Soluble {[Rh2(μ-OOCCH3)2(dbbpy)2][BF4]}n molecular wire and [Rh2(μ-OOCCH3)2(dbbpy)2L2] complexes; dbbpy = 4,4′-di-tert-butyl-2,2′-bipyridine: Synthesis and physicochemical characterization

Binuclear Rh(II) compounds [Rh₂(μ-OOCCH₃)₂(dbbpy)₂(H₂O)₂](CH₃COO)₂ (1) (dbbpy = 4,4′-di-tert-butyl-2,2′-bipyridine), [Rh₂(μ-OOCCH₃)₂(dbbpy)₂(H₂O)₂](BF₄)₂·H₂O·CH₃CN (2), [Rh₂(CH₃COO)₂(C₁₈H₂₄N₂)₂(CH₃CN)₂](BF₄)₂·4CH₃CN (3) and {[Rh₂(μ-OOCCH₃)₂(dbbpy)₂][BF₄]}_n (4) have been synthesized and characterized with spectroscopic methods. Structure of complex 3 has been determined using X-ray crystallography. Rhodium atoms in compound 3 have distorted octahedral coordination with O and N atoms in equatorial positions and Rh atom and CH₃CN molecule in axial coordination sites. Reduction of rhodium(II) compounds with aqueous 2-propanol leads to the formation of polymetallic compound {[Rh₂(μ-OOCCH₃)₂(dbbpy)₂][BF₄]}_n (4) containing [Rh₂]³⁺ core. Compound 4 shows strong antiferromagnetic properties, μ = 0.18–1.73 M.B. in the range 1.8–300 K, J = −597 cm⁻¹. Electrochemistry of compounds 3 and 4 in CH₃CN has been investigated. Compound 4 exhibits a poorly reversible oxidation system at E_1/2 = −0.92 V (ΔE_p = 0.19 V) and in solution in DMF is slowly oxidized to 3 even in total absence of oxygen. Complex 3 is irreversibly oxidized to Rh(III) compound at E_pa = 1.48 V and irreversibly reduced at E_pc = −1.02 V to lead to the unstable polynuclear complex 4 in CH₃CN.     

Interaction of copper(II) and palladium(II) with linked 2,2′-dipyridylamine derivatives: Synthetic and structural studies

Interaction of copper(II) salts with 2,2′-dipyridylamine (1), N-cyclohexylmethyl-2,2′-dipyridylamine (2), di-2-pyridylaminomethylbenzene (3), 1,2-bis(di-2-pyridylaminomethyl)-benzene (4), 1,3-bis(di-2-pyridylaminomethyl)benzene (5), 1,4-bis(di-2-pyridylaminomethyl)benzene (6), 1,3,5-tris(di-2-pyridylaminomethyl)benzene (7) and 1,2,4,5-tetrakis(di-2-pyridylaminomethyl)benzene (8) has yielded the following complexes: [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · H₂O, [Cu₂(4)(NO₃)₄], [Cu₂(5)(NO₃)₄] · 2CH₃OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Cu₄(8)](NO₃)₄] · 4H₂O while complexation of palladium(II) with 1, 4, 5 and 6 gave [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)Cl₄], [Pd₂(4)(OAc)₄], [Pd₂(5)Cl₄], [Pd₂(6)Cl₄] and [Pd₂(6)(OAc)₄] · CH₂Cl₂, respectively. X-ray structures of [Cu(2)(μ-Cl)Cl]₂, [Cu(3)(μ-Cl)Cl]₂ · 2C₂H₅OH, [Cu₂(6)(CH₃OH)₂(NO₃)₄], [Pd(1)₂](PF₆)₂ · 2CH₃OH, [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂ are reported. In part, the inherent flexibility of the respective ligands has resulted in the adoption of a diverse range of coordination geometries and lattice arrangements, with the structures of [Pd₂(4)(OAc)₄] · 4H₂O and [Pd₂(6)(OAc)₄] · 2CH₂Cl₂, incorporating the isomeric ligands 4 and 6, showing some common features. Liquid–liquid (H₂O/CHCl₃) extraction experiments involving copper(II) and 1–3, 5, 7and 8 show that the degree of extraction depends markedly on the number of dpa-subunits (and concomitant lipophilicity) of the ligand employed with the tetrakis-dpa derivative 8 acting as the most efficient extractant of the six ligand systems investigated.     

