Alkene and alkyne insertion into the Ir-H bond: Synthesis of new mono- and dinuclear alkyl and alkenyl iridium-pybox complexes

The treatment of the complex [Ir(η²-C₂H₄)₂(L)][PF₆] (L = κ³-N,N,N-(S,S)-ⁱPr-pybox) with acetic acid (1:1 molar ratio) at −10 °C affords the complex [Ir(C₂H₅)(κ²-O,O-O₂CCH₃)(L)][PF₆] (1). The dinuclear iridium(III) complex [Ir₂(μ-Cl)₂(C₂H₅)₂(L)₂][PF₆]₂ (2) is stereoselectively obtained by spontaneous intramolecular insertion of ethylene into the iridium-hydride bond of the mononuclear complex [IrClH(η²-C₂H₄)(L)][PF₆]. The single bridging chloride dinuclear derivative [Ir₂(μ-Cl)(C₂H₅)₂Cl₂(L)₂][PF₆] (3) is prepared by reaction of 2 with one equivalent of NaCl. The intramolecular insertion reaction of methyl and ethyl propiolate into the Ir-H bond of the complex [IrClH(MeCN)(L)][PF₆] gives stereoselectively the dinuclear complexes [Ir₂(μ-Cl)₂(HCCHCO₂R)₂(L)₂][PF₆]₂ (R = Me (4), Et (5)). The reaction of the complexes 4, 5 with one equivalent of NaCl or with an excess of sodium acetate yields the dinuclear [Ir₂(μ-Cl)(HCCHCO₂R)₂Cl₂(L)₂][PF₆] (R = Me (6), Et (7)) or the mononuclear [IrCl(HCCHCO₂Et)(κ¹-O-O₂CMe)(L)] (8) complexes, respectively. The structure of the dinuclear complex 3 · CH₂Cl₂ has been determined by an X-ray monocrystal study.     

Synthesis and structure of new compounds with Pt-Ga bonds: Insertion of the bulky gallium (I) bisimidinate Ga(DDP) into Pt-Cl bond

Reactions of the sterically bulky mono-valent group 13 bisimidinate gallium(I), Ga(DDP) (1) (DDP = 2-{(2, 6-diisopropylphenyl)amino}-4-{(2, 6-diisopropylphenyl)imino}-2-pentene, HC(CMeNC₆H₃-2,6-ⁱPr₂)₂) with olefin supported group 10 complexes, [(diene)PtCl₂] [diene = 1,5-cyclooctadiene (COD), endo-dicyclopentadiene (dcy)] and [(COD)Pd(Me)(OTf)] (OTf = O₃SCF₃) are reported. These reactions afforded [(COD)Pt(Cl){ClGa(DDP)}] (2), [(dcy)Pt(Cl){ClGa(DDP)}] (3) and [(DDP)Ga(Me)(OTf)] (4) in moderate yields. Compounds 2-4 were characterized by elemental analysis, NMR (¹H, ¹³C) spectroscopy and also by single crystal X-ray structural analysis. The solid state structures of complexes 2 and 3 reveal the oxidative insertion of Ga(DDP) into the Pt-Cl bond without altering the π-coordinated double bonds in the olefin.     

New diruthenium vinyliminium complexes from the insertion of alkynes into bridging aminocarbynes

