The first bidentate phosphanylborohydride: Synthesis, structure, and reactivity towards [CpFe(CO)2I]

Deprotonation of the phosphane-borane adduct rac/meso-(HP(BH₃)(Ph)CH₂)₂ (2) with KH provides facile access to the bidentate phosphanylborohydride rac/meso-K₂[(P(BH₃)(Ph)CH₂)₂] (3). Treatment of 3 with two equivalents of [CpFe(CO)₂I] gives the dinuclear complex rac/meso-[(CpFe(CO)₂)₂-μ-(P(BH₃)(Ph)CH₂)₂] (4). Single crystals of the pure diastereomers meso-2, meso-3(thf)₄, and rac-4 have been grown from toluene/pentane, diethyl ether/thf, and benzene/pentane, respectively. The molecular structures of all three compounds have been determined by X-ray crystallography.     

Facile syntheses, structural characterizations, and isomerization of disiloxane-1,3-diols

In the hydrolysis reaction of dichlorosilanes having an intramolecular coordinating atom, dcisiloxane-1,3-diols, [(OH){o-(CH₃)₂NCH₂-C₆H₄}RSi]₂O(R=CH₂CH (1), C₆H₅ (2), o-(CH₃)₂NCH₂C₆H₄ (3), Me (4)), were obtained in high yields. The results of the crystal structure analyses of meso-2, rac-2a, rac-2b and 3 are reported. They showed strong intramolecular hydrogen bondings between the hydroxy group and the nitrogen atom. We have also found that the diastereomeric isomerization of meso-2 to rac-2 in CDCl₃ solvent containing moisture occurred to result in the 55:45 equilibrium mixtures of the isomers and vice versa.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.     

Palladium-catalyzed asymmetric synthesis of allylic alcohols from unsymmetrical and symmetrical racemic allylic carbonates featuring C-O-bond formation and dynamic kinetic resolution

Described is the asymmetric synthesis of the allylic alcohols 11 (85% ee), 15 (99% ee), 17 (93% ee), 19 (61% ee), and 21 (69% ee) through a Pd-catalyzed reaction of the unsymmetrical carbonates rac-10, rac-12, rac-14, rac-16, rac-18, and rac-20, respectively, with KHCO₃ and H₂O in the presence of bisphosphane 6. Similarly the allylic alcohols 23 (99% ee) and 25 (97% ee) have been obtained from the symmetrical carbonates rac-22 and rac-24, respectively. Reaction of the meso-biscarbonate 26 with H₂O and Pd(0)/6 afforded alcohol 27 (96% ee), which was converted to the PG building block 32. The unsaturated bisphosphane 33 showed in the synthesis of alcohols 36, 37, and 39 a similar high selectivity as 6. The formation of alcohols 11, 15, and 17 involves an efficient dynamic kinetic resolution.     

Synthesis and characterization of Zr(IV) and Y(III) complexes with monocyclopentadienyl ligands containing an additional site tethered by a coordinating 2,6-pyridine bridge. X-ray crystal structures of the zirconium complexes

A new monocyclopentadienyl ligand containing an additional site tethered by a coordinating 2,6-pyridine unit has been prepared, rac-2-(1′-hydroxy-2′,2′-dimethylpropyl)-6-(1″,1″-dimethyl-cyclopentadienylmethyl) pyridine dilithium salt, LLi₂ (rac-4) that is analogous to the ligands present in CGC. After reacting the dilithium salt of the ligand with ZrCl₄ in a molar ratio of 1:1 in THF the complex LZrCl₂·THF (rac-5) was obtained which forms an insoluble oligomeric species after the loss of THF upon purification. From the mater liquor two crystalline species of the formula LHZrCl₃ (rac-6) and LH₂ZrCl₄·THF (rac-7) were isolated, whose X-ray crystal structures are reported. The reaction of LLi₂ with Y(OTf)₃ afforded the probably dimeric species [LYOTf]₂ (rac-8) from which the complex [LY(CH₂Si(CH₃)₃)]₂ (rac-9) was obtained after reaction with LiCH₂Si(CH₃)₃.     

