Synthesis and characterization of triosmium and triruthenium pyrene clusters

The reaction between 1-pyrenecarboxaldehyde (C₁₆H₉CHO) and the labile triosmium cluster [Os₃(CO)₁₀(CH₃CN)₂] gives rise to the formation of two new compounds by competitive oxidative addition between the aldehydic group and an arene C-H bond, to afford the acyl complex [Os₃(CO)₁₀(μ-H)(μ-COC₁₆H₉)] (1) and the compound [Os₃(CO)₁₀(μ-H) (C₁₆H₈CHO)] (2), respectively. Thermolysis of [Os₃(CO)₁₀(μ-H)(μ-C₁₆H₉CO)] (1) in n-octane affords two new complexes in good yields, [Os₃(CO)₉(μ-H)₂(μ-COC₁₆H₈)] (3) and the pyryne complex [Os₃(CO)₉(μ-H)₂(μ₃-η¹:η¹:η²-C₁₆H₈)] (4).In contrast, when 1-pyrenecarboxaldehyde reacts with [Ru₃(CO)₁₂] only one product is obtained, [Ru₃(CO)₉(μ-H)₂(μ₃-η¹:η¹:η²-C₁₆H₈)] (5), a nonacarbonyl cluster bearing a pyrene ligand. All compounds were characterized by analytical and spectroscopic data, and crystal structures for 1, 2, 4 and 5 were obtained.     

Synthesis and characterization of new heterometallic iron sulfur nitrosyl clusters

The reactivity of the (PPN)₂[Fe₈S₆(NO)₈] and (PPN)₂[Fe₆S₆(NO)₆] clusters is explored and new derivative clusters have been synthesized and structurally characterized. The unique (PPN)₂Fe₄S₄(NO)₆ “open-cubane” cluster with a chair like Fe₄S₄ core is obtained along with the mixed metal pentandite-like clusters (PPN)₂[Mo₂Fe₆S₆(NO)₆(CO)₆], (PPr₃)₂Cu₂Fe₆S₆(NO)₆, (PPr₃)₄Cu₄Fe₄S₆(NO)₄, (PPr₃)₂Ni₂Fe₆S₆(NO)₆, (PPr₃)₃Ni₃Fe₄S₆(NO)₄. The rich electrochemistry of the mixed metal clusters is presented as well.     

Synthesis of hydrocarbons from CO and H2 on SiO2 supported iron-cobalt clusters

Bimetallic catalysts (Fe+Co)/SiO₂ were prepared by impregnation of SiO₂ with solutions of carbonyl clusters [FeCo₃(CO)₁₂][(C₂H₅)₄N], [Fe₃Co(CO)₁₃][(C₂H₅)₄N], HFeCo₃(CO)₁₂, [Fe₅CoC(CO)₁₆][(C₂H₅)₄N], and Co₂(CO)₈, Fe(CO)₅. At 20 °C, no reaction occurs between the compounds supported and the surface of the support. The stability of the supported clusters to thermodecarboxylation in a hydrogen atmosphere depends on their composition and is the highest for the catalyst [FeCo₃(CO)₁₂]^–/SiO₂. The catalytic properties of supported clusters in CO hydrogenation are mostly determined by the preactivation technique. The properties of Fe-Co catalysts which were pretreated at high temperatures, are in general similar to those of standard metal catalysts. Product distribution for the same samples prepared without preactivation does not fit the Schulz-Flory equation. The catalyst HFeCo₃(CO)₁₂/SiO₂ favors the formation ofC ₁–C₁₁ hydrocarbons in the temperature range of 468–473 K; the catalyst [Fe₃Co(CO)₁₃]^–/SiO₂ gives ethylene in the temperature range of 453–473 K.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1079–1085, June, 1993.     

