An efficient transition metal-free aziridination of alkenes with Chloramine-T using aqueous H2O2/HBr

The combination of aqueous H₂O₂ and HBr was found to be an efficient transition metal-free green catalytic system for the aziridination of a variety of alkenes under very mild reaction conditions.     

Na4H3[SiW9Al3(H2O)3O37]·12H2O/H2O: a new system for selective oxidation of alcohols with H2O2 as oxidant

This work describes a catalytic system consisting of both Na₄H₃[SiW₉Al₃(H₂O)₃O₃₇]·12H₂O(SiW₉Al₃) and water as solvents (a small quantity of organic solvents were used as co-solvent for a few substrates) that can be good for selective oxidation of alcohols to ketones (aldehydes) using 30% H₂O₂ without any phase-transfer catalyst under mild reaction conditions. The catalyst system allows easy product/catalyst separation. Under the given conditions, the secondary hydroxyl group was highly chemoselectively oxidized to the corresponding ketones in good yields in the presence of primary hydroxyl group within the same molecule, and hydroxides are selectively oxidized even in the presence of alkene. Benzylic alcohols were selectively oxidized to the corresponding benzaldehydes in good yields without over oxidation products in solvent-free conditions. Nitrogen, oxygen, sulfur-based moieties, at least for the cases where these atoms are not susceptible to oxidation, do not interfere with the catalytic alcohol oxidation.     

cis-Enhanced cyclopropanation catalysts: reaction chemistry of three isomers of Rh2[N(C6H5)COCH3]4

The catalytic activities of three structural isomers of Rh₂[N(C₆H₅)COCH₃]₄ in cyclopropanation reactions were surveyed. These studies showed cis cyclopropanation selectivity with bulky alkenes for 2,2-cis- and 2,2-trans-Rh₂[N(C₆H₅)COCH₃]₄.     

AuAg bimetallic nanoparticles film fabricated based on H2O2-mediated silver reduction and its application

A method to fabricate AuAg bimetallic nanoparticles film by H₂O₂-mediated reduction of silver was reported. Gold nanoparticles (Au NPs) were first adsorbed onto the surface of a self-assembled 2-aminoethanethiol monolayer-modified gold film or 3-aminopropyltriethoxysilane (APTES) monolayer-modified quartz slide. Upon further treatment of this modified film with the solution containing silver nitrate (AgNO₃) and H₂O₂, silver was deposited on the surface of Au NPs. The size of the AuAg bimetallic particles could be readily tuned by manipulating the concentration of H₂O₂. Surface plasmon resonance (SPR) was used to investigate the process, the deposition of silver on Au NPs modified gold film resulted in an obvious decrease of depth in the SPR reflectance intensity and minimum angle curves (SPR R-θ curves), which may be utilized for the quantitative SPR detection of the analyte, H₂O₂. Combination of the biocatalytic reaction that could yield H₂O₂ by using the enzyme, glucose oxidase, with the deposition of silver may enable the design of a glucose biosensor by SPR technique. Furthermore, we evaluated the AuAg bimetallic nanoparticles film for their ability to be an effective substrate for surface-enhanced Raman scattering (SERS).     

Aerobic alcohol oxidation using a PdCl2/N,N-dimethylacetamide catalyst system under mild conditions

A new and simple PdCl₂/DMA catalytic system for the alcohol oxidation has been developed using molecular oxygen as the sole oxidant under mild conditions. The catalytic system could be reused for three runs without significant loss of catalytic activity. A variety of active and non-active alcohols were oxidized to their corresponding carbonyl compounds in good to excellent yields. Gas-uptake kinetics for the catalytic system was also investigated. The ca. 1:1 molar ratio of O₂ uptake to product yield is observed, suggesting the in situ formation of H₂O₂.     

