From alkenylphosphane aminoallenylidene ruthenium(II) complexes to highly unsaturated ruthenaphosphabicycloheptene complexes

The alkenylaminoallenylidene complex [Ru(η⁵-C₉H₇){CCC(NEt₂)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (2) has been prepared by the reaction of the allenylidene [Ru(η⁵-C₉H₇)(CCCPh₂){κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (1) with the ynamine MeCCNEt₂. The reaction proceeds regio- and stereoselectively, and the insertion of the ynamine takes place exclusively at the C_βC_γ bond of the unsaturated chain. The secondary allenylidene [Ru(η⁵-C₉H₇){CCC(H)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (3) is obtained, in a one-pot synthesis, from the reaction of aminoallenylidene 2 with LiBHEt₃ and subsequent treatment with silica. Moreover, the addition of an excess of NaBH₄ to a solution of the complex 2 in THF at room temperature gives exclusively the alkynyl complex [Ru(η⁵-C₉H₇){CCCH₂[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)] (5). The heating of a solution of allenylidene derivative 3 in THF at reflux gives regio- and diastereoselectively the cyclobutylidene complex [Ru(η⁵-C₉H₇) (PPh₃)][PF₆](4) through an intramolecular cycloaddition of the CC allyl and the C_αC_β bonds in the allenylidene complex 3. The structure of complex 4 has been determined by single crystal X-ray diffraction analysis.     

Synthesis, characterization and solid state structures of thiosemicarbazone palladacycles: Influence of hydrogen bonding in the molecular arrangement

Treatment of the thiosemicarbazones 4-FC₆H₄C(Me)NN(H)C(S)NHR, (R = Me, a; Ph, b) and 2-ClC₆H₄C(Me)NN(H)C(S)NHR (R = Ph, c) with lithium tetrachloropalladate(II) in methanol or palladium(II) acetate in acetic acid gave the tetranuclear cyclometallated complex [Pd{4-FC₆H₃C(Me)NNC(S)NHR}]₄ (1a, 1b) and [Pd{2-ClC₆H₃C(Me)NNC(S)NHPh}]₄ (1c). Reaction of these tetramers with the diphosphines dppe, t-dppe, dppp or dppb in a 1:2 molar ratio gave the dinuclear cyclometallated complexes [(Pd{4-FC₆H₃C(Me)NNC(S)NHR})₂(μ-Ph₂P(CH₂)_nPPh₂)], (n = 2, 2a, 2b; 3, 4a, 4b; 4, 5a, 5b), [(Pd{4-FC₆H₃C(Me)NNC(S)NHPh})₂(μ-Ph₂PCHCHPPh₂)], (3a, 3b) and [(Pd{2-ClC₆H₃C(Me)NNC(S)NHR})₂(μ-Ph₂P(CH₂)_nPPh₂)], (n = 2, 2c, 2d; 3, 4c, 4d; 4, 5c, 5d), [(Pd{2-ClC₆H₃C(Me)NNC(S)NHPh})₂(μ-PPh₂CHCHPPh₂)], (3c, 3d). The X-ray crystal structure of the ligand b and the complexes 3c, 4a and 4d were determined. The structures of complexes 4a and 4d show that the different disposition of the chain cyclometallated of the thiosemicarbazones (in the same orientation or in the opposite one) is due to the different H bonds produced.     

