Preparation, structural characterisation and electrochemical properties of iron(0) and tungsten(0) carbonyl complexes with 1-(diphenylphosphanyl)-1′-vinylferrocene and 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene as P-monodentate ligands

A new organometallic phosphanylalkene, 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene (2) was prepared and—together with 1-(diphenylphosphanyl)-1′-vinylferrocene (1)—studied as a ligand in iron- and tungsten-carbonyl complexes. The following complexes featuring the mentioned phosphanylalkenes as P-monodentate donors were isolated and characterised by spectral methods: [Fe(CO)₄(L-κP)] (4, L = 1; 5, L = 2) and trans-[W(CO)₄(L-κP)₂] (6, L = 1; 7, L = 2). In addition, the solid-state structures of 4 and 6 have been determined by single-crystal X-ray diffraction and the electrochemical properties of compounds 1, 2, 4 and 6 were studied by cyclic voltammetry at platinum electrode.     

F NMR spectroscopy as useful tool for determining the structure in solution of coordination compounds of MF5 (M = Nb, Ta)

The salts [S(NMe₂)₃][MF₆] (M = Nb, 2a; M = Ta, 2b) and [S(NMe₂)₃][M₂F₁₁] (M = Nb, 2c; M = Ta, 2d) have been prepared by reacting MF₅ (M = Nb, 1a; M = Ta, 1b) with [S(NMe₂)₃][SiMe₃F₂] (TASF reagent) in the appropriate molar ratio. The solid state structure of 2b has been ascertained by X-ray diffraction. The 1:1 molar ratio reactions of 1a with a variety of organic compounds (L) give the neutral adducts NbF₅L [L = Me₂CO, 3a; L = MeCHO, 3b; L = Ph₂CO, 3c; L = tetrahydrofuran (thf), 3d; L = MeOH, 3e; L = EtOH, 3f; L = HOCH₂CH₂OMe, 3g; L = Ph₃PO, 3h; L = NCMe, 3i] in good yields. The complexes MF₅L [M = Nb, L = HCONMe₂, 3j; M = Nb, L = (NMe₂)₂CO, 3k; M = Ta, L = (NMe₂)₂CO, 3l; M = Nb, L = OC(Me)CHCMe₂, 3m] have been detected in solution in admixture with other unidentified products, upon 2:1 molar reaction of 1 with the appropriate reagent L. The ionic complexes [NbF₄(tht)₂][NbF₆], 4a, and [NbF₄(tht)₂][Nb₂F₁₁], 4b, have been obtained by combination of tetrahydrothiophene (tht) and 1a, in 1:1 and 2:3 molar ratios, respectively. The treatment of 1 with a two-fold excess of L leads to the species [MF₄L₄][MF₆] [M = Nb, L = HCONMe₂, 5a; M = Ta, L = HCONMe₂, 5b; M = Nb, L = thf, 5c; M = Ta, L = thf, 5d; M = Nb, L = OEt₂, 5e]. The new complexes have been fully characterised by NMR spectroscopy. Moreover, the revised ¹⁹F NMR features of the known compounds MF₅L [M = Ta, L = Me₂CO, 3n; M = Ta, L = Ph₂CO, 3o; M = Ta, L = MePhCO, 3p; M = Ta, L = thf, 3q; M = Nb, L = CH₃CO₂H, 3r; M = Nb, L = CH₂ClCO₂H, 3s; M = Ta, L = CH₂ClCO₂H, 3t], TaF₄(acac), TaF₄(Me-acac) and [TaF(Me-acac)₃][TaF₆] (Me-acac = methylacetylacetonato anion) are reported.     

Photophysical properties and computational investigations of tricarbonylrhenium(I)[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]L and tricarbonylrhenium(I)[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]L derivatives (X = N-CH3, O, or S; L = Cl, pyridine)

