Ho3+/Yb3+共掺ZnO-Al2O3-GeO2-SiO2玻璃陶瓷的制备和上转换发光性质

综合ZnO-Al₂O₃-SiO₂系和锗酸盐玻璃陶瓷的优点,采用熔融-晶化法首次制备了Ho³⁺/Yb³⁺共掺以ZnAl₂O₄为主晶相的ZnO-Al₂O₃-GeO₂-SiO₂系玻璃陶瓷。因[GeO₄]四面体和[SiO₄]四面体都是玻璃网络形成体,讨论了GeO₂取代SiO₂对玻璃陶瓷样品硬度及发光性能的影响,最终确定GeO₂的取代量为10.55%（w/w）时,玻璃陶瓷综合性能最佳。在980 nm泵浦光的激发下,发现强的绿色（546 nm）和弱的红色（650 nm）上转换发光,并研究了不同Ho³⁺/Yb³⁺掺杂比对样品上转换发光的影响,最终结果表明当Ho³⁺/Yb³⁺掺杂比为1：11（n/n）时样品荧光强度最强,在绿色上转换发光材料方面具有潜在的应用。     

钙钛矿结构荧光材料MZrO3:Eu3+,A (M=Ca2+, Ba2+; A=Li+, Na+, K+)的制备及其发光性质

Calcium and barium zirconate powders based upon CaZrO₃:Eu³⁺,A and BaZrO₃:Eu³⁺,A (A=Li⁺, Na⁺, K⁺) were prepared by combustion synthesis method and heating to ~1000℃ to improve crystallinity.The structure and morphology of materials were examined by X-ray diffraction (XRD) and scanningelectron microscopy (SEM). XRD results showed that CaZrO₃:Eu³⁺,A and BaZrO₃:Eu³⁺,A (A=Li⁺, Na⁺, K⁺) perovskites possessed orthorhombic and cubic structures, respectively. The morphologies of all powderswere very similar consisting of small, coagulated, cubical particles with narrow size distributions andsmooth and regular surfaces. The characteristic luminescences of Eu³⁺ ions in CaZrO₃:Eu³⁺,A (A=Li⁺, Na⁺, K⁺) lattices were present with strong emissions at 614 and 625 nm for ⁵D₀→⁷F₂ transitions with other weakeremissions observed at 575, 592, 655, and 701 nm corresponding to ⁵D₀→⁷F_n transitions (where n=0, 1, 3, 4 respectively). In BaZrO₃:Eu³⁺ both the ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transitions at 595 and 613 nm were strong.Photoluminescence intensities of CaZrO₃:Eu³⁺ samples were higher than those of BaZrO₃:Eu³⁺ lattices. Thisremarkable increase of photoluminescence intensity (corresponding to ⁵D₀→⁷F_n transitions) was observedin CaZrO₃:Eu³⁺ and BaZrO₃:Eu³⁺ if co-doped with Li⁺ ions. An additional broad band composed of manypeaks between 440 to 575 nm was observed in BaZrO₃:Eu³⁺,,A samples. The intensity of this band wasgreatest in Li⁺ co-doped samples and lowest for K⁺ doped samples.     

Synthesis and characterization of some novel cadmium(II) complexes with 3-hydroxypicolinic acid (3-OHpicH): Crystal and molecular structures of [CdI(3-OHpic)(3-OHpicH)(H2O)]2, [Cd(3-OHpic)2(H2O)2] and [Cd(3-OHpic)2]n