Further reactions of some bis(vinylidene)diruthenium complexes

Whereas {Ru(dppm)Cp*}₂(μ-CCCC) (2) is the only product formed by deprotonation of [{Ru(dppm)Cp*}₂{μ(CCHCHC)}]⁺ with dbu, a mixture of 2 with Ru{CCCHCH(PPh₂)₂[RuCp*]}(dppm)Cp* (3) and {Cp*Ru(PPh₂CHCCH-)}₂ (4) is obtained with KOBu^t. A similar reaction with [{Ru(dppm)Cp*}₂{μ(CCMeCMeC)}]⁺ (5) gave Ru{CCCMeCH(PPh₂)₂[RuCp*]}(dppm)Cp* (6). X-ray structures of 4, 5 and 6 confirm the presence of the 1-ruthena-2,4-diphosphabicyclo[1.1.1]pentane moiety, which is likely formed by an intramolecular attack of the deprotonated dppm ligand on C(1) of the vinylidene ligand. Protonation of {Ru(dppe)Cp*}₂(μ-CCCC) (8-Ru) regenerates its precursor [{Ru(dppe)Cp*}₂{μ(CCHCHC)}]²⁺ (7-Ru). Ready oxidation of the bis(vinylidene) complex affords the cationic carbonyl [Ru(CO)(dppe)Cp*]PF₆ (9) (X-ray structure).     

Further chemistry of ruthenium butatrienylidene complexes

Several complexes have been obtained from reactions carried out in early attempts to prepare the diynyl complexes Ru(CCCCR)(dppe)Cp* (R = H, SiMe₃). These have been identified crystallographically as the acyl complex Ru{CCC(O)Me}(dppe)Cp* (3), the cationic imido complex [Ru{CCC(NH₂)Me}(dppe)Cp*]PF₆ (4), the binuclear butenynylallenylidene [{Ru(dppe)Cp*}₂{μ-CCC(OMe)CHCMeCC}]PF₆ (5), and the bis(ethynyl)cyclobutenylidene [{Ru(dppe)Cp*}₂{μ-CCC₄H₂(SiMe₃)CC}]PF₆ (6). NMR studies of 5 have revealed the existence of two isomers. Plausible routes for their formation from the putative butatrienylidene intermediate [Ru(CCCCH₂)(dppe)Cp*]⁺ (A) are discussed.     

Additions and intramolecular migrations of nucleophiles in cationic diruthenium μ-allenyl complexes

The diruthenium μ-allenyl complex [Ru₂(CO)(NCMe)(μ-CO){μ-η¹:η²-C(H)CC(Me)(Ph)}(Cp)₂][BF₄], 3b, reacts with halide anions to yield the neutral derivatives [Ru₂(CO)₂(X){μ-η¹:η²-C(H)CC(Me)(Ph)}(Cp)₂] [X = Cl, 4b; X = Br, 4c; X = I, 4d]. Complex 4b undergoes isomerization to the unprecedented bridging vinyl-chlorocarbene species [Ru₂(CO)(μ-CO){μ-η¹:η³- C(Cl)C(H)C(Me)(Ph)}(Cp)₂], 10, upon filtration of a CH₂Cl₂ solution through an alumina column.Complex 3b reacts with an excess of NaBH₄ to give five products: the allene complex [Ru₂(CO)₂{μ-η²:η²- CH₂CC(Me)(Ph)}(Cp)₂], 5; the hydride species trans-[Ru₂(CO)₂(μ-H){μ-η¹:η²-CHCC(Me)(Ph)}(Cp)₂], 6, and cis-[Ru₂(CO)₂(μ-H){μ-η¹:η²-CHCC(Me)(Ph)}(Cp)₂], 8; the vinyl-alkylidene [Ru₂(CO)(μ-CO){μ-η¹:η³- C(H)C(H)C(Me)(Ph)}(Cp)₂], 9; and the cluster [Ru₃(CO)₃(μ-H)₃(Cp)₃], 7.Studies on the thermal stabilities of 5, 6, 8 and 9 have suggested a plausible mechanism for the formation of these complexes and for the synthesis of 10.     