We report a combined experimental and computational study of new rhenium tricarbonyl complexes based on the bidentate heterocyclic N-N ligands 2-(4-methylpyridin-2-yl)benzo[d]-X-azole (X = N-CH₃, O, or S) and 2-(benzo[d]-X-azol-2-yl)-4-methylquinoline (X = N-CH₃, O, or S). Two sets of complexes are reported. Chloro complexes, described by the general formula Re(CO)₃[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]Cl (X = N-CH₃, 1; X = O, 2; X = S, 3) and Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]Cl (X = N-CH₃, 4; X = O, 5; X = S, 6) were synthesized heating at reflux Re(CO)₅Cl with the appropriate N-N ligand in toluene. The corresponding pyridine set {Re(CO)₃[2-(4-methylpyridin-2-yl)benzo-X-azole]py}PF₆ (X = N-CH₃, 7; X = O, 8; X = S, 9) and {Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]py}PF₆ (X = N-CH₃, 10; X = O, 11; X = S, 12) was synthesized by halide abstraction with silver nitrate of 1-6 followed by heating in pyridine and isolated as their hexafluorophosphate salts. All complexes have been fully characterized by IR, NMR, electrochemical techniques and luminescence. The crystal structures of 1 and 7 were obtained by X-ray diffraction. DFT and time-dependent (TD) DFT calculations were carried out for investigating the effect of the organic ligand on the optical properties and electronic structure of the reported complexes.     

Diiron-aminocarbyne complexes with amine or imine ligands: C-N coupling between imine and aminocarbyne ligands promoted by tolylacetylide addition to [Fe2{μ-CN(Me)R}(μ-CO)(CO)(NHCPh2)(Cp)2][SO3CF3]

A terminally coordinated CO ligand in the complexes [Fe₂{μ-CN(Me)R}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (R = Me, 1a; R = Xyl, 1b; Xyl = 2,6-Me₂C₆H₃), is readily displaced by primary and secondary amines (L), in the presence of Me₃NO, affording the complexes [Fe₂{μ-CN(Me)R}(μ-CO)(CO)(L)(Cp)₂][SO₃CF₃] (R = Me, L = NH₂Et, 4a; R = Xyl, L = NH₂Et, 4b; R = Me, L = NH₂Prⁱ, 5a; R = Xyl, L = NH₂Prⁱ, 5b; R = Xyl, L = NH₂C₆H₁₁, 6; R = Xyl, L = NH₂Ph, 7; R = Xyl, L = NH₃, 8; R = Me, L = NHMe₂, 9a; R = Xyl, L = NHMe₂, 9b; R = Xyl, = NH(CH₂)₅, 10). In the absence of Me₃NO, NH₂Et gives addition at the CO ligand of 1b, yielding [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(O)NHEt}(Cp)₂] (11). Carbonyl replacement is also observed in the reaction of 1a-b with pyridine and benzophenone imine, affording [Fe₂{μ-CN(Me)R}(μ-CO)(CO)(L)(Cp)₂][SO₃CF₃] (R = Me, L = Py, 12a; R = Xyl, L = Py, 12b; R = Me, L = HNCPh₂, 13a; R = Xyl, L = HNCPh₂, 13b). The imino complex 13b reacts with p-tolylacetylide leading to the formation of the μ-vinylidene-diaminocarbene compound [Fe₂{μ-η¹:η²- CC(Tol)C(Ph)₂N(H)CN(Me)(Xyl){(μ-CO)(CO)(Cp₂)] (15) which has been studied by X-ray diffraction.     

New synthesis and thermal studies of palladacycloalkanes and their precursors

A series of new palladacycloalkanes of formula cis-[PdL₂(CH₂)_n] (9. n = 6, L = PPh₃; 10. n = 6, L₂ = dppe; 11. n = 8, L = PPh₃; 12. n = 8, L₂ = dppe) have been prepared by two routes. In the first route, the precursor bis(1-alkenyl) complexes cis-[PdL₂((CH₂)_nCHCH₂)₂] (1. n = 2, L = PPh₃, 2. n = 2, L₂ = dppe, 3. n = 3, L = PPh₃, 4. n = 3, L₂ = dppe) were allowed to react with Grubb’s 2nd generation catalyst to give the palladacycloalkenes, cis-[PdL₂(CH₂)_nCHCH(CH₂)_n] (5. n = 2, L = PPh₃, 6. n = 2, L₂ = dppe, 7. n = 3, L = PPh₃, 8. n = 3, L₂ = dppe), which were then hydrogenated to the palladacycloalkanes, 9-12. In the second route, the di-Grignard reagents BrMg(CH₂)_nMgBr (n = 6, 8) were reacted with the palladium complex [PdCl₂(COD)] followed by immediate ligand displacement to form the respective palladacycloalkanes 10 and 12. The complexes obtained were characterized by a range of spectroscopic and analytical techniques. Thermal decomposition studies were carried out on the palladacycloalkanes 9-12 and the main organic products shown to be 1-alkenes and 2-alkenes.     