Syntheses and structures of N-polyfluorophenyl- and N,N′-bis(polyfluorophenyl)ethane-1,2-diaminato(1- or 2-)platinum(II) complexes

The reaction of [PtX₂(L)] (X = Cl, Br, I; L = NH₂CH₂CH₂NY₂; Y = Et, Me) with thallium(I) carbonate and a polyfluorobenzene (RF) in pyridine (py) yields the platinum(II) complexes, [Pt{N(R)CH₂CH₂NY₂}X(py)] (R = C₆F₅, 4-HC₆F₄, 4-BrC₆F₄, or 4-IC₆F₄, Y = Et (1), Me (2), X = Cl, Br or I) in an improved synthesis. From the reaction of [PtCl₂(H₂NCH₂)₂)] with Tl₂CO₃ and 1,2,3,4-tetrafluorobenzene or 2-bromo-1,3,4,5-tetrafluorobenzene in py, the new complexes [Pt(NRCH₂)₂(py)₂] (3) (R = C₆H₂F₃-2,3,6 and C₆HBrF₃-2,3,5,6) have been isolated but the latter preparation also gave product(s) with a 4-bromo-2,3,5-trifluorophenyl group. From an analogous preparation in 4-ethylpyridine (etpy), [Pt(N(4-HC₆F₄)CH₂)₂(etpy)₂] (4) was obtained. The X-ray crystal structures of (3) (R = C₆HBrF₃-2,3,5,6) and (4) were determined as well as that of the previously prepared (3) (R = 4-BrC₆F₄) and a more precise structure of (3) (R = 4-HC₆F₄) has been obtained.     

Preparation and structures of copper(II) and zinc(II) complexes with 5-ferrocenylpyrimidine: Structural variation derived from flexible coordination ability of the ligand and metal ions

5-Ferrocenylpyrimidine (FcPM) reacts with dinuclear copper(II) carboxylates ([Cu₂(RCOO)₄]; R = C₆H₅, C₅H₁₁, CH₃) to produce one-dimensional coordination polymers [Cu₂(C₆H₅COO)₄(FcPM)]_n (1), [Cu₂(C₅H₁₁COO)₄(FcPM)]_n · nCH₃CN (2), and a discrete tetranuclear complex [Cu₂(CH₃COO)₄(FcPM)₂] (3). Compounds 1 and 2 show similar zigzag chain structures, comprising alternate linking of FcPM and dinuclear copper(II) units, whereas the structure of 3 corresponds to the local structural motifs of 1 and 2. Reaction of FcPM with zinc salts (ZnX₂; X = NO₃, SCN) affords zinc-centered ferrocenyl cluster complexes, [Zn(NO₃)₂(FcPM)₃] (4) and [Zn(SCN)₂(FcPM)₂] · 0.5H₂O (5), with varying M:L ratios. FcPM acts as a bidentate ligand in 1 and 2, and as a monodentate ligand in the others.     

Reactions of linked tetrahedron clusters [Co2(CO)6(μ-HC2CH2O)-]2R with Rh2(CO)4Cl2 to give mixed-metal linked alkyne-bridged butterfly clusters containing C2Co2Rh2 unit

