Alkali metal compounds of a gallium(I) carbene analogue {:Ga[N(Ar)C(Me)]2} (Ar = 2,6-Pr2C6H3)

A gallium dichloro complex (L⁻)Ga^IIICl₂ (1) with an α-diimine ligand [(2,6-ⁱPr₂C₆H₃)NC(Me)]₂ (L⁰ represents the neutral ligand, L⁻ is the radical-anionic form of the ligand, and L represents its dianion L²⁻) was used to synthesize a series of alkali metal complexes of an N-heterocyclic carbenes (NHCs)-like gallium(I) species. Reduction of the precursor 1 with three equivalents of Na, Li, K or KC₈, respectively, in THF gave the complexes [LGa^INa(THF)₃] (2), [LGa^ILi(THF)₃] (3), [LGa^I{μ₂-K(THF)₄}Ga^IL][K(THF)₆] (4) and [LGa^I(μ₂-K){μ₂-K(THF)₂}Ga^IL] (5). In these complexes, the original radical-anionic ligand was further reduced to the dianion, whereas the Ga^III ion was reduced to Ga^I to yield the NHCs analogue [:GaN₂C₂]⁻, which then coordinated to alkali metal ions to form the complexes 2-5. Single crystal X-ray diffraction analyses revealed that these complexes feature direct Ga-M bonds (M = Li, Na, and K), which have also been studied by DFT computations.     

Novel structures of cyclometallated complexes of palladium(II) derived from terdentate ligands. Crystal and molecular structure of [Pd{C6H4C(H)=NCH2CH2CH2NMe2}(X)] (X=Cl, Br, I)

Treatment of N-(2-chlorobenzylidene)-N,N-dimethyl-1,3-propanediamine (1) and N-(2-bromo-3,4-(MeO)₂-benzylidene)-N,N-dimethyl-1,3-propanediamine (20) with tris(dibenzylideneacetone)dipalladium(0) in toluene gave the mononuclear cyclometallated complexes [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(Cl)] (2) and [Pd{3,4-(MeO)₂C₆H₂C(H)=NCH₂CH₂CH₂NMe₂}(Br)] (21), respectively, via oxidative addition reaction with the ligand as a C,N,N terdentate ligand. Reaction of 2 with sodium bromide or iodide in an acetone–water mixture gave the cyclometallated analogues of 2, [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(Br)] (3) and [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(I)] (4), by halogen exchange. The X-ray crystal structures of 2, 3 and 4 were determined and discussed. Treatment of 2, 3, 4 and 21 with tertiary monophosphines in acetone gave the mononuclear cyclometallated complexes [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(L)(X)] (6: L=PPh₃, X=Cl; 7: L=PPh₃, X=Br; 8: L=PPh₃, X=I; 9: L=PMePh₂, X=Cl; 10: L=PMe₂Ph, X=Cl) and [Pd{3,4-(MeO)₂C₆H₂C(H)=NCH₂CH₂CH₂NMe₂}(L)(Br)] (22: L=PPh₃; 23: L=PMePh₂; 24: L=PMe₂Ph). A fluxional behaviour due to an uncoordinated CH₂CH₂CH₂NMe₂ could be determined by variable temperature NMR spectroscopy. Treatment of 2, 3 and 4 with silver trifluoromethanesulfonate followed by reaction with triphenylphosphine gave the mononuclear complex [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(PPh₃)][F₃CSO₃] (11) where the Pd–NMe₂ bond was retained. Reaction of 2, 3 and 4 with ditertiary diphosphines in a cyclometallated complex–diphosphine 2:1 molar ratio gave the binuclear complexes [{Pd[C₆H₄C(H)=NCH₂CH₂CH₂NMe₂](X)}₂(μ-L–L)][L–L=PPh₂(CH₂)₄PPh₂(dppb) (13, X=Cl; 14, X=Br; 15, X=I; L–L=PPh₂(CH₂)₅PPh₂(dpppe): 16, X=Cl; 17, X=Br; 18, X=I) with palladium–NMe₂ bond cleavage. Treatment of 2, 3 and 4 with ditertiary diphosphines, in a cyclometallated complex–diphosphine 2:1, molar ratio and AgSO₃CF₃ gave the binuclear cyclometallated complexes [{Pd[C₆H₄C(H)=NCH₂CH₂CH₂NMe₂]}₂(μ-L–L)][F₃CSO₃]₂ (11: L–L=PPh₂(CH₂)₄PPh₂(dppb), X=Cl; 12: L–L=PPh₂(CH₂)₅PPh₂ (dpppe), X=Cl). Reaction of 2 with the ditertiary diphosphine cis-dppe in a cyclometallated complex–diphosphine 1:1 molar ratio followed by treatment with sodium perchlorate gave the mononuclear cyclometallated complex [Pd{C₆H₄C(H)=NCH₂CH₂CH₂NMe₂}(cis-PPh₂CH=CHPPh₂–P,P)][ClO₄] (19).     

