Syntheses and structures of non-symmetric guanidinato zirconium and hafnium complexes and their catalytic behavior for ethylene polymerization

Equivalent addition reactions of PhN(Li)SiMe₃ to nitriles, RCN (R = dimethylamido, 1-piperidino), generated non-symmetric guanidinato lithium [(Et₂O)LiN(SiMe₃)C(NMe₂)N(Ph)]₂ (1) or [(THF)LiN(SiMe₃)C(NMe₂)N(Ph)]₂ (2) and [(Et₂O)LiN(SiMe₃)C(N(CH₂)₅)N(Ph)]₂ (5) which further reacted with zirconium or hafnium tetrachloride to form Zr and Hf guanidinato complexes with the general formula [PhNC(R)NSiMe₃]₃MCl (R = dimethylamido, M = Zr (3), Hf (4); R = 1-piperidino, M = Zr (6), Hf (7)). Complexes 1-4, 6 and 7 were well characterized by ¹H, ¹³C NMR and microanalysis, the single crystal X-ray diffraction analysis data for complexes 1, 3, 4 and 7 were also provided. Furthermore, complexes 3, 4, 6 and 7 were found to be active for ethylene polymerization. The influences of cocatalyst, pressure, reaction temperature and Al/M ratio on activity were investigated.     

F NMR spectroscopy as useful tool for determining the structure in solution of coordination compounds of MF5 (M = Nb, Ta)

The salts [S(NMe₂)₃][MF₆] (M = Nb, 2a; M = Ta, 2b) and [S(NMe₂)₃][M₂F₁₁] (M = Nb, 2c; M = Ta, 2d) have been prepared by reacting MF₅ (M = Nb, 1a; M = Ta, 1b) with [S(NMe₂)₃][SiMe₃F₂] (TASF reagent) in the appropriate molar ratio. The solid state structure of 2b has been ascertained by X-ray diffraction. The 1:1 molar ratio reactions of 1a with a variety of organic compounds (L) give the neutral adducts NbF₅L [L = Me₂CO, 3a; L = MeCHO, 3b; L = Ph₂CO, 3c; L = tetrahydrofuran (thf), 3d; L = MeOH, 3e; L = EtOH, 3f; L = HOCH₂CH₂OMe, 3g; L = Ph₃PO, 3h; L = NCMe, 3i] in good yields. The complexes MF₅L [M = Nb, L = HCONMe₂, 3j; M = Nb, L = (NMe₂)₂CO, 3k; M = Ta, L = (NMe₂)₂CO, 3l; M = Nb, L = OC(Me)CHCMe₂, 3m] have been detected in solution in admixture with other unidentified products, upon 2:1 molar reaction of 1 with the appropriate reagent L. The ionic complexes [NbF₄(tht)₂][NbF₆], 4a, and [NbF₄(tht)₂][Nb₂F₁₁], 4b, have been obtained by combination of tetrahydrothiophene (tht) and 1a, in 1:1 and 2:3 molar ratios, respectively. The treatment of 1 with a two-fold excess of L leads to the species [MF₄L₄][MF₆] [M = Nb, L = HCONMe₂, 5a; M = Ta, L = HCONMe₂, 5b; M = Nb, L = thf, 5c; M = Ta, L = thf, 5d; M = Nb, L = OEt₂, 5e]. The new complexes have been fully characterised by NMR spectroscopy. Moreover, the revised ¹⁹F NMR features of the known compounds MF₅L [M = Ta, L = Me₂CO, 3n; M = Ta, L = Ph₂CO, 3o; M = Ta, L = MePhCO, 3p; M = Ta, L = thf, 3q; M = Nb, L = CH₃CO₂H, 3r; M = Nb, L = CH₂ClCO₂H, 3s; M = Ta, L = CH₂ClCO₂H, 3t], TaF₄(acac), TaF₄(Me-acac) and [TaF(Me-acac)₃][TaF₆] (Me-acac = methylacetylacetonato anion) are reported.     