Cadmium(II) complexes of 3-hydroxypicolinic acid, namely [CdI(3-OHpic)(3-OHpicH)(H₂O)]₂ (1), [Cd(3-OHpic)₂(H₂O)₂] (2) and [Cd(3-OHpic)₂]_n (3) were prepared and characterized by spectroscopic methods (IR, NMR) and their molecular and crystal structures were determined by X-ray crystal structure analysis. Complexes 1 and 2 were prepared in similar reaction conditions using different cadmium(II) salts: cadmium(II) iodide and cadmium(II) acetate dihydrate, respectively, while 3 was prepared by recrystallization of 2 from N,N-dimethylformamide solution. Various coordination modes of 3-OHpicH in 1–3 were established in the solid state: bidentate N,O-chelated mode in 1 and 2, monodentate mode through the carboxylate O atom from zwitterionic ligand in 1 and bidentate N,O-chelated and bridging mode in 3. In the DMF solution of all prepared complexes, only monodentate mode of 3-OHpicH binding to cadmium(II) through the carboxylate O atom was established by ¹H, ¹³C, ¹⁵N and ¹¹³Cd NMR spectroscopy.     

Enhanced ultraviolet up-conversion emissions of Tm/Yb codoped YF3 nanocrystals

Tm³⁺/Yb³⁺ codoped rod-like YF₃ nanocrystals were synthesized through a facile hydrothermal method. After annealing in an argon atmosphere, the nanocrystals emitted bright blue and intense ultraviolet (UV) light under a 980-nm continuous wave diode laser excitation. Up-conversion emissions centered at ∼291 nm (¹I₆ → ³H₆), ∼347 nm (¹I₆ → ³F₄), ∼362 nm (¹D₂ → ³H₆), ∼452 nm (¹D₂ → ³F₄), ∼476 nm (¹G₄ → ³H₆), ∼642 nm (¹G₄ → ³F₄), and ∼805 nm (³H₄ → ³H₆) were recorded using a fluorescence spectrophotometer. Especially, enhanced UV emissions were studied by changing Yb³⁺/Tm³⁺ doping concentrations, the annealing temperatures, and the excitation power densities. A possible mechanism, energy transfer-cross relaxation-energy transfer (ET-CR-ET), was proposed based on a simple rate-equation model to elucidate the process of the enhanced UV emissions.     

CaWO4:xEu3+,ySm3+,zLi+红色荧光粉的制备及光学性能

采用微波固相法制备了CaWO₄：xEu³⁺,ySm³⁺,zLi⁺红色荧光粉。测量样品的XRD图、激发谱、发射谱及发光衰减曲线,研究并分析了Eu³⁺、Sm³⁺、Li⁺的掺杂浓度,对样品微结构、光致发光特性、能量传递及能级寿命的影响。结果表明,Eu³⁺、Sm³⁺、Li⁺掺杂并未引起合成粉体改变晶相,仍为CaWO₄单一四方晶系结构。Eu³⁺、Sm³⁺共掺样品中,Sm³⁺掺杂为3%时,Sm³⁺对Eu³⁺的能量传递最有效。Li⁺掺杂起到了助熔剂和敏化剂的作用,使样品发光更强。在394 nm激发下,与CaWO₄：3%Eu³⁺样品比较,3%Eu³⁺、3%Sm³⁺共掺CaWO₄及3%Eu³⁺、3%Sm³⁺、1%Li⁺共掺CaWO₄样品的发光分别增强2倍及2.4倍。同一激发波长下,单掺Eu³⁺样品寿命最短,Sm³⁺、Eu³⁺共掺样品随Sm³⁺浓度增加,寿命先减小后增加,且掺杂了Li⁺的样品比不掺Li⁺的样品⁵D₀能级寿命有所增加。     

New results in the ammonolysis of hexafluoro-cyclo-triphosphazene: Crystal structure of P3N3F5–NH–P3N3F4NH2