Palladacycles bearing pendant benzamidinate ligands as catalysts for the Suzuki and Heck coupling reactions

Three pendant benzamidines [Ph-C(NC₆H₅)-{NH(CH₂)₂NMe₂}] (1), [Ph-C(NC₆H₅)-{NH(CH₂Py)}] (2) and [Ph-C(NC₆H₅)-{NH(o-C₆H₄)(oxazoline)}] (3) are described. Reactions of 1, 2 or 3 with one molar equivalent of Pd(OAc)₂ in THF give the palladacyclic complexes [Ph-C{-NH(η¹-C₆H₄)}{N(CH₂)₂NMe₂}]Pd(OAc) (4), [Ph-C{-NH(η¹-C₆H₄)}{N (CH₂Py)}]Pd(OAc) (5) and [Ph-C{-NH(η¹-C₆H₄)}{N(o-C₆H₄)(oxazoline)}]Pd(OAc) (6), respectively. Treatment of 4, 5 or 6 with excess of LiCl in chloroform affords [Ph-C{-NH(η¹-C₆H₄)}{N(CH₂)₂NMe₂}]PdCl (7), [Ph-C{-NH(η¹-C₆H₄)}{N(CH₂Py)}]PdCl (8) and [Ph-C{-NH(η¹-C₆H₄)}{N(o-C₆H₄)(oxazoline)}]PdCl (9). The crystal and molecular structures are reported for compounds 1, 3, 5, 6 and 7. The application of these palladacyclic complexes to the Suzuki and Heck coupling reactions was examined.     

Linear homobimetallic palladium complexes with end-capped SC(O)Me units

Rigid-rod structured homobimetallic palladium complexes of type [{trans-(Me(O)CS-4-C₆H₄-C₆H₄)(Ph₃P)₂Pd}₂(μ-N^∩N)](OTf)₂ (8a, μ-N^∩N = 4,4′-bipyridine, bpy; 8b, μ-N^∩N = C₅H₄N-CHN-NCH-C₅H₄N; 8c, μ-N^∩N = C₅H₄N-CHCH-C₆H₄-CHCH-C₅H₄N; 8d, μ-N^∩N = C₅H₄N-CHN-C₆H₄-NCH-C₅H₄N) were synthesized by the reaction of trans-[(Me(O)CS-4-C₆H₄-C₆H₄)(Ph₃P)₂Pd](OTf) (6) with 0.5 equivalents of N^∩N (7a, N^∩N = bpy; 7b, N^∩N = C₅H₄N-CHN-NCH-C₅H₄N; 7c, N^∩N = C₅H₄N-CHCH-C₆H₄-CHCH-C₅H₄N; 7d, N^∩N = C₅H₄N-CHN-C₆H₄-NCH-C₅H₄N) in high yield. Complex 6 was accessible by the subsequent reaction of I-4-C₆H₄-C₆H₄-4′-SC(O)Me (2) with [(PPh₃)₄Pd] (3) to produce trans-[(I)(Me(O)CS-4-C₆H₄-C₆H₄)(Ph₃P)₂Pd] (4) which further reacted with AgOTf (5) to give 6.The structures of 4 and 8c in the solid state are reported. Most characteristic for these systems is the square-planer coordination geometry of palladium with trans-positioned PPh₃ groups. This automatically positions the iodo ligand and the Me(O)CS-4-C₆H₄-C₆H₄ unit (complex 4) or the nitrogen donor atoms of the C₅H₄N-CHCH-C₆H₄-CHCH-C₅H₄N connectivity and the thio-acetyl group Me(O)CS-C₆H₄-C₆H₄ (complex 8c) trans to each other. In 8c a Pd-Pd separation of 20.156 Å is typical.The electrochemical redox behavior of 2, 4 and 8 is discussed.     

Thiocarbene and alkoxycarbene tungsten complexes exhibit typically different reaction paths

The condensation of (butyl)thiocarbene tungsten complex [(OC)₅WC(SEt)Bu] (1a) with an α,β-unsaturated secondary acid amide R²CHCHC(O)NHR¹4 in the presence of POCl₃/Et₃N gives cyclopentadienimines 12, whereas the isostructural alkoxycarbene complex [(OC)₅WC(OEt)Bu] (1c) under similar conditions affords a (N-enamino)ethoxycarbene compound 9. Furthermore, condensation of the (methyl)thiocarbene tungsten complex [(OC)₅WC(SEt)Me] (1b) with an amide 4 yields cyclopentenimines 19 and allenylidene complexes 20, whereas the corresponding ethoxycarbene complex [(OC)₅WC(OEt)CH₃] (1d) forms 4-NH-amino-1-tungsta-1,3,5-hexatrienes 16 under similar conditions.     