One-dimensional structures of zinc(II) and cobalt(II) coordination complexes [Zn(NCS)2(PPz)]n and [CoCl2(PPz)]n (PPz=piperazine)

The reaction of Zn(NO₃)₂·6H₂O with PPz hexahydrate (PPz=piperazine) and NH₄SCN in CH₃OH afforded the complex [Zn(NCS)₂(PPz)]_n (1). The reaction of CoCl₂·6H₂O with PPz in CH₃OH afforded the complex [CoCl₂(PPz)]_n (2). The PPz ligand in 1 is coordinated to the metal centers through both nitrogen atoms to form a 1-D zigzag-chain structure and the distorted tetrahedral coordination geometry at each zinc center is completed by a pair of N-bonded thiocyanate ligands. Compound 2 has an analogous 1-D zigzag-chain structure containing terminal chloro ligands. Important NCSH---N hydrogen-bonding interactions in compound 1 and N---HCl---M and C---HCl---M hydrogen-bonding interactions in compound 2 play a significant role in aligning the polymer strands in the crystalline solid.     

2-Arylnaphthoxazole-derived palladium(II) complexes as phosphine-free catalysts for Heck reactions

Four air- and moisture-stable new palladium(II) complexes 2a–2c and 4 have been synthesized from easily available 2-arylnaphthoxazole derivatives. The detailed structures of 2c and 4 have been determined by single-crystal X-ray analysis. The Pd–N, Pd–C bonds in palladacycle complexes 2a–2c and the Pd–N, Pd–O bonds in complex 4 form the basis for five- and six-membered chelate rings, respectively. These complexes were applied as efficient phosphine-free catalysts for Heck reactions with aryl bromides and ethyl acrylate. Typically, in the presence of two equivalent n-Bu₄NBr, using 0.01% of palladacycle complex 2c as catalyst and two equivalent of K₂CO₃ as base in DMF at 140 °C provided coupled products in moderate to high yields.     

Transition metal chemistry of phosphorus based ligands. Ruthenium(II) chemistry of bis(phosphino)amines, X2PN(R)PX2 (R=H or Ph, X=Ph; R=Ph, X2=O2C6H4)

Reactions of CpRuCl(PPh₃)₂ with bis(phosphino)amines, X₂PN(R)PX₂ (1 R=H, X=Ph; 2 R=X=Ph; 3 R=Ph, X₂=O₂C₆H₄) give neutral or cationic mononuclear complexes depending on the reaction conditions. Reaction of 1 with CpRuCl(PPh₃)₂ gives one neutral complex, [CpRu(Cl)(η²-Ph₂PN(H)PPh₂)] (4) and two cationic complexes, [CpRu(η²-Ph₂PN(H)PPh₂)(η¹-Ph₂PN(H)PPh₂)]Cl (5) and [CpRu(PPh₃)(η²-Ph₂PN(H)PPh₂)]Cl (6), whereas the reaction of 2 with CpRuCl(PPh₃)₂ leads only to the isolation of cationic complex, [CpRu(PPh₃)(η²-Ph₂PN(Ph)PPh₂)]Cl (7). The catechol derivative 3, in a similar reaction, affords an interesting mononuclear complex [CpRu(PPh₃){η¹-(C₆H₄O₂)PN(Ph)P(O₂H₄C₆)}₂]Cl (8) containing two monodentate bis(phosphino)amine ligands. The structural elucidation of the complexes was carried out by elemental analyses, IR and NMR spectroscopic data.     