The reaction of hexafluoro-cyclo-triphosphazene P₃N₃F₆ with ammonia in acetonitrile has been studied. New compounds, (2-imino-2,4,4,6,6-pentafluoro-2λ⁵,4λ⁵,6λ⁵-cyclo-triphosphaza-1,3,5-trienyl)-2-amino-4,4,6,6-tetrafluoro-2λ⁵,4λ⁵,6λ⁵-cyclo-triphosphaza-1,3,5-triene, P₃N₃F₅–NH–P₃N₃F₄NH₂ (2) and cis and trans isomers of non-gem-2,4-diamino-2,4,6,6-tetrafluoro-2λ⁵,4λ⁵,6λ⁵-cyclo-triphosphaza-1,3,5-triene, P₃N₃F₄(NH₂)₂ (4, 5)_, were detected by GC/MS, and ³¹P NMR spectroscopy in reaction mixtures. X-ray diffraction analysis of P₃N₃F₅–NH–P₃N₃F₄NH₂ (2) revealed two conformational polymorphs, 2A and 2B, the latter being built up of two different conformers that were further denoted as 2B_a (the same as the single conformer in 2A) and 2B_b. The compound 2 was characterized by spectroscopic methods and its 2D potential energy surface (PES) was described by density functional theory computations depending on two dihedral angles. The calculated PES spans over 30 kJ/mol in energy including 8 local minima and all first and second order saddle points. The occurrence of the two experimentally observed conformers 2B_a and 2B_b seems to be governed by crystal packing effects.     

Ho3+/Yb3+共掺ZnO-Al2O3-GeO2-SiO2玻璃陶瓷的制备和上转换发光性质

综合ZnO-Al_2O_3-SiO_2系和锗酸盐玻璃陶瓷的优点,采用熔融-晶化法首次制备了Ho~(3+)/Yb~(3+)共掺以ZnAl_2O_4为主晶相的ZnO-Al_2O_3-GeO_2-SiO_2系玻璃陶瓷。因[GeO_4]四面体和[SiO_4]四面体都是玻璃网络形成体,讨论了GeO_2取代SiO_2对玻璃陶瓷样品硬度及发光性能的影响,最终确定GeO_2的取代量为10.55%(w/w)时,玻璃陶瓷综合性能最佳。在980 nm泵浦光的激发下,发现强的绿色(546 nm)和弱的红色(650 nm)上转换发光,并研究了不同Ho~(3+)/Yb~(3+)掺杂比对样品上转换发光的影响,最终结果表明当Ho~(3+)/Yb~(3+)掺杂比为1∶11(n/n)时样品荧光强度最强,在绿色上转换发光材料方面具有潜在的应用。     

Synthesis and characterization of three new fluorovanadate complexes: N(C2H5)4[VOF4], N(CH3)4[VOF3Cl], N(C4H9)4[VOF3Br] and theoretical calculations of VOF4, VOF3Cl and VOF3Br ions

The reaction of VOF₃ with (C₂H₅)₄NF, (CH₃)₄NCl and (C₄H₉)₄NBr salts in anhydrous CH₃CN produced new complexes with the anion general formula [VOF₃X]⁻ in that (X = F⁻, Cl⁻, Br⁻). These were characterized by elemental analysis, IR, UV/Visible and ¹⁹F NMR spectroscopy. The optimized geometries and frequencies of the stationary point are calculated at the B3LYP/6-311G level of theory. Theoretical results showed that the VX (X = F, Cl, Br) bond length values for the [VOF₃X]⁻ in compounds 1-3 are 1.8247, 2.4031 and 2.5595 Å, respectively. Also, the VF₅ bond length values in [VOF₃X]⁻ are 1.824, 1.812 and 1.802 Å, respectively. These results reveal that the bond order for VX bonds decrease from compounds 1 to 3, while for VF₅ bonds, the bond orders increase. It can be concluded that the decrease of VX bonds lengths and the increase of VF₅ bond lengths in compounds 1-3 result from the increase of the hyperconjugation from compounds 1 to 3. Harmonic vibrational frequencies and infrared intensities for VOF₄⁻, VOF₃Cl⁻ and VOF₃Br⁻ are studied by means of theoretical and experimental methods. The calculated frequencies are in reasonable agreement with the experiment values. These data can be used in models of phosphoryl transfer enzymes because vanadate can often bind to phosphoryl transfer enzymes to form a trigonal-bipyramidal structure at the active site.     

