand and in 8 a trigonal-bipyramidal coordination of the Mg atom. The single-crystal X-ray diffraction analyses of [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) showed them to be monomeric with five-coordinate Mg atoms. The square-pyramidal coordination polyhedra are built up of three N and two C atoms in 12 and three N and two Br atoms in 13. The apical positions are occupied by methyl and bromo ligands, respectively. Temperature-dependent ¹H NMR spectroscopic measurements (from 27 to −80 °C) of methylmagnesium bromide complexes MgMeBr(L) (L = thf (4); diglyme (5); NEt₃ (6); tmeda (7)) in thf-d₈ solutions indicated that the deeper the temperature the more the Schlenk equilibria are shifted to the dimethylmagnesium/dibromomagnesium species. Furthermore, at −80 °C the dimethylmagnesium compounds are predominant in the solutions of Grignard compounds 4-6 whereas in the case of the tmeda complex7 the equilibrium constant was roughly estimated to be 0.25. In contrast, [MgMeBr(pmdta)] (9) in thf-d₈ revealed no dismutation into [MgMe₂(pmdta)] (12) and [MgBr₂(pmdta)] (13) even up to −100 °C. In accordance with this unexpected behavior, 1:1 mixtures of 12 and 13 were found to react in thf at room temperature yielding quantitatively the corresponding Grignard compound 9. Moreover, the structures of [MgMeBr(pmdta)] (9c), [MgMe₂(pmdta)] (12c), and [MgBr₂(pmdta)] (13c) were calculated on the DFT level of theory. The calculated structures 12c and 13c are in a good agreement with the experimentally observed structures 12 and 13. The equilibrium constant of the Schlenk equilibrium (2 9c ? 12c + 13c) was calculated to be K_gas = 2.0 × 10⁻³ (298 K) in the gas phase. Considering the solvent effects of both thf and diethyl ether using a polarized continuum model (PCM) the corresponding equilibrium constants were calculated to be K_thf = 1.2 × 10⁻³ and K_ether = 3.2 × 10⁻³ (298 K), respectively.     

Synthesis and structural characterisation of rhodium hydride complexes bearing N-heterocyclic carbene ligands

Addition of excesses of N-heterocyclic carbenes (NHCs) IEt₂Me₂, IⁱPr₂Me₂ or ICy (IEt₂Me₂ = 1,3-diethyl-4,5-dimethylimidazol-2-ylidene; IⁱPr₂Me₂ = 1,3-diisopropyl-4,5-dimethylimidazol-2-ylidene; ICy = 1,3-dicyclohexylimidazol-2-ylidene) to [HRh(PPh₃)₄] (1) affords an isomeric mixture of [HRh(NHC)(PPh₃)₂] (NHC = IEt₂Me₂ (cis-/trans-2), IⁱPr₂Me₂ (cis-/trans-3), ICy (cis-/trans-4) and [HRh(NHC)₂(PPh₃)] (IEt₂Me₂(cis-/trans-5), IⁱPr₂Me₂ (cis-/trans-6), ICy (cis-/trans-7)). Thermolysis of 1 with the aryl substituted NHC, 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene (IMesH₂), affords the bridging hydrido phosphido dimer, [{(PPh₃)₂Rh}₂(μ-H)(μ-PPh₂)] (8), which is also the reaction product formed in the absence of carbene. When the rhodium precursor was changed from 1 to [HRh(CO)(PPh₃)₃] (9) and treated with either IMes (=1,3-dimesitylimidazol-2-ylidene) or ICy, the bis-NHC complexes trans-[HRh(CO)(IMes)₂] (10) and trans-[HRh(CO)(ICy)₂] (11) were formed. In contrast, the reaction of 9 with IⁱPr₂Me₂ gave [HRh(CO)(IⁱPr₂Me₂)₂] (cis-/trans-12) and the unusual unsymmetrical dimer, [(PPh₃)₂Rh(μ-CO)₂Rh(IⁱPr₂Me₂)₂] (13). The complexes trans-3, 8, 10 and 13 have been structurally characterised.     

Palladium and half sandwich ruthenium(II) complexes of selenated and tellurated benzotriazoles: Synthesis, structural aspects and catalytic applications

1-(Phenylselenomethyl)-1H-benzotriazole (L¹) and 1-(4-methoxyphenyltelluromethyl)-1H-benzotriazole (L²) have been synthesized by reacting 1-(chloromethyl)-1H-benzotriazole with in situ generated nucleophiles PhSe⁻ and ArTe⁻, respectively. The complexes of L¹ and L² with Pd(II) and Ru(II)(η⁶-p-cymene) have been synthesized. Proton, carbon-13, Se-77 and/or Te-125 NMR spectra authenticate both the ligands and their complexes. The single crystal structures of L¹, L² and [RuCl(η⁶-p-cymene)(L)][PF₆] (L = L¹: 3, L = L²: 4) have been solved. The Ru-Se and Ru-Te bond lengths have been found 2.4801(11) and 2.6183(10) Å, respectively. The palladium complexes, [PdCl₂(L)] (L = L¹: 1, L = L²: 2) have been explored for Heck and Suzuki-Miyaura C-C coupling reactions. The TON values are upto 95,000. The Ru-complexes have been found promising for catalytic oxidation of alcohols (TON ∼ 7.8-9.4 × 10⁴). The complexes of telluroether ligands are as efficient catalysts as those of selenoether ones and in fact better for catalytic oxidation.     