Formation and structural characterization of mercury complexes from Te(R)CH2SiMe3 (R = Ph, CH2SiMe3) and HgCl2

The reaction of HgCl₂ and Te(R)CH₂SiMe₃ [R = CH₂SiMe₃ (1), Ph (2)] in ethanol yielded a mononuclear complex [HgCl₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 3a; R = CH₂SiMe₃, 3b). The recrystallization of 3a or 3b from CH₂Cl₂ produced a dinuclear complex [Hg₂Cl₂(μ-Cl)₂{Te(R)CH₂SiMe₃}₂] (R = Ph, 4a; R = CH₂SiMe₃, 4b). When 3a was dissolved in CH₂Cl₂, the solvent quickly removed, and the solid recrystallized from EtOH, a stable ionic [HgCl{Te(Ph)CH₂SiMe₃}₃]Cl·2EtOH (5a·2EtOH) was obtained. Crystals of [HgCl₂{Te(CH₂SiMe)₂}]·2HgCl₂·CH₂Cl₂ (6b·2HgCl₂·CH₂Cl₂) were obtained from the CH₂Cl₂ solution of 3b upon prolonged standing. The complex formation was monitored by ¹²⁵Te-, and ¹⁹⁹Hg NMR spectroscopy, and the crystal structures of the complexes were determined by single crystal X-ray crystallography.     

The chemistry of niobium and tantalum halides,MX5, with haloacetic acids and their related anhydrides: Anhydride C–H bond activation promoted by MF5

Niobium and tantalum pentahalides, MX₅ (1), react with acetic acid and halo-substituted acetic acids, in 1:1 ratio, to give the dinuclear complexes [MX₄(μ-OOCMe)]₂ [M = Nb, X = Cl, 2a; M = Ta, X = Cl, 2b; Br, 2c] and [MCl₄(μ-OOCR)]₂ [M = Nb, R = CH₂Cl, 4a; CHCl₂, 4c; CCl₃, 4e; CF₃, 4g; CHBr₂, 4i; CH₂I, 4j; M = Ta, R = CH₂Cl, 4b; CHCl₂, 4d; CCl₃, 4f; CF₃, 4h]. The solid state structures of 2b and 4e have been ascertained by X-ray diffraction studies. The reactions of 1 with acetic anhydride and halo-substituted acetic anhydrides result in C–O bond activation and afford 2 and 4, respectively, with concomitant formation of acetyl halides. Moreover, the complexes MCl₅[OC(Cl)Me] [M = Nb, 3a; M = Ta, 3b] have been detected in significant amounts within the mixtures of the reactions of MCl₅ with acetic anhydride. TaI₅ is unreactive, at room temperature, towards both MeCOOH and (MeCO)₂O. MF₅ react with RCOOH (R = Me, CH₂Cl) in 1:1 molar ratio, to afford the ionic compounds [MF₄(RCOOH)₂][MF₆], 5a–d, in high yields. The additions of (RCO)₂O (R = Me, CH₂Cl) to MF₅ give 5, suggesting that anhydride C–H and C–O bonds activation is operative during the course of these reactions.     

Titanocene-based group-11 metal ions; solid-state structure of {[(η-C5H4SiMe3)2Ti(CCPh)2]2Ag}NO3