La7O6(BO3)(PO4)2:Eu3+/Tb3+荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La₇O₆（BO₃）（PO₄）₂：Eu³⁺材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为⁵D₀→⁷F₂特征能级跃迁,Eu³⁺的最优掺杂浓度为0.08,对应的CIE坐标为（0.610 2,0.382 3）;La₇O₆（BO₃）（PO₄）₂：Tb³⁺材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb³⁺的⁵D₄→⁷F₅能级跃迁,Tb³⁺离子的最优掺杂浓度为0.15,对应的CIE坐标为（0.317 7,0.535 2）。此外,对2种材料的变温光谱分析发现Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂荧光材料均具有良好的热稳定性。     

X-ray and multinuclear NMR study of the mixed aggregate [(Ph2P(O)N(CH2Ph)CH3) · LiOC6H2-2,6-{C(CH3)3}2-4-CH3) · C7H8]2: a model for the directed metalation of phosphinamides

The addition of LiBuⁿ to a toluene solution of Ph₂P(O)N(CH₂Ph)CH₃1 and 2,6-di-tert-butyl-4-methylphenol 5 leads to the formation of the mixed dimer [(Ph₂P(O)N(CH₂Ph)CH₃) · LiOC₆H₂-2,6-{C(CH₃)₃}₂-4-CH₃) · C₇H₈]₂6. The single crystal X-ray structure shows that two lithium aryloxide moieties dimerize giving rise to a Li₂O₂ core in which each lithium atom is additionally coordinated to a phosphinamide 1 ligand. The multinuclear magnetic resonance study (¹H, ⁷Li, ¹³C, ³¹P) indicates that the solid-state structure is preserved in toluene solution. Complex 6 may be considered as a model for the pre-complexation step preceding the metalation of phosphinamides by an organolithium base.     

Ce3+掺杂La2O3的17O固体核磁共振研究

本文用水热共沉淀法制备Ce³⁺掺杂La₂O₃的前驱体,随后在H₂/N₂气氛下用高温煅烧法合成了不同Ce³⁺浓度的掺杂La₂O₃。由于Ce³⁺的掺杂,¹⁷O固体核磁共振谱图中在698、650和558处出现了新的共振峰;随着Ce³⁺掺杂浓度的增加,这些峰的强度也随之增强。根据谱峰位置和强度,对谱图进行了归属:698、650处的共振峰应源自与Ce³⁺相连的四配位O(OCeLa₃),558处的信号则来自于与Ce³⁺相连的六配位O(OCeLa₅)。通过¹⁷O固体核磁共振能够直接观测与Ce³⁺直接相连的O显示该方法将可能用于研究稀土掺杂氧化物功能材料。     

Ce3+掺杂La2O3的17O固体核磁共振研究

本文用水热共沉淀法制备Ce³⁺掺杂La₂O₃的前驱体,随后在H₂/N₂气氛下用高温煅烧法合成了不同Ce³⁺浓度的掺杂La₂O₃。由于Ce³⁺的掺杂,¹⁷O固体核磁共振谱图中在698、650和558处出现了新的共振峰;随着Ce³⁺掺杂浓度的增加,这些峰的强度也随之增强。根据谱峰位置和强度,对谱图进行了归属：698、650处的共振峰应源自与Ce³⁺相连的四配位O(OCeLa₃),558处的信号则来自于与Ce³⁺相连的六配位O(OCeLa₅)。通过¹⁷O固体核磁共振能够直接观测与Ce³⁺直接相连的O显示该方法将可能用于研究稀土掺杂氧化物功能材料。     

Luminescent properties of the potassium zinc phosphates of composition K1−xTlxZn(PO3)3

Crystalline and glassy K_1−xTl_xZn(PO₃)₃ polyphosphates have been synthesized and characterized. UV–visible spectroscopy was systematically used in order to analyze the optical properties of Tl⁺ ions both in crystalline and glassy forms with the similar compositions. The investigated polyphosphates can be considered as a model system since the spectroscopic properties of Tl⁺ ions in the glasses could be deduced by comparison with those in crystals. From structural point of view, in the crystalline forms the thallium ions are six-fold coordinated in a dissymmetrical oxygenated sites. Three luminescences (α, A_X, A_T) have been then observed and were attributed to the isolated Tl⁺ ions. In the glassy forms, an additional luminescence (D) has been detected in the low-energy range and was assigned to the Tl⁺ pairs formation. The relationship between the Tl⁺ site symmetry and its optical properties is discussed in the context of the Fukuda's model.     