Pd(111), Pd(100)及Pd(110)表面H2和O2直接合成H2O2的密度泛函理论研究

采用周期性密度泛函理论研究了H₂和O₂在Pd(111),Pd(100)及Pd(110)表面上直接合成H₂O₂的反应机理,对反应的主要基元步骤进行了计算和分析.结果表明,Pd(111)表面对H₂O₂直接合成的催化选择性最好,表面原子密度较低的Pd(100)表面和Pd(110)表面上含有O-O键的表面物种解离严重,不利于H₂O₂的生成.H₂O₂的选择性与含有O-O键表面物种的O-O键能和表面物种的结合能有关.含有O-O键的表面物种在表面的结合能越大,越容易发生解离,不利于形成H₂O₂.     

Catalytic behavior of Al2O3-TiO2 supported Pd-Ru bimetallic catalyst for the partial hydrogenation of palm oil

Summary Al₂O₃-TiO₂ supported Pd-Ru bimetallic catalysts were prepared and characterized by X-ray photoelectron spectroscopy and X-ray diffraction (XRD) techniques. The catalytic system was evaluated in the partial hydrogenation of palm oil. Based on these results, it was deduced that core-shell model particles, with Ru cores, would be most likely formed in the bimetallic catalysts. As a result, the dispersing effect of ruthenium on palladium and the charge transfer from ruthenium to palladium may be closely related to the excellent catalytic performance. Besides, the highly dispersed TiO₂ on γ-alumina support seems to be crucial for inhibiting the formation of trans fatty acid.     

Conversion of NO in NO/N2, NO/O2/N2, NO/C2H4/N2 and NO/C2H4/O2/N2 Systems by Dielectric Barrier Discharge Plasmas

An experimental study on the conversion of NO in the NO/N₂, NO/O₂/N₂, NO/C₂H₄/N₂ and NO/C₂H₄/O₂/N₂ systems has been carried out using dielectric barrier discharge (DBD) plasmas at atmospheric pressure. In the NO/N₂ system, NO decomposition to N₂ and O₂ is the dominating reaction; NO conversion to NO₂ is less significant. O₂ produced from NO decomposition was detected by an on-line mass spectrometer. With the increase of NO initial concentration, the concentration of O₂ produced decreases at 298 K, but slightly increases at 523 K. In the NO/O₂/N₂ system, NO is mainly oxidized to NO₂, but NO conversion becomes very low at 523 K and over 1.6% of O₂. In the NO/C₂H₄/N₂ system, NO is reduced to N₂ with about the same NO conversion as that in the NO/N₂ system but without NO₂ formation. In the NO/C₂H₄/O₂/N₂ system, the oxidation of NO to NO₂ is dramatically promoted. At 523 K, with the increase of the energy density, NO conversion increases rapidly first, and then almost stabilizes at 93–91% of NO conversion with 61–55% of NO₂ selectivity in the energy density range of 317–550 J L⁻¹. It finally decreases gradually at high energy density. A negligible amount of N₂O is formed in the above four systems. Of the four systems studied, NO conversion and NO₂ selectivity of the NO/C₂H₄/O₂/N₂ system are the highest, and NO/O₂/C₂H₄/N₂ system has the lowest electrical energy consumption per NO molecule converted.     

Alkane oxygenation with H2O2 catalysed by FeCl3 and 2,2′-bipyridine

The H₂O₂-FeCl₃-bipy system in acetonitrile efficiently oxidises alkanes predominantly to alkyl hydroperoxides. Turnover numbers attain 400 after 1 h at 60 °C. It has been assumed that bipy facilitates proton abstraction from a H₂O₂ molecule coordinated to the iron ion (these reactions are stages in the catalytic cycle generating hydroxyl radicals from the hydrogen peroxide). Hydroxyl radicals then attack alkane molecules finally yielding the alkyl hydroperoxide.     