Self-assembly syntheses and crystal structures of triorganotin(IV) pyridinecarboxylate: 1D polymers and a 42-membered macrocycle

A series of new triorganotin(IV) pyridinecarboxylates with 6-hydroxynicotinic acid (6-OH-3-nicH), 5-hydroxynicotinic acid (5-OH-3-nicH) and 2-hydroxyisonicotinic acid (2-OH-4-isonicH) of the types: [R₃Sn (6-OH-3-nic)·L]_n (I) (R = Ph, L = Ph·EtOH, 1; R = Bn, L = H₂O·EtOH, 2; R = Me, L = 0, 3; R = n-Bu, L = 0, 4), [R₃Sn (5-OH-3-nic)]_n (II) (R = Ph, 5; R = Bn, 6; R = Me, 7; R = n-Bu, 8), [R₃Sn (2-OH-4-isonic·L)]_n (III) (R = Bn, 9, L = MeOH; R = Me, L = 0, 10; R = Ph, 11, L = 0.5EtOH) have been synthesized. All the complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopy analyses. Among them, except for complexes 5 and 6, all complexes were also characterized by X-ray crystallography diffraction analysis. Crystal structures show that complexes 1-10 adopt 1D infinite chain structures which are generated by the bidentate O, O or N, O and the five-coordinated tin centers. Significant O-H?O, and N-H?O intermolecular hydrogen bonds stabilize these structures. Complex 11 is a 42-membered macrocycle containing six tin atoms, and forms a 2D network by intermolecular N-H?O hydrogen.     

The (phosphino)tetraphenylborate ligand in ruthenium-arene chemistry

The synthesis of a series of anionic half-sandwich ruthenium-arene complexes [E][RuCl₂(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (E = Bu₄N⁺: R = Ph, 1a, ⁱPr, 1b or Cy, 1c; E = bis(triphenylphosphine)iminium or PNP⁺: R = Ph, 1a′, ⁱPr, 1b′ or Cy, 1c′) are reported. X-ray crystallographic studies of 1a′ and 1b′ confirmed the three-legged piano-stool coordination geometry. In solution, complexes 1a-c and 1a′-c′ are proposed to form monomer-dimer equilibria as a result of chloride ligand dissociation. Complexes 1a-c and 1a′-c′ also form the formally neutral zwitterionic complexes [RuCl(L)(η⁶-p-cymene){PR₂(p-Ph₃BC₆H₄)}] (L = pyridine: R = Ph, 2a, ⁱPr, 2b or Cy, 2c; L = MeCN: R = Ph, 3a, ⁱPr, 3b or Cy, 3c) via chloride ligand abstraction using AgNO₃ or MeOTf.     

Synthesis and characterization of organophosphine/phosphite stabilized silver(I) methanesulfonates: Crystal structures of [Ph3PAgO3SCH3] and [(Ph3P)2AgO3SCH3]

Six organophosphine/phosphite stabilized silver(I) methanesulfonates of type [L_nAgO₃SCH₃] (L = Ph₃P, n = 1, 2a; n = 2, 2b; n = 3, 2c; L = (EtO)₃P; n = 1, 2d; n = 2, 2e; n = 3, 2f) were synthesized by the reaction of silver methanesulfonates with triphenylphosphine or triethylphosphite in dichloromethane under nitrogen atmosphere. These complexes were obtained in high yields and characterized by elemental analysis, ¹H-, ¹³C{H} NMR, IR spectroscopy and thermogravimetric analysis (TGA), respectively. X-ray single crystal analysis reveals that complex 2a is a tetramer [Ph₃PAgO₃SCH₃]₄ and complex 2b is a monomer. The thermal stability of 2a has been studied by applying thermogravimetric analysis. It starts to decompose between 50 and 440 °C in a three-step process. The final residue (Ag) is about 20.50%.     