Primary alkynes R′CCH [R′ = Me₃Si, Tol, CH₂OH, CO₂Me, (CH₂)₄CCH, Me] insert into the metal-carbon bond of diruthenium μ-aminocarbynes [Ru₂{μ-CN(Me)(R)}(μ-CO)(CO)(MeCN)(Cp)₂][SO₃CF₃] [R = 2,6-Me₂C₆H₃ (Xyl), 1a; CH₂Ph (Bz), 1b; Me, 1c] to give the vinyliminium complexes [Ru₂{μ-η¹:η³-C(R′)CHCN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] [R = Xyl, R′ = Me₃Si, 2a; R = Bz, R′ = Me₃Si, 2b; R = Me, R′ = Me₃Si, 2c; R = Xyl, R′ = Tol, 3a; R = Bz, R′ = Tol, 3b; R = Bz, R′ = CH₂OH, 4; R = Bz, R′ = CO₂Me, 5a; R = Me, R′ = CO₂Me, 5b; R = Xyl, R′ = (CH₂)₄CCH, 6; R = Xyl, R′ = Me, 7a; R = Bz, R′ = Me, 7b; R = Me, R′ = Me, 7c]. The related compound [Ru₂{μ-η¹:η³-C[C(Me)CH₂]CHCN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃], (9) is better prepared by reacting [Ru₂{μ-CN(Me)(Xyl)}(μ-CO)(CO)(Cl)(Cp)₂] (8) with AgSO₃CF₃ in the presence of HCCC(Me)CH₂ in CH₂Cl₂ at low temperature.In a similar way, also secondary alkynes can be inserted to give the new complexes [Ru₂{μ-η¹:η³-C(R′)C(R′)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = Bz, R′ = CO₂Me, 11; R = Xyl, R′ = Et, 12a; R = Bz, R′ = Et, 12b; R = Xyl, R′ = Me, 13). The reactions of 2-7, 9, 11-13 with hydrides (i.e., NaBH₄, NaH) have been also studied, affording μ-vinylalkylidene complexes [Ru₂{μ-η¹:η³-C(R′)C(R″)C(H)N(Me)(R)}(μ-CO)(CO)(Cp)₂] (R = Bz, R′ = Me₃Si, R″ = H, 14a; R = Me, R′ = Me₃Si, R″ = H, 14b; R = Bz, R′ = Tol, R″ = H, 15; R = Bz, R′ = R″ = Et, 16), bis-alkylidene complexes [Ru₂{μ-η¹:η²-C(R′)C(H)(R″)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (R′ = Me₃Si, R″ = H, 17; R′ = R″ = Et, 18), acetylide compounds [Ru₂{μ-CN(Me)(R)}(μ-CO)(CO)(CCR′)(Cp)₂] (R = Xyl, R′ = Tol, 19; R = Bz, R′ = Me₃Si, 20; R = Xyl, R′ = Me, 21) or the tetranuclear species [Ru₂{μ-η¹:η²-C(Me)CCN(Me)(Bz)}(μ-CO)(CO)(Cp)₂]₂ (23) depending on the properties of the hydride and the substituents on the complex. Chromatography of 21 on alumina results in its conversion into [Ru₂{μ-η³:η¹-C[N(Me)(Xyl)]C(H)CCH₂}(μ-CO)(CO)(Cp)₂] (22). The crystal structures of 2a[CF₃SO₃] · 0.5CH₂Cl₂, 12a[CF₃SO₃] and 22 have been determined by X-ray diffraction studies.     

Preparation and reactivity of osmium(II) hydride complexes with phosphites and polypyridyls

Chloro-complexes [OsCl(N-N)P₃]BPh₄ (1, 2) [N-N=2,2^′-bipyridine (bpy) and 1,10-phenanthroline (phen); P=P(OEt)₃ and PPh(OEt)₂] were prepared by allowing OsCl₄(N-N) to react with zinc dust in the presence of phosphites. Treatment of the chloro-complexes 1, 2 with NaBH₄ yielded, in the case of bpy, the hydride [OsH(bpy)P₃]BPh₄ (4) derivatives. Mono-phosphite [OsCl(bpy)₂P]BPh₄ (3) complexes were also prepared by reacting the [OsCl₂(bpy)₂]Cl compound with zinc dust in the presence of phosphite. Protonation reaction of the hydride [OsH(bpy)P₃]⁺ (4) cations with Brønsted acid was studied and led to thermally unstable (above 0 °C) dihydrogen [Os(η²-H₂)(bpy)P₃]²⁺ (4*) derivatives. The presence of the H₂ ligand is supported by variable-temperature NMR spectra and T_1min measurements. Carbonyl [Os(CO)(bpy){P(OEt)₃}₃](BPh₄)₂ (5), nitrile [Os(CH₃CN)(bpy){P(OEt)₃}₃](BPh₄)₂ (6), and hydrazine [Os(bpy)(NH₂NH₂){P(OEt)₃}₃](BPh₄)₂ (7) complexes were prepared by substituting the H₂ ligand in the η²-H₂ (4*) derivatives. Aryldiazene complex [Os(C₆H₅NNH)(bpy){P(OEt)₃}₃](BPh₄)₂ (8) was also obtained by allowing the hydride [OsH(bpy)P₃]BPh₄ to react with phenyldiazonium cation.     

