Vinyl-addition polymerization of norbornene catalyzed by (pyrazol-1-ylmethyl)pyridine divalent iron, cobalt and nickel complexes

Complexes of 2-((3,5-dimethyl)-1H-pyrazol-1-ylmethyl)pyridine (L1), 2-((3,5-ditert-butyl-1H-pyrazol-1-yl)methyl)pyridine (L2), 2-((3,5-diphenyl)-1H-pyrazol-1-yl)methyl)pyridine (L3), 2-((3,5-bis(trifluoromethyl)-1H-pyrazol-1-ylmethyl)pyridine (L4) and 2,6-bis(3,5-dimethyl-1H-pyrazol-1-yl)methyl)pyridine (L5) with cobalt(II), iron(II) and nickel(II), Ni(L1)Cl₂ (1), Co(L1)Cl₂ (2), Fe(L1)Cl₂ (3), Ni(L2)Cl₂ (4), Ni(L3)Cl₂ (5), Co(L3)Cl₂ (6), Fe(L3)Cl₂ (7), Ni(L4)Cl₂ (8) and Ni(L5)Cl₂ (9), were used as catalyst precursors to produce vinyl-addition type norbornene polymers. Both the identity of the metal center and nature of ligand affected the polymerization behaviour of the resultant catalysts. Nickel catalysts were generally more active than the corresponding iron and cobalt analogues. The polynorbornene produced have high molecular weights (0.5-2.1 × 10⁶ g/mol) and narrow molecular weight distributions. Analyses of polymer microstructure using NMR and IR spectroscopy confirmed the polymers produced to be vinyl-addition polynorbornene.     

Styrene polymerization using nickel(II) complexes as catalysts

Styrene polymerization is investigated with neutral and cationic Ni(II) complexes, i.e. Ni(bipy)Me₂, 1, Ni(bipy)Br₂, 2, Ni(phen)Br₂, 3, or Ni(Me₂phen)Br₂, 4, Ni(acac)₂, 5, (bipy = 2,2′-bipyridine, phen = phenanthroline, Me₂phen = 2,9-dimethyl-1,10-phenanthroline, acac = acetylacetonate), activated by [NHMe₂Ph][B(C₆F₅)₄] or B(C₆F₅)₃ as cocatalysts, in the presence of AlMe₃. The influence on the polystyrene features and the reaction kinetics of the nickel complex and boron activator, the Al/Ni or B/Ni molar ratios as well as the monomer concentration are studied. Catalytic systems derived from 2, 3 or 5 and [NHMe₂Ph][B(C₆F₅)₄] at a Ni:B:Al ratio of 1:1:5 are the most efficient at room temperature.     

Synthesis,crystal structure,and antibacterial activity of mononuclear nickel(II) and cobalt(III) Schiff-base complexes

Four new mononuclear complexes, [Ni(L¹)(NCS)₂] (1), [Ni(L²)(NCS)₂] (2), [Co(L¹)(N₃)₂]ClO₄ (3), and [Co(L²)(N₃)₂]ClO₄ (4), where L¹ and L² are N,N′-bis[(pyridin-2-yl)methylidene]butane-1,4-diamine and N,N′-bis[(pyridin-2-yl)benzylidene]butane-1,4-diamine, respectively, have been prepared. The syntheses have been achieved by reaction of the respective metal perchlorate with the tetradentate Schiff bases, L¹ and L², in presence of thiocyanate (for 1 and 2) or azide (for 3 and 4). The complexes have been characterized by microanalytical, spectroscopic, single crystal X-ray diffraction and other physicochemical studies. Structural studies reveal that 1–4 are distorted octahedral geometries. The antibacterial activity of all the complexes and their constituent Schiff bases have been tested against Gram-positive and Gram-negative bacteria.     