簇外环化镍十硼烷簇合物的合成与结构研究

研究了[NiCl~2(PPh~3)~2],B~1~0H~1~0^2^-与硫代苯甲酸的反应,得到四个簇合物,其中三个簇合物[(PPh~3)(PhCOS)~2Ni·B~1~0H~1~0]·0.5C~6H~1~4(1),[(PhCOS)~2NiB~1~0H~8(PPh~3)](2),[(PhCOS)~3NiB~1~0H~7(PPh~3)](3)。通过单晶X射线衍射进行了结构研究。三个簇合物均为十一顶巢式构型,并分别存在两个、两个、三个簇外环化的五元环,具有三个环的簇合物至今未见其它文献报道。结构分析表明：簇外环化可以增强Ni－B之间的成键作用。     

The Electronic and Magnetic Properties of a Few Transition-Metal Clusters

Using density functional theory we present a systematic study of the electronic and magnetic properties of various nickel clusters and two small bimetallic clusters, Ni _n Co _m and Ni _n Fe _m (n + m ≤ 6). A detail study of binding energy, magnetic moment and stability function of pure nickel clusters of nuclearity (N) 40–60 have been performed. We observe that the magic numbers occur at N = 43, 46, 49, 53, 55, and 58, which correspond to the most stable clusters. We find that, with increase in substitution of Co and Fe atoms in Ni cluster, while Ni _n Co _m becomes more stable, the Ni _n Fe _m clusters become less stable. The significant enhancement of average magnetic moment and suppression of local magnetic moment of nickel atoms are found in both clusters with increase in Co and Fe concentration.     

Synthesis and structures of (3-methyl-2-pyridyl)diphenylphosphane derivatives of metal clusters

An unsymmetric bidentate ligand (3-methyl-2-pyridyl)diphenylphosphane (P(Mepy)Ph₂) is able to react with various tetranuclear transition metal clusters such as HRuCo₃(CO)₁₂, HRuRh₃(CO)₁₂ and Rh₄(CO)₁₂. The synthesis and crystal structures of HRuCo₃(CO)₁₀(P(Mepy)Ph₂) (1), HRuRh₃(CO)₁₀(P(Mepy)Ph₂) (2), RuRh₂(CO)₉(P(Mepy)Ph) (3) and Rh₆(CO)₁₄(P(Mepy)Ph₂) (4) are described. In 1, 2 and 4 the phosphane ligand replaces the carbonyls and acts as a bridging bidentate P-N group. The formation of 3 includes degradation of both the metal cluster core and the ligand itself. One of the P-C bonds in the ligand is cleaved and the ligand caps a metal triangle with a bridging phosphido group together with the nitrogen donor. The reaction between dinuclear Rh₂(CO)₄Cl₂ and P(Mepy)Ph₂ gives a binuclear Rh₂(μ-CO)Cl₂(P(Mepy)Ph₂)₂ (5) with bridging ligands in a head-to-tail arrangement. The crystal structure is also given.     

Synthesis of neutral tri- and tetranuclear organometallic clusters of group VIII transition metals

A number of earlier unknown tri- and tetranuclear organometallic clusters of group VIII transition metals was synthesized by the addition of coordinatively unsaturated species to a single metal-metal bond. A number of novel heteronuclear clusters, CpCp ₂ ^′ Rhm₂(μ−CO)₃(μ₃−CO), (Cp′=Cp, Cp^*; M₂=Ru₂, Fe₂; RuFe); Cp₂Cp ₂ ^* Rh₂M₂(μ₃−CO)₃ (M = Ru, Fe); , Cp₃Cp^*Rh₃M(μ₃−CO)₂(μ₃−d) (M = Ru, Fe); Cp₂Cp ₂ ^*> Rh₂Co₂(μ₃−CO)₂,etc., was obtained. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 579–586, March, 1997.     

Synthesis and X-ray crystal structures of new trirhenium nonachloride chalcogenide clusters

The acetone adduct of trirhenium nonachloride, Re₃Cl₉ (acet)₃, where acet=acetone, reacts in acetone solution at room temperature with tetrabutylammonium chalcogenides [N(C₄H₉)₄]₂E, where E=S, Se and Te, producing the tetrabutylammonium salts of the new cluster anions [Re₃ (μ₃-E) (μ₂-Cl)₃Cl₆]²−. In the crystallographically determined structures of these compounds, triangles of rhenium atoms are capped by single chalcogen atoms, giving anions of near C_3v symmetry. The compound where E=S is also formed in the reaction of Re₃Cl₉ with [N(C₄H₉)₄]₂ [MoS₄] by sulfide transfer.     