Stereochemistry of the insertion of disubstituted alkynes into the metal aminocarbyne bond in diiron complexes

Terminal alkynes (HCCR^′) (R^′=COOMe, CH₂OH) insert into the metal-carbyne bond of the diiron complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(NCMe)(Cp)₂][SO₃CF₃] (R=Xyl, 1a; CH₂Ph, 1b; Me, 1c; Xyl=2,6-Me₂C₆H₃), affording the corresponding μ-vinyliminium complexes [Fe₂{μ-σ:η³-C(R^′)CHCN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R=Xyl, R^′=COOMe, 2; R=CH₂Ph, R^′=COOMe, 3; R=Me, R^′=COOMe, 4; R=Xyl, R^′=CH₂OH, 5; R=Me, R^′=CH₂OH, 6). The insertion is regiospecific and C-C bond formation selectively occurs between the carbyne carbon and the CH moiety of the alkyne. Disubstituted alkynes (R^′CCR^′) also insert into the metal-carbyne bond leading to the formation of [Fe₂{μ-σ:η³-C(R^′)C(R^′)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R^′=Me, R=Xyl, 8; R^′=Et, R=Xyl, 9; R^′=COOMe, R=Xyl, 10; R^′=COOMe, R=CH₂Ph, 11; R^′=COOMe, R=Me, 12). Complexes 2, 3, 5, 8, 9 and 11, in which the iminium nitrogen is unsymmetrically substituted, give rise to E and/or Z isomers. When iminium substituents are Me and Xyl, the NMR and structural investigations (X-ray structure analysis of 2 and 8) indicate that complexes obtained from terminal alkynes preferentially adopt the E configuration, whereas those derived from internal alkynes are exclusively Z. In complexes 8 and 9, trans and cis isomers have been observed, by NMR spectroscopy, and the structures of trans-8 and cis-8 have been determined by X-ray diffraction studies. Trans to cis isomerization occurs upon heating in THF at reflux temperature. In contrast to the case of HCCR^′, the insertion of 2-hexyne is not regiospecific: both [Fe₂{μ-σ:η³-C(CH₂CH₂CH₃)C(Me)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R=Xyl, 13; R=Me, 15) and [Fe₂{μ-σ:η³-C(Me)C(CH₂CH₂CH₃)CN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R=Xyl, 14, R=Me, 16) are obtained and these compounds are present in solution as a mixture of cis and trans isomers, with predominance of the former.     

Synthesis and X-ray crystallographic characterization of copper and iron complexes with tetradentate-N4 ligands: Reactivity towards catechol oxidation

The reaction of copper chloride dihydrate and ferric chloride hexahydrate with a tripodal N₄ ligand (ntb) under mild conditions affords two novel complexes [Cu(ntb)Cl]₂[CuCl₄] · 2H₂O (1) and [Fe(ntb)Cl₂]Cl · 3H₂O (2). The reaction of ferric chloride with another N₄ ligand, bispicpn, forms an octahedral mononuclear complex, [Fe(bispicpn)Cl₂]Cl (3). Single-crystal X-ray structural studies of 1, 2 and 3 reveal the formation of hydrogen-bond sustained 3D, 2D and 1D networks, respectively, involving (N–HO) and (N–HCl) interactions. The packing arrangement in 2 further reveals the existence of hexagonal channels with helical propagation along the diagonal of the crystallographic b- and c-axes. The reactions of these complexes with 3,5-di-tert-butylcatechol have been studied in dimethylformamide. NMR techniques have been used to identify the reaction products.     

Syntheses of new Mo(II) and W(II) mono(hydrosulfido) complexes and their conversion into di- and tetranuclear sulfido-bridged heterobimetallic complexes

Treatment of [Cp′MH(CO)₃] (M = Mo, W; Cp′ = η⁵-C₅H₅ (Cp), η⁵-C₅Me₅ (Cp*)) with 1/8 equiv of S₈ in THF, followed by the reaction with dppe under UV irradiation, gave new mono(hydrosulfido) complexes [Cp′M(SH)(CO)(dppe)] (Cp′ = Cp: M = Mo (5), W (6); Cp′ = Cp*: M = Mo (7), W (8); dppe = Ph₂PCH₂CH₂PPh₂). When 5 and 6 dissolved in THF were allowed to react with [RhCl(PPh₃)₃] in the presence of base, heterodinuclear complexes with bridging S and dppe ligands [CpM(CO)(μ-S)(μ-dppe)Rh(PPh₃)] (M = Mo (9), W(10)) were obtained. Semi-bridging feature of the CO ligands were also demonstrated. Upon standing in CH₂Cl₂ solutions, 9 and 10 were converted further to the dimerization products [(CpM)₂{Rh(dppe)}₂(μ₂-CO)₂(μ₃-S)₂] (M = Mo (13), W). Detailed structures of mononuclear 7 and 8, dinuclear 9 and tetranuclear 13 have been determined by the X-ray diffraction.     