Bimetallic single-source precursors [M(NH3)4][Co(C2O4)2(H2O)2]·2H2O (M = Pd, Pt) for the one run synthesis of CoPd and CoPt magnetic nanoalloys

All the steps of the proposed technique, from the synthesis of single-source precursors to the preparation of CoPd and CoPt nanoalloys, are described. The double complex salts (DCS) [M(NH₃)₄][Co(C₂O₄)₂(H₂O)₂]·2H₂O (M = Pd, Pt), which were synthesized by mixing solutions containing [M(NH₃)₄]²⁺ cations and [Co(C₂O₄)₂(H₂O)₂]²⁻ anions, have been used as precursors. The salts obtained were characterized by IR spectroscopy, thermal analysis, XRD and single crystal X-ray diffraction. The prepared compounds crystallize in the monoclinic (space group I2/m, M = Pd) and orthorhombic (space group I222, M = Pt) crystal systems. Thermal decomposition of the salts in helium or hydrogen atmosphere at 200-600 °C results in the formation of nanoalloys powders (random solid solution Co_0.50Pd_0.50 and chemically ordered CoPt). The size of the bimetallic particles varied from 5 to 20 nm. Order-disorder structural transformations in Co_0.50Pt_0.50 nanoalloys were studied. The magnetic properties of both chemically disordered Co_0.50Pd_0.50 and ordered CoPt clusters have also been measured.     

Characterization and evaluation of Fe2O3/Al2O3 oxygen carrier prepared by sol–gel combustion synthesis

The sol-gel combustion synthesis (SGCS) for oxygen carrier (OC) to be used in chemical looping combustion (CLC) was first designed and experimented in this work, which is a new method of OC synthesis by combining sol-gel technique and solution combustion synthesis. Cheap hydrated metal nitrates and urea were adopted as precursors to prepare Fe₂O₃/Al₂O₃ OC at the molar ratio to unity (Fe1Al1), which was characterized through various means, including Fourier transforms infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), differential thermal analysis (DTA), X-ray diffractor (XRD), and N₂ isothermal adsorption/desorption method. FTIR analysis on the chemical structure of the dried gel of Fe1Al1 indicated that urea was partly hydrolyzed and the hydrated basic carbonate was formed by the combination of groups such as (Fe(_1−yAl_y)_1−xO_1−3x, CO₃²⁻ and -OH-. By analyzing the staged products during SGCS, calcination was found as a necessary step to produce Fe₂O₃/Al₂O₃ OC with separate phases of α-Fe₂O₃ and α-Al₂O₃. Through TGA-DTA, the decomposition of the dried gel was found to undergo five stages. The analysis of the evolved gases from the gel decomposition using FTIR partially confirmed the staged decomposition and assisted a better understanding of the mechanism of SGCS. XRD identification further substantiated the necessity of calcination to synthesize Fe₂O₃/Al₂O₃ OC with separate phases of α-Fe₂O₃ and α-Al₂O₃, though it was not necessary for the synthesis of single phase α-Fe₂O₃ and α-Al₂O₃. Structural characterization performed on N₂ adsorption analyzer displayed that the pore shape of Fe1Al1 particles was heterogeneous. Finally, H₂ temperature-programmed reduction (TPR) of Fe1Al1 products in TGA indicated that the reduction reaction of Fe1Al1 OC after calcination was a single step reaction from α-Fe₂O₃ to Fe, and calcination benefited to improve the transfer rate of the lattice oxygen from the OC to fuel H₂. Furthermore, four times of reduction and oxidization (redox) reaction by alternating with H₂ and air demonstrated the synthesized OC had good reactivity and sintering-resistance, much suitable to be used in the realistic CLC. Overall, the SGCS method was found superior to other existent methods to prepare Fe₂O₃/Al₂O₃ OC for CLC application.     