Cyclometallated thiosemicarbazone palladium(II) compounds: The first crystal and molecular structures of mononuclear complexes with a η-diphosphine ligand

Treatment of the thiosemicarbazones 2-XC₆H₄C(Me)NN(H)C(S)NHR (R = Me, X = F, a; R = Et, X = F, b; R = Me, X = Cl, c; R = Et, X = Br, d) with potassium tetrachloropalladate(II) in ethanol, lithium tetrachloropalladate(II) in methanol or palladium(II) acetate in acetic acid, as appropriate, gave the tetranuclear cyclometallated complexes [Pd{2-XC₆H₃C(Me)NNC(S)NHR}]₄ (1a-1d). Reaction of 1a-1d with the diphosphines Ph₂PCH₂PPh₂ (dppm), Ph₂P(CH₂)₂PPh₂ (dppe), Ph₂P(CH₂)₃PPh₂ (dppp) or trans-Ph₂PCHCHPPh₂ (trans-dpe) in 1:2 molar ratio gave the dinuclear cyclometallated complexes [{Pd[2-XC₆H₃C(Me)NNC(S)-NHR]}₂(μ-diphosphine-P,P)] (2a-5a, 3b, 3d, 4c, 5c). Reaction of 1a, 1b with the short-bite or long-bite diphosphines, dppm or cis-dpe, in a 1:4 molar ratio gave the mononuclear cyclometallated complexes [Pd{2-XC₆H₃C(Me)NNC(S)NHR}(diphosphine-P)] (6a, 6b, 7a). The molecular structure of ligand a and of complexes 1a, 3d, 5a, 5c, 6a, 6b and 7a have been determined by X-ray diffraction analysis. The structure of complex 7a shows that the long-bite cis-bis(diphenylphosphino)ethene phosphine appears as monodentate with an uncoordinated phosphorus donor atom.     

The reactions of some σ-alkynylnickel complexes with 7,7,8,8-tetracyanoquinodimethane

The σ-alkynyl complexes Ni(η⁵-C₅H₅)(PPh₃)-CC-R (1), Ni(η⁵-C₅H₅)(PPh₃)-CC-X-CCH (2) and Ni(η⁵-C₅H₅)(PPh₃)-CC-X-CC-Ni(η⁵-C₅H₅)(PPh₃) (3), reactwith 7,7,8,8-tetracyanoquinodimethane, TCNQ, at 30 °C by insertion of the alkyne CC into a CC(CN)₂ bond to give Ni(η⁵-C₅H₅)(PPh₃)-C{C₆H₄C(CN)₂}-C{C(CN)₂}-R (4), from 1, Ni(η⁵-C₅H₅)(PPh₃)-C{C₆H₄C(CN)₂}-C{C(CN)₂}-X-CCH (5), from 2, and Ni(η⁵-C₅H₅)(PPh₃)-C{C₆H₄C(CN)₂}-C{C(CN)₂}-X-CC-Ni(η⁵-C₅H₅)(PPh₃) (6),and Ni(η⁵-C₅H₅)(PPh₃)-C{C₆H₄C(CN)₂}- C{C(CN)₂}-X-C{C(CN)₂}-C{C₆H₄C(CN)₂}-Ni(η⁵-C₅H₅)(PPh₃) (7),from 3 {R = (a) C₆H₅, (b) 4-PhC₆H₄, (c) 4-Me₂NC₆H₄, (d) 1-C₁₀H₇ (1-naphthyl), (e) 2-C₁₀H₇ (2-naphthyl), (f) 9-C₁₄H₉ (9-phenanthryl), (g) 9-C₁₄H₉ (9-anthryl), (h) 3-C₁₆H₉ (3-pyrenyl), (i) 1-C₂₀H₁₁ (1-perylenyl), (j) 2-C₄H₃S (2-thienyl), (k) C₁₀H₉Fe (ferrocenyl = Fc) and (l) H; X = (a) nothing, (b) 1,4-C₆H₄, (c) 1,3-C₆H₄ and (d) 4,4′-C₆H₄-C₆H₄}. The reaction is regiospecificand the other possible insertion product, R-C{C₆H₄C(CN)₂}-C{C(CN)₂}-Ni(η⁵-C₅H₅)(PPh₃) etc., is not formed. Under the same conditions, there is no evidencefor the reaction of TCNQ with the -CCH of 2, PhCCH, 1,4-C₆H₄(CCH)₂ or FcCCH, or for the reaction of more than one CC(CN)₂ of TCNQ with a Ni-alkynyl moiety. Complexes 4-7 are all air-stable, purple solids which have been characterised by elemental analysis and spectroscopy (IR, UV-Vis, ¹H NMR and ¹³C NMR),and by X-ray diffraction for 4a, 4b and 4l. The UV-Vis spectra of 4-7 are very similar. This implies that all contain the same active chromophore which, it is suggested, is Ni-C(5)C₆H₄C(CN)₂ and not R-C(4)C(CN)₂. This isconsistent with the molecular structures of 4a, 4b and 4l which show that the first of these potentially chromophoric fragments is planar or close to it with an in-built potential for delocalisation, whilst in the second the aryl group R is almost orthogonal to the CC(CN)₂ plane. The molecular structures of 4a, 4b and 4l also reveal a short Ni?C(4) separation, indicative of a Ni → C(4) donor-acceptor interaction. The electrochemistry of 4a shows aquasi reversible oxidation at ca. 1 V and complicated reduction processes. It is typical of most 4, but 4l is different in that it shows the same quasi reversible oxidation at ca. 1 V but two reversible reductions at −0.26 and −0.47 V (vs. [Fe(η⁵-C₅Me₅)₂]^+/0 0.0 V).     