The reactions of compound Rh₂(CO)₄Cl₂, 1 with [Co₂(CO)₆(μ-HC₂CH₂O)-]₂R (R = C₆H₄, 2; (COCH₂)₂, 3; C₆H₄-1,4-(CO)₂, 4; (COCH)₂, 5; (CO)₂, 6) in benzene at 60 °C produce five new mixed-metal linked clusters Rh₂Co₂(CO)₁₀(μ₄,η²-HC₂CH₂O-R-OCH₂C₂H-μ)Co₂(CO)₆ (R = C₆H₄, 7a; (COCH₂)₂, 7b; C₆H₄-1,4-(CO)₂, 7c; (COCH)₂, 7d; (CO)₂, 7e) and five known linked octahedral clusters [Rh₂Co₂(CO)₁₀(μ₄,η²-HC₂CH₂O-)]₂R (R = C₆H₄, 8a; (COCH₂)₂, 8b; C₆H₄-1,4-(CO)₂, 8c; (COCH)₂, 8d; (CO)₂, 8e), respectively. Treatment of clusters 7a-8e in benzene at room temperature under air for 24 h with stirring afford the precursor clusters 2-6, respectively. The structure of cluster 7a has been determined by single-crystal X-ray diffraction. The linked cluster 7apossesses two isomers A and B in its structures, the Rh₂(CO)₄ unit inserts into one of two Co-Co bonds and coordinates to the Co₂C₂ core forming one distorted closo-Rh₂Co₂C₂ octahedron framework which is connected to the Co₂C₂ tetrahedron unit via C₆H₄(OCH₂)₂-1,4 as a bridging ligand. All clusters were characterized by C, H elemental analysis, IR and ¹H NMR spectroscopy.     

Synthesis and structural characterization of organotin(IV) carboxylates based on different heterocyclic substituents

Six novel organotin(IV) carboxylates have been successfully synthesized, namely, the polymer (C₆H₅)₃Sn(L1)_∞ (1) [HL1 = 4-imidazolyl benzoic acid], the mononuclear (C₆H₅)₃Sn(L2) (2) [HL2 = 4-pyrazolylbenzoic acid], (C₆H₅)₃Sn(L3)·CH₃OH (3) [HL3 = 4-triazolylbenzoic acid] and (C₆H₅)₃Sn(L4) (4) [HL4 = 4-tetrazolyl benzoic acid] and the tetranuclear [(n-Bu₂Sn)₄(L2)₂O₂(OCH₃)₂] (5) and [(n-Bu₂Sn)₄(L3)₂O₂(OCH₃)₂] (6). X-ray diffraction analyses show 1D infinite chain of polymer 1, single molecular structures of isomorphous complexes 2 and 4, single molecule structures of complex 3 containing solvent CH₃OH molecule and similar ladder-type structures of complexes 5 and 6. The photoluminescence of ligands and 1-6 were also measured in the solid state at room temperature.     

Effect of ring substituents on crystal packing and H-bonding in a series of halobis(phen)copper(II) arylphosphonic acid complexes

The synthesis and crystal structures of five new analogues of the supramolecular copper(II) organophosphonate [Cu^II(phen)₂Cl][(C₆H₅PO(OH)₂)((OH)O₂PC₆H₅)] (1) are presented. The structures contain substituted phenylphosphonic acids, and are of the general formula [Cu^II(phen)₂Cl][(XPO(OH)₂)((OH)O₂PX)] · Z, where X = o-CH₃(C₆H₅) (2); X = p-CH₃(C₆H₅), Z = H₂O · 2CH₃CH₂OH (4); X = o-NO₂(C₆H₅), m-NO₂(C₆H₅) (5); X = m-NO₂(C₆H₅) (6); X = C₁₀H₇ (7).     

Coordination polymers formed by diorganotin dichlorides with 2,5-bis(4-pyridyl)-1,3,4-thiadiazole

Dichlorodimethyltin and dichlorodiphenyltin form 1:1 adducts with 2,5-bis(4-pyridyl)-1,3,4-thiadiazole (L1). Mössbauer spectra of the compounds SnCl₂(CH₃)₂ · L1 (1) and SnCl₂(C₆H₅)₂ · L1 · 0.3CH₂Cl₂ (2) are consistent with a monodimensional polymeric structure containing L1 as a bifunctional bridging ligand. The octahedral coordination geometry at the tin atom is very distorted, with a C-Sn-C bond angle of about 150° for both 1 and 2.     

