Syntheses,characterizations and crystal structures of monomeric or macrocyclic compounds of di- or triorganotin (IV) moieties with 4,4′-thiodibenzenethiol

Six organotin compounds with 4,4′-thiodibenzenethiol (LH₂) of the type R_nSnL_4−nSnR_n (n = 3: R = Me 1, Ph 2, PhCH₂3, n = 2: R = Me 4, Ph 5, PhCH₂6) have been synthesized. All compounds were characterized by elemental analysis, IR and NMR (¹H, ¹³C, and ¹¹⁹Sn) spectra. The structures of compounds 1, 2, 4, 5 and 6 were also determined by X-ray diffraction analysis, which revealed that compounds 1 and 2 were monomeric structures, compounds 4, 5 and 6 were centrosymmetric dinuclear macrocyclic structures, and all the tin(IV) atoms are four-coordinated. Furthermore, supramolecular structures were also found in compounds 1, 2, 4, 5 and 6, which exhibit one-dimensional chains, two-dimensional networks or three-dimensional structures through intermolecular C–H?S weak hydrogen bonds (WHBs), non-bonded Sn?S interactions or C–H?π interactions.     

Substituted lithiumtrimethylsiloxysilanides LiSiRR′(OSiMe3) - Investigations of their synthesis, stability and reactivity

The reactions of the trimethylsiloxychlorosilanes (Me₃SiO)RR′SiCl (1a-h: R′ = Ph, 1a: R = H, 1b: R = Me, 1c: R = Et, 1d: R = ⁱPr, 1e: R = ^tBu, 1f: R = Ph, 1g: R = 2,4,6-Me₃C₆H₂ (Mes), 1h: R = 2,4,6-(Me₂CH)₃C₆H₂ (Tip); 1i: R = R′ = Mes) with lithium metal in tetrahydrofuran (THF) at −78 °C and in a mixture of THF/diethyl ether/n-pentane in a volume ratio 4:1:1 at −110 °C lead to mixtures of numerous compounds. Dependent on the substituents silyllithium derivatives (Me₃SiO)RR′SiLi (2b-i), Me₃SiO(RR′Si)₂Li (3a-g), Me₃SiRR′SiLi (4a-h), (LiO)RR′SiLi (12e, 12g-i), trisiloxanes (Me₃SiO)₂SiRR′ (5a-i) and trimethylsiloxydisilanes (6f^∗, 6h^∗, 6i^∗) are formed. All silyllithium compounds were trapped with Me₃SiCl or HMe₂SiCl resulting in the following products: (Me₃SiO)RR′SiSiMe₂R″ (6b-i: R″ = Me, 7c-i: R″ = H), Me₃SiO(RR′Si)₂SiMe₂R″ (8a-g: R″ = Me, 9a-g: R″ = H), Me₃SiRR′SiSiMe₂R″ (10a-h: R″ = Me, 11a-h: R″ = H) and (HMe₂SiO)RR′SiSiMe₂H (13e, 13g-i). The stability of trimethylsiloxysilyllithiums 2 depends on the substituents and on the temperature. (Me₃SiO)Mes₂SiLi (2i) is the most stable compound due to the high steric shielding of the silicon centre. The trimethylsiloxysilyllithiums 2a-g undergo partially self-condensation to afford the corresponding trimethylsiloxydisilanyllithiums Me₃SiO(RR′Si)₂Li (3a-g). (Me₃)Si-O bond cleavage was observed for 2e and 2g-i. The relatively stable trimethylsiloxysilyllithiums 2f, 2g and 2i react with n-butyllithium under nucleophilic butylation to give the n-butyl-substituted silyllithiums ⁿBuRR′SiLi (15g, 15f, 15i), which were trapped with Me₃SiCl. By reaction of 2g and 2i with 2,3-dimethylbuta-1,3-diene the corresponding 1,1-diarylsilacyclopentenes 17g and 17i are obtained.X-ray studies of 17g revealed a folded silacyclopentene ring with the silicon atom located 0.5 Å above the mean plane formed by the four carbon ring atoms.     