The synthesis,structure, and ethylene polymerization of dimeric salicylaldiminato titanium complexes

A series of dimeric titanium complexes bearing salicylaldiminates, [4-R-6-^tBu-2-(CH=NⁿBu)C₆H₂OTiCl₂(µ-Cl)]₂ [R?=?H (1); R?=?^tBu (2); R?=?NO₂ (3)], have been synthesized in high yield (>90%) by the reaction of corresponding 4-R-6-^tBu-2-(CH=NⁿBu)C₆H₂OSiMe₃ with TiCl₄. The molecular structure of 2 has been confirmed by single-crystal X-ray diffraction analysis. When activated with methylaluminoxane, these complexes exhibit good catalytic activity for ethylene polymerization.     

Bridged bis-pyridinylimino dinickel(II) complexes: Syntheses, characterization, ethylene oligomerization and polymerization

A series of bridged bis(pyridinylimino) ligands were efficiently synthesized through the condensation reaction of 4,4′-methylene-bis(2,6-disubstituted aniline) with 2-pyridinecarboxaldehyde or 2-benzoylpyridine. They reacted with (DME)NiBr₂ to form dinuclear Ni(II) complexes. All resultant compounds were characterized by elemental analysis, IR spectra as well as the single-crystal X-ray diffraction to confirm the structures of ligands and complexes. Activated with methylaluminoxane (MAO), these nickel complexes showed considerably good activities for ethylene oligomerization and polymerization. Their catalytic activities and the properties of PEs obtained were depended on the arched environment of ligand and reaction conditions.     

Nickel (II) complexes bearing 2-ethylcarboxylate-6-iminopyridyl ligands: synthesis, structures and their catalytic behavior for ethylene oligomerization and polymerization

A series of nickel (II) complexes (L)NiCl₂ (7-9) and (L)NiBr₂ (10-12) were prepared by the reactions of the corresponding 2-carboxylate-6-iminopyridine ligands 1-6 with NiCl₂ · 6H₂O or (DME)NiBr₂ (DME = 1,2-dimethoxyethane), respectively. All the complexes were characterized by IR spectroscopy and elemental analysis. Solid-state structures of 7, 8, 10, 11 and 12 were determined by X-ray diffraction. In the cases of 7, 8 and 10, the ligands chelate with the nickel centers in tridentate fashion in which the carbonyl oxygen atoms coordinate with the metal centers, while the carbonyl oxygen atoms are free from coordinating with the nickel centers in 11 and 12. Upon activation with methylaluminoxane (MAO), these complexes are active for ethylene oligomerization (up to 7.97 × 10⁵ g mol⁻¹ (Ni) h⁻¹ for 11 with 2 equivalents of PPh₃ as auxiliary ligand) and/or polymerization (1.37 × 10⁴ g mol⁻¹ (Ni) h⁻¹ for 9). The ethylene oligomerization activities of 7-12 were significantly improved in the presence of PPh₃ as auxiliary ligands. The effects of the coordination environment and reaction conditions on the ethylene catalytic behaviors have been discussed.     

Novel nickel(II) and copper(II) complexes with phenoxy-imidazole ligands: Syntheses, crystal structures and norbornene addition polymerization

The novel nickel(II) (1) and copper(II) (2) complexes bearing 2′-(4′,6′-di-tert-butylhydroxy-phenyl)-1,4,5-triphenyl imidazole ligand have been synthesized and characterized. The molecular structure analyses of complexes 1 and 2 indicated that Ni(II) centre in 1 adopts a distorted tetrahedral coordination geometry with a dihedral angle of 85.2° between Ni(1)O(1)N(1) plane and Ni(1)O(1A)N(1A) plane, while the Cu(II) centre in 2 represents a distorted square planar coordination geometry with a cis-N₂O₂ arrangement of the donor atoms, the dihedral angle being 32° between Cu(1)O(1)N(1) plane and Cu(1)O(1A)N(1A) plane. After activation with methylaluminoxane (MAO), both Ni(II) and Cu(II) complexes can be used as catalysts for the addition polymerization of norbornene (NB). The polynorbornenes (PNBs) are produced with very high polymerization activity (10⁸ g PNB mol⁻¹ Ni h⁻¹) for Ni(II) complex and moderate catalytic activity (10⁵ g PNB mol⁻¹ Cu h⁻¹) for Cu(II) complex, respectively. The high molecular weight polynorbornenes (10⁶) are obtained for complexes 1 and 2. Moreover, the distinct effects of polymerization temperature and Al/M ratio on catalytic activities and molecular weights of polymers are discussed.     