The reaction of [Ti](CCR)₂ {[Ti] = (η⁵-C₅H₄SiMe₃)₂Ti; 1a, R = Fc, Fc = (η⁵-C₅H₄)Fe(η⁵-C₅H₅); 1b, R = Ph} with MX {2a, MX = [Cu(NCCH₃)₄]BF₄; M = Ag; 2b, X = ClO₄; 2c, X = NO₃} in a 2:1 molar ratio produces the trinuclear heterobimetallic (Ti₂M) or heptanuclear heterotrimetallic (Ti₂MFe₄) complexes [{[Ti](μ-σ,π-CCR)₂}₂M]X (R = Fc: 3a, M = Cu, X = BF₄; 3b, M = Ag, X = ClO₄. R = Ph: 3c, M = Cu, X = BF₄; 3d, M = Ag, X = ClO₄: 3e, M = Ag, X = NO₃) in high yield. Complexes 3c-3e are also accessible, when {[Ti](μ-σ,π-CCPh)₂}MX (M = Cu: 4a, X = FBF₃; M = Ag: 4b, X = OClO₃; 4c, X = ONO₂) is reacted with one equivalent of 1b. Transferring this reaction scheme to [Ti](CCSiMe₃)₂ (1c) only the formation of the heterobimetallic tweezer complex {[Ti](μ-σ,π-CCSiMe₃)₂}MX {4d, MX = [Cu(NCCH₃)]BF₄; 4e, MX = AgOClO₃} is observed which is attributed to the bulkiness of the acetylide-bound Me₃Si group. The solid-state structure of 3e is reported. In 3e, two [Ti](CCPh)₂ tweezer moieties are chelate-bound by their carbon-carbon triple bonds to a silver(I) ion, resulting in a pseudo-tetrahedral environment at the group-11 metal. is acting as counter-ion to cationic [{[Ti](CCPh)₂}₂Ag]⁺.Additionally, the result of cyclic voltammetric studies on [{[Ti](μ-σ,π-CCPh)₂}₂Cu]BF₄ (3c) is reported.     

Self-assembly syntheses and crystal structures of triorganotin(IV) pyridinecarboxylate: 1D polymers and a 42-membered macrocycle

A series of new triorganotin(IV) pyridinecarboxylates with 6-hydroxynicotinic acid (6-OH-3-nicH), 5-hydroxynicotinic acid (5-OH-3-nicH) and 2-hydroxyisonicotinic acid (2-OH-4-isonicH) of the types: [R₃Sn (6-OH-3-nic)·L]_n (I) (R = Ph, L = Ph·EtOH, 1; R = Bn, L = H₂O·EtOH, 2; R = Me, L = 0, 3; R = n-Bu, L = 0, 4), [R₃Sn (5-OH-3-nic)]_n (II) (R = Ph, 5; R = Bn, 6; R = Me, 7; R = n-Bu, 8), [R₃Sn (2-OH-4-isonic·L)]_n (III) (R = Bn, 9, L = MeOH; R = Me, L = 0, 10; R = Ph, 11, L = 0.5EtOH) have been synthesized. All the complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopy analyses. Among them, except for complexes 5 and 6, all complexes were also characterized by X-ray crystallography diffraction analysis. Crystal structures show that complexes 1-10 adopt 1D infinite chain structures which are generated by the bidentate O, O or N, O and the five-coordinated tin centers. Significant O-H?O, and N-H?O intermolecular hydrogen bonds stabilize these structures. Complex 11 is a 42-membered macrocycle containing six tin atoms, and forms a 2D network by intermolecular N-H?O hydrogen.     

Self-assembly of di- and triorganotin(IV) complexes: Syntheses, characterization and crystal structures of 1D polymeric chain containing O,O-diethyl or O,O-diisopropyl phosphoric acid ligands

A series of organotin(IV) complexes with O,O-diethyl phosphoric acid (L¹H) and O,O-diisopropyl phosphoric acid (L²H) of the types: [R₃Sn · L]_n (L = L¹, R = Ph 1, R = PhCH₂2, R = Me 3, R = Bu 4; L = L², R = Ph 9, R = PhCH₂10, R = Me 11, R = Bu 12), [R₂Cl Sn · L]_n (L = L¹, R = Me 5, R = Ph 6, R = PhCH₂7, R = Bu 8; L = L², R = Me 13, R = Ph 14, R = PhCH₂15, R = Bu 16), have been synthesized. All complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ³¹P and ¹¹⁹Sn) spectroscopy analysis. Among them, complexes 1, 2, 3, 5, 8, 9 and 11 have been characterized by X-ray crystallography diffraction analysis. In the crystalline state, the complexes adopt infinite 1D infinite chain structures which are generated by the bidentate bridging phosphonate ligands and the five-coordinated tin centers.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