Ethylene polymerization by 3-oxa-pentamethylene bridged dinuclear metallocene (Ti, Zr)/MAO systems

Two hetero-atom containing bridged dinuclear metallocene complexes, (CpMCl₂)₂(C₅H₄CH₂CH₂OCH₂CH₂C₅H₄) [M = Ti (1), Zr (2)], have been synthesized by treating the disodium salt of the corresponding ligand (C₅H₅CH₂CH₂)₂O with two equivalents of CpTiCl₃ and CpZrCl₃ · DME, respectively, in THF at 0 °C and characterized by ¹H- and ¹³C-NMR, MS and IR spectroscopy. Homogenous ethylene polymerization by those complexes has been conducted systematically in the presence of methylaluminoxane (MAO). The influences of reaction parameters, such as [MAO]/[Cat] molar ratio, catalyst concentration, ethylene pressure, temperature and time, have been studied in detail. The catalytic activities of the dinuclear complexes 1 and 2 were higher than those of (MeCpTiCl₂)₂(C₅H₄CH₂C₆H₄CH₂C₅H₄) (3), (CpZrCl₂)₂(C₅H₄CH₂C₆H₄CH₂C₅H₄) (4) and the mononuclear metallocenes Cp₂TiCl₂ and Cp₂ZrCl₂, respectively. Complex 2 showed high catalytic activity at high temperature (50-100 °C) and high pressure (6 bar). The molecular weight distributions of polyethylene produced by 1 and 2 (MWD = 2.49 and 5.90) were broader than those using the corresponding mononuclear metallocenes (MWD = 2.05 and 2.15). The melting points of the polyethylene produced ranged from 129 to 133 °C, indicating a high linearity and a high crystallinity.     

Coordination and extraction studies of an unexplored bi-functional ligand,carbamoyl methyl pyrazole (CMPz) with uranium(VI), lanthanum(III) and cerium(III) nitrates

The bi-functional carbamoyl methyl pyrazole ligands, C₅H₇N₂CH₂CONBu₂ (L₁), C₅H₇N₂CH₂CONⁱBu₂ (L₂), C₃H₃N₂CH₂CONBu₂ (L₃), C₃H₃N₂CH₂CONⁱBu₂ (L₄) and C₅H₇N₂CH₂CON(C₈H₁₇)₂ (L₅) were synthesized and characterized by spectroscopic and elemental analysis methods. The selected coordination chemistry of L₁ to L₄ with [UO₂(NO₃)₂ · 6H₂O], [La(NO₃)₃ · 6H₂O] and [Ce(NO₃)₃ · 6H₂O] has been evaluated. Structures for the compounds [UO₂(NO₃)₂ C₅H₇N₂CH₂CONBu₂] (6) [UO₂(NO₃)₂ C₅H₇N₂CH₂CONⁱBu₂] (7) and [Ce(NO₃)₃{C₃H₃N₂CH₂CONⁱBu₂}₂] (11) have been determined by single crystal X-ray diffraction methods. Preliminary extraction studies of the ligand L₅ with U(VI) and Pu(IV) in tracer level showed an appreciable extraction for U(VI) and Pu(IV) up to 10 M HNO₃ but not for Am(III). Thermal studies of the compounds 6 and 7 in air revealed that the ligands can be destroyed completely on incineration.     

Synthesis, structural characterization, and reactivity of organolanthanides derived from a new chiral ligand (S)-2-(pyrrol-2-ylmethyleneamino)-2′-hydroxy-1,1′-binaphthyl

Condensation of (S)-2-amino-2′-hydroxy-1,1′-binaphthyl with 1 equiv. of pyrrole-2-carboxaldehyde in toluene in the presence of molecular sieves at 70 °C gives (S)-2-(pyrrol-2-ylmethyleneamino)-2′-hydroxy-1,1′-binaphthyl (1H₂) in 90% yield. Deprotonation of 1H₂ with NaH in THF, followed by reaction with LnCl₃ in THF gives, after recrystallization from a toluene or benzene solution, dinuclear complexes (1)₃Y₂(thf)₂ · 3C₇H₈ (3 · 3C₇H₈) and (1)₃Yb₂(thf)₂ · 3C₆H₆ (4 · 3C₆H₆), respectively, in good yields. Treatment of 1H₂ with Ln[N(SiMe₃)₂]₃ in toluene under reflux, followed by recrystallization from a benzene solution gives the dimeric amido complexes {1-LnN(SiMe₃)₂}₂ · 2C₆H₆ (Ln = Y (5 · 2C₆H₆), Yb (6 · 2C₆H₆)) in good yields. All compounds have been characterized by various spectroscopic techniques, elemental analyses and X-ray diffraction analyses. Complexes 5 and 6 are active catalysts for the polymerization of methyl methacrylate (MMA) in toluene, affording syn-rich poly-(MMA)s.     