On some carbon clusters containing sp2- and sp3-hybridized atoms

A new class of thread-like carbon clusters consisting of dodecahedra and containing sp²- and sp³-hybridized atoms is described. Molecular and electronic structures of the simplest representative of this class (the C₁₀₂ cluster) and of the polyhedral C₉₀H₁₂ hydrocarbon molecule, whose carbon framework is identical to the toroidal fragment of the C₁₀₂ cluster, have been calculated by the MNDO and MNDO-PM3 methods.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya. No. 3, pp. 551–553, March, 1996.     

Simulation of the structure of some silicon carbide clusters by the MNDO method

Simulations of the geometric and electronic structure of C₄₄, C₄₅, Si₄₅, C₄₀Si₅, and C₄₄Si clusters were performed by the MNDO method. The geometries of the filled clusters, calculated by the MM2 method, were used as initial approximations. It was found that the filled clusters C₄₅ and C₄₄Si are transformed into endohedral clusters X@C₄₄ (X-C or Si, respectively) after energy optimization. The highest occupied energy level of the HOMO of the filled tetrahedral cluster Si₄₅ ofT symmetry is triply degenerate and is only occupied by four electrons. The structure of Si₄₅ ²⁻ dianion ofT symmetry was calculated. Two filled structures for the C₄₀Si₅ cluster were found. The coordination numbers of the central Si atom in these structures are 4 and 3, respectively. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 54–56, January, 1997.     

Synthesis of big palladium clusters. Preparation of Pd23(CO)20(PEt3)8

Selective methods for the synthesis of the cluster Pd₂₃(CO)₂₀L₈, L=PEt₃, have been suggested. The compound has been prepared by two routes: by the reaction of Pd₁₀(CO)₁₂L₆ with Me₃NO in the presence of HOAc with removal of CO from the gas phase, and by the reaction of Pd₁₀(CO)₁₂L₆ with Pd(OAc)₂ and CO followed by oxidation by Me₃NO in an inert atmosphere.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1299–1300, July, 1993.     

Synthesis, structures and reactivity of triosmium clusters containing terminal pyrazines, bridging hydroxy and methoxycarbonyl ligands

Four triosmium carbonyl clusters bearing terminal pyrazines, bridging hydroxy and methoxycarbonyl ligands of general formula [Os₃(CO)₉(μ-OH)(μ-OMeCO)L] (1, L = pyrazine; 2, L = 2-methylpyrazine; 3, L = 2,3-dimethylpyrazine; 4, L = 2,3,5-trimethylpyrazine) were synthesized by the reactions of [Os₃(CO)₁₂] with the corresponding pyrazine derivatives and water in the presence of a methanolic solution of Me₃NO in moderate yields. Compounds [Os₃(CO)₉(μ-OH)(μ-OMeCO)L] react with a series of two electron donor ligands, L′ at ambient temperature to give [Os₃(CO)₉(μ-OH)(μ-OMeCO)L′] (5, L′ = PPh₃; 6, L′ = P(OMe)₃; 7, L′ = ^tBuNC; 8, L′ = C₅H₅N) in good yields by the displacement of the pyrazine ligands. This implies that the pyrazine ligands in 1–4 are relatively labile. Compounds 2, 3, 4, and 8 were characterized by single crystal X-ray diffraction analyses. All the four compounds possess two metal–metal bonds and a non-bonded separation of two osmium atoms defined by Os(1)Os(3), which are simultaneously bridged by OH and MeOCO ligands and a heterocyclic ligand is terminally coordinated to one of the two non-bonded osmium atoms.     