Structural studies of phosphor-1,1-diselenoato Mn(I) and Re(I) complexes

Mononuclear complexes of the type, M(CO)₄[Se₂P(OR)₂] (M = Mn, R = ⁱPr, 1a; Et, 1b; M = Re, R = ⁱPr, 3a; Et, 3b) can be prepared from either [-Se(Se)P(OⁱPr)₂]₂ (A) or [Se{-Se(Se)P(OEt)₂}₂] (B) with M(CO)₅Br. O,O′-dialkyl diselenophosphate ([(RO)₂PSe₂]^-, abbreviated as dsep) ligands generated from A and B act as a chelating ligand in these complexes. Upon refluxing in acetonitrile, these mononuclear complexes yield dinuclear complexes with a general formula of [M₂(CO)₆{Se₂P(OR)₂}₂] (M = Mn, R = ⁱPr, 2a; Et, 2b; M = Re, R = ⁱPr, 4a; Et, 4b). Dsep ligands display a triconnective, bimetallic bonding mode in the dinuclear compounds and this kind of connective pattern has never been identified in any phosphor-1,1-diselenoato metal complexes. Compounds 2b, 3b, and 4 are structurally characterized. Compounds 2b and 3b display weak, secondary Se?Se interactions in their lattices.     

Structural diversity of di and triorganotin complexes with 4-sulfanylbenzoic acid: Supramolecular structures involving intermolecular Sn?O, O-H?O or C-H?X (X = O or S) interactions

Twelve new organotin complexes with 4-sulfanylbenzoic acid of two types: R_nSn[S(C₆H₄COOH)]_4−n (I) (n = 3: R = Me 1, n-Bu 2, Ph 3; PhCH₂4; n = 2: R = Me 5; n-Bu 6, Ph 7, PhCH₂8) and R₃Sn(SC₆H₄COO)SnR₃ · mEtOH (II) (m = 0: R = Me 9, n-Bu 10, PhCH₂12; m = 2: R = Ph 11), along with the 4,4′-bipy adduct of 9, [Me₃Sn(SC₆H₄COO)SnMe₃]₂(4,4-bipy) 13, have been synthesized. The coordination behavior of 4-sulfanylbenzoic acid is monodentate in 1-8 by thiol S atom but not carboxylic oxygen atom. While, in 9-13 it behaves as multidenate by both thiol S atom and carboxylic oxygen atoms. The supramolecular structures of 6, 11 and 13 have been found to consist of 1D molecular chains built up by intermolecular O-H?O, C-H?O or C-H?S hydrogen bonds. The supramolecular aggregation of 7 is 2D network determined by two C-H?O hydrogen bonds. Extended intermolecular C-H?O interactions in the crystal lattice of 9 link the molecules into a 2D network.     

Diiron-aminocarbyne complexes with amine or imine ligands: C-N coupling between imine and aminocarbyne ligands promoted by tolylacetylide addition to [Fe2{μ-CN(Me)R}(μ-CO)(CO)(NHCPh2)(Cp)2][SO3CF3]

A terminally coordinated CO ligand in the complexes [Fe₂{μ-CN(Me)R}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (R = Me, 1a; R = Xyl, 1b; Xyl = 2,6-Me₂C₆H₃), is readily displaced by primary and secondary amines (L), in the presence of Me₃NO, affording the complexes [Fe₂{μ-CN(Me)R}(μ-CO)(CO)(L)(Cp)₂][SO₃CF₃] (R = Me, L = NH₂Et, 4a; R = Xyl, L = NH₂Et, 4b; R = Me, L = NH₂Prⁱ, 5a; R = Xyl, L = NH₂Prⁱ, 5b; R = Xyl, L = NH₂C₆H₁₁, 6; R = Xyl, L = NH₂Ph, 7; R = Xyl, L = NH₃, 8; R = Me, L = NHMe₂, 9a; R = Xyl, L = NHMe₂, 9b; R = Xyl, = NH(CH₂)₅, 10). In the absence of Me₃NO, NH₂Et gives addition at the CO ligand of 1b, yielding [Fe₂{μ-CN(Me)(Xyl)}(μ-CO)(CO){C(O)NHEt}(Cp)₂] (11). Carbonyl replacement is also observed in the reaction of 1a-b with pyridine and benzophenone imine, affording [Fe₂{μ-CN(Me)R}(μ-CO)(CO)(L)(Cp)₂][SO₃CF₃] (R = Me, L = Py, 12a; R = Xyl, L = Py, 12b; R = Me, L = HNCPh₂, 13a; R = Xyl, L = HNCPh₂, 13b). The imino complex 13b reacts with p-tolylacetylide leading to the formation of the μ-vinylidene-diaminocarbene compound [Fe₂{μ-η¹:η²- CC(Tol)C(Ph)₂N(H)CN(Me)(Xyl){(μ-CO)(CO)(Cp₂)] (15) which has been studied by X-ray diffraction.     