Nickel(II) complexes with mono(imino)pyrrole ligands: preparation,structure and ethylene polymerization behavior

A series of unsymmetrical mono(imine)pyrroles (L1–L3) were synthesized by microwave irradiation from 2-acetylpyrrole and a series of dimethylanilines with two methyl groups at different positions on the aniline ring. A simplified synthetic method was initiated to prepare the corresponding nickel complexes NiL₂ (1–3) with direct condensation of mono(imine)pyrrole and nickel chloride. The compounds were determined using a suite of techniques (i.e. ¹H NMR, ¹³C NMR, IR, EA, MS). L1–L3 and 3 were further characterized by X-ray crystal diffraction. The structure of 3 showed that the ligand chelated to nickel with 2?:?1 M ratio, in spite of a 1?:?1 rate of charge. Application of 1–3 in ethylene polymerization indicated that mono(imino)pyrrole nickel complexes showed low activities. The polymerization reaction time and temperature, as well as the ligand structure, influenced the catalytic performance to some extent. Experimental data showed higher activity as –CH₃ on the aniline ring is closer to the imine group.     

Synthesis, characterization and butadiene polymerization studies of cobalt(II) complexes bearing bisiminopyridine ligand

A series of 2,6-bis(imino)pyridyl Co(II) complexes of the general formulas [2,6-(ArNCMe)₂C₅H₃N]CoCl₂ (Ar = -C₆H₅, 3a; 2-MeC₆H₄, 3b; 2-EtC₆H₄, 3c; 2-ⁱPrC₆H₄, 3d; 2,6-ⁱPr₂C₆H₃, 3e; 4-ⁱPrC₆H₄, 3f; 4-FC₆H₄, 3g; 4-CF₃C₆H₄, 3h; 2-FC₆H₄, 3i; 2,6-F₂C₆H₃, 3j; 2-Me-4-FC₆H₃, 3k and 2,6-Me₂-4-FC₆H₂, 3l) and [2,6-(ArNCH)₂C₅H₃N]CoCl₂ (Ar = -C₆H₅, 3m; 2-EtC₆H₄, 3n and 4-ⁱPrC₆H₄, 3o) have been synthesized and characterized. The structures of new complexes 3a, 3f-3h and 3m-3o are further confirmed by X-ray crystallography. All complexes adopt distorted trigonal bipyramidal configuration with the equatorial plane formed by the pyridyl nitrogen atoms and the two chlorine atoms. In the complexes 3m and 3o, three aromatic rings are essentially coplanar, which is in sharp contrast to the other complexes, where three rings are almost orthogonal to each other. With methylaluminoxane (MAO) as cocatalyst in toluene at room temperature, the complexes show moderate to high conversion (42-99%) in butadiene polymerization, producing polybutadiene with tunable cis-1,4 structure (77.5-97%) and controllable molecular weight and molecular weight distribution. The catalytic activity, selectivity as well as the molecular weight and molecular weight distribution of the resultant polymer are found to be dependent on the size and nature of substituents on iminoaryl rings and their positions located. By deliberately tuning the ligand structure, more efficient catalyst in terms of high activity and high selectivity can be obtained.     