Insertion of polar and nonpolar unsaturated molecules into carbon-rhenium bonds generated by C-H bond activation: synthesis of phthalimidine and indene derivatives

A rhenium complex, [ReBr(CO)(3)(thf)](2), catalyzes the reaction of an aromatic aldimine with an isocyanate and an acetylene to give a phthalimidine and an indene derivative in a quantitative yield, respectively. The reactions proceed via C-H bond activation, insertion of the isocyanate or the acetylene, intramolecular nucleophilic cyclization to the aldimine of the generated amido- or alkenyl-rhenium species, and reductive elimination. In contrast to ruthenium and rhodium catalysts, which are usually employed in this type of reaction, the rhenium catalyst promotes the insertion of a polar unsaturated molecule. This occurs more easily than the insertion of a nonpolar unsaturated molecule.     

Photochemical reactions of alkynyl iron (II) complexes with carbon disulfide. Insertion of CS2 into an iron-C(sp) bond

The novel alkynyldithiocarboxylate complexes [Fe(η⁵-C₅H₅)(S₂CCCR) (dppm-P)] (3a,b) and [Fe(η₅-C₅H₅)(S₂CCCR)(PPh₃)] (4a,b) were obtained through the insertion of CS₂ into the iron-akynyl bond in the complexes [Fe(η₅-C₅H₅)(CCR)(L)(L′] L, L′ = dppm R = Ph (1a), ^tBu(1b); L = (CO), L′ = (PPh₃) R = Ph (2a), ^tBu (2b). Variable-temperature ³¹P{¹H} NMR studies indicate the presence of two different isomers, [Fe(η⁵-C₅H₅)(η³-S,C,S′---S₂CCCR)(L)(L′)] and [Fe(η⁵-C₅H₅(η²-S,S′-S₂CCCR)(L)(L′)], which rapidly interconvert at room temperature. The synthesis of the precursor complex [Fe(η⁵-C₅H₅)(CC^tBu)(CO)(PPh₃)] is also described.     

Reactivity of diacetylplatinum(II) complexes: Oxidative addition of halogens and hydrogen halides

Diacetylplatinum(II) complexes [Pt(COMe)₂()] ( = bpy, 3a; 4,4′-t-Bu₂-bpy, 3b), obtained by the reaction of [Pt(COMe)₂X(H)()] with NaOH in CH₂Cl₂/H₂O, were found to undergo oxidative addition reactions with halogens (Br₂, I₂) yielding the platinum(IV) complexes (trans, OC-6-13)/(cis, OC-6-32) [Pt(COMe)₂X₂()] ( = bpy, X = Br, 4a/4b; I, 4c/4d;  = 4,4′-t-Bu₂-bpy, X = Br, 4e/4f; I, 4g/4h). The diastereoselectivity of the reactions proved to be strongly dependent on the solvent. The oxidative addition of (SCN)₂ resulted in the formation of (OC-6-13)-[Pt(COMe)₂(SCN)₂()] ( = bpy, 4i; 4,4′-t-Bu₂-bpy, 4j). In a reaction the reverse of their formation, the diacetylplatinum(II) complexes 3 underwent oxidative addition with anhydrous HX (X = Cl, Br, I), prepared in situ from Me₃SiX/H₂O, yielding diacetyl(hydrido)platinum(IV) complexes [Pt(COMe)₂X(H)()] ( = bpy, X = Cl, 5a; Br, 5b; I, 5c;  = 4,4′-t-Bu₂-bpy, X = Cl, 5d; Br, 5e; I, 5f). Furthermore, diacetyldihaloplatinum complexes 4 were found to undergo reductive elimination reactions in boiling methanol yielding acetylplatinum(II) complexes [Pt(COMe)X()] ( = bpy, X = Br, 6b; I, 6c;  = 4,4′-t-Bu₂-bpy, X = Br, 6e; I, 6f). All complexes were characterized by microanalysis, IR and ¹H and ¹³C NMR spectroscopy. Additionally, the bis(thiocyanato) complex 4j was characterized by single-crystal X-ray diffraction analysis.     