Elucidation of methyl tert-butyl ether degradation with Fe/H2O2 by purge-and-trap gas chromatography-mass spectrometry

Degradation of methyl tert-butyl ether (MTBE) with Fe²⁺/H₂O₂ was studied by purge-and-trap gas chromatography-mass spectrometry. MTBE was degraded 99% within 120 min under optimum conditions. MTBE was firstly degraded rapidly based on a Fe²⁺/H₂O₂ reaction and then relatively slower based on a Fe³⁺/H₂O₂ reaction. The dissolved oxygen decreased rapidly in the Fe²⁺/H₂O₂ reaction stage, but showed a slow increase in the Fe³⁺/H₂O₂ reaction stage. tert-Butyl formate, tert-butyl alcohol, methyl acetate and acetone were identified as primary degradation products by mass spectrometry. A preliminary reaction mechanism involving two different pathways for the degradation of MTBE with Fe²⁺/H₂O₂ was proposed. This study suggests that degradation of MTBE can be achieved using the Fe²⁺/H₂O₂ process.     

Pd-Cu/γ-Al2O3催化苯乙炔选择性加氢反应

为了提高苯乙炔加氢反应中的苯乙烯选择性, 本文采用“胶体-等体积浸渍”两步法制备了Pd-Cu/γ-Al₂O₃双金属催化剂. 利用高分辨率透射电镜(HRTEM)、X射线光电子能谱(XPS)、CO脉冲化学吸附、N2物理吸附、电感耦合等离子体原子发射光谱(ICP-AES)等技术表征了Pd-Cu/γ-Al₂O₃的结构性质, 考察了Cu/Pd 摩尔比、Pd负载量以及金属引入顺序对Pd-Cu/γ-Al₂O₃催化苯乙炔选择性加氢性能的影响. 结果表明, 与Pd/γ-Al₂O₃单金属催化剂相比, Pd-Cu/γ-Al₂O₃的苯乙烯选择性大幅度提高, 尤其是当Pd负载量为0.3%(w), 且Cu/Pd摩尔比为0.6时, Pd-Cu/γ-Al₂O₃表现出优异的加氢选择性; 在0.1 MPa和40 ℃下, 当苯乙炔转化率为90%时, 双金属催化剂的苯乙烯选择性可达95%; 当转化率达到99%以上时, 苯乙烯选择性仍保持在82%左右. 分析表明, Pd-Cu/γ-Al₂O₃中形成了Pd-Cu合金, 但是两种金属间不存在电子转移, Cu对Pd的几何效应才是导致Pd-Cu/γ-Al₂O₃苯乙烯选择性增加的主要原因.     

[Ni(H2O)4]3[U(OH,H2O)(UO2)8O12(OH)3], crystal structure and comparison with uranium minerals with U3O8-type sheets

The new U(VI) compound, [Ni(H₂O)₄]₃[U(OH,H₂O)(UO₂)₈O₁₂(OH)₃], was synthesized by mild hydrothermal reaction of uranyl and nickel nitrates. The crystal-structure was solved in the P-1 space group, a=8.627(2), b=10.566(2), c=12.091(4) Å and α=110.59(1), β=102.96(2), γ=105.50(1)°, R=0.0539 and wR=0.0464 from 3441 unique observed reflections and 151 parameters. The structure of the title compound is built from sheets of uranium polyhedra closely related to that in β-U₃O₈. Within the sheets [(UO₂)(OH)O₄] pentagonal bipyramids share equatorial edges to form chains, which are cross-linked by [(UO₂)O₄] and [UO₄(H₂O)(OH)] square bipyramids and through hydroxyl groups shared between [(UO₂)(OH)O₄] pentagonal bipyramids. The sheets are pillared by sharing the apical oxygen atoms of the [(UO₂)(OH)O₄] pentagonal bipyramids with the oxygen atoms of [NiO₂(H₂O)₄] octahedral units. That builds a three-dimensional framework with water molecules pointing towards the channels. On heating [Ni(H₂O)₄]₃[U(OH,H₂O)(UO₂)₈O₁₂(OH)₃] decomposes into NiU₃O₁₀.     