Study of the reactivity of palladacycles containing [C(sp, ferrocene),N,S] or [C(sp),N,S] terdentate ligands with symmetric alkynes

The study of the reactivity of the cyclopalladated complex [Pd{[(η⁵-C₅H₃)-CHN-(C₆H₄-2-SMe)]Fe(η⁵-C₅H₅)}Cl] (1c) with the alkynes R¹-CC-R¹ (with R¹ = CO₂Me, Ph or Et) is reported.Compound 1c reacts with the equimolar amount of MeO₂C-CC-CO₂Me in refluxing CH₂Cl₂ to give [Pd{[(MeO₂C-CC-CO₂Me)(η⁵-C₅H₃)-CHN-(C₆H₄-2-SMe)]Fe(η⁵-C₅H₅)}Cl] (2c), which arises from the monoinsertion of the alkyne into the σ[Pd-C(sp², ferrocene)] bond.However, when the reaction was performed using Ph-CC-Ph or Et-CC-Et no evidence of the insertion of these alkynes into the σ[Pd-C(sp², ferrocene)] bond was detected.In contrast with these results, when 1c was treated with the Tl[BF₄] followed by the removal of the TlCl formed and the subsequent addition of MeO₂C-CC-CO₂Me the reaction gave 2c and [Pd{[(MeO₂C-CC-CO₂Me)₂(η⁵-C₅H₃)-CHN-(C₆H₄-2-SMe)]Fe(η⁵-C₅H₅)}][BF₄] (3c); but when the alkyne was R¹-CC-R¹ (with R¹ = Ph or Et), the ionic palladacycles [Pd{[(R¹-CC-R¹)₂(η⁵-C₅H₃)-CHN-(C₆H₄-2-SMe)]Fe(η⁵-C₅H₅)}][BF₄] · CH₂Cl₂ [with R¹ = Ph (5c) or Et (6c)] were isolated. In compounds 3c, 5c and 6c, the mode of binding of the butadienyl unit is η³. The reactions of 2c, 3c, 5c and 6c with PPh₃ are also reported. The results obtained from these studies reveal that the σ(Pd-S) bond in 2c is more prone to cleave than in 4c-6c. X-ray crystal structures of 2c, 5c and [Pd{[(MeO₂C-CC-CO₂Me)(η⁵-C₅H₃)-CHN-(C₆H₄-2-SMe)]Fe(η⁵-C₅H₅)}Cl(PPh₃)] (7c), are also described. Compound 7c arises from 2c by cleavage of the Pd-S bond and the incorporation of a PPh₃ in the coordination sphere of the palladium. A parallel study focused on the reactions of [Pd{[2-CH₂-4,6-Me₂-C₆H₂]-CHN-(C₆H₄-2-SMe)}Cl] (1d) (with a [Csp³,N,S]⁻ terdentate group) with the three alkynes reveals that the σPd-C(sp², ferrocene)] bond of 1c is more reactive than the σ[Pd-C(sp³)] bond of 1d.     