Platinum-catalyzed double silylations of alkynes with bis(dichlorosilyl)methanes

Bis(dichlorosilyl)methanes 1 undergo the two kind reactions of a double hydrosilylation and a dehydrogenative double silylation with alkynes 2 such as acetylene and activated phenyl-substituted acetylenes in the presence of Speier’s catalyst to give 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes 4 as cyclic products, respectively, depending upon the molecular structures of both bis(dichlorosilyl)methanes (1) and alkynes (2). Simple bis(dichlorosilyl)methane (1a) reacted with alkynes [R¹-CC-R²: R¹ = H, R² = H (2a), Ph (2b); R¹ = R² = Ph (2c)] at 80 °C to afford 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 as the double hydrosilylation products in fair to good yields (33-84%). Among these reactions, the reaction with 2c gave a trans-4,5-diphenyl-1,1,3,3-tetrachloro-1,3-disilacyclopentane 3ac in the highest yield (84%). When a variety of bis(dichlorosilyl)(silyl)methanes [(Me_nCl_3 − nSi)CH(SiHCl₂)₂: n = 0 (1b), 1 (1c), 2 (1d), 3 (1e)] were applied in the reaction with alkyne (2c) under the same reaction conditions. The double hydrosilylation products, 2-silyl-1,1,3,3-tetrachloro-1,3-disilacyclopentanes (3), were obtained in fair to excellent yields (38-98%). The yields of compound 3 deceased as follows: n = 1 > 2 > 3 > 0. The reaction of alkynes (2a-c) with 1c under the same conditions gave one of two type products of 1,1,3,3-tetrachloro-1,3-disilacyclopentanes 3 and 1,1,3,3-tetrachloro-1,3-disilacyclopent-4-enes (4): simple alkyne 2a and terminal 2b gave the latter products 4ca and 4cb in 91% and 57% yields, respectively, while internal alkyne 2c afforded the former cyclic products 3cc with trans form between two phenyl groups at the 3- and 4-carbon atoms in 98% yield, respectively. Among platinum compounds such as Speier’s catalyst, PtCl₂(PEt₃)₂, Pt(PPh₃)₂(C₂H₄), Pt(PPh₃)₄, Pt[ViMeSiO]₄, and Pt/C, Speier’s catalyst was the best catalyst for such silylation reactions.     

Synthesis and characterization of novel trans-3-benzyl/(diphenyl)methyl/naphthyl seleno substituted monocyclic β-lactams: X-ray structure of trans-1-(4′-methoxyphenyl)-3-(diphenyl)methylseleno-4-(4′-methoxyphenyl)azetidin-2-one

Several novel trans-3-benzyl/(diphenyl)methyl/naphthylseleno substituted monocyclic β-lactams (5-7) have been synthesized in high yields. The reaction scheme inolves [2 + 2] cycloaddition (Staudinger) reaction between suitably substituted imines 4(a-h) and ketenes (B) accessed from 2-benzyl/(diphenyl)methyl/naphthylselenoethanoic acids (1-3) using POCl₃ and triethylamine in refluxing toluene. Characterization of these newly synthesized seleno substituted β-lactams has been performed by various spectroscopic techniques viz. NMR (¹H, ¹³C and ⁷⁷Se), FTIR, mass spectrometry and elemental analysis. The molecular structure of trans-1-(4′-methoxyphenyl)-3-(diphenyl)methylseleno-4-(4′-methoxyphenyl)azetidin-2-one (6b) has also been established with the help of single crystal X-ray analysis.     