Synthesis and VT-NMR studies of cationic hydride platinum clusters

The synthesis of three trinuclear platinum hydrides [Pt₃(L-L)₃(H)₃]⁺ (L-L = 1,2-bis(diphenylphosphino)ethane, dppe, l; 1-diphenylphosphino-2-diphenylarsinoethane, dppae. 2; 1,2-bis(diphenylarsino)ethane, dpae, 3) is reported. The complexes were characterized by IR, FAB-MS, and NMR (¹H,³¹P and¹⁹⁵Pt) spectroscopic techniques. The fast exchange of the hydride ligands, observed at ambient temperature, is frozen out at low temperature. The low-temperature¹H and³¹P NMR spectra are consistent with an open array of Pt atoms in the clusters, in keeping with a 16-electron configuration on each platinum atom. Two of the hydride ligands are terminally bonded to two metal centers, whereas the third one is µ₃-coordinated, interacting more tightly with the unique platinum atom.     

Synthesis, crystal structure, hydrogen bonding and spectroscopy of transition-metal complexes with the ligand (N,N′-bis(2-pyridylmethyl)-1,3-propanediamine)

Six mononuclear complexes are reported with the tetradentate ligand N,N′-bis(2-pyridylmethyl)-1,3-propanediamine, (abbreviated as pypn) i.e. [Cu(pypn)(ClO₄)₂](H₂O)_1/2 (1), [Fe(pypn)Cl₂](NO₃) (2), [Zn(pypn)Cl](ClO₄) (3), [Co(pypn)(NCS)₂](ClO₄) (4), [Co(pypn)(N₃)₂](ClO₄) (5), [Zn(pypn)(NCS)₂] (6). The synthesis and X-ray crystal structures of all six compounds and their spectroscopic properties are presented.The geometry of the Cu²⁺, Co³⁺, Zn²⁺, Fe³⁺ ions is essentially octahedrally based, with the mm conformation (for Cu) and m_sf conformations for the other 3 metal ions; in compound 3 the geometry around the Zn²⁺ is distorted trigonal bipyramidal. The stabilisation of the crystal lattices is maintained by interesting, relative strong hydrogen bonds.     

Structures and properties of the tin-doped carbon clusters

A systemic density functional theory study of the tin-doped carbon clusters has been carried out using B3LYP method with TZP+ basis set. For each species, the electronic states, relative energies and geometries of various isomers are reported. Except for smaller SnC₂ and the largest , the Sn-terminated linear or quasi-linear isomer is the most stable structure for clusters. The electronic ground state is alternate between ³Σ (for n-odd member) and ¹Σ (for the n-even member) for linear SnC_n and invariably ²Π for linear and , except for SnC/SnC⁺/SnC⁻,, and . The incremental binding energy diagrams show that strong even–odd alternations in the cluster stability exist for both neutral SnC_n and anionic , with their n-even members being much more stable than the corresponding odd n − 1 and n + 1 ones, while for cationic , the alternation effect is less pronounced. These parity effects also reflect in the ionization potential and electron affinity curves. By comparing with the fragmentation energies accompanying various channels, the most favorable dissociation channel for each kind of the clusters are given. All these results are very similar to those obtained previously for the clusters.     

Synthesis in solid state, structural regularity and reaction mechanism for [VS_4-Cu_n] clusters

The reaction system (NH4)3VS4/CuCl/PPh3/Et4NBr afforded a series of [VS4-Cun] dusters with various core configurations in the solid state at low heating temperature. The structural regularity of [VS4-Cun] dusters and the influence of the CuCl:(NH4)3VS4 ratio as well as that of reaction temperature and time on the formation of duster core have been summarized. The reaction mechanism of forming V-Cu-S clusters has also been explored.     