Synthesis,structures, and urease inhibition of nickel(II), zinc(II), and cobalt(II) complexes with similar hydroxy-rich Schiff bases

Four new nickel(II), zinc(II), and cobalt(II) complexes, [Zn(L¹)₂]?·?H₂O (1), [Ni(L¹)₂]?·?H₂O (2), [Ni(L²)₂] (3), and [Co(L³)₂]?·?H₂O (4), derived from hydroxy-rich Schiff bases 2-{[1-(5-chloro-2-hydroxyphenyl)methylidene]amino}-2-methylpropane-1,3-diol (HL¹), 2-{[1-(2-hydroxy-3-methoxyphenyl)methylidene]amino}-2-ethylpropane-1,3-diol (HL²), and 2-{[1-(5-bromo-2-hydroxyphenyl)methylidene]amino}-2-methylpropane-1,3-diol (HL³) have been synthesized and characterized by elemental analyses, infrared spectroscopy, and single-crystal X-ray determination. Each metal in the complexes is six-coordinate in a distorted octahedral coordination. The Schiff bases coordinate to the metal atoms through the imino N, phenolate O, and one hydroxyl O. In the crystal structures of HL¹ and the complexes, molecules are linked through intermolecular O–H···O hydrogen bonds, forming 1-D chains. The urease inhibitory activities of the compounds were evaluated and molecular docking study of the compounds with the Helicobacter pylori urease was performed.     

Synthesis and crystal structure characterization of iron(II), cobalt(II) and nickel(II) complexes with 1,3-bis(2-pyridylmethylthio)propane

Three new mononuclear complexes of nitrogen–sulfur donor sets, formulated as [Fe^II(L)Cl₂] (1), [Co^II(L)Cl₂] (2) and [Ni^II(L)Cl₂] (3) where L = 1,3-bis(2-pyridylmethylthio)propane, were synthesized and isolated in their pure form. All the complexes were characterized by physicochemical and spectroscopic methods. The solid state structures of complexes 1 and 3 have been established by single crystal X-ray crystallography. The structural analysis evidences isomorphous crystals with the metal ion in a distorted octahedral geometry that comprises NSSN ligand donors with trans located pyridine rings and chlorides in cis positions. In dimethylformamide solution, the complexes were found to exhibit Fe^II/Fe^III, Co^II/Co^III and Ni^II/Ni^III quasi-reversible redox couples in cyclic voltammograms with E_1/2 values (versus Ag/AgCl at 298 K) of +0.295, +0.795 and +0.745 V for 1, 2 and 3, respectively.     

Synthesis, structure and ethylene polymerization behavior of titanium phosphinoamide complexes

(Phosphinoamide)(cyclopentadienyl)titanium(IV) complexes of the type Cp*TiCl₂(η²-Ph₂PNR) [Cp*=C₅Me₅; R = t-Bu (2a), R = n-Bu (2b), R = Ph (2c)] have been prepared by the reaction of Cp*TiCl₃ with the corresponding lithium phosphinoamides. The structure of Cp*TiCl₂(η²-Ph₂PN^tBu) (2a) and Cp*TiCl₂(η²-Ph₂PNPh) (2c) have been determined by X-ray crystallography. These complexes exhibited moderate catalytic activities for ethylene polymerization in the presence of modified methylaluminoxane (MMAO). Catalytic activity of up to 2.5 × 10⁶ g/(mol Ti h) was observed when activated by i-Bu₃Al/Ph₃CB(C₆F₅)₄.     

Supported dichlorobis(3-hydroxi-2-methyl-4-pyrone)Ti(IV) catalysts: Evaluation on ethylene polymerization

Dichlorobis(3-hydroxi-2-methyl-4-pyrone)Ti(IV) complex was grafted on different inorganic supports, namely different kinds of SiO₂, MAO-modified silica, MCM-41, Al₂O₃, ZrO₂ and MgO. The resulting supported catalysts were shown to be active in ethylene polymerization using methylaluminoxane (MAO) as cocatalyst, most of them being even more active that the homogeneous complex. The highest catalyst activities were observed for the Ti complex supported on SiO₂ 948 activated at 450 °C, MCM-41 and Al₂O₃.     