Two New Octahedral Cd(II) Complexes [Cd(L)2] and {[Cd(LH)2(SCN)2]H2O} [L = C6H5C(OH)NN = C(CH3)C5H4N]: Synthesis and Structural Studies

Two new octahedral Cd(II) complexes [Cd(L)₂] (1) and {[Cd(LH)₂(SCN)₂]H₂O} (2) [where LH = C₁₄H₁₃N₃O] are synthesized using a tridentate hydrazone ligand (LH) and they are characterized by elemental analysis, IR spectra, NMR spectra, thermal studies and finally the structures have been determined by single crystal X-ray diffraction. Complex 1 crystallizes in monoclinic system, space group C2/c with a = 22.565(6) ?, b = 10.252(3) ?, c = 12.187(4) ?, β = 118.851(2)^∘, and Z = 4. Complex 2 also crystallizes in the monoclinic system, space group P2₁/c with a = 9.257(9)?, b = 17.809(2)?, c = 9.548(9)?, β = 107.439(4)^∘, and Z = 2. In 1 the ligand binds the Cd(II) ion in tridentate fashion, whereas in 2 it acts as a bidentate ligand.     

金属配合物[MBr{(Ph2PCH2CH2)2C6H3}],[M=Pd(Ⅱ)、Pt(Ⅱ)]的合成及晶体结构

合成了一个新的双膦配位体2,6-双(二苯基膦乙基)溴苯,通过Pd     

Synthesis and characterisation of two novel Rh(I) carbene complexes: Crystal structure of [Rh(acac)(CO)(L1)]

The [Rh(acac)(CO)(L)] (acac = acetylacetonato; L₁ = 1,3-bis-(2,6-diisopropylphenyl)imidazolinylidene and L₂ = 1,3-bis-(2,4,6-trimethylphenyl)imidazolinylidene) complexes were prepared by the action of the parent carbene on [Rh(acac)(CO)₂] in THF. The crystal structure characterisation of [Rh(acac)(CO)(L₁)] revealed a slightly distorted square planar geometry with the carbene ligand orientated almost perpendicular to the equatorial plane; an elongated trans Rh-O bond of 2.0806(18) Å reflecting the considerable trans-influence of the carbene ligand. By measuring the CO stretching frequencies in a range of [Rh(acac)(CO)(L)] complexes (L = CO, L₁, L₂, PPh₃, PⁿBu₃, P(O-2,4-^tBu₂-Ph)₃) the following electron donating ability series was established: L₁ ∼ L₂ ∼ PⁿBu₃ > PPh₃ > P(O-2,4-^tBu₂-Ph)₃ > CO; indicating the carbenes investigated in this study to have a similar electronic cis-influence as trialkyl phosphines. Both complexes do not display hydroformylation activity towards 1-hexene in the absence of added phosphine or phosphite ligands under the conditions investigated (P = 60; T = 85 °C). In the presence of a phosphine or phosphite ligand the resulting hydroformylation catalysis was identical to that observed for [Rh(acac)(CO)₂] and the corresponding ligand and subsequent high-pressure ³¹P NMR studies confirmed substitution of the carbene ligand under these conditions.     