Hydrothermal synthesis and structure of the first tin(II) squarate Sn2O(C4O4)(H2O)—comparison with Sn2[Sn2O2F4]

A tin(II) squarate Sn₂O(C₄O₄)(H₂O) was synthesized by hydrothermal technique. It crystallizes in the monoclinic system, space group C2/m (no. 12) with lattice parameters a=12.7380(9) Å, b=7.9000(3) Å, c=8.3490(5) Å, β=121.975(3)°, V=712.69(7) Å³, Z=4. The crystal structure determined with an R=0.042 factor, consists of [(Sn₄O₁₀)(H₂O)₂] units connected from one another in the [101] and [010] directions via squarate groups to form layers separated by Sn(II) lone pairs. This compound presents the same remarkable structural arrangement as observed in the tin-oxo-fluoride Sn₂[Sn₂O₂F₄] inorganic compound with Sn(II) lone pairs E(1) and E(2) concentrated in large rectangular-shape tunnels running along [001] direction.     

Synthesis of MnOOH nanorods by cluster growth route from [Mn12O12(RCOO)16(H2O)n] (R=CH3, C2H5). Rational conversion of MnOOH into Mn3O4 or MnO2 Nanorods

Single-crystalline nanorods of γ-MnOOH (manganite) phase with diameters of 120 nm and lengths of 1100 nm have been prepared using a new cluster growth route under low-temperature hydrothermal conditions starting from [Mn₁₂O₁₂(CH₃COO)₁₆(H₂O)₄]·2CH₃COOH·4H₂O or [Mn₁₂O₁₂(C₂H₅COO)₁₆(H₂O)₃]·4H₂O without any catalyst or template agents. The so-obtained nanorods were studied by X-ray diffraction (XRD), infrared (IR) spectroscopy, Raman spectroscopy and high resolution transmission electron microscopy (HRTEM). Their thermal conversion opens an access to Mn₃O₄ (hausmannite) and β-MnO₂ (pyrolusite) nanorods, respectively, under argon or air atmosphere. A coercive field of 12.4 kOe was obtained for the Mn₃O₄ nanorods.     

Preparation and crystal structure of [Bi3I(C4H8O3H2)2(C4H8O3H)5]2Bi8I30 containing the novel polynuclear [Bi8I30] anion

Preparation and crystal structure of the novel compound [Bi₃I(C₄H₈O₃H₂)₂(C₄H₈O₃H)₅]₂Bi₈I₃₀ are reported. The title compound is prepared by heating of BiI₃ and diethylene glycol at 413 K in a sealed quartz glass tube filled with argon. Deep red single crystals are grown and applied to perform X-ray powder diffraction and X-ray single-crystal diffraction measurements. The compound crystallizes triclinic with space group P-1: Z=2, a=13.217(1) Å, b=15.277(1) Å, c=22.498(1) Å, α=84.33(1), β=73.18(1), γ=67.48(1). [Bi₃I(C₄H₈O₃H₂)₂(C₄H₈O₃H)₅]₂Bi₈I₃₀ comprises the novel polynuclear [Bi₈I₃₀]⁶⁻ anion and [Bi₃I(C₄H₈O₃H₂)₂(C₄H₈O₃H)₅]³⁺ as the cation. Cation as well as the anion can be assumed to represent intermediates between solid BiI₃ and BiI₃ completely dissolved in diethylene glycol.     

[R-C7H16N2][V2Te2O10] and [S-C7H16N2][V2Te2O10]; new polar templated vanadium tellurite enantiomers