Enantioselective synthesis of axially chiral 1-(1-naphthyl)isoquinolines and 2-(1-naphthyl)pyridines through sulfoxide ligand coupling reactions

Racemic 1-(1′-isoquinolinyl)-2-naphthalenemethanol rac-12 was prepared through a ligand coupling reaction of racemic 1-(tert-butylsulfinyl)isoquinoline rac-7 with the 1-naphthyl Grignard reagent 10. Resolution of rac-12 was achieved through chromatographic separation of the Noe-lactol derivatives 14 and 15, providing (R)-(−)-12 of >99% ee and (S)-(+)-12 of 90% ee. The ligand coupling reaction of optically enriched sulfoxide (S)-(−)-7 (62% ee) with Grignard reagent 10 furnished rac-12, with the absence of stereoinduction resulting from competing rapid racemisation of the sulfoxide 7. Reaction of optically enriched (S)-(−)-7 with 2-methoxy-1-naphthylmagnesium bromide was also accompanied by racemisation of the sulfoxide 7, and furnished optically active (+)-1-(2′-methoxy-1′-naphthyl)isoquinoline (+)-3b in low enantiomeric purity (14% ee). The absolute configuration of (+)-3b was assigned as R using circular dichroism spectroscopy, correcting an earlier assignment based on the Bijvoet method, but in the absence of heavy atoms. Optically active 2-pyridyl sulfoxides were found not to undergo racemisation analogous to the 1-isoquinolinyl sulfoxide 7, with the ligand coupling reactions of (R)-(+)- and (S)-(−)-2-[(4′-methylphenyl)sulfinyl]-3-methylpyridines, (R)-(+)-17 and (S)-(−)-17, with 2-methoxy-1-naphthylmagnesium bromide providing (−)- and (+)-2-(2′-methoxy-1′-naphthyl)-3-methylpyridines, (−)-18 and (+)-18, in 53 and 60% ee, respectively. The free energy barriers to internal rotation in 3b and 18 have been determined, and the isoquinoline (R)-(−)-12 examined as a ligand in the enantioselectively catalysed addition of diethylzinc to benzaldehyde; (R)-(−)-12 was also converted to (R)-(−)-N,N-dimethyl-1-(1′-isoquinolinyl)-2-naphthalenemethanamine (R)-(−)-19, and this examined as a ligand in the enantioselective Pd-catalysed allylic substitution of 1,3-diphenylprop-2-enyl acetate with dimethyl malonate.     

Synthesis of bimodal molecular weight distribution polyethylene with α-diimine nickel(II) complexes containing unsym-substituted aryl groups in the presence of methylaluminoxane

A series of unsymmetrical complexes of 2,3-bis(2-phenylphenyl)-butanediimine nickel(II) dibromide (complex 1), 1,4-bis(2-isopropyl-6-methylphenyl)-acenaphthenediimine nickel(II) dibromide (complex 2) and meso- and rac-1,4-bis (2,4-di-tert-butyl-6-methylphenyl)-acenaphthenediimine nickel(II) dibromide (meso-3 and rac-3) were synthesized and activated by methylaluminoxane (MAO) for ethylene polymerization. By ¹³C NMR characterization, meso- and rac-stereo-isomers were detected in the condensation products resulting from the reaction of unsym-substituted anilines with diketones. It was notable that meso- and rac-isomers in ligand 1 or ligand 2 could not be separated owing to their interconversion, however, meso- and rac-isomers in ligand 3 could be isolated and identified by X-ray diffraction and NMR analysis. At low polymerization temperatures, complex 1/MAO afforded polyethylene with bimodal molecular weight distribution, while complex 2/MAO prepared polyethylene with single-modal distribution. Moreover, by raising polymerization temperature or extending time of catalyst aging, bimodal molecular weight distribution polyethylene was also produced by complex 2/MAO. The hypothesis of bimodal molecular weight distribution polyethylene synthesized by unsymmetrical α-diimine nickel(II) complexes was supported that the molecular weight of polyethylene produced by rac-3/MAO was significantly higher than that produced by meso-3/MAO under identical polymerization conditions. A unique methodology to prepare polyethylene with bimodal molecular weight distribution was demonstrated.     