Gallium tri-chloride derivatives of the sterically demanding pyridines 2,6-Ar2C6H3N (Ar = 2,4,6-Me3C6H2 or 2,4,6-Pr3C6H2)

The sterically demanding pyridines 2,6-Ar₂C₆H₃N [Ar = 2,4,6-Me₃C₆H₂ (1) or 2,4,6-Prⁱ₃C₆H₂ (2)] were prepared by a palladium catalysed Kumada C–C coupling reaction in high yield. Pyridine 1 reacted with one equivalent of GaCl₃ to afford the tetra-chloro gallate–pyridinium ion pair complex [GaCl₄]⁻[2,6-(2,4,6-Me₃C₆H₂)₂C₆H₃NH]⁺ (3). Contrastingly, pyridine 2 reacted with one equivalent of GaCl₃ to afford the anticipated donor-acceptor complex [GaCl₃{2,6-(2,4,6-Prⁱ₃C₆H₂)₂C₆H₃N}] (4). Complexes 1–4 have been characterised variously by single crystal X-ray diffraction, NMR, CHN, and mass spectrometry.     

Synthesis and spectral characterization of diorganodiaminosilanes [(ArNH)2SiPhMe] (Ar = 2,6-Pr2C6H3; 2,4,6-Me3C6H2) and lithium silylamide [(2,6-Et2C6H3NLi)(2,6-Et2C6H3NH)SiPh2]

Aminosilanes bearing bulky substituents on nitrogen centers, [(ArNH)₂SiPhMe] (Ar = 2,6-ⁱPr₂C₆H₃ (1), 2,4,6-Me₃C₆H₂ (2)) and half-sandwich lithium silylamide [(2,6-Et₂C₆H₃NLi)(2,6-Et₂C₆H₃NH)SiPh₂] (3) have been prepared and characterized by elemental analysis, IR, EI mass and NMR (¹H and ²⁹Si) spectroscopic studies. The solid state structures of 2 and 3 have been determined by single crystal X-ray diffraction studies. The molecule 2 has a C₁ symmetry due to the steric crowding, and the two N-H protons are approximately trans to each other. The amido nitrogen atoms in 2 show significant deviation from trigonal-planar geometry, and as a result, the observed Si-N bonds are marginally longer than those observed in aminosilanes with planar nitrogen atoms. The molecule 3 exists as discrete dimer with an inversion center. The Li ion in 3 forms intramolecular π-complex with the neighboring aryl (2,6-Et₂C₆H₃) group, to form a half-sandwich lithium silylamide.     

A highly active two six-membered phosphinite palladium PCP pincer complex [PdCl{C6H3(CH2OPPr)2-2,6}]

The diphosphinite 1,3-bis[(di-isopropylphosphinite)methyl]benzene (2) has been synthesized and its complexation in palladium chemistry investigated. Complex 3 represents the first example of a two six-member PCP pincer bis(phosphinite) species. A catalytic study of 3 in the Heck reaction, revealed this specie to have an outstanding activity in the olefination of iodo-, bromo- and chloro-benzenes. When compared with other PCP pincer complexes, the results show that both by increasing the ring size from five to six-membered and using phosphinite instead of phosphine groups lead to a more active catalyst.     

Synthesis, characterization and reactivity of the molybdenum(VI) complex [MoCl(NAr)2(CH2CMe2Ph)] (Ar=2,6-Pr2C6H3)

The compounds [MoCl(NAr)₂R] (R=CH₂CMe₂Ph (1) or CH₂CMe₃(2); Ar=2,6-Prⁱ₂C₆H₃) have been prepared from [MoCl₂(NAr)₂(dme)] (dme=1,2-dimethoxyethane) and one equivalent of the respective Grignard reagent RMgCl in diethyl ether. Similarly, the mixed-imido complex [MoCl₂(NAr)(NBu^t)(dme)] affords [MoCl(NAr)(NBu^t)(CH₂CMe₂Ph)] (3). Chloride substitution reactions of 1 with the appropriate lithium reagents afford the compounds [MoCp(NAr)₂(CH₂CMe₂Ph)] (4) (Cp=cyclopentadienyl), [MoInd(NAr)₂(CH₂CMe₂Ph)] (5) (Ind=Indenyl), [Mo(OBu^t)(NAr)₂(CH₂CMe ₂Ph)] (6), [MoMe(NAr)₂(CH₂CMe₂Ph)] (7), [MoMe(PMe₃)(NAr)₂(CH₂CMe ₂Ph)] (8) (formed in the presence of PMe₃) and [Mo(NHAr)(NAr)₂(CH₂CMe₂P h)](9). In the latter case, a by-product {[Mo(NAr)₂(CH₂CMe₂Ph) ]₂(μ-O)}(10) has also been isolated. The crystal structures of 1, 4, 5 and 10 have been determined. All possess distorted tetrahedral metal centres with cis near-linear arylimido ligands; in each case (except 5, for which the evidence is unclear) there are α-agostic interactions present.     