New organotin(IV) complexes of nicotinamide, isonicotinamide and some of their novel phosphoric triamide derivatives: Syntheses, spectroscopic study and crystal structures

Three novel phosphoramidate ligands with formula , R = Nicotinamide(nia), R′ = NHC(CH₃)₃(L₁), NH(C₆H₁₁) (L₂); R = isonicotinamide(iso), NH(C₆H₁₁) (L₃) and their new organotin(IV) complexes with formula SnCl₂(CH₃)₂(X)₂, X = L₁ (C₁), L₂ (C₂), L₃ (C₃) plus SnCl₂(CH₃)₂(L₄)₂(C₄), L₄ = isoP(O)[NHC(CH₃)₃]₂, were synthesized and characterized by ¹H, ¹³C, ³¹P,¹¹⁹Sn NMR, IR, UV-Vis spectroscopy and elemental analysis. Two novel complexes of nia and iso with formula SnCl₂(CH₃)₂(X)₂, X = nia (C₅), iso (C₆) were also prepared and all the complexes were spectroscopically studied in comparison to their related ligands and to each other. The crystal structure of complexes C₁, C₃, C₄, and C₅ were determined by X-ray crystallography. -Sn-Cl···H-N- major hydrogen bonds beside other electrostatic interactions produced a three dimensional polymeric cluster in the crystalline lattice of C₁, C₃, C₅ and a two dimensional polymeric chain in C₄. Results showed that coordination of the phosphoramidate ligand (L₄) to Sn in C₄ has been occurred from the nitrogen site of the pyridine ring similar to C_5,C₆ in which there is no PO donor site; however, in C₁ and C₃ the active donor site of corresponding ligands is PO. It seems that in these complexes there is a competition between PO and N_pyridine donor sites and the influential factor which determines the winner site is the type of substituents on phosphorus atom.     

Self assembly of asymmetric tetranuclear Cu(II) [2 × 2] grid-like complexes and of a dinuclear Ni(II) complex from pyridyl-phenol Schiff base ligands

Self assembly of N-salicylidene 2-aminopyridine (L1H) with Cu(NO₃)₂·3H₂O affords [Cu₄(L1)₄(NO₃)₃(CH₃OH)][Cu(L1)(NO₃)₂](2-aminopyridinium)(NO₃)·5CH₃OH (1) which is composed of an asymmetric [2 × 2] grid-like cationic complex that co-crystallizes with a Cu(II) mononuclear anion. This remarkable tetranuclear unit presents three penta-coordinated and one hexa-coordinated Cu(II) sites. This quadruple helicate structure reveals strong anti-ferromagnetic coupling (J = −340(2) cm⁻¹) between Cu(II) ions through a double alkoxo bridge. Reacting L1H with Cu(NO₃)₂·3H₂O in slightly different conditions affords however a more symmetric tetranuclear grid-like complex: [Cu₄(L1)₄(NO₃)₂(OH)₂](2-aminopyridinium)(OH)·CH₃OH) (2). A dinuclear Ni(II) complex, [Ni₂(L2)₂(L2H)₂(NCS)₂(CH₃OH)₂]·2CH₃OH (3), obtained with another related donor ligand (L2H = N-salicylidene 3-aminomethylpyridine) was also prepared.     

Synthesis, coordination studies and redox properties of a novel ditertiary phosphine bearing two ferrocenyl groups