Synthesis and characterization of carboxy-functionalized diiron model complexes of [FeFe]-hydrogenases: Decarboxylation of Ph2PCH2COOH promoted by a diiron azadithiolate complex

Two carboxy-functionalized diiron complexes [{(μ-SCH₂)₂X}{Fe(CO)₃}{Fe(CO)₂L}] (X = NC₃H₇, L = Ph₂PCH₂CH₂COOH, 4; X = CH₂, L = Ph₂PCH₂COOH, 5) were prepared, as biomimetic models of the [FeFe] hydrogenase active site, from the CO-replacement of [{(μ-SCH₂)₂NC₃H₇}Fe₂(CO)₆] (1) and (μ-pdt)Fe₂(CO)₆ (2) by phosphine ligands in CH₃CN at 40 °C, respectively. In contrast, the reaction of 1 with Ph₂PCH₂COOH under the same condition afforded complex [{(μ-SCH₂)₂NC₃H₇}{Fe(CO)₃}{Fe(CO)₂(Ph₂PCH₃)}] (3) with a decarboxylated phosphine ligand. The molecular structures of complexes 3-5 were determined by X-ray crystallographic analyses, which show that they have similar frameworks with the phosphine ligand on the apical position. The interesting C-H···S contacts between the methylene hydrogen atoms of the PhCH₂COOH ligand and the μ-S atoms of the pdt-bridge are found in the crystal of 5. According to the experimental evidence, a plausible mechanism, via sequential phosphine coordination, N-protonation, and decarboxylation steps, is proposed for the formation of 3 and for explanation of the contrastive reactivities of the adt- (2-aza-1,3-propanedithiolato) and the pdt- (1,3-propanedithiolato) bridged diiron complexes toward decarboxylation of the Ph₂PCH₂COOH ligand.     

Ruthenium vinylidene and carbyne complexes containing a multifunctional tridentate ligand with a PNN donor set

The neutral, octahedral ruthenium vinylidene complexes mer,trans-[(PNN)Cl₂Ru(CCHR)] (PNN = N-(2-diphenylphosphinobenzylidene)-2-(2-pyridyl)ethylamine; R = Ph, 1a; R = ^tBu, 1b) are reported. An X-ray crystallographic study of 1a confirms the tridentate, meridional coordination mode of the PNN ligand. Compounds 1a and 1b undergo regioselective electrophilic addition with HBF₄ · Et₂O at C_β of the vinylidene ligand at low temperatures, and are cleanly and quantitatively converted to the ruthenium carbynes mer,trans-[(PNN)Cl₂Ru(CCH₂R)][BF₄] (R = Ph, 2a; R = ^tBu, 2b). Carbynes 2a and 2b are stable only at low temperatures (<−50 °C). Complex 1a undergoes ligand substitution with L to yield mer,trans-[(PNN)Cl₂Ru(L)] (L = MeCN, 3a; L = CO, 3b).     

Mono and dinuclear half-sandwich platinum group metal complexes bearing pyrazolyl-pyrimidine ligands: Syntheses and structural studies

Reactions of 0.5 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ (arene = η⁶-C₆H₆, η⁶-p-ⁱPrC₆H₄Me) and [(Cp∗)M(μ-Cl)Cl]₂ (M = Rh, Ir; Cp∗ = η⁵-C₅Me₅) with 4,6-disubstituted pyrazolyl-pyrimidine ligands (L) viz. 4,6-bis(pyrazolyl)pyrimidine (L1), 4,6-bis(3-methyl-pyrazolyl)pyrimidine (L2), 4,6-bis(3,5-dimethyl-pyrazolyl)pyrimidine (L3) lead to the formation of the cationic mononuclear complexes [(η⁶-C₆H₆)Ru(L)Cl]⁺ (L = L1, 1; L2, 2; L3, 3), [(η⁶-p-ⁱPrC₆H₄Me)Ru(L)Cl]⁺ (L = L1, 4; L2, 5; L3, 6), [(Cp∗)Rh(L)Cl]⁺ (L = L1, 7; L2, 8; L3, 9) and [(Cp∗)Ir(L)Cl]⁺ (L = L1, 10; L2, 11; L3, 12), while reactions with 1.0 eq. of the dinuclear complexes [(η⁶-arene)Ru(μ-Cl)Cl]₂ and [(Cp∗)M(μ-Cl)Cl]₂ give rise to the dicationic dinuclear complexes [{(η⁶-C₆H₆)RuCl}₂(L)]²⁺ (L = L1, 13; L2, 14; L3, 15), [{(η⁶-p-ⁱPrC₆H₄Me)RuCl}₂(L)]²⁺ (L = L1, 16; L2, 17; L3, 18), [{(Cp∗)RhCl}₂(L)]²⁺ (L = L1, 19; L2, 20; L3, 21) and [{(Cp∗)IrCl}₂(L)]²⁺ (L = L1 22; L2, 23; L3 24). The molecular structures of [3]PF₆, [6]PF₆, [7]PF₆ and [18](PF₆)₂ have been established by single crystal X-ray structure analysis.     