Polymerization of ethene with zirconocene catalysts: an experimental and quantum chemical study of the influence of para-substituent in benzyl in bis{η-(1-benzyl)indenyl}zirconium dichlorides

The meso- and rac-like isomers of bis{η⁵-(1-benzyl)indenyl}zirconium dichloride (5), bis{η⁵-(1-para-methoxybenzyl)indenyl}zirconium dichloride (6), bis{η⁵-(1-para-fluoro-benzyl)indenyl}zirconium dichloride (7) and bis{η⁵-(1-phenylethyl)indenyl}zirconium dichloride (8) were synthesized and isolated. Solid-state structures of meso- and rac-like 5 were determined by X-ray structure analysis. Polymerization properties of the methylaluminoxane (MAO) activated diastereomers of complexes 5-8 were studied in ethene polymerizations under different monomer concentrations. The rac-like isomer of 1-phenylethyl-substituted 8/MAO showed significantly higher activity than the 1-benzyl substituted analogs 5-7/MAO. In addition, rac-8/MAO behaves like a single center catalyst producing polyethene with narrow molar mass distribution (1.8-1.9), while diastereomers of 5-7/MAO produce polymers with molar mass distributions varying from 2.7 up to 10.3. The rac and meso-like isomers of 5-7/MAO have different response on the monomer concentration. Quantum chemical calculations suggest a strong interaction between the benzyl substituent and the electron deficient zirconium center. The phenyl metal coordination energies depend on the electronic properties of the para-substituent. In 8/MAO, due to the ethyl spacer, the coordination does not have a significant role and therefore much higher activity and single center polymerization behavior is observed.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

Synthesis, structures and rac/meso isomerization behaviour of bisplanar chiral bis(phosphino-η-indenyl)iron(II) complexes

Syntheses of the phosphinoindenes 1-(diphenylphosphino)-3-methylindene (1b), 3-(diphenylphosphino)-2-methylindene (1c), 1-(diphenylphosphino)-2,3-dimethylindene (1d), 4,7-dimethyl-3-(diphenylphosphino)indene (1e), 1-(diphenylphosphino)-3,4,7-trimethylindene (1f) and 3-(diisopropylphosphino)indene (1i) were carried out by treatment of the appropriate indenide with the appropriate chlorophosphine. The silylphosphinoindene 3-(diphenylphosphino)-1-(trimethylsilyl)indene (1h) was prepared by treatment of the indenide of 3-(diphenylphosphino)indene (1a) with trimethylsilylchloride. These indenes, in addition to 1a, were then used, after deprotonation with BuLi, to prepare the corresponding indenyl ferrocenes, 2a-2e, 2h and 2i, by treatment with ferrous chloride in a 2:1 ratio. These compounds were characterized by ¹H, ¹³C, and ³¹P NMR spectroscopy, as well as by mass spectrometry, except for the highly-sensitive diisopropylphosphine 2i that could only be characterized by ³¹P NMR spectroscopy. All of these ferrocene complexes are bisplanar chiral systems that can potentially form rac and meso isomers. In all cases both isomers were observed but for 2b and 2h only one could be isolated. The rac isomers of complexes 2a, 2b, 2d, and 2e, as well as the meso isomer of 2e, were studied by X-ray crystallography. Only complexes 2a and 2i were observed to undergo rac/meso isomerization processes at ambient temperature in THF solvent. We were unable to prepare the sterically congested hexamethylferrocene 2f. Generally, it was found that increasing substitution on the indenyl ring increases the reactivity and sensitivity of the ferrocene.     

Synthesis, crystal structure analysis, and pharmacological characterization of desmethoxy-sila-venlafaxine, a derivative of the serotonin/noradrenaline reuptake inhibitor sila-venlafaxine

rac-Desmethoxy-sila-venlafaxine (rac-3) is a derivative of the noradrenaline-selective serotonin/noradrenaline reuptake inhibitor rac-sila-venlafaxine (rac-1b), a silicon analogue of the serotonin-selective serotonin/noradrenaline reuptake inhibitor rac-venlafaxine (rac-1a) (rac-1a, rac-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl]cyclohexan-1-ol; rac-1b, rac-1-[2-(dimethylamino)-1-(4-methoxyphenyl)ethyl]-1-silacyclohexan-1-ol). The synthesis and crystal structure analyses of rac-3 and rac-3 · HCl are reported, and the pharmacological properties of rac-1a, rac-1b, rac-2 (a sila-venlafaxine derivative with a silacyclopentanol skeleton instead of a silacyclohexanol framework), and rac-3 are compared (comparison of the pharmacological selectivity profiles with respect to serotonin, noradrenaline, and dopamine reuptake inhibition).     