Preparation, structural characterisation and electrochemical properties of iron(0) and tungsten(0) carbonyl complexes with 1-(diphenylphosphanyl)-1′-vinylferrocene and 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene as P-monodentate ligands

A new organometallic phosphanylalkene, 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene (2) was prepared and—together with 1-(diphenylphosphanyl)-1′-vinylferrocene (1)—studied as a ligand in iron- and tungsten-carbonyl complexes. The following complexes featuring the mentioned phosphanylalkenes as P-monodentate donors were isolated and characterised by spectral methods: [Fe(CO)₄(L-κP)] (4, L = 1; 5, L = 2) and trans-[W(CO)₄(L-κP)₂] (6, L = 1; 7, L = 2). In addition, the solid-state structures of 4 and 6 have been determined by single-crystal X-ray diffraction and the electrochemical properties of compounds 1, 2, 4 and 6 were studied by cyclic voltammetry at platinum electrode.     

Chiral self-assembly of triorganotin complexes: Syntheses, characterization, crystal structures and antitumor activity of organotin(IV) complexes containing (R)-(+)-methylsuccinic acid, (S)-(+)-methylglutaric acid and l-(−)-malic acid ligands

Six new chiral triorganotin(IV) complexes, {(R₃Sn)₂[C₃H₆(COO)₂]}_n (R = Me: 1; Bu: 2), {(R₃Sn)₂[C₄H₈(COO)₂]}_n (R = Me: 3; Bu: 4), and {(R₃Sn)₂[C₂H₄O(COO)₂]}_n (R = Me: 5; Bu: 6) have been prepared by treatment of (R)-(+)-methylsuccinic acid, (S)-(+)-methylglutaric acid and l-(−)-malic acid, with the corresponding R₃SnCl (R = Me, Bu) and sodium ethoxide in methanol. All the complexes were characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopy and TGA. Except for 3, all of the complexes were also characterized by X-ray crystallography. The structural analyses reveal that complexes 1 and 5 have 2D network structures in which (R)-(+)-methylsuccinic acid and l-(−)-malic acid act as tetradentate ligands coordinated to trimethyltin(IV) ions. Complexes 2 and 4 have 3D metal-organic framework structures in which the deprotoned acids serve as tetradentate ligands. Complex 6 adopts a 1D zigzag chain structure and forms a 2D supramolecular framework through intermolecular C-H?O interactions. In addition, the antitumor activities of complexes 1-6 have been studied. We also have measured the specific rotation of the chiral dicarboxylic acids and the organotin derivatives.     

Rh-complexes of ditopic bis(pyrazol-1-yl)borate ligands: Assessment of their catalytic activity towards phenylacetylene polymerization

Two dinuclear Rh^I-cyclooctadiene complexes [1,4-(cod)Rh(B(R’)pz₂)-C₆H₄-(B(R’)pz₂)Rh(cod)], linked by a ditopic scorpionate ligand, have been prepared and fully characterized (R′ = Ph (2), C₆F₅ (2^F); pz = pyrazolide). Both compounds were tested as catalysts for phenylacetylene polymerization but showed no catalytic activity. Attempts at the synthesis of corresponding complexes of the sterically more demanding ligands (R′ = Ph (4), C₆F₅ (4^F); pz^Ph = 3-phenylpyrazolide) resulted in B-N bond cleavage and formation of the dinuclear complex [(cod)Rh(μ-pz^Ph)₂Rh(cod)] (5). Complex 5 proved to be an efficient catalyst for the preparation of highly stereoregular head-to-tail cis-transoidal poly(phenylacetylene).     

α,β-(Phosphino)(aminocarbene) and α,ω-(phosphino)(oxyaminocarbene): new bidentate ligands for transition metal complexes

Direct complexation of (amino)(phosphino)carbene 1a and (amino)(oxy)carbene 1b featuring a phosphino group in position-6 to the carbene with [Rh(CO)₂Cl]₂ has been studied. With the 1,2-bidentate ligand 1a, an original cationic complex 2 featuring two (amino)(phosphino)carbenes η²-bonded to the metal has been isolated in 79% yield. In the case of the 1,6-bidentate ligand 1b, a rhodium(I) complex 3 in which the carbene is in trans position relative to the CO ligand was obtained in 85% yield. Both compounds were fully characterized including X-ray diffraction studies.     

Diphenylphosphino(phenyl pyridin-2-yl methylene)amine palladium(II) complexes: Chemoselective alkene hydrocarboxylation initiators

The heteroditopic, P-N-chelating ligand diphenylphosphino(phenyl pyridin-2-yl methylene)amine (1) has been synthesised via a simple ‘one-pot’ procedure and its donor characteristics assessed. The neutral [MX(Y)(1-κ²-P-N)] (3, M = Rh, X = Cl, Y = CO; 4, M = Pd, X = Y = Cl; 5, M = Pd, X = Cl, Y = Me; 6, M = Pt, X = Y = Cl; 7, M = Pt, X = Cl, Y = Me; 8, M = Pt, X = Y = Me) and cationic [Pd(Me)(MeCN)(1-κ²-P-N)][Z] (9, Z = B{3,5-(CF₃)₂-C₆H₃}4; 10, Z = PF₆) complexes of 1 have been prepared and characterised. The solid-state structures of complexes 3, 4, 6 and 7 have been established by X-ray crystallography. Reactions of [PdCl(Me)(1-κ²-P-N)] towards CO and ^tBuNC have been investigated, affording the corresponding η¹-acyl (12) and -iminoacyl (14) complexes, respectively. Similar insertion chemistry is observed for the cationic derivative 9. Treatment of the acyl complex 12 with ethene at elevated pressure establishes an equilibrium between the starting material and the product resulting from insertion, 13. Under catalytic conditions, combination of palladium(II) with 1 in MeOH affords a selective initiator for the formation of 4-oxo-hexanoic acid methyl ester (15) from CO/ethene (38 bar, 90 °C).