Re-visiting of 5-[(E)-2-(aryl)-1-diazenyl]-quinolin-8-ol with tweaking of Sn-Ph groups: Synthesis, spectroscopic characterization and X-ray crystallography

Reactions of sodium 5-[(E)-2-(aryl)-1-diazenyl]quinolin-8-olates (LH, where the aryl group is an R-substituted phenyl ring such that for L¹H: R = H; L²H: R = 2′-CH₃; L³H: R = 3′-CH₃; L⁴H: R = 4′-CH₃; L⁵H: R = 4′-OCH₃ and L⁶H: R = 4′-OC₂H₅) with Ph₃SnCl in a 1:1 molar ratio yielded complexes of composition Ph₃SnL. The complexes have been characterized by ¹H, ¹³C, ¹¹⁹Sn NMR, IR and ^119mSn Mössbauer spectroscopic techniques in combination with elemental analyses. The crystal structures of Ph₃SnL¹ · 0.5C₆H₆ (1), Ph₃SnL² (2), Ph₃SnL⁵ · C₆H₆ (5) and Ph₃SnL⁶ · 0.5C₆H₆ (6) were determined. The results of the X-ray studies indicated that the benzene solvated compounds 1, 5 and 6 are distorted square pyramid, with one of the phenyl C atoms in the apex while the ligand arrangement around central Sn atom in 2 is distorted trigonal-bipyramidal, with a phenyl C and the oxinato N atoms in axial positions.     

Synthesis, characterization and electrochemical behavior of unsymmetric transition metal-terminated biphenyl ethynyl thiols

The synthesis of the biphenyl alkynyl thiols and thioesters R′-CC-C₆H₄-C₆H₄-SR (3: R′ = SiMe₃, R = C(O)Me; 4: R′ = SiMe₃, R = H; 5: R′ = H, R = C(O)Me) from I-C₆H₄-C₆H₄-SC(O)Me (1) is described. Molecules 1 and 5 have been used as starting materials in the synthesis of mono- and heterobimetallic transition metal complexes of type L_nM′-CC-C₆H₄-C₆H₄-SR (7: L_nM′ = Fc, R = C(O)Me; 8: L_nM′ = Fc, R = H; 10: L_nM′ = (Ph₃P)Au, R = C(O)Me; 14: L_nM′ = FcPPh₂-Au, R = C(O)Me; Fc = (η⁵-C₅H₅)(η⁵-C₅H₄)Fe; FcPPh₂ = (η⁵-C₅H₅)(η⁵-C₅H₄PPh₂)Fe). While complex 7is accessible by the Sonogashira cross-coupling of Fc-CCH (6) with 1, molecules 10 and 14 can be prepared by treatment of the thioester 5 with (Ph₃P)AuCl (9) and FcPPh₂-AuCl (13), respectively.The molecular solid state structures of 3, 7, 10 and 13-15 have been determined by single crystal X-ray crystallographic analysis. Typical features of these species are their linear M-CC-C₆H₄-C₆H₄-SR structure and the lack of coplanarity of the biphenyl arene rings. The overall length of these complexes are 13.345(2) Å for 3 (molecule A), 15.146(3) Å for 7, 15.705(2) Å for 10 (molecule A) and 15.649(4) Å for 14. The thioester groups are pointing away from the ferrocene building block. In 7 a linear 1D chain is set-up by π-interactions between two independent molecules of 7. Characteristic for 15 is the formation of a Au₂I₂ ring, while 13 is monomeric.All compounds were studied with cyclic voltammetry. Characteristic are the reversible ferrocene Fe(II)/Fe(III) redox wave, the irreversible reduction of Au(I) to Au(0), the oxidative cleavage of the S-C(O)Me sulfur-carbon (3, 5, 7, 10 and 14) and of the sulfur-hydrogen bond (4 and 8), respectively. Electronic effects extending from the -SH-end group to the ferrocene unit resulting in considerable shifts of the redox potential of the latter entity are found. Coordination of Au(I) at the FcPPh₂ moiety also results in a shift of the redox potential of the ferrocene group indicative of an electron withdrawing effect of the Au(I) species.     