Synthesis, structure and photo-physical properties of phosphorus-supported fluorescent probes

Various phosphorus-supported fluorescent probes have been synthesized by the condensation reaction of multi-functional phosphorus hydrazides with various fluorophore-containing carboxaldehydes. Compounds, thus prepared, in this study are (PhO)₂P(O)[N(Me)-NCH-R] (1a, 1b), Ph₂P(O)[N(Me)-NCH-R] (2b, 2c, 2d), PhP(O)[N(Me)-NCH-R]₂ (3b, 3c), P(S)[N(Me)-NCH-R]₃ (4b, 4c), P(O)[N(Me)-NCH-R]₃ (5a, 5b, 5c), N₃P₃(O₂C₁₂H₈)₂[N(Me)-NCH-R]₂ (6a, 6b, 6c), N₃P₃(O₂C₁₂H₈)[N(Me)-NCH-R]₄ (7a, 7b, 7c, 7d) and N₃P₃[N(Me)-NCH-R]₆ (8b, 8c), where R=1-pyrenyl (a), 9-anthracenyl (b), 9-phenanthryl (c) and 7-(N,N′-diethylamino)-3-coumarinyl (d). All of these compounds have been characterized by various analytical techniques including ³¹P{¹H} NMR spectroscopy. Compounds 1b, 2b, 3b, 4b, 5b, 5c and 6d have also been characterized by single crystal X-ray analysis. All of these phosphorus-supported compounds exhibit excellent fluorescence properties in aqueous solution at near physiological conditions.     

SPh functionalized bridging-vinyliminium diiron and diruthenium complexes

The SPh functionalized vinyliminium complexes [Fe₂{μ-η¹:η³-C_γ(R′)C_β(SPh)C_αN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] [R = Xyl, R′ = Me, 2a; R = Me, R′ = Me, 2b; R = 4-C₆H₄OMe, R′ = Me, 2c; R = Xyl, R′ = CH₂OH, 2d; R = Me, R′ = CH₂OH, 2e; Xyl = 2,6-Me₂C₆H₃] are generated in high yields by treatment of the corresponding vinyliminium complexes [Fe₂{μ-η¹:η³-C_γ(R′)C_β(H)C_αN(Me)(R)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (1a-e) with NaH in the presence of PhSSPh. Likewise, the diruthenium complex [Ru₂{μ-η¹:η³-C_γ(Me)C_β(SPh)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (2f) was obtained from the corresponding vinyliminium complex [Ru₂{μ-η¹:η³-C_γ(Me)C_β(H)C_αN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂] (1f). The synthesis of 2c is accompanied by the formation, in comparable amounts, of the aminocarbyne complex [Fe₂{μ-CN(Me)(4-C₆H₄OMe)}(SPh)(μ-CO)(CO)(Cp)₂] (3).The molecular structures of 2d, 2e and 3 have been determined by X-ray diffraction studies.     