Synthesis, structure, and catalytic activity of titanium(IV) and zirconium(IV) amides with chiral biphenyldiamine-based ligands

A new series of titanium(IV) and zirconium(IV) amides have been prepared from the reaction between M(NMe₂)₄ (M = Ti, Zr) and C₂-symmetric ligands, (R)-2,2′-bis(pyridin-2-ylmethylamino)-6,6′-dimethyl-1,1′-biphenyl (2H₂), (R)-2,2′-bis(pyrrol-2-ylmethyleneamino)-6,6′-dimethyl-1,1′-biphenyl (3H₂), (R)-2,2′-bis(diphenylphosphinoylamino)-6,6′-dimethyl-1,1′-biphenyl (4H₂), (R)-2,2′-bis(methanesulphonylamino)-6,6′-dimethyl-1,1′-biphenyl (5H₂), (R)-2,2′-bis(p-toluenesulphonylamino)-6,6′-dimethyl-1,1′-biphenyl (6H₂), and C₁-symmetric ligands, (R)-2-(diphenylthiophosphoramino)-2′-(dimethylamino)-6,6′-dimethyl-1,1′-biphenyl (7H) and (R)-2-(pyridin-2-ylamino)-2′-(dimethylamino)-6,6′-dimethyl-1,1′-biphenyl (8H), which are derived from (R)-2,2′-diamino-6,6′-dimethyl-1,1′-biphenyl. Treatment of M(NMe₂)₄ with 1 equiv. of N₄-ligand, 2H₂ or 3H₂ gives, after recrystallization from an n-hexane solution, the chiral zirconium amides (2)Zr(NMe₂)₂ (9), (3)Zr(NMe₂)₂ (11), and titanium amide (3)Ti(NMe₂)₂ (10), respectively, in good yields. Reaction of Zr(NMe₂)₄ with 1 equiv of diphenylphosphoramide 4H₂ affords the chiral zirconium amide (4)Zr(NMe₂)₂ (12) in 85% yield. Under similar reaction conditions, treatment of Ti(NMe₂)₄ with 1 equiv. of sulphonylamide ligand, 5H₂ or 6H₂ gives, after recrystallization from a toluene solution, the chiral titanium amides (5)Ti(NMe₂)₂·0.5C₇H₈ (13·0.5C₇H₈) and (6)Ti(NMe₂)₂ (15), respectively, in good yields, while reaction of Zr(NMe₂)₄ with 1 equiv. of 5H₂ or 6H₂ gives the bis-ligated complexes, (5)₂Zr (14) and (6)₂Zr (16). Treatment of M(NMe₂)₄ with 2 equiv. of diphenylthiophosphoramide ligand 7H or N₃-ligand 8H gives, after recrystallization from a benzene solution, the bis-ligated chiral zirconium amides (7)₂Zr(NMe₂)₂ (17) and (8)₂Zr(NMe₂)₂ (19), and bis-ligated chiral titanium amide (8)₂Ti(NMe₂)₂ (18), respectively, in good yields. All new compounds have been characterized by various spectroscopic techniques, and elemental analyses. The solid-state structures of complexes 10, 12, 13, and 17-19 have further been confirmed by X-ray diffraction analyses. The zirconium amides are active catalysts for the asymmetric hydroamination/cyclization of aminoalkenes, affording cyclic amines in good to excellent yields with moderate ee values, while the titanium amides are not.     

The investigation of stereogenic properties of cyclotriphosphazene derivatives with two different chiral centres

Hexachlorocyclotriphosphazene N₃P₃Cl₆ and gem-disubstituted cyclotriphosphazene derivatives N₃P₃Cl₄X₂ (X = Ph, PhS, PhNH) were reacted with N-methyl-1,3-propanediamine and 3-amino-1-propanol to give compounds (9a-12a, 9b-12b) which exist as cis and trans geometric isomers and are two different racemic isomers, respectively to describe the stereogenic properties of a series of chiral cyclotriphosphazene compounds with two different centres of chirality. The geometric isomers were separated by column chromatography on silica gel and analysed by elemental analysis, mass spectrometry, and ³¹P and ¹H NMR spectroscopies, and also the geometric forms (cis or trans) of 9b, 10a, 11a, 11b and 12a have been determined by the X-ray crystallography. The enantiomers of all racemic compounds have been analysed by the changes in ³¹P NMR spectra on addition of a Chiral Solvating Agent (CSA), (R)-(+)-2,2,2-trifluoro-1-(9′-anthryl)ethanol. On the other hand, the racemic forms of chiral cyclotriphosphazene derivatives have been confirmed by contribution of chiral HPLC methods which have been developed for this study.     