Insertion reactions of phenyl isocyanate into hafnium nitrogen bonds: synthesis and reactivity of hafnium complexes bearing substituted pyrrolyl ligands

A bis(diethylamido)hafnium compound [C₄H₃N(CH₂NMe₂)-2]₂Hf(NEt₂)₂ (1) has been prepared in 79% yield by reacting Hf(NEt₂)₄ with 2 equiv. of [C₄H₃NH(CH₂NMe₂)-2] in heptane via deamination. Reacting compound 1 with 2 equiv. of phenyl isocyanate at room temperature in diethyl ether results in the PhNCO being inserted seletively into hafnium-NEt₂ bonds to generate [C₄H₃N(CH₂NMe₂)-2]₂Hf[PhNC(NEt₂)O]₂ (2) in 56% yield. Similarly, while reacting 1 with 2 equiv. of phenyl isocyanate for a week in toluene produces a mixture of 2 and [C₄H₃N(CH₂NMe₂)-2]Hf[PhNC(NEt₂)O]₃ (3). For comparison, reacting Hf(NEt₂)₄ with 4 equiv. of PhNCO in a toluene solution at room temperature results in the PhNCO inserted into Hf-N bonds, and forms a tetrakis-ureato hafnium compound Hf[PhNC(NEt₂)O]₄ (4) in 88% yield. A theoretical calculation found that the unpaired electrons of the ureato fragments of 2 are resonance delocalized between the C-O, C-NPh, and C-NEt₂ bonds, which are all partially doubly bonded.     

Genistein complexes with amines. Part II: ab initio study of the complexes with piperazine and triethylamine

The piperazine and triethylamine complexes of genistein, exhibiting high immunosuppressant activity, were ab initio modeled at RHF/6-31G^** level and results were compared with those obtained for genistein–morpholine complexes by X-ray, NMR, and theoretical methods. The most stable genistein–piperazine complex is formed due to hydrogen bonding of genistein's OH group at position C7 to piperazine's nitrogen atom. In the most stable genistein–triethylamine complex genistein's OH group at position C4′ (position para to phenyl substituent) and trimethylamine nitrogen atom are engaged in hydrogen bond formation. The calculations confirmed our previous NMR conclusion that piperazine is more strongly complexed by genistein than is morpholine or triethylamine. The theoretical ¹³C NMR spectra correlate fairly well with the experimental spectra.     

Molecular mechanics modelling of Pt(II) complexes with antitumor activity. Influence of the type and the positions of the ring substituents on the conformational energies and thermodynamic stabilities

Summary The influence of the type and the positions of the ring substituents on the conformational energies and thermodynamic stabilities of a series of Pt(II) complexes of the general formula [1,2-bis(hydroxyphenyl)ethylenediamine]PtL ₂(L ₂=2Cl^–, 2I^–, SO ₄ ^2– ) has been studied by molecular mechanics. The calculations were carried out for the ligand conformations (R,S/S,R)-, (R,S/S,R)-, (R,R)-, and (S,S)-. The obtained energies and thermodynamic stabilities are in agreement with experimental data on the reactivity and antitumor activity of the compounds.

---

Molecular Modelling von Pt(II)-Komplexen mit Antitumoraktivität. Einfluß von Art und Position von Substituenten auf Konformationsenergien und thermodynamische Stabilitäten

Zusammenfassung Die konformationellen Energien und thermodynamischen Stabilitäten einer Reihe von Pt(II)-Komplexen mit der allgemeinen Formel [1,2-bis(Hydroxyphenyl) ethylendiamin]PtL ₂(L ₂=2Cl^–, 2I^–, SO ₄ ^2– ) wurden mittels molekularmechanischer Methoden in Abhängigkeit von Art und Stellung der Substituenten an den Phenylringen untersucht. Die Berechnungen wurden für die Ligandenkonformationen (R,S/S,R)-, (R,S/S,R)-, (R,R)- und (S,S)- durchgeführt. Die erhaltenen Energien und Stabilitäten stimmen mit experimentellen Daten über Reaktivität und Antitumoraktivität der Verbindungen überein.

     

Using ligand exchange reactions to control the coordination environment of Pt(II) acetylide complexes: applications to conjugated metallacyclynes

Ligand exchange of cis-bis(diphenylphosphino)ethylene (dppee) with trans-(Ph₃P)₂Pt(CCR)₂ easily generates the cis-complexes (dppee)Pt(CCR)₂ in 64-95% yield. This transformation is used to convert pyridine-containing macrocycle 7 to its cis-analogue 8 and the macrocyclic bipyridine analogue 10 to the unique macrocyclic ligand 11. X-ray structural characterization of trans-complexes 5a and 5b and cis-complexes 6a and 6b are reported, as is the structure of the strained macrocycle 8.     