Helices of ruthenium complexes involving pyridyl-azine ligands: synthesis, spectral and structural aspects

New cationic complexes [Ru(η⁵-C₅H₅)(EPh₃)(L)]BF₄ [L = pyridine-2-carbaldehyde azine (paa); E = P, 1; E = As, 2; E = Sb, 3] and κ¹ bonded dppm complexes [Ru(η⁵-C₅H₅)(κ¹-dppm)(L)]BF₄ [L = paa 4; L = p-phenylene-bis(picoline)aldimine (pbp) 5] containing both group V donor and pyridyl-azine ligand are reported. The complexes were fully characterized by analytical and spectral studies. ³¹P NMR spectral studies suggested coordination of dppm in the complexes 4 and 5 in κ¹-manner, which was further, confirmed by structural studies on the representative complex 4. Weak interaction studies revealed that inter- and intramolecular C-H?X (X = O, F, Cl, π) and π-π interactions in the complexes 1 and 4 lead to helical structures.     

Rhenium and technetium tricarbonyl complexes anchored by 5-HT1A receptor-binding ligands containing P,O/N donor atom sets

The (2-methoxyphenyl)piperazine pharmacophore, a part of the WAY 100635 structure, has been functionalized with phosphinoarylbenzylamide or phosphinoarylbenzylamine chelator groups using propylene or hexylene alkyl chains as linkers (L2-L4). These heterofunctionalized phosphines bearing an arylpiperazine moiety have been used to stabilize rhenium tricarbonyl complexes of the type [Re(CO)₃Br(κ²-L)] (4, L = L2; 5, L = L3; 6, L = L4), which have been fully characterized, including by X-ray crystallographic analysis in the case of compounds 4 and 5. These monomeric complexes are six-coordinate, displaying a distorted octahedral coordination geometry with a facial arrangement of the carbonyl groups. The other three remaining positions are occupied by a bromide and by the bidentate heterofunctionalized phosphine, which coordinates through the phosphorus and the oxygen atom or through the phosphorus and the nitrogen atom in 4 and 5, respectively. The ^99mTc complexes (3a-6a) were also prepared and their characterization established by comparative HPLC, using the Re complexes as surrogates. The in vitro binding affinity for the 5HT_1A receptor subtype and the selectivity against the 5HT_2A receptors for the rhenium complexes were determined. Compound 3 is the only one which presents a reasonable affinity and selectively towards 5HT_1A (IC₅₀ = 20 nM) and 5HT_2A (IC₅₀ = 4680 nM) receptors, respectively. When the spacer length between the chelate unit and receptor binding domain increased and/or the amide group in the chelator was replaced by a secondary amine unacceptable affinity values for 5HT_1A receptors (IC₅₀ = 200-1100 nM) and lost of selectivity were observed.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

Nitrile ligands activation in dinuclear aminocarbyne complexes

The diiron complexes [Fe(Cp)(CO){μ-η²:η²-C[N(Me)(R)]NC(C₆H₃R′)CCH(Tol)}Fe(Cp)(CO)] (R = Xyl, R′ = H, 3a; R = Xyl, R′ = Br, 3b; R = Xyl, R′ = OMe, 3c; R = Xyl, R′ = CO₂Me, 3d; R = Xyl, R′ = CF₃, 3e; R = Me, R′ = H, 3f; R = Me, R′ = CF₃, 3g) are obtained in good yields from the reaction of [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(p-NCC₆H₄R′)(Cp)₂]⁺ (R = Xyl, R′ = H, 2a; R = Xyl, R′ = Br, 2b; R = Xyl, R′ = OMe, 2c; R = Xyl, R′ = CO₂Me, 2d; R = Xyl, R′ = CF₃, 2e; R = Me, R′ = H, 2f; R = Me, R′ = CF₃, 2g) with TolCCLi. The formation of 3 involves addition of the acetylide at the coordinated nitrile and C-N coupling with the bridging aminocarbyne together with orthometallation of the p-substituted aromatic ring and breaking of the Fe-Fe bond. Complexes 3a-e which contain the N(Me)(Xyl) group exist in solution as mixtures of the E-trans and Z-trans isomers, whereas the compounds 3f,g, which posses an exocyclic NMe₂ group, exist only in the Z-cis form. The crystal structures of Z-trans-3b, E-trans-3c, Z-trans-3e and Z-cis-3g have been determined by X-ray diffraction experiments.     