Synthesis, characterization and bromination of bis(phosphinoferrocenyl) gold(I) compounds

Reaction of [(dppf)Au₂Br₂] (3) {dppf = 1,1′-bis(diphenylphosphino)ferrocene} and [(dippf)Au₂Br₂] (4) {dippf = 1,1′-bis(diisopropylphosphino)ferrocene} with excess bromine yields two new complexes [(C₅H₄Br₃)(PR₂)AuBr] (R = Ph, 5; R = i-Pr, 6). Bromination of the free diphosphinoferrocene ligands produces the expected brominated cyclopentenes (C₅H₄Br₃)(PR₂) (R = Ph, 7; R = i-Pr, 8) in good yields; however, these compounds could not be complexed to gold due to reduced basicity of 7 and 8. When the bromination is performed under wet aerobic conditions the oxidized pseudo-centrosymmetric product, [doppf][FeBr₄] (9) {doppf = 1,1′-bis(oxodiphenylphosphino)ferrocene, is formed as the major product. Solid-state structures of 1, 2, 4, 6, and 9 have been established by means of single-crystal X-ray crystallography.     

Dihalogen-halogenomethyl complexes of indium(III) X2InCH2X (X = Br, I): Simultaneous coordination of soft and hard ligands

Halogenomethyl-dihalogen-indium(III) compounds X₂InCH₂X (X = Br, I) obtained from indium monohalides and methylene dihalides were reacted with the soft donor ligands dialkylsulfides, R₂S (R = CH₃, CH₂Ph) to afford the corresponding dialkylsulfonium methylide complexes of InX₃, X₃InCH₂SR₂ (X = Br, R = CH₃, 1; X = I, R = CH₃, 2; X= I, R = CH₂Ph, 3). Compound 1 was reacted with the hard donor ligands dimethylsulfoxide or triphenylphosphine oxide to give the corresponding 1:1 adduct, Br₃(L)InCH₂S(CH₃)₂ (L = (CH₃)₂SO, 4; L = (C₆H₅)₃PO, 5). Compounds 1-5 were fully characterized in solution by NMR spectroscopy and in the solid state by X-ray methods.     