Transition metal promoted reactions of unsaturated hydrocarbons : II. Insertion of bicyclic olefins into allylic-palladium and -platinum bonds

Addition of strained olefins, based on norbornene, norbornadiene,benzonorbornadiene or bicyclo [2.2.2] octene skeletons to π-allylic(hexafluoroacetylacetonato) palladium(II) complexes [(π-All)Pd(Hfacac)], gives “enyl” products derived from “insertion” of the olefin into the least substituted terminal allylicpalladium bond. The reaction involves an initial rapid and reversible formation of (gs-allyl)(π-olefin)Pd(Hfacac). The rate-determining step involves migration of a σ-allylic carbon atom from Pd to the coordinated olefin in a concerted cis—exo addition of PdC across the double bond. Remote electronegative substituents on the olefin do not affect the coordinative ability of the olefin towards Pd. They do however inhibit the migration of the σ-allylic ligand to the coordinated olefin. This observation is interpreted in terms of a small degree of polarization of the π-olefin—Pd bond in the transition state for the σ-allyl migration.     

Studies on organolanthanide complexes : LXIII. Synthesis, spectroscopic and X-ray crystallographic characterization of new early organolanthanide, organoyttrium hydride and organoholmium hydroxide complexes

Organolanthanide chloride complexes [(CH₃OCH₂CH₂C₅H₄)₂Ln(μ-Cl)]₂ (Ln = La, Pr, Ho and Y) react with excess NaH in THF at 45°C to give the dimeric hydride complexes [(CH₃OCH₂CH₂C₅H₄)₂Ln(μ-H)]₂, which have been characterized by IR, ¹H NMR, MS and XPS spectroscopy, elemental analyses and X-ray crystallography. [(CH₃OCH₂CH₂C₅H₄)₂Y(μ-H)]₂ crystallizes from THF/n-hexane at −30°C, in the triclinic space group P1 with a = 8.795(2) Å, b = 11.040(1) Å, c = 16.602(2) Å, = 93.73(1)°, β = 91.82(1)°, γ = 94.21(1)°, D_c = 1.393 gcm⁻³ for Z = 2 dimers. However, crystals of [(CH₃OCH₂CH₂C₅H₄)₂Ho(μ-OH)]₂ were obtained by recrystallization of holmium hydride in THF/n-hexane at −30°C, in the orthorhombic space group Pbca with a = 11.217(2) Å, b = 15.865(7) Å, c = 17.608(4) Å, D_c = 1.816 gcm⁻³ for Z = 4 dimers. In the complexes of yttrium and holmium, each Ln atom of the dimers is coordinated by two substituted cyclopentadienyl ligands, one oxygen atom and two hydrogen atoms (for the Y atom) or two hydroxyl groups (for the Ho atom) to form a distorted trigonal bipyramid if the C(η⁵)-bonded cyclopentadienyl is regarded as occupying a single polyhedral vertex.     

Chemistry of vinylidene complexes. XX. Intramolecular carbonylation of vinylidene on the MnFe center: Spectroscopic and structural study. X-ray structure of the new trimethylenemethane type MnFe complex

Reactions of Fe₂(CO)₉ with Cp(CO)₂MnCCHPh (1) and Cp(CO)(PPh₃)MnCCHPh (3) gave the heterometallic trimethylenemethane complexes η⁴-{C[Mn(CO)₂Cp](CO)CHPh}Fe(CO)₃ (2) and η⁴-{C[Mn(CO)(PPh₃)Cp](CO)CHPh}Fe(CO)₃ (4), respectively. The formation of the benzylideneketene [PhHCCCO] fragment included in complexes 2 and 4 occurs via intramolecular coupling of the carbonyl and vinylidene ligands. The structures of 3 and 4 were determined by single crystal XRD methods. The influence of the nature of the L ligands at the Mn atom on the structural and spectroscopic characteristics of η⁴-{C[Mn(CO)(L)Cp](CO)CHPh}Fe(CO)₃ (L = CO (2), PPh₃ (4)) is considered. According to the VT ¹H and ¹³C NMR spectra, complex 2 reversibly transforms in solution into μ-η¹:η¹-vinylidene isomer Cp(CO)₂MnFe(μ-CCHPh)(CO)₄ (2a), whereas complex 4 containing the PPh₃ ligand is not able to a similar transformation.