New group 4 half sandwich complexes containing triethanolamine ligand for polyethylene

(η⁵-C₅Me₅)M(TEA) (M = Ti, 1; Zr, 2; Hf, 3; TEA = triethanolateamine) was prepared by the reaction of (η⁵-C₅Me₅)MCl₃ with triethanolamine in the presence of NEt₃. The polyethylene catalytic efficiency in terms of activity decreases in the order 1/MAO > 2/MAO ? 3/MAO. In addition, the molecular weight (M_v) and melting temperature (T_m) of all the resulting polyethylene obtained by 2/MAO show the range of M_v = 91,200-356,200 and T_m = 137.0-141.9 °C, respectively; however, 1/MAO and 3/MAO gave polyethylenes with lower molecular weight (M_v = 6800-78,700) and lower melting temperature (T_m = 125.9-136.7 °C). Furthermore, 1/MAO showed significant decrease in the catalytic activity with increasing polymerization temperature though 2/MAO and 3/MAO have no dependence on the polymerization temperature.     

Self-assembly of di- and triorganotin(IV) complexes: Syntheses, characterization and crystal structures of 1D polymeric chain containing O,O-diethyl or O,O-diisopropyl phosphoric acid ligands

A series of organotin(IV) complexes with O,O-diethyl phosphoric acid (L¹H) and O,O-diisopropyl phosphoric acid (L²H) of the types: [R₃Sn · L]_n (L = L¹, R = Ph 1, R = PhCH₂2, R = Me 3, R = Bu 4; L = L², R = Ph 9, R = PhCH₂10, R = Me 11, R = Bu 12), [R₂Cl Sn · L]_n (L = L¹, R = Me 5, R = Ph 6, R = PhCH₂7, R = Bu 8; L = L², R = Me 13, R = Ph 14, R = PhCH₂15, R = Bu 16), have been synthesized. All complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ³¹P and ¹¹⁹Sn) spectroscopy analysis. Among them, complexes 1, 2, 3, 5, 8, 9 and 11 have been characterized by X-ray crystallography diffraction analysis. In the crystalline state, the complexes adopt infinite 1D infinite chain structures which are generated by the bidentate bridging phosphonate ligands and the five-coordinated tin centers.     

Mixed ligand complexes of AEE hexafluoroacetylacetonates with diglyme: Synthesis,crystal structure and thermal behavior

The novel mixed ligand complexes [Ca(hfa)₂(diglyme)(H₂O)] (I), [Sr(hfa)₂(diglyme)(H₂O)] (II) and [Ba(hfa)₂(diglyme)₂] (III) (Hhfa = 1,1,1,5,5,5-hexafluoropentane-2,4-dione, diglyme = 2,5,8-trioxanonane) were synthesized by the reactions of the alkaline earth element (AEE) carbonates in n-hexane with a mixture of Hhfa and diglyme, and they were characterized by elemental analysis, ¹H and ¹³C NMR, and FTIR spectroscopy. The crystal structures of I–III, consisting of mononuclear isolated molecules, have been determined. The thermal behavior and composition of the vapor phase have been studied for I–III by thermal analysis at low pressure and mass spectrometry using a Knudsen cell. The stability of the mixed ligand complexes [M(hfa)₂(diglyme)_n] to the removal of diglyme molecules under heating decreases in the row I > II ≈ III, and only I evaporates as the mixed ligand complex after water removal.     

Synthesis and characterization of organophosphine/phosphite stabilized silver(I) complexes bearing 2-acetyl-1,3-indandione ligand,crystal structure of [Ph3P·AgC11H7O3]

Six organophosphine/phosphite stabilized silver(I) complexes of 2-acetyl-1,3-indandione (2-AID) of type L_n·AgC₁₁H₇O₃ (L = PPh₃; n = 1, 2a; n = 2, 2b; L = P(OMe)₃; n = 1, 2c; n = 2, 2d; L = P(OEt)₃; n = 1, 2e; n = 2, 2f) have been prepared by reacting of [AgC₁₁H₇O₃], which could be obtained by reacting of 2-AID with AgNO₃, with triphenylphosphine, trimethylphosphite, or triethylphosphite in 1:1–2 M ratio. These complexes were obtained in high yields and characterized by elemental analysis, ¹H, ¹³C{H} NMR, IR spectroscopy, and thermal analysis (TG and DSC), respectively. The molecular structure of 2a has been determined by X-ray single crystal analysis in which the silver atom is in a distorted trigonal geometry.