Bis(silylaminodiarylphosphoranylsilylmethyl-C,N)-tin(II) and -lead(II) complexes and their precursors; structures of H(LL′), H(LL″), Sn(LL″)2 and Pb(LL″)2; [LL′] = [CH(SiMe3)P(Ph)2NSiMe3],

We report a series (a)-(d) of tandem reactions involving the conversion of: (a) 2CH₂(SiMe₃)P(Ph)₂NSiMe₃ [2H(LL′)] (III) into successively [Li(LL′)]₂ (1a) and [Pb(LL′)₂] (3a); (b) 1a in turn into {[Li(LL″)]₂} (2) and [Pb(LL″)₂] (4); (c) 1a successively into Sn(LL′)Cl (5) and [Sn(LL″)₂] (6); (d) (1b) into (3b). Experimental details for the preparation and characterisation (including elemental analysis and multinuclear NMR spectra in C₆D₆ and EI mass spectra) of 1a, 2, 3a, 3b, 4, 6, III (a new synthesis) and IV are provided. The X-ray structures of crystalline 4, 6, III and IV are presented; those of 1a, 2 and 3a were previously published.     

Ate complexes of Ge(II) and Sn(II) with bidentate ligands [LiE(OCH2CH2NMe2)3]2 (E=Ge, Sn): synthesis and structure

The reaction of equimolar quantities of LiOCH₂CH₂NMe₂ and E¹⁴(OCH₂CH₂NMe₂)₂ (E¹⁴=Ge, Sn) in ether yielded new ate complexes [LiE¹⁴(OCH₂CH₂NMe₂)₃]₂ (E¹⁴=Ge (1), Sn (2)) with bidentate ligands. The compounds 1 and 2 are white crystalline substances which are highly soluble in THF and pyridine and very sensitive to the traces of oxygen and moisture. The structures of these compounds are studied by X-ray diffraction analysis. The ate complexes 1 and 2 are powerful nucleophiles and may be employed as ligands (neutral) in the coordination chemistry of the transition metals. The electronegative O-substituents at the divalent E¹⁴ atoms render them less oxidizable than alkyl- or aryl-substituted derivatives, and the bidentate ligands, owing to intramolecular donor-acceptor interactions, make them more thermodynamically stable compared to monodentate ligands.     

Darstellung und katalytische Eigenschaften von Rhodium(I)-Komplexsalzen des Typs [Rh(COD)o-Py(CH2)2P(Ph)(CH2)3ZR)]PF6 (Z = O,NH)