Synthesis, coordination studies and redox properties of a novel ditertiary phosphine bearing two ferrocenyl groups

The new ferrocenyl substituted ditertiary phosphine {FcCH₂N(CH₂PPh₂)CH₂}₂ [Fc = (η⁵-C₅H₄)Fe(η⁵-C₅H₅)] (1) was prepared, in 72% yield, by Mannich based condensation of the known bis secondary amine {FcCH₂N(H)CH₂}₂ with 2 equiv. of Ph₂PCH₂OH in CH₃OH. Phosphine 1 readily coordinates to various transition-metal centres including Mo⁰, Ru^II, Rh^I, Pd^II, Pt^II and Au^I to afford the heterometallic complexes {RuCl₂(p-cym)}₂(1) (2), (AuCl)₂(1) (3), cis-PtCl₂(1) (4), cis-PdCl₂(1) (5), cis-Mo(CO)₄(1) (6), trans,trans-{Pd(CH₃)Cl(1)}₂ (7) and trans,trans-{Rh(CO)Cl(1)}₂ (8). In complexes 2, 3, 7 and 8 ligand 1 displays a P,P′-bridging mode whilst for 4-6 a P,P′-chelating mode is observed. All new compounds have been fully characterised by spectroscopic and analytical methods. Furthermore the structures of 1, 2 · 2CH₂Cl₂, 3 · CH₂Cl₂, 4 · CH₂Cl₂, 6 · 0.5CHCl₃ and 8 have been elucidated by single crystal X-ray crystallography. Electrochemical measurements have been undertaken, and their redox chemistry discussed, on both noncomplexed ligand 1 and representative compounds containing this new ditertiary phosphine.     

trans-Spanning ferrocene amidodiphosphine ligand: Synthesis, palladium complexes and catalytic use in Suzuki-Miyaura cross-coupling

Amide coupling between [2-(diphenylphosphino)phenyl]methylamine and 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) afforded a novel diphosphine-amide, 1-{N-[(2-(diphenylphosphino)phenyl)methyl]carbamoyl}-1′-(diphenylphosphino)ferrocene (1), which was subsequently studied as a ligand for palladium(II) complexes. Depending on the metal precursor, the following complexes were isolated: [PdCl₂(1-κ²P,P′)] (2), [PdCl(Me)(1-κ²P,P′)] (3), [(μ-1){PdCl₂(PBu₃)}₂] (4) and [(μ-1){PdCl(L^NC)}₂] (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹), featuring this ligand either as a trans-chelating or as a P,P′-bridging donor. The crystal structure of 2·1.25CH₂Cl₂ was established by X-ray crystallography, corroborating that 1 coordinates as a trans-spanning diphosphine without any significant distortion to the coordination sphere. Complex 2 together with a catalyst prepared in situ from 1 and palladium(II) acetate were tested in Suzuki-Miyaura reaction of aryl bromides with phenylboronic acid in dioxane.     

Effect of the rigidity and flexibility features of 2-pyridinyl or 8-quinolinyl based N-N chiral ligands on the stereochemical properties of [Pd(N-N)Cl2] complexes

The [Pd(N-N^∗)Cl₂] complexes have been obtained, as yellow solids, in almost quantitative yields; N-N^∗ indicate bidentate chiral ligands (S_a)-1, (S_a)-2, (S,S)-3, (R,R)-4, containing the rigid 2-pyridinyl or 8-quinolinyl building block skeleton and the C₂-symmetric chiral framework trans-2,5-dimethylpyrrolidinyl or (S)-(+)-2,2′-(2-azapropane-1,3-diyl)-1,1′-binaphthalene. The ligands pairs have the same C₂-symmetric chiral framework but different building block skeleton, beyond that for the basicity in the N-donor atoms, for rigidity and flexibility features. The N-N^∗ ligands act as chelating ligands leading a square planar geometry. The compounds [Pd(S,S-3)Cl₂] and [Pd(R,R-4)Cl₂] have been also characterised by X-ray diffraction. The rigidity and flexibility features of (S,S)-3 and (R,R)-4 ligands induce a different orientation of the trans-2,5-dimethylpyrrolidinyl moiety with respect to the pyridinyl and quinolinyl plane. This work shows that intrinsic rigidity and flexibility are not enough to define the ligand properties and to preview the effects that they induce on the reactivity of the metal complex.     