The new ferrocenyl substituted ditertiary phosphine {FcCH₂N(CH₂PPh₂)CH₂}₂ [Fc = (η⁵-C₅H₄)Fe(η⁵-C₅H₅)] (1) was prepared, in 72% yield, by Mannich based condensation of the known bis secondary amine {FcCH₂N(H)CH₂}₂ with 2 equiv. of Ph₂PCH₂OH in CH₃OH. Phosphine 1 readily coordinates to various transition-metal centres including Mo⁰, Ru^II, Rh^I, Pd^II, Pt^II and Au^I to afford the heterometallic complexes {RuCl₂(p-cym)}₂(1) (2), (AuCl)₂(1) (3), cis-PtCl₂(1) (4), cis-PdCl₂(1) (5), cis-Mo(CO)₄(1) (6), trans,trans-{Pd(CH₃)Cl(1)}₂ (7) and trans,trans-{Rh(CO)Cl(1)}₂ (8). In complexes 2, 3, 7 and 8 ligand 1 displays a P,P′-bridging mode whilst for 4-6 a P,P′-chelating mode is observed. All new compounds have been fully characterised by spectroscopic and analytical methods. Furthermore the structures of 1, 2 · 2CH₂Cl₂, 3 · CH₂Cl₂, 4 · CH₂Cl₂, 6 · 0.5CHCl₃ and 8 have been elucidated by single crystal X-ray crystallography. Electrochemical measurements have been undertaken, and their redox chemistry discussed, on both noncomplexed ligand 1 and representative compounds containing this new ditertiary phosphine.     

C-H activation of diphenylphosphinoaryl-derivatives with dimethyltetrakis(trimethylphosphine)iron(II)

Fe(CH₃)₂(PMe₃)₄ reacts with 1-(diphenylphosphino)naphthalene or benzyldiphenylphosphine within 4 h at 20 °C to give the novel metallated methyl iron complexes Fe(CH₃){P(C₆H₅)₂(C₁₀H₆)}(PMe₃)₃ (1) and Fe(CH₃){(C₆H₄)CH₂P(C₆H₅)₂}(PMe₃)₃ (3), respectively, via selective activation of the C-H bond of the pre-chelating ligands. The complexes are thermally unstable releasing metal through a reductive elimination of the aromatic backbone and leading to a C,C-coupling product that is regiospecifically methylated, namely 8-methyl(diphenylphosphino)naphthalene (2). Carbonylation (1 bar, 20 °C, 1 h) of complex 1 effects monosubstitution of a trimethylphosphine ligand trans to the metallated 8-C atom to afford Fe(CH₃){P(C₆H₅)₂(C₁₀H₆)}(CO)(PMe₃)₂ (4). The remaining methyl group in the parent complex 1 reacts with trimethylsilylethyne and tert-butylethyne affording the new complexes 5 and 6 bearing an alkynyl substituent trans to the diphenylphosphino anchoring group. The complexes 1 and 3-6 are diamagnetic and possess octahedral coordination geometry. All novel complexes were fully characterized by spectroscopic methods and by X-ray diffraction.     

Study of ferrocenyl-substituted Co2(CO)6-bispropargylic alcohol complexes as substrates for the formation of chains and macrocycles

Treatment of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = H, R² = CMe(O); R¹ = R² = CMe(O)) with LiCCCH₂OLi (prepared in situ from HCCCH₂OH and n-BuLi) affords the ferrocenyl-substituted but-2-yne-1,4-diol compounds of general formula [Fc-1-R¹-1′-{CR(OH)CCCH₂OH}] (R¹ = R = H (1a); R¹ = H, R = Me (1b); R¹ = CMe(O), R = Me (1c)) in low to high yields, respectively (where Fc = Fe(η⁵-C₅H₄)₂). In the case of the reactions of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = R² = CMe(O)), the by-products [Fc-1-R¹-1′-{CR(OH)(CH₂)₃CH₃}] (R¹ = R = H (2a); R¹ = CMe(O), R = Me (2c)) along with minor quantities of [Fc-1,1′-{CMe(OH)(CH₂)₃CH₃}₂] (3) are also isolated; a hydrazide derivative of dehydrated 2c, [1-(CMeCHCH₂CH₂CH₃)-1′-(CMeNNH-2,4-(NO₂)₂C₆H₃)] (2c′), has been crystallographically characterised. Interaction of 1 with Co₂(CO)₈ smoothly generates the alkyne-bridged complexes [Fc-1-R¹-1′-{Co₂(CO)₆-μ-η²-CR(OH)CCCH₂OH}] (R¹ = R = H (4a); R¹ = H, R = Me(4b); R¹ = CMe(O), R = Me (4c)) in good yield. Reaction of 4a with PhSH, in the presence of catalytic quantities of HBF₄ · OEt₂, gives the mono- [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂OH}] (5) and bis-substituted [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂SPh}] (6) straight chain species, while with HS(CH₂)_nSH (n = 2,3) the eight- and nine-membered dithiomacrocylic complexes [Fc-1-H-1′-{cyclo-Co₂(CO)₆-μ-η²-CH(S(CH₂)_n-)CCCH₂S-}] [n = 2 (7a), n = 3 (7b)] are afforded. By contrast, during attempted macrocyclic formation using 4b and HSCH₂CH₂OCH₂CH₂SH dehydration occurs to give [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-C(CH₂)CCCH₂OH}] (8). Single crystal X-ray diffraction studies have been reported on 2c′, 4b, 4c, 7b and 8.     