PO43-掺杂Bi2O2CO3/Bi0的制备及其可见光催化性能

构建氧空位以及附着金属单质Bi(Bi⁰)是增强半导体材料光吸收性能、促进半导体光生载流子分离的有效方法。通过简单的共沉淀法及氢气热还原成功制备了PO₄^3-掺杂Bi₂O₂CO₃附着Bi⁰(Bi-P-BOC)的可见光催化剂,并对其在可见光下催化降解氧氟沙星(OFX)的性能及机理进行了研究。材料表征结果表明BOC随着PO₄^3-的均匀掺杂,可见光吸收能力增强,表面缺陷增多,比表面积增大。而随着氢气热还原,BOC表面形成Bi⁰的同时也原位构建了大量的氧空位。可见光催化性能测试表明,Bi-P-BOC可以在180 min内降解约85%的OFX,降解速率为0.013 0 min^-1,是BOC降解速率的8倍。Bi-P-BOC光催化降解机理表明其具有更好的可见光吸收能力,Bi⁰以及氧空位的存在促进了光生载流子的分离,h⁺是其...     

PO43-掺杂Bi2O2CO3/Bi0的制备及其可见光催化性能

构建氧空位以及附着金属单质Bi(Bi⁰)是增强半导体材料光吸收性能、促进半导体光生载流子分离的有效方法。通过简单的共沉淀法及氢气热还原成功制备了PO₄^3-掺杂Bi₂O₂CO₃附着Bi⁰(Bi-P-BOC)的可见光催化剂,并对其在可见光下催化降解氧氟沙星(OFX)的性能及机理进行了研究。材料表征结果表明BOC随着PO₄^3-的均匀掺杂,可见光吸收能力增强,表面缺陷增多,比表面积增大。而随着氢气热还原,BOC表面形成 Bi⁰的同时也原位构建了大量的氧空位。可见光催化性能测试表明,Bi-P-BOC可以在180 min内降解约85%的OFX,降解速率为0.013 0 min^-1,是BOC降解速率的8倍。Bi-P-BOC光催化降解机理表明其具有更好的可见光吸收能力,Bi⁰以及氧空位的存在促进了光生载流子的分离,h+是其光催化降解过程中的主要的活性氧物种(ROS),此外,¹O₂和·O₂^-也对降解有一定贡献。     

两种3D微孔Zn-MOF对水溶液中Fe3+、Cr2O72-和丙酮分子的荧光传感(英文)

通过溶剂热法合成了2种三维微孔锌金属有机框架材料,其分子式为[Zn₃(DBA)(OH)(1,10-phen)₂]_n (1)和{[Zn₂(HDBA)(4,4′-bipy)_1.5]·H₂O}_n (2)(H₅DBA=3,5-二(2′,4′-对羧基苯基)苯甲酸;1,10-phen=1,10-菲咯啉;4,4′-bipy=4,4′-联吡啶)。结构分析表明,配合物1为三核锌基金属单元的三维微孔骨架,配合物2为双核锌基的微孔结构。与2相比,配合物1在水中具有较强的发光性能,可作为检测Fe³⁺、Cr₂O₇^2-和丙酮分子的发光传感器,具有较高的选择性和灵敏度。     