Synthesis and structure of penta-platinum σ-bonded derivatives of corannulene

The synthesis of a new class of Pt(II) complexes with corannulene by way of either oxidative addition or reductive coupling is reported and their crystal structures are investigated. The crystal structure for {trans-Pt(PEt₃)₂Cl}₄{cis-Pt(PEt₃)₂Cl}C₂₀H₅ (1) consists of two enantiomers in a unit cell and shows cis- and trans-configuration around Pt(II) due to bulky PEt₃ ligands. The pentanuclear Pt(II) complex, 1, readily reacts with 1-ethynyl-4-nitrobenzene to afford the penta-alkynyl substituted Pt(II) complex (2). Although there are still bulky PEt₃ ligands around the Pt atoms in 2, all five Pt(II) have trans-configurations. The bowl of corannulene in 2 is shallower than that of 1. Therefore, the bowl depth of corannulene plays a key role in the determination of molecular geometry of σ-bonded pentanuclear complexes bearing corannulene.     

Synthesis and structure of some cis-and trans-myrtanylstannanes

Enantiomerically pure cis- and trans-myrtanylstannanes cis-MyrSnPh₃ (1), trans-MyrSnPh₃ (2), cis-MyrSnPh₂Cl (3), trans-MyrSnPh₂Cl (4), cis-MyrSnPhCl₂ (5), trans-MyrSnPhCl₂ (6), cis-MyrSnCl₃ (7), trans-MyrSnCl₃ (8) were synthesized and fully characterized by ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy. The molecular structures of 1, 3, 6, 7, and [trans-MyrSn(OH)Cl₂ · H₂O]₂ (8a) a hydrolysis product of 8, were determined by X-ray crystallography.     

Synthesis, characterization, reactivity and computational studies of new rhenium(I) complexes with thiosemicarbazone ligands derived from 4-(methylthio)benzaldehyde

N-thioamide thiosemicarbazone derived from 4-(methylthio)benzaldehyde (R = H, HL¹; R = Me, HL² and R = Ph, HL³) have been prepared and their reaction with fac-[ReX(CO)₃(CH₃CN)₂] (X = Br, Cl) in methanol gave the adducts [ReX(CO)₃(HLⁿ)] (1a X = Cl, n = 1; 1a′ X = Br, n = 1; 1b X = Cl, n = 2; 1b′ X = Br, n = 2; 1c X = Cl, n = 3; 1c′ X = Br, n = 3) in good yield.All the compounds have been characterized by elemental analysis, mass spectrometry (ESI), IR and ¹H NMR spectroscopic methods. Moreover, the structures of HL², HL³, HL³·(CH₃)₂SO and 1b′·H₂O were also elucidated by X-ray diffraction. In 1b′, the rhenium atom is coordinated by the sulphur and the azomethine nitrogen atoms (κS,N³) forming a five-membered chelate ring, as well as three carbonyl and bromide ligands. The resulting coordination polyhedron can be described as a distorted octahedron.The structure of the dimers is based on rhenium(I) thiosemicarbazonates [Re₂(L¹)₂(CO)₆] (2a), [Re₂(L²)₂(CO)₆] (2b) and [Re₂(L³)₂(CO)₆] (2c) as determined by X-ray studies. Methods of synthesis were optimized to obtain amounts of these thiosemicarbazonate complexes. In these compounds the dimer structures are achieved by Re-S-Re bridges, where S is the thiolate sulphur from a κS,N³-bidentate thiosemicarbazonate ligand.Some single crystals isolated in the synthesis of 2b contain [Re(L⁴)(L²)(CO)₃] (3b) where L⁴ (=2-methylamine-5-(para-methylsulfanephenyl)-1,3,4-thiadiazole) is originated in a cyclization process of the thiosemicarbazone. Furthermore, the rhenium atom is coordinate by the sulphur and the thioamidic nitrogen of the thiosemicarbazonate (κS,N²) affording a four-membered chelate ring.     