Uranyl ion complexes with long chain aminoalcoholbis(phenolate) [O,N,O,O′] donor ligands

The reaction between uranyl nitrate hexahydrate and phenolic ligand precursor [(N,N-bis(2-hydroxy-3,5-dimethylbenzyl)-4-amino-1-butanol) · HCl], H₃L1 · HCl, leads to a uranyl complex [UO₂(H₂L1)₂] (1a) and [UO₂(H₂L1)₂] · 2CH₃CN (1b). The ligand [(N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-4-amino-1-butanol)H₃L2 · HCl], H₃L2 · HCl, yields a uranyl complex with a formula [UO₂(H₂L2)₂] · CH₃CN (2). The ligand [(N,N-bis(2-hydroxy-3,5-dimethylbenzyl)-5-amino-1-pentanol) · HCl], H₃L3 · HCl, produces a uranyl complex with a formula [UO₂(H₂L3)₂] · 2CH₃CN (3) and the ligand [(N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-5-amino-1-pentanol) · HCl], H₃L4 · HCl, leads to a uranyl complex with a formula [UO₂(H₂L4)₂] · 2CH₃CN (4). The ligand [(N,N-bis(2-hydroxy-5-tert-butyl-3-methylbenzyl)-6-amino-1-hexanol) · HCl], H₃L5 · HCl, leads to a uranyl complex with a formula [UO₂(H₂L5)₂] · 4toluene (5). The complexes 1–5 are obtained using a molar ratio of 1:2 (U to L) in the presence of a base (triethylamine). The molecular structures of 1a, 1b, 3, 4 and 5 were verified by X-ray crystallography. All complexes are neutral zwitterions and have similar centrosymmetric, mononuclear, distorted octahedral uranyl structures with the four coordinating phenoxo ligands in an equatorial plane. In uranyl ion extraction studies from water to dichloromethane with ligands H₃L1 · HCl–H₃L5 · HCl, ligands H₃L1 · HCl, H₃L4 · HCl and H₃L5 · HCl are the most effective ones.     

Syntheses, crystal structures of a series of copper(II) complexes and their catalytic activities in the green oxidative coupling of 2,6-dimethylphenol

Three mixed-ligand Cu^II complexes bearing iminodiacetato (ida) and N-heterocyclic ligands, namely, [Cu₂(ida)₂(bbbm)(H₂O)₂] · H₂O (1), [Cu₂(ida)₂(btx)(H₂O)₂] · 2H₂O (2) and [Cu₂(ida)₂(pbbm)(H₂O)₂] · H₂O · 3CH₃OH (3) (bbbm = 1,1^′-(1,4-butanediyl)bis-1H-benzimidazole, btx = 1,4-bis(1,2,4-triazol-1-ylmethyl)benzene, pbbm = 1,1^′-(1,3-propanediyl)bis-1H-benzimidazole), in addition to three fcz-based Cu^II complexes, namely, {[Cu(fcz)₂(H₂O)₂] · 2NO₃}_n (4), {[Cu(fcz)₂(H₂O)] · SO₄ · DMF · 2CH₃OH · 2H₂O}_n (5) and {[Cu(fcz)₂Cl₂] · 2CH₃OH}_n (6) (fcz = 1-(2,4-difluorophenyl)-1,1-bis[(1H-1,2,4-triazol-l-yl) methyl]ethanol) have been prepared according to appropriate synthetic strategies with the aim of exploiting new and potent catalysts. Single crystal X-ray diffraction shows that 1 and 2 possess similar binuclear structures, 3 features a 2D pleated network, and 4 exhibits a 1D polymeric double-chain structure. Complexes 1-6 are tested as catalysts in the green catalysis process of the oxidative coupling of 2,6-dimethylphenol (DMP). Under the optimized reaction conditions, these complexes are catalytically active by showing high conversion of DMP and high selectivity of PPE. The preliminary study of the catalytic-structural correlations suggests that the coordination environment of the copper center have important influences on their catalytic activities.     