Extraction of cobalt (II) and nickel (II) by a solvent impregnated resin containing bis(2,4,4-trimethylpentyl)monothiophosphinic acid

In the present work, studies have been conducted on the equilibrium distribution of cobalt (II) and nickel (II) between aqueous hydrochloric solution and macromolecular resin impregnated with bis(2,4,4-trimethylpentyl)monothiophosphinic acid (Cyanex302, HL). Effects of extraction time, pH values, metal ion concentration, and temperature were investigated. Analysis of the results shows that the extraction of the two metal ions can be explained assuming the formation of metal complexes in the resin phase with a general composition ML ₂. An extraction reaction is proposed and the equilibrium constants of the complexes were determined. The Freundlich isotherm and thermodynamic quantities, i.e., ΔG, ΔH and ΔS were also obtained. Both of the extraction reactions of cobalt (II) and nickel (II) are endothermic ones. The efficiency of the resin in the separation of cobalt (II) and nickel (II) is provided according to the separation factors. Under the experimental conditions employed, pH₅₀ values for cobalt (II) and nickel (II) are 3.76, 5.01, respectively. The logarithmic value of separation factor was calculated as 2.50.     

Synthesis, structure and ethylene polymerization behavior of zirconium complexes with chelating ketoiminate ligands

Mixed ketoiminate/ketoimine/pentamethylcyclopentadienyl (Cp*) complex of zirconium, [(η⁵-Cp*){CH₃C(O)CHC(NHR)CH₃}{CH₃C(O)CHC(NR)CH₃}ZrCl₂] (R=4-CF₃Ph) (3) has been prepared in high yield by the reaction of one equivalent of 4-CF₃-phenyl-β-ketoimine (1a) and one equivalent of lithium 4-CF₃-phenyl-β-ketoiminate (2a) with one equivalent of Cp*ZrCl₃ in Et₂O. Bis(ketoiminate)zirconium dichloride complexes, 4 and 6, have been also prepared in high yield by the reaction of amine elimination of ketoimine ligands, respectively 1a and 1b, with Zr(NMe₂)₄ and followed by chlorination reaction with TMSCl. The X-ray crystallography reveals that the compound 3 is based on distorted octahedral geometry containing a ketoimine and a ketoiminate. The ketoiminate ligand coordinates to the zirconium as a bidentate ligand, leaving the metal center coordinatively unsaturated and thus leading to an additional binding of a ketoimine ligand to the metal to stabilize the complex 3. The zirconium complexes 3, 4 and 6 provide the moderate activity for the polymerization of ethylene in the presence of MMAO cocatalyst. Low molecular weight and high density polyethylene was obtained.     

Novel non-chelated cobalt(II) benzimidazole complex catalysts: Synthesis, crystal structures and cocatalyst effect in vinyl polymerization of norbornene

The novel non-chelated monodentate benzimidazole (BI) complexes CoCl₂(BI)₂ (1)-(3), where BI = 1-(2-methoxybenzyl)- 2-(2-methoxyphenyl)-1H-benzimidazole (1), BI = 2-(2,6-difluorophenyl)-1H-benzimidazole (2) and 2-methyl-1H-benzimidazole (3) were synthesized and characterized by single X-ray crystallography. Unexpectedly, in solid state these complexes show similar coordination behavior to their analogue nickel(II) benzimidazole complexes such as inter-molecular H-bonding pattern and presence of acetonitrile solvent molecules per unit of complex molecule. Moreover, among these cobalt catalysts 1-3, similar trend to that of nickel catalysts is observed for metal-to-nitrogen (M-X) coordination bond length and halogen-metal-halogen (X-M-X) bond angle. But unlike nickel(II) benzimidazole complexes, these catalysts show very low activity for vinyl polymerization of norbornene (NB) upon activation with methylaluminoxane (MAO); however, the activity abruptly increased in modified methylaluminoxane (MMAO). The presence of a small amount of toluene strongly hampered the activity, and the use of dry methylaluminoxane (dMAO) as a cocatalyst did not result in a high activity. The use of toluene-free solid modified methylaluminoxane (sMMAO) is found to be the best cocatalyst, where the highest activity of value 3.9 × 10⁷ g of PNB mol_Co⁻¹ h⁻¹ was achieved for 3/sMMAO at 30 °C.     