Hydrothermal synthesis and luminescent properties of Sb-doped Sr3(PO4)2

Sb³⁺-doped Sr₃(PO₄)₂ crystals has been synthesized using phosphoric acid, strontium hydroxide and antimony powder as the raw materials through a hydrothermal reaction method. The crystallinity and the microstructure were investigated using X-ray diffraction and scanning electron microscopy. The photoluminescent property was investigated using luminescent spectrometer. Phase pure Sr₃(PO₄)₂ crystal was obtained and it has a shape of hexagonal rod. It showed the emission and excitation peaks at 396, 250, and 215 nm, respectively, indicating that the emission is attributed to ³P₁-¹S₀ transition and the excitation is attributed to ¹S₀-³P₁ and ¹S₀-¹P₁ transition. It was also observed that the intensity of photoluminescence is thermally stable up to 673 K.     

IR and Raman spectra of two layered aluminium phosphates Co(en)3Al3P4O16 · 3H2O and [NH4]3[Co(NH3)6]3[Al2(PO4)4]2 · 2H2O

The FT IR and FT Raman spectra of Co(en)₃Al₃P₄O₁₆ · 3H₂O (compound I) and [NH₄]₃[Co(NH₃)₆]₃[Al₂(PO₄)₄]₂ · 2H₂O (compound II) are recorded and analysed based on the vibrations of Co(en)₃³⁺, Co(NH₃)₆³⁺, NH₄⁺, Al---O---P, PO₃, PO₂ and H₂O. The observed splitting of bands indicate that the site symmetry and correlation field effects are appreciable in both the compounds. In compound I, the overtone of CH₂ deformation Fermi resonates with its symmetric stretching vibration. The NH₄ ion in compound II is not free to rotate in the crystalline lattice. Hydrogen bonding of different groups is also discussed.     

Ca9Y(PO4)7:Ce3+,Tb3+纳米荧光粉的制备及发光性能

采用水热法制备出Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺纳米荧光粉,通过XRD、SEM和荧光光谱等对样品进行了分析,研究在Ca₉Y（PO₄）₇基质中引入Ce³⁺,Tb³⁺离子对发光性能的影响规律。研究发现因Tb³⁺离子自身能量交叉驰豫的存在,使得单掺Tb³⁺时,通过调节Tb³⁺离子的浓度可以实现对发光颜色的控制。同时研究了Ce³⁺-Tb³⁺之间的能量传递为电多极相互作用的偶极-四极机制,Ce³⁺-Tb³⁺之间最大的能量传递效率为55.6%。Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺的发光颜色可以通过激活离子之间的能量传递和共发射得到可控调节。SEM分析表明荧光粉颗粒尺寸在100 nm左右,分散性好。     

CaWO_4∶xEu~(3+),ySm~(3+),zLi~+红色荧光粉的制备及光学性能

采用微波固相法制备了CaWO_4∶xEu~(3+),ySm~(3+),zLi~+红色荧光粉。测量样品的XRD图、激发谱、发射谱及发光衰减曲线,研究并分析了Eu~(3+)、Sm~(3+)、Li~+的掺杂浓度,对样品微结构、光致发光特性、能量传递及能级寿命的影响。结果表明,Eu~(3+)、Sm~(3+)、Li~+掺杂并未引起合成粉体改变晶相,仍为CaWO_4单一四方晶系结构。Eu~(3+)、Sm~(3+)共掺样品中,Sm~(3+)掺杂为3%时,Sm~(3+)对Eu~(3+)的能量传递最有效。Li~+掺杂起到了助熔剂和敏化剂的作用,使样品发光更强。在394 nm激发下,与CaWO_4∶3%Eu~(3+)样品比较,3%Eu~(3+)、3%Sm~(3+)共掺CaWO_4及3%Eu~(3+)、3%Sm~(3+)、1%Li~+共掺CaWO_4样品的发光分别增强2倍及2.4倍。同一激发波长下,单掺Eu~(3+)样品寿命最短,Sm~(3+)、Eu~(3+)共掺样品随Sm~(3+)浓度增加,寿命先减小后增加,且掺杂了Li~+的样品比不掺Li~+的样品~5D_0能级寿命有所增加。