New polar vanadium tellurite enantiomers have been synthesized under mild hydrothermal conditions through the use of sodium metavanadate, sodium tellurite and enantiomerically pure sources of either R-3-aminioquinuclidine or S-3-aminioquinuclidine. [R-C₇H₁₆N₂][V₂Te₂O₁₀] and [S-C₇H₁₆N₂][V₂Te₂O₁₀] contain [V₂Te₂O₁₀]_n²ⁿ⁻ layers constructed from [(VO₂)₂O(TeO₄)₂] monomers. Steric effects associated with the hydrogen-bonding network between the [V₂Te₂O₁₀]_n²ⁿ⁻ layers and [C₇H₁₆N₂]²⁺ result in polar structures and crystallization in the space group P2₁ (no. 4). Electron localization functions were calculated to visualize the tellurite stereoactive lone pairs. Both iterative and non-iterative Hirshfeld techniques were evaluated as means to determine atomic partial charges, with iterative Hirshfeld charges more accurately representing charge distributions in the reported enantiomers. These charges were used to calculate both component and net dipole moments. [R-C₇H₁₆N₂][V₂Te₂O₁₀] and [S-C₇H₁₆N₂][V₂Te₂O₁₀] exhibit dipole moments of 17.37 and 16.62D, respectively. [R-C₇H₁₆N₂][V₂Te₂O₁₀] and [S-C₇H₁₆N₂][V₂Te₂O₁₀] both display type 1 phase-matching capabilities and exhibit second harmonic generation activities of ∼50×α-SiO₂.     

Hydrothermal synthesis and structures of the novel niobium phosphates [NbOF(PO4)](N2C5H7) and [(Nb0.9V1.1)O2(PO4)2(H2PO4)](N2C2H10)

Two new niobium phosphates were synthesized and their crystal structures determined from single-crystal X-ray data. [NbOF(PO₄)](N₂C₅H₇) (1) (monoclinic, space group P2₁/c, a=11.442(1), b=9.1983(7), c=9.1696(8) Å, β=109.94(1)°) has a layered structure and is the first example of a negatively charged NbOF(PO₄) layer analogous to the MO(H₂O)PO₄ (M=V, Nb) layers. The layer charge is compensated by interlayer 4-aminopyridnium cations that adopt an unusual arrangement as a consequence of H-bonding and π-π interactions. The interlayer aminopyridnium cations can be exchanged with alkylammonium ions which form bilayers inclined at ∼65° to the NbOF(PO₄) layer. [(Nb_0.9V_1.1)O₂(PO₄)₂(H₂PO₄)] (N₂C₂H₁₀) (2) (orthorhombic, space group Pbca, a=15.821(2),b=9.0295(9),c=18.301(2) Å) has a disordered three-dimensional structure based on NbO(PO₄) layers cross-linked by phosphate tetrahedra, and has a similar structure to the known vanadium analog [V₂O₂(PO₄)₂(H₂PO₄)] (N₂C₂H₁₀).     

Three-dimensional five-connected coordination polymer [M2(C3H2O4)2(H2O)2(μ2-hmt)]n with 46 topologies (M=Zn, Cu; hmt=hexamethylenetetramine)

Two novel three-dimensional five-connected coordination polymers [M₂(C₃H₂O₄)₂(H₂O)₂(μ₂-hmt)]_n with 4⁴6⁶ topologies (M=Zn, Cu; hmt=hexamethylenetetramine) were synthesized and characterized by elemental analysis, crystal structure, IR, thermal gravimetric analyses. Both [Zn₂(C₃H₂O₄)₂(H₂O)₂(μ₂-hmt)]_n and [Cu₂(C₃H₂O₄)₂(H₂O)₂(μ₂-hmt)]_n all crystallize in the orthorhombic system, space group Imm2, and with Z=2. Metal ions have all octahedral geometry coordinated by four oxygen atoms from three malonates, one oxygen atom from a water molecule and one nitrogen atom of hmt ligand. Each malonate binds a metal ion with its two oxygen atoms in a chelating mode and connects to adjacent two metal ions with another two oxygen atoms to form an infinite wavy layer. The layers are bridged by μ₂-hmt molecules to form a three-dimensional framework with channels. The magnetic susceptibility data show there is a weak antiferromagnetic exchange interaction in the complex [Cu₂(C₃H₂O₄)₂(H₂O)₂(μ₂-hmt)]_n.