Hydride addition at μ-vinyliminium ligand obtained from disubstituted alkynes

New μ-vinylalkylidene complexes cis-[Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αHN(Me)(R)}(μ-CO)(CO)(Cp)₂] (R = Me, R′ = R″ = Me, 3a; R = Me, R′ = R″ = Et, 3b; R = Me, R′ = R″ = Ph, 3c; R = CH₂Ph, R′ = R″ = Me, 3d; R = CH₂Ph, R′ = R″ = COOMe, 3e; R = CH₂ Ph, R′ = SiMe₃, R″ = Me, 3f) have been obtained b yreacting the corresponding vinyliminium complexes [Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (2a-f) with NaBH₄. The formation of 3a-f occurs via selective hydride addition at the iminium carbon (C_α) of the precursors 2a-f. By contrast, the vinyliminium cis-[Fe₂{μ-η¹:η³-C_γ (R′) = C_β(R″)C_α = N(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R′ = R″ = COOMe, 4a; R′ = R″ = Me, 4b; R′ = Prⁿ, R″ = Me, 4c; Prⁿ = CH₂CH₂CH₃, Xyl = 2,6-Me₂C₆H₃) undergo H⁻ addition at the adjacent C_β, affording the bis-alkylidene complexes cis-[Fe₂{μ-η¹:η²-C(R′)C(H)(R″)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], (5a-c). The cis and trans isomers of [Fe₂{μ-η¹:η³-C_γ(Et)C_β(Et)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (4d) react differently with NaBH₄: the former reacts at C_α yielding cis-[Fe₂{μ-η¹:η³-C_γ(Et)C_β(Et)C_αHN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], 6a, whereas the hydride attack occurs at C_β of the latter, leading to the formation of the bis alkylidene trans-[Fe₂{μ-η¹:η²-C(Et)C(H)(Et)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (5d). The structure of 5d has been determined by an X-ray diffraction study. Other μ-vinylalkylidene complexes cis-[Fe₂{μ-η¹:η³-C_γ(R′)C_β(R″)C_αHN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂], (R′ = R″ = Ph, 6b; R′ = R″ = Me, 6c) have been prepared, and the structure of 6c has been determined by X-ray diffraction. Compound 6b results from treatment of cis-[Fe₂{μ-η¹:η³-C_γ(Ph)C_β(Ph)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (4e) with NaBH₄, whereas 6c has been obtained by reacting 4b with LiHBEt₃. Both cis-4d and trans-4d react with LiHBEt₃ affording cis-6a.     

New triorganotin(IV) complexes of polyfunctional S,N,O-ligands: Supramolecular structures based on π?π and/or C-H?π interactions

A series of new triorganotin(IV) complexes with 4-hydroxy-2-mercapto-6-methylpyrimidine (L¹H₂), 4-hydroxy-2-mercapto-pyrimidine (L²H₂), 2,4(1H,3H)-pyrimidinedithione (L³H₂) (Scheme 1) of the type R₃SnLSnR₃ (R = Me 1, 4, 7; R = Ph 2, 5, 8; R = PhCH₂3, 6, 9) have been synthesized by reactions of triorganotin(IV) chloride and corresponding ligands. All complexes are characterized by elemental analyses, IR spectra and NMR spectra analyses. Among them, complexes 2, 5 and 8 are also characterized by X-ray crystallography diffraction analyses. Significant π?π stacking, C-H?π interactions and intramolecular hydrogen bonds stabilize these structures.     

Olefin-aminocarbyne coupling in diiron complexes: Synthesis of new bridging aminoallylidene complexes