Preparation and Catalytic Properties of Rhodium(I) Complex Salts of the Type [Rh(COD)(o-Py(CH₂)₂ P(Ph)(CH₂)₃ZR)]PF₆ (Z = O, NH) . In dichloromethane solutions were reacted [Rh(COD)Cl]₂ (COD = cis,cis-1.5-cyclooctadiene) with each of the four new ligands of the type o-Py(CH₂)₂P(Ph)(CH₂)₃ZR in the presence of the halogen scavenger TIPF₆ at 0°C to complex salts [Rh(COD) (o-Py(CH₂)₂P(Ph)(CH₂)₃ZR]PF₆ (ZR = OC₂H₅, I ; OPh, II ; NHPh, III ; NHcyclo? C₆H₁₁, IV ). The Rh¹ complex cation in the obtained compounds I – IV coordinates besides the bedentate COD group the ligand donor atoms P und pyridinic N and the remaining donor atom Z is uncoodinated in an assumed square planar ligand geometry at the Rh central atom. In 1.4 dioxane solutions the complex catalysts I – IV polymerize at 25°C the substrate phenylacetylene (PA) to polyphenylacetylene (PPA): values of TON [h^?1] between 352 ( I ) and 876 ( IV ), and average molecular weights M_w (GPC measurements) between 238 000 ( I ) and 199 900 ( IV ). These given values exhibit a dependency on the ZR group in complexes I – IV . The microstructure of isolated PPA is cis-transoidal. It is formed stereospezific and, based on MNDO calculations, is thermodynamically favoured. For the purpose of comparison, from both the newly synthesized compounds of the type [Rh(COD)DBN- (or DBU)Cl] (DBN = 1.5-Diazabi-cyclo[4.3.0.]non-5-en, DBU = 1.8-Diazabicycl0[5.4.0]- undec-7-en) was obtained a larger value of TON with 1292 (or 1327) [h^?], but a lower value of M, with 166200 (or 131200). These catalysts including I –IV polymerize PA to PPA at a lower reaction temperature with improved selectivity and larger values of M_w as hitherto known catalyst systems.     

Supramolecular chemistry of half-sandwich organometallic building blocks based on RuCl2(p-cymene)Ph2PCH2Y

A new series of neutral organometallic building blocks based on piano-stool ruthenium(II) complexes, RuCl₂(p-cymene)Ph₂PCH₂Y [Y = -NHC₆H₄(2-CO₂H) (2a), -NHC₆H₄(3-CO₂H) (2b), -NHC₆H₃(3-CO₂H)(6-OCH₃) (2c), -NHC₆H₄(4-CO₂H) (2d), -NHC₆H₃(2-CO₂H)(4-OH) (2e), -NHC₆H₃(3-OH)(4-CO₂H) (2f), -NHC₆H₃(2-CO₂H)(5-CO₂H) (2g) and -OH (2h)], were synthesised in high yields (>88%) from {RuCl₂(p-cymene)}₂ and the appropriate phosphines 1a-1h. The new tertiary phosphine 1b was prepared by Mannich condensation of NH₂C₆H₄(3-CO₂H) with Ph₂PCH₂OH in MeOH. Solution NMR (³¹P{¹H}, ¹H), FT-IR and microanalytical data are in full agreement with the proposed structures. Single crystal X-ray studies confirm that, in each case, compounds 2a, 2b and 2d-2h have piano-stool arrangements with typical Ru-P, Ru-Cl and Ru-C_centroid bond lengths. From our crystallographic studies, factors that influence the supramolecular assemblies of these ruthenium(II) complexes include: (i) the type of functional group present, (ii) the geometric disposition of the -N(H)CH₂PPh₂, -CO₂H and -OH groups around the central benzene scaffold, and (iii) the solvents used in the recrystallisations. Hence in isomers 2a and 2b, molecules are associated into head-to-tail dimer pairs through classical intermolecular O-H?O hydrogen bonding. This feature is also observed in isomer 2d but dimer pairs are further associated to give a 1-D chain through assisted intermolecular N-H?Cl hydrogen bonding. The additional 4-hydroxo group in 2e promotes a ladder arrangement via intermolecular O-H?O and O-H?Cl hydrogen bonding. In contrast the isomeric compound 2f does not show head-to-tail O-H?O hydrogen bonding but instead O-H?Cl and N-H?O intermolecular hydrogen bonding is observed. Depending on the choice of solvent (MeOH or DMSO), 2g forms extended networks based on chains (2g · DMSO · 1.5MeOH) or tapes (2g · 3MeOH). In 2h, a single intramolecular O-H?Cl hydrogen bond is observed for each independent molecule. The X-ray structure of one representative tertiary phosphine, 1f, has also been determined.