Efficient, recoverable, copper-catalyzed aerobic oxidation of alcohols under FBS and thermomorphic mode

A series of fluorinated bipyridine derivatives, (4,4′-bis(R_fCH₂OCH₂)-2,2′-bpy) {R_f = n-C₈F₁₇ (1a), n-C₉F₁₉ (1b), n-C₁₀F₂₁ (1c), n-C₁₁F₂₃ (1d)} have been successfully synthesized using 4,4′-bis(bromomethylene)-2,2′-bpy and fluorinated alkoxides. Bpy 1a-d have been characterized by multi-nuclei (¹H, ¹⁹F, and ¹³C) NMR, GC/MS and FTIR. The Cu complexes 2a-d could be generated in situ by stirring ligands 1a-d with CuBr·Me₂S at room temperature, respectively. The 3-component systems 3c-d, CuBr·Me₂S/Bpy (1c-d)/2,2,6,6-Tetramethylpiperidine 1-oxyl (TEMPO), were successfully used to the aerobic oxidation of alcohols under the fluorous biphasic system (FBS). The resulting products from FBS could be easily recovered by two phase separation with high yields up to 8 runs (>90%). In order to avoid using the expensive fluorous solvents, systems 3a-d, CuBr·Me₂S/Bpy (1a-d)/TEMPO, were also successfully shown to catalyze the aerobic alcohol oxidation under the thermomorphic condition (in C₆H₅Cl), and the yields of oxidation of 4-nitrobenzyl alcohol were close to 100% even after 8 runs. In particular, 3a was most effective under the thermomorphic mode in the chemoselectivity of aerobic oxidation of aliphatic primary alcohols to aldehydes without any overoxidized acids.     

Synthesis of mono and doubly alkynyl substituted ferrocene and its crystal engineering using -C-H···O supramolecular synthon

Mono and doubly alkynyl substituted ferrocene complexes, [Fc(CH₂OCH₂CCH)_n], 2-3 (2: n = 1; 3: n = 2; Fc = ferrocene) have been synthesized from the room temperature reaction of mono and 1,1′-dihydroxymethyl ferrocene, Fc(CH₂OH)_n , 1a-b (1a: n = 1; 1b: n = 2) and propargyl bromide, in modest to good yields. These new ferrocene derivatives have been characterized by mass, IR, ¹H, ¹³C NMR spectroscopy, and molecular structures of compound 2 and 3 were unequivocally established by single crystal X-ray diffraction study. The crystal structure analysis revealed that 2 and 3 consist of infinite 1D zig-zag hydrogen bonded chains and 2D microporous hydrogen bonded network of molecules, linked by intermolecular C-H···O hydrogen bonding. The molecular structures of both 2 and 3 are further stabilized by C-H···π interactions.     

Dimethylthallium(III) complexes with picolinic acid and its hydroxyl derivatives

The reaction of dimethylthallium(III) hydroxide with picolinic acid (Hpic), 3-hydroxypicolinic acid (H₂3hpic) and 6-hydroxypicolinic acid (H₂6hpic) in an aqueous/methanol mixture afforded the complexes [TlMe₂(pic)] (1), [TlMe₂(H3hpic)] (2) and [TlMe₂(H6hpic)] (3), respectively. Complex 3′, [NaTlMe₂(6hpic)₂]_n, was obtained as a minor product from a methanolic solution of 3. Compounds 1–3 were characterized by IR and Raman spectroscopy and, in the cases of 1, 2 and 3′, by single-crystal X-ray diffraction. Complex 3′ is the first example of an H6hpic⁻ heterobimetallic compound to be isolated. The ¹H and ¹³C NMR spectra of 1 and 2 are also discussed.     