Synthesis of heterocyclic carbene ligands via 1,2,3-diheterocyclization of allenylidene complexes with dinucleophiles

Heterocyclic carbene complexes are accessible from π-donor-substituted allenylidene complexes, [(CO)₅CrCCC(NMe₂)Ph] (1) and [(CO)₅CrCCC(O-endo-Bornyl)OEt] (4), and various dinucleophiles by 1,2,3-diheterocyclization. The reaction of 1 with 1,2-dimethylhydrazine gives the 1,2-dimethylpyrazolylidene complex (2) in high yield in addition to small amounts of the α,β-unsaturated carbene complex [(CO)₅CrC(NMe₂)-C(H)C(NMe₂)Ph] (3). The analogous reaction of 4 with 1,2-dimethylhydrazine affords the 1,2-dimethylpyrazolylidene complex (5) and, via displacement of the C_γ-bound ethoxy substituent, the hydrazinoallenylidene complex [(CO)₅CrCCC(O-endo-Bornyl){NMe-N(H)Me}] (6). Treatment of 6 with catalytic amounts of acids induces cyclization to 5. On addition of 1,1-dimethylhydrazine to 1 the zwitterionic pyrazolium-5-ylidene complex (7) is formed. The reaction of 1 with 1,2-diaminocyclohexane affords a octahydro-benzo[1,4]diazepinylidene complex (10) and, via intermolecular substitution, a binuclear bisallenylidene complex (11). Thiazepinylidene complexes (12-14), containing 7-membered N/S-heterocyclic carbene ligands, are formed highly selectively in the reaction of 1 with 2-aminoethanethiol or related cysteine derivatives by a substitution/cyclization sequence. The analogous reaction of 1 with homocysteine methylester yields a thiazocanylidene complex (15). All new heterocyclic carbene ligands are strong donors exhibiting σ-donor/π-acceptor ratios similar to those of the known imidazolylidene complexes. On photolysis of 2 and 12 in the presence of triphenylphosphine, the corresponding cis-carbene tetracarbonyl triphenylphosphine complexes (16 and 17) are formed. The solid state structure of complexes 2, 7, 14, 15, and 16 is established by X-ray structural analysis.     

Assembly and incorporation of a CO2Me group into a bridging vinyliminium ligand in a diiron complex

The diiron complex [Fe₂{μ-к¹(O):η¹(C):η³(C)-C(N(Me)(Xyl))C(H)C(Me)C(O)OMe}(μ-CO)(Cp)₂] (2) has been obtained from the diiron bridging vinyliminium [Fe₂{μ-η¹:η³-C(Me)C(H)CN(Me)(Xyl)}(μ-CO)(CO)(Cp)₂][SO₃CF₃] (1; Xyl = 2,5-C₆H₃Me₂) upon treatment with NaH in the presence of CH₂CCMe₂, followed by chromatography on alumina with MeOH as eluent. The reaction consists in the incorporation of a methylcarboxylate unit, assembled from CO and MeO⁻, into the bridging vinyliminium ligand. The resulting complex 2 exhibits a C₄ fragment bridging the two iron centres through the carbonyl oxygen atom and the allylidene moiety.The X-ray molecular structure of 2 has been determined.     

Silicon version of enamines: Amino-substituted disilenes by the reactions of the disilyne RSiSiR (R = SiPr[CH(SiMe3)2]2) with amines

The reaction of 1,1,4,4-tetrakis[bis(trimethylsilyl)methyl]-1,4-diisopropyltetrasila-2-yne 1 with secondary or primary amines produced amino-substituted disilenes R(R₂′N)SiSiHR 2a-d (R = SiⁱPr[CH(SiMe₃)₂]₂, R₂′NEt₂N (2a), (CH₂CH₂)₂N (2b), ^tBu(H)N (2c), and Ph₂N (2d)). Spectroscopic and X-ray crystallographic analyses of 2 showed that 2a-c have a nearly coplanar arrangement of the SiSi double bond and the amino group, giving π-conjugation between the SiSi double bond and the lone pair on the nitrogen atom, whereas 2d has a nearly perpendicular arrangement precluding such conjugation. Theoretical calculations indicate that π-conjugation between the π-orbital of the SiSi double bond and the lone pair on the nitrogen atom is markedly influenced by the torsional angle between the SiSi double-bond plane and the amino-group plane.     