Characterization and crystal structures of copper(II), cobalt(II), and nickel(II) complexes with two kinds of piperidine carboxylic acids

Copper(II) complex with -piperidine-3-carboxylic acid ( -Hpipe-3):[Cu( -pipe-3)₂(H₂O)] and cobalt(II) and nickel(II) complexes with piperidine-4-carboxylic acid (Hpipe-4):[M(Hpipe-4)₂(H₂O)₄]Cl₂ (M: Co, Ni) have been prepared and characterized by means of IR and powder diffuse reflection spectra, thermal analysis, and magnetic susceptibility. The crystal structures of these complexes have been determined by X-ray diffraction. The crystal of [Cu( -pipe-3)₂(H₂O)] is orthorhombic with the space group Pbcn. The copper atom is in a square pyramidal geometry, ligated by two carboxylato oxygen atoms, two nitrogen atoms, and a water molecule. One molecule of this complex consists of either -piperidine-3-carboxylic acid or -piperidine-3-carboxylic acid. The crystals of [M(Hpipe-4)₂(H₂O)₄]Cl₂ are monoclinic with space group P2₁/n. In these complexes the metal atom is in an octahedral geometry ligated by two carboxylato oxygen atoms and four water molecules.     

Synthesis of anilinonaphthoquinone-based nickel complexes and their application for olefin polymerization

A series of anilinonaphthoquinone-based nickel complexes, Ni(C₁₀H₅O₂NAr)(Ph)(PPh₃) (Ar = C₆H₃-2,6-Me (1c); Ar = C₆H₂-2,4,6-Me (2c); Ar = C₆H₃-2,6-Et (3c)), were synthesized and the structures of 1c-3c were confirmed by single crystal X-ray analyses. The anilinonaphthoquinone-ligated nickel complexes activated with B(C₆F₅)₃ showed high activities for ethylene polymerization at 40 °C under atmospheric pressure of ethylene and gave polyethylene with long chain branches and short chain branches. The activity of these systems was decreased by lowering polymerization temperature accompanied by increase in molecular weight. The number of the chain branches was also decreased with lowering polymerization temperature and increasing the bulkiness of the ligand.     

Synthesis,structure and olefin polymerization catalysis of nickel(II) complexes bearing N,O-chelate ligands

Four β-ketoimine ligands (two series) were prepared through traditional condensation reactions of β-diketones with 2,6-substituted anilines. Reaction took place only at the cyclohexanone carbonyl rather than at the acetyl or benzoyl carbonyl, even if more than two equivalents of the amines were added. Consequently, four new moisture- and air-stable bis(β-ketoamino)nickel(II) complexes, Ni[2–CH₃C(O)C₆H₈(=NAr)]₂ (Ar?=?2, 6-iPr₂C₆H₃, (1); Ar?=?2, 6-Me₂C₆H₃, (2) and Ni[2–PhC(O)C₆H₈(=NAr)]₂ (Ar?=?2, 6-iPr₂C₆H₃, (3); Ar?=?2, 6-Me₂C₆H₃, (4) were obtained and characterized. The solid-state structures of complex 1, 2 and 3 have been determined by single-crystal X-ray diffraction. Additionally, these complexes can be applied as highly active catalyst precursors for vinyl polymerization of norbornene (NBE) after activation with methylaluminoxane (MAO).     

Vinyl polymerization of norbornene catalyzed by a series of bis(β-ketoiminato)nickel (II) complexes in the presence of methylaluminoxane

A series of nickel complexes with β-ketoiminato ligands based on pyrazolone derivative were synthesized and characterized, which are highly active catalyst precursors for norbornene polymerization under mild reaction conditions through a vinyl-type polymerization mechanism. The catalytic activity could be up to 3.38 × 10⁷ g polymer/mol Ni h. The molecular weight distributions of the polynorbornenes (M_w/M_n = 2.05-2.56) indicate the presence of a single active species in the polymerization process.