C-H and N-H activation by Pt(0) in N- and O-heteroaromatic compounds

The reactions of [Pt(PEt₃)₄] with various azoles afforded platinum(II) hydride complexes of the type trans-[PtH(1-azolyl)(PEt₃)₂], where azolyl=indolyl (1), imidazolyl (2), benzimidazolyl (3), pyrazolyl (4) and indazolyl (5), by oxidative insertion of the metal centre into the N-H bonds of the respective azoles. Pyrrole was much less reactive. Complexes trans-[PtH(R)(PEt₃)₂], where R=2-furyl (6), 2-benzoxazolyl (7) and 2-benzothiazolyl (8) were prepared via C-H bond activation. For benzothiazole, insertion into the C-S bond did not occur. Analogous C-H activation products with 1-methylpyrrole and dibenzofuran could not be isolated.     

Nitrile ligands activation in dinuclear aminocarbyne complexes

The diiron complexes [Fe(Cp)(CO){μ-η²:η²-C[N(Me)(R)]NC(C₆H₃R′)CCH(Tol)}Fe(Cp)(CO)] (R = Xyl, R′ = H, 3a; R = Xyl, R′ = Br, 3b; R = Xyl, R′ = OMe, 3c; R = Xyl, R′ = CO₂Me, 3d; R = Xyl, R′ = CF₃, 3e; R = Me, R′ = H, 3f; R = Me, R′ = CF₃, 3g) are obtained in good yields from the reaction of [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)(p-NCC₆H₄R′)(Cp)₂]⁺ (R = Xyl, R′ = H, 2a; R = Xyl, R′ = Br, 2b; R = Xyl, R′ = OMe, 2c; R = Xyl, R′ = CO₂Me, 2d; R = Xyl, R′ = CF₃, 2e; R = Me, R′ = H, 2f; R = Me, R′ = CF₃, 2g) with TolCCLi. The formation of 3 involves addition of the acetylide at the coordinated nitrile and C-N coupling with the bridging aminocarbyne together with orthometallation of the p-substituted aromatic ring and breaking of the Fe-Fe bond. Complexes 3a-e which contain the N(Me)(Xyl) group exist in solution as mixtures of the E-trans and Z-trans isomers, whereas the compounds 3f,g, which posses an exocyclic NMe₂ group, exist only in the Z-cis form. The crystal structures of Z-trans-3b, E-trans-3c, Z-trans-3e and Z-cis-3g have been determined by X-ray diffraction experiments.     

Synthesis, characterization, and ethylene polymerization behavior of [(RR′-admpzp)2Ti(OPr)2] complexes (RR′-admpzp = 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-olate)

[(RR′-admpzp)₂Ti(OPrⁱ)₂] complexes (2a-c), synthesized from reaction of Ti(OPrⁱ)₃Cl (0.5 equiv) with 1-dialkylamino-3-(3,5-dimethyl-pyrazol-1-yl)-propan-2-ol compounds in the presence of triethylamine (0.5 equiv), are pseudo-octahedral with each RR′-admpzp ligand κ²-O,N(pyrazolyl) coordinated to the titanium center. In solution, 2a-c adopt isomeric structures that are in dynamic equilibrium. At 23 °C, 2a-c/1000 MAO catalyst systems furnished high molecular weight polymers with narrow molecular weight distributions (M_w/M_n = 2.7-2.8). At 100 °C, 2a-c/MAO catalyst systems exhibited increased polymerization activity and 2c/1000 MAO system furnished high molecular weight polyethylene with a molecular weight distribution (M_w/M_n = 2.1) that is close to that found for single-site catalysts.     