Crystal structure, spectroscopy and magnetism of trinuclear nickel(II), cobalt(II) complexes and their solid solution

Four new complexes [Ni₃(μ-L)₆(H₂O)₆](NO₃)₆·6H₂O (1), [Co₃(μ-L)₆(H₂O)₆](NO₃)₆·6H₂O (2), [Ni₃(μ-L)₆(H₂O)₄(CH₃OH)₂](NO₃)₆·4H₂O (3), [Co₃(μ-L)₆(H₂O)₄(CH₃OH)₂](NO₃)₆·4H₂O (4) (L = 4-amino-3,5-dimethanyl-1,2,4-triazole) were synthesized and structurally characterized by X-ray single-crystal diffraction. The structural analyses show that complex 1 and 2 are isomorphous; complex 3 and 4 are isomorphous. Four complexes all consist of the linear trinuclear cations ([M₃(μ-L)₆(H₂O)₆]⁶⁺ (M = Ni,Co) for 1 and 2; [M₃(μ-L)₆(H₂O)₄(CH₃OH)₂]⁶⁺ (M = Ni,Co) for 3 and 4), NO₃⁻ anions and crystallized water molecules. In the trinuclear cations, the central M(II) ions and two terminal M(II) ions are bridged by three triazole ligands. Other eleven solid solution compounds which are isomorphous with complex 3 and 4 were obtained by using different ratio of Ni(II) and Co(II) ions as reactants and ICP result indicates that ligand L has higher selectivity of Ni(II) ions than that of Co(II) ions. The magnetic analysis was carried out by using the isotropic spin Hamiltonian ? = −2J(?₁?₂ + ?₂?₃) (for complexes 1 and 3) and simultaneously considering the temperature dependent g factor (for complexes 2 and 4). Both the UV-Vis spectra and the magnetic properties of the solid solutions can be altered systematically by adjusting the Co(II)/Ni(II) ratio.     

Preparation of hydride complexes of ruthenium with bidentate phosphite ligands

Hydride complex RuH₂(PFFP)₂ (1) [PFFP = (CF₃CH₂O)₂PN(CH₃)N(CH₃)P(OCH₂CF₃)₂] was prepared by allowing the compound RuCl₄(bpy) · H₂O (bpy = 1,2-bipyridine) to react first with the phosphite PFFP and then with NaBH₄. Chloro-complex RuCl₂(PFFP)₂ (2) was also prepared, either by reacting RuCl₄(bpy) · H₂O with PFFP and zinc dust or by substituting triphenylphosphine with PFFP in the precursor complex RuCl₂(PPh₃)₃. Hydride derivative RuH₂(POOP)₂ (3) (POOP = Ph₂POCH₂CH₂OPPh₂) was prepared by reacting compound RuCl₃(AsPh₃)₂(CH₃OH) first with the phosphite POOP and then with NaBH₄. Depending on experimental conditions, treatment of carbonylated solutions of RuCl₃ · 3H₂O with POOP yields either the cis- or trans-RuCl₂(CO)(PHPh₂)(POOP) (4) derivative. Reaction of both cis- and trans-4 with LiAlH₄ in thf affords dihydride complex RuH₂(CO)(PHPh₂)(POOP) (5). Chloro-complex all-trans-RuCl₂(CO)₂(PPh₂OMe)₂ (6) was obtained by reacting carbonylated solutions of RuCl₃ · 3H₂O in methanol with POOP. Treatment of chloro-complex 6 with NaBH₄ in ethanol yielded hydride derivative all-trans-RuH₂(CO)₂(PPh₂OMe)₂ (7). The complexes were characterised spectroscopically and the X-ray crystal structures of complexes 1, 3, cis-4 and 6 were determined.