Synthesis and structures of three 1-aminoethylidenediphosphonate compounds with transition-metal ions

Three new aminodiphosphonates, namely M(phen)(AEDPH₃)₂·4H₂O (M = Zn, (1); Ni, (2)) and Cu(phen)(AEDPH₃)₂·H₂O (4), in addition to the previously reported Co(phen)(AEDPH₃)₂·4H₂O (3), Cu(2,2′-bipy)(H₂O)(HEDPH₂)·2H₂O (5), and Cu(phen)(H₂O)(HEDPH₂)·2H₂O (6) (AEDPH₄ = 1-aminoethylidenediphosphonic acid, HEDPH₄ = 1-hydroxyethylidenediphosphonic acid, phen = 1,10-phenanthroline and 2,2′-bipy = 2,2′-bipyridyl), have been synthesized and characterized. These compounds are all synthesized at the similar condition (80 °C), whereas they illustrate different frameworks. Compounds 1, 2 and 3 are isomorphous, which contain two same chelate and one six-coordinated metal ion, and display a three-dimensional (3D) supramolecular structure through hydrogen bonds and π–π stacking interactions. Compound 4 contains a chelate and a monodentate , while the Cu ion is five-coordinated. The coordination model of Cu²⁺ in 4 is similar to that of 5 and 6. Comparing with four aminoethylidenediphosphonates, the difference of their structures is directed to the coordination model of the metal ions, while the three copper(II) diphosphonates illustrate different structures based on the deprotonized degree of the corresponding diphosphonic acids.     

Short communication: Preparation of Pt13 clusters in the presence of trialkylaluminium

The first wet‐chemical synthesis of a 13‐atom platinum cluster is achieved via the decomposition of dimethyl(1,5‐cyclooctadiene)platinum(II) in the presence of trialkylaluminium. Copyright © 2005 John Wiley & Sons, Ltd.     

Solvent-free Synthesis of Flowable Carbon Clusters with Customizable Size and Tunable Optical Performance

We propose a rapid and solvent-flee route for synthesizing luminous carbon clusters by controlling carbonization of polyethylene glycol （PEG）. This approach does not involve solvents yet uses the precursor itself as suspend- ing medium, thus features mild and green chemistry, and also enables the formation of uniform-sized carbon clus- ters, of which the diameter can be easily tuned from 0.7 to 3.5 nm via control of reaction time. In term of the di- mension, the resultants are denoted as sub-nano carbon clusters （SNCs） and carbon dots （CDs）, respectively. Bene- fiting from surface anchored PEG segments, both of the two show favorable flowability at room temperature and excellent solubility in aqueous and organic solvents. Comparison of their optical performances and structures re- veals that they share the same chromophores. Particularly, the SNCs demonstrate robust photo- and pH-stable pho- toluminescence and can be directly applied to cell-imaging regarding to its prominent biocompatibility. Moreover, its quantum yield （5.5%）, which is approximately 3 times higher than that of CDs （1.5%）, can be dramatically en- hanced to 18.8% by facile chemical reduction. We anticipate that these PEG derivatives marked with easy synthesis, controllable optical performances and excellent physical properties will be highly appealing in future applications.     

Distinguishing metal halide molecular clusters from perovskite magic sized clusters in the synthesis of metal halide perovskite nanostructures

Background

Research into perovskite nanocrystals (PNCs) has uncovered interesting properties compared to their bulk counterparts, including tunable optical properties due to size-dependent quantum confinement effect (QCE). More recently, smaller PNCs with even stronger QCE have been discovered, such as perovskite magic sized clusters (PMSCs) and ligand passivated PbX₂ metal halide molecular clusters (MHMCs) analogous to perovskites.

Objective

This review aims to present recent data comparing and contrasting the optical and structural properties of PQDs, PMSCs, and MHMCs, where CsPbBr₃ PQDs have first excitonic absorption around 520 nm, the corresponding PMSCS have absorption around 420 nm, and ligand passivated MHMCs absorb around 400 nm.

Results

Compared to normal perovskite quantum dots (PQDs), these clusters exhibit both a much bluer optical absorption and emission and larger surface-to-volume (S/V) ratio. Due to their larger S/V ratio, the clusters tend to have more surface defects that require more effective passivation for stability.

Conclusion

Recent study of novel clusters has led to better understanding of their properties. The sharper optical bands of clusters indicate relatively narrow or single size distribution, which, in conjunction with their blue absorption and emission, makes them potentially attractive for applications in fields such as blue single photon emission.