Synthesis and structural characterization of 1′-(diphenylphosphino)ferrocene-1-carboxamide, its corresponding hydrazide, some heterocycles derived from the hydrazide and palladium(II) complexes with these functional phosphinoferrocene ligands

Two polar phosphinoferrocene ligands, 1′-(diphenylphosphino)ferrocene-1-carboxamide (1) and 1′-(diphenylphosphino)ferrocene-1-carbohydrazide (2), were synthesized in good yields from 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) via the reactive benzotriazole derivative, 1-[1′-(diphenylphosphino)ferrocene-1-carbonyl]-1H-1,2,3-benzotriazole (3). Alternatively, the hydrazide was prepared by the conventional reaction of methyl 1′-(diphenylphosphino)ferrocene-1-carboxylate with hydrazine hydrate, and was further converted via standard condensation reactions to three phosphinoferrocene heterocycles, viz 2-[1′-(diphenylphosphino)ferrocen-1-yl]-1,3,4-oxadiazole (4), 1-[1′-(diphenylphosphino)ferrocen-1-carbonyl]-3,5-dimethyl-1,2-pyrazole (5), and 1-[1′-(diphenylphosphino)ferrocene-1-carboxamido]-3,5-dimethylpyrrole (6). Compounds 1 and 2 react with [PdCl₂(cod)] (cod = η²:η²-cycloocta-1,5-diene) to afford the respective bis-phosphine complexes trans-[PdCl₂(L-κP)₂] (7, L = 1; 8, L = 2). The dimeric precursor [(L^NC)PdCl]₂ (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹) is cleaved with 1 to give the neutral phosphine complex [(L^NC)PdCl(1-κP)] (9), which is readily transformed into a ionic bis-chelate complex [(L^NC)PdCl(1-κ²O,P)][SbF₆] (10) upon removal of the chloride ligand with Ag[SbF₆]. Pyrazole 5 behaves similarly affording the related complexes [(L^NC)PdCl(5-κP)] (12) and [(L^NC)PdCl(5-κ²O,P)][SbF₆] (13), in which the ferrocene ligand coordinates as a simple phosphine and an O,P-chelate respectively, while oxadiazole 4 affords the phosphine complex [(L^NC)PdCl(4-κP)] (11) and a P,N-chelate [(L^NC)PdCl(4-κ²N³,P)][SbF₆] (14) under similar conditions. All compounds were characterized by elemental analysis and spectroscopic methods (multinuclear NMR, IR and MS). The solid-state structures of 1⋅½AcOEt, 2, 7⋅3CH₃CN, 8⋅2CHCl₃, 9⋅½CH₂Cl₂⋅0.375C₆H₁₄, 10, and 14 were determined by single-crystal X-ray crystallography.     

Synthesis, structures and electrochemical properties of ruthenium (II) complexes bearing bidentate 1,8-naphthyridine and terpyridine analogous (N,N,C)-tridentate ligands

1,8-Naphthyridine (napy) and terpyridine-analogous (N,N,C) tridentate ligands coordinated ruthenium (II) complexes, [RuL(napy-κ²N,N′) (dmso)](PF₆)₂ (1: L=L¹=N″-methyl-4′-methylthio-2,2′:6′,4″-terpyridinium, 2: L = L² = N″-methyl-4′-methylthio-2,2′:6′,3″-terpyridinium) were prepared and their chemical and electrochemical properties were characterized. The structure of complex 1 was determined by X-ray crystallographic study, showing that it has a distorted octahedral coordination style. The cyclic voltammogram of 1 in DMF exhibited two reversible ligand-localized redox couples. On the other hand, the CV of 2 shows two irreversible cathodic peaks, due to the Ru-C bond of 2 containing the carbenic character. The IR spectra of 1 in CO₂-saturated CH₃CN showed the formation of Ru-(η¹-CO₂) and Ru-CO complexes under the controlled potential electrolysis of the solution at −1.44 V (vs. Fc/Fc⁺). The electrochemical reduction of CO₂ catalyzed by 1 at −1.54 V (vs. Fc/Fc⁺) in DMF-0.1 M Me₄NBF₄ produced CO with a small amount of HCO₂H.