Reaction of metal carbonyl anions with electrophilic alkynes: Synthesis of isomeric η-acryloyl and σ-vinyl complexes

Treatment of the metal carbonylate anions [CpMo(CO)₂(L)]⁻ (Cp = η-C₅H₅; L = PPh₂Me, PPh₂Et) with the electrophilic alkynes methyl propiolate or DMAD (RCCCO₂Me, where R = H or CO₂Me, respectively) followed by protonation affords the η³-acryloyl (1-oxoallyl) complexes [CpMo(η³-COCRCHCO₂Me)(CO)(L)] (3a-d) as the major products, together with the isomeric vinyl complexes trans-[CpMo(CRCHCO₂Me)(CO)₂(L)] (4a-d). On the basis of the regioselectivity of the reaction, it is proposed that nucleophilic attack of the carbonylate anion occurs at the alkyne carbon bearing R; migration of the anionic vinyl ligand to a CO followed by protonation gives 3, whereas protonation without insertion gives 4. The X-ray structures of the acryloyl complex [CpMo(η³-COCHCHCO₂Me)(CO)(PPh₂Me)] (3b) and its vinyl isomer [CpMo(σ-CHCHCO₂Me)(CO)₂(PPh₂Me)] (4b) have been determined.     

Chemistry of vinylidene complexes. XX. Intramolecular carbonylation of vinylidene on the MnFe center: Spectroscopic and structural study. X-ray structure of the new trimethylenemethane type MnFe complex

Reactions of Fe₂(CO)₉ with Cp(CO)₂MnCCHPh (1) and Cp(CO)(PPh₃)MnCCHPh (3) gave the heterometallic trimethylenemethane complexes η⁴-{C[Mn(CO)₂Cp](CO)CHPh}Fe(CO)₃ (2) and η⁴-{C[Mn(CO)(PPh₃)Cp](CO)CHPh}Fe(CO)₃ (4), respectively. The formation of the benzylideneketene [PhHCCCO] fragment included in complexes 2 and 4 occurs via intramolecular coupling of the carbonyl and vinylidene ligands. The structures of 3 and 4 were determined by single crystal XRD methods. The influence of the nature of the L ligands at the Mn atom on the structural and spectroscopic characteristics of η⁴-{C[Mn(CO)(L)Cp](CO)CHPh}Fe(CO)₃ (L = CO (2), PPh₃ (4)) is considered. According to the VT ¹H and ¹³C NMR spectra, complex 2 reversibly transforms in solution into μ-η¹:η¹-vinylidene isomer Cp(CO)₂MnFe(μ-CCHPh)(CO)₄ (2a), whereas complex 4 containing the PPh₃ ligand is not able to a similar transformation.     

Dimerisation and reactivity of HCCCCFc at ruthenium centres

In contrast to the simple diynyl complexes formed in reactions between HCCCCFc and MCl(dppe)Cp∗; (M = Fe, Ru), an analogous reaction with RuCl(PPh₃)₂Cp∗; in the presence of KPF₆ and dbu resulted in dimerisation of the diyne at the Ru centre to afford a mixture of [Ru{η¹,η²-C(CCFc)C(L)CHCCCHFc}(PPh₃)Cp∗]PF₆ (L = dbu 1, PPh₃2). Similar reactions with RuCl(PR₃)₂L gave [Ru{η¹,η²-C(CCFc)C(dbu)CHCCCHFc}(PR₃)L]PF₆ (L = Cp, R = Ph 3, m-tol 4; L = η⁵-C₉H₇, R = Ph 5). The reaction between 3 and I₂, followed by crystallization of the paramagnetic product from MeOH, afforded the dicationic [Ru{C(CCFc)C(dbu)CHC(OMe)C(OMe)CHFc}(PPh₃)Cp](I₃)₂6. The molecular structures of 2·2CH₂Cl₂ and 6.S (S = 2CH₂Cl₂, C₆H₆) were determined by single-crystal XRD studies.