Adamantane-retropeptides, new building blocks for molecular channels

Novel adamantane-oxalamide derivatives, N,N′-bis(1-adamantylglycine methyl ester)oxalamide (meso-1 and rac-1), N,N′-bis(3-aminoadamantane-1-carboxylic acid methyl ester)oxalamide (2) and N,N′-bis(3-aminoadamantane-1-carboxylic acid)oxalamide (3) were prepared and structurally characterized by spectroscopic methods and X-ray analysis. Crystal packing of the structures meso-1 and rac-1 is defined by one-dimensional α-networks of hydrogen-bonded chains. The crystal structures of 2 and 3 are characterized by two-dimensional β-networks of hydrogen bonds. The oxalamide 3 crystallizes as the solvates only. In the crystal structure of 3 the protic solvent participates in hydrogen bonding with the oxalamide moieties. However, in non-protic solvents 3 crystallizes as a solvate but the solvent does not participate in hydrogen bonding. The two-dimensional network of hydrogen bonds connecting molecules of 3 generates channels, which are filled by discrete solvent molecules.     

Aminobis(phenolate)s of imidomolybdenum(VI) and -tungsten(VI)

The reactions of trans-[MoO(ONO^Me)Cl₂] 1 (ONO^Me = methylamino-N,N-bis(2-methylene-4,6-dimethylphenolate) dianion) and trans-[MoO(ONO^tBu)Cl₂] 2 (ONO^tBu = methylamino-N,N-bis(2-methylene-4-methyl-6-tert-butylphenolate) dianion) with PhNCO afforded new imido molybdenum complexes trans-[Mo(NPh)(ONO^Me)Cl₂] 3 and trans-[Mo(NPh)(ONO^tBu)Cl₂] 4, respectively. As analogous oxotungsten starting materials did not show similar reactivity, corresponding imido tungsten complexes were prepared by the reaction between [W(NPh)Cl₄] with aminobis(phenol)s. These reactions yielded cis- and trans-isomers of dichloro complexes [W(NPh)(ONO^Me)Cl₂] 5 and [W(NPh)(ONO^tBu)Cl₂] 6, respectively. The molecular structures of 4, cis-6 and trans-6 were verified by X-ray crystallography. Organosubstituted imido tungsten(VI) complex cis-[W(NPh)(ONO^tBu)Me₂] 7 was prepared by the transmetallation reaction of 6 (either cis or trans isomer) with methyl magnesium iodide.     

Synthesis and molecular structures of dinuclear complexes with 1,2-dihydro-1,2-diphenyl-naphtho[1,8-c,d]1,2-diphosphole as a bridging ligand

A bisphosphine in which a PhP-PPh bond bridges 1,8-positions of naphthalene, 1,2-dihydro-1,2-diphenyl-naphtho[1,8-cd]-1,2-diphosphole (1), was used as a bridging ligand for the preparation of dinuclear group 6 metal complexes. Free trans-1, a more stable isomer having two phenyl groups on phosphorus centers mutually trans with respect to a naphthalene plane, was allowed to react with two equivalents of M(CO)₅(thf) (M = W, Mo, Cr) at room temperature to give dinuclear complexes (OC)₅M(μ-trans-1)M(CO)₅ (M = W (2a), Mo (2b), Cr (2c)). The preparation of the corresponding dinuclear complexes bridged by the cis isomer of 1 was also carried out starting from the free trans-1 in the following way. Mono-nuclear complexes M(trans-1)(CO)₅ (M = W (3a), Mo (3b), Cr (3c)) which had been prepared by a reaction of trans-1 with one equivalent of the corresponding M(CO)₅(thf) (M = W, Mo, Cr) complex, were heated in toluene, wherein a part of the trans-3a-c was converted to their respective cis isomer M(cis-1)(CO)₅. Each cis trans mixture of the mono-nuclear complexes 3a-c was treated with the corresponding M(CO)₅(thf) to give a cis trans mixture of the respective dinuclear complexes 2a-c. The cis isomer of the ditungsten complex 2a was isolated, and its molecular structure was confirmed by X-ray analysis, showing a shorter W?W distance of 5.1661(3) Å than that of 5.8317(2) Å in trans-2a.     