The bridging aminocarbyne complexes [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (R = Me, 1a; Xyl, 1b; 4-C₆H₄OMe, 1c; Xyl = 2,6-Me₂C₆ H₃) react with acrylonitrile or methyl acrylate, in the presence of Me₃NO and NaH, to give the corresponding μ-allylidene complexes [Fe₂{μ-η¹:η³- C_α(N(Me)(R))C_β(H)C_γ(H)(R′)}(μ-CO)(CO)(Cp)₂] (R = Me, R′ = CN, 3a; R = Xyl, R′ = CN, 3b; R = 4-C₆H₄OMe, R′ = CN, 3c; R = Me, R′ = CO₂Me, 3d; R = 4-C₆H₄OMe, R′ = CO₂Me, 3e). Likewise, 1a reacts with styrene or diethyl maleate, under the same reaction conditions, affording the complexes [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(R′)C_γ(H)(R″)}(μ-CO)(CO)(Cp)₂] (R′ = H, R″ = C₆H₅, 3f; R′ = R″ = CO₂Et, 3g). The corresponding reactions of [Ru₂{μ-CN(Me)(CH₂Ph)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃] (1d) with acrylonitrile or methyl acrylate afford the complexes [Ru₂{μ-η¹:η³-C_α(N(Me)(CH₂Ph))C_β(H)C_γ(H)(R′)}(μ-CO)(CO)(Cp)₂] (R′ = CN, 3h; CO₂Me, 3i), respectively.The coupling reaction of olefin with the carbyne carbon is regio- and stereospecific, leading to the formation of only one isomer. C-C bond formation occurs selectively between the less substituted alkene carbon and the aminocarbyne, and the C_β-H, C_γ-H hydrogen atoms are mutually trans.The reactions with acrylonitrile, leading to 3a-c and 3h involve, as intermediate species, the nitrile complexes [M₂{μ-CN(Me)(R)}(μ-CO)(CO)(NC-CHCH₂)(Cp)₂][SO₃CF₃] (M = Fe, R = Me, 4a; M = Fe, R = Xyl, 4b; M = Fe, R = 4-C₆H₄OMe, 4c; M = Ru, R = CH₂C₆H₅, 4d).Compounds 3a, 3d and 3f undergo methylation (by CH₃SO₃CF₃) and protonation (by HSO₃CF₃) at the nitrogen atom, leading to the formation of the cationic complexes [Fe₂{μ-η¹:η³-C_α(N(Me)₃)C_β(H)C_γ(H)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = CN, 5a; R = CO₂Me, 5b; R = C₆H₅, 5c) and [Fe₂{μ-η¹:η³-C_α(N(H)(Me)₂)C_β(H)C_γ(H)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = CN, 6a; R = CO₂Me, 6b; R = C₆H₅, 6c), respectively.Complex 3a, adds the fragment [Fe(CO)₂(THF)(Cp)]⁺, through the nitrile functionality of the bridging ligand, leading to the formation of the complex [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(H)C_γ(H)(CNFe(CO)₂Cp)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (9).In an analogous reaction, 3a and [Fe₂{μ-CN(Me)(R)}(μ-CO)(CO)₂(Cp)₂][SO₃CF₃], in the presence of Me₃NO, are assembled to give the tetrameric species [Fe₂{μ-η¹:η³-C_α(NMe₂)C_β(H)C_γ(H)(CN[Fe₂{μ- CN(Me)(R)}(μ-CO)(CO)(Cp)₂])}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (R = Me, 10a; R = Xyl, 10b; R = 4-C₆H₄OMe, 10c).The molecular structures of 3a and 3b have been determined by X-ray diffraction studies.     

Pd(0) and Pd(II) derivatives with heteroannularly bridged chiral ferrocenyl diphosphine ligands - A stereochemical analysis

The ligands (S_c, S_p)-1-diphenylphosphino-2,1′-(1-dicyclohexylphosphinopropanediyl)ferrocene, (S_c, S_p)-PP^CyPF, and (S_c, S_p)-1-diphenylphosphino-2,1′-(1-diphenylphosphinopropanediyl)ferrocene, (S_c, S_p)-PP^PhPF, have been used in the synthesis of the new Pd(0) and Pd(II) derivatives [Pd(PP^CyPF)(DMFU)] (1) (DMFU = dimethylfumarate), [Pd(PP^CyPF)(MA)] (2) (MA = maleic anhydride), [Pd(η³-2-Me-C₃H₄)(PP)]OTf (PP = PP^CyPF, 3; PP^PhPF, 4) (OTf = triflate), [PdRR′(PP)] (R = Me, R′ = Cl, PP = PP^CyPF, 5, PP^PhPF, 6; R = R′ = Me, PP = PP^CyPF, 7, PP^PhPF, 8; R = R′ = C₆F₅, PP = PP^CyPF, 9, PP^PhPF, 10). The molecular structure of 7 has been determined by X-ray diffraction. In the cases of complexes 1-4 two isomers are formed depending on the orientation of the ancillary ligand with respect to the ferrocenyl core. The stereochemistry of these complexes has been determined. In complex 6 the two possible isomers are obtained whereas in complex 5 the derivative with the Me group trans to PPh₂ is selectively formed. Restricted rotation of the pentafluorophenyl groups with respect to the Pd-C bond has been found in 9 and 10. In all derivatives the conformation of the ferrocenyl ligand is the same as that seen by X-ray diffraction and deduced from NMR data.