Stereoisomeric bis(phenylglycinol)malonamide gelators: rare examples of gelling meso-compounds

Gelation of malonamides was investigated for the first time. Bis(phenylglycinol)malonamide 1, and methyl-, dimethyl-, ethyl-, diethyl- and isopropylmalonamides 2, 3, 4, 5 and 6, respectively, exhibited profoundly different gelling properties. Monoalkyl malonamides are efficient organogelators, and their gelling properties strongly depend on their stereochemistry. In contrast, symmetrically substituted dialkymalonamides, that is, (R,R)-dimethylmalonamide 3 and (R,R)-diethylmalonamide 5 as well as the unsubstituted 1 lack any gelation ability. Methyl derivative (R,R)-2 is an excellent, and its ethyl analogue (R,R)-4 a moderate gelator of toluene, p-xylene and tetralin while the isopropyl derivative (R,R)-6 shows only very weak gelation of tetralin and some more polar solvents. Meso diastereoisomers (R,r,S)-2 and (R,s,S)-2, as well as (R,r,S)-4 and (R,s,S)-4), each possessing a pseudoasymmetric centre represent very rare examples of gelling meso-compounds. The racemate 4 (rac-4) showed more efficient gelation of some solvents than the pure enantiomer (R,R)-4, while rac-2 failed to gel any of the solvents which were efficiently gelled by (R,R)-2.     

Iron(0) and ruthenium(0) complexes with tridentate phosphonite ligands and their potential for ketene formation from methyl iodide, CO and a base

An efficient route to the novel tridentate phosphine ligands RP[CH₂CH₂CH₂P(OR′)₂]₂ (I: R = Ph; R′ = i-Pr; II: R = Cy; R′ = i-Pr; III: R = Ph; R′ = Me and IV: R = Cy; R′ = Me) has been developed. The corresponding ruthenium and iron dicarbonyl complexes M(triphos)(CO)₂ (1: M = Ru; triphos = I; 2: M = Ru; triphos = II; 3: M = Ru; triphos = III; 4: M = Ru; triphos = IV; 5: M = Fe; triphos = I; 6: M = Fe; triphos = II; 7: M = Fe; triphos = III and 8: M = Fe; triphos = IV) have been prepared and fully characterized. The structures of 1, 3 and 5 have been established by X-ray diffraction studies. The oxidative addition of MeI to 1-8 produces a mixture of the corresponding isomeric octahedral cationic complexes mer,trans-(13a-20a) and mer,cis-[M(Me)(triphos)(CO)₂]I (13b-20b) (M = Ru, Fe; triphos = I-IV). The structures of 13a and 20a (as the tetraphenylborate salt (21)) have been verified by X-ray diffraction studies. The oxidative addition of other alkyl iodides (EtI, i-PrI and n-PrI) to 1-8 did not afford the corresponding alkyl metal complexes and rather the cationic octahedral iodo complexes mer,cis-[M(I)(triphos)(CO)₂]I (22-29) (M = Ru, Fe; triphos = I-IV) were produced. Complexes 22-29 could also be obtained by the addition of a stoichiometric amount of I₂ to 1-8. The structure of 22 has been verified by an X-ray diffraction study. Reaction of 13a/b-20a/b with CO afforded the acetyl complexes mer,trans-[M(COMe)(triphos)(CO)₂]I, 30-37, respectively (M = Ru, Fe; triphos = I-IV). The ruthenium acetyl complexes 30-33 reacted slowly with 2-tert-butylimino-2-diethylamino-1,3-dimethylperhydro-1,3,2-diazaphosphorine (BEMP) even in boiling acetonitrile. Under the same conditions, the deprotonation reactions of the iron acetyl complexes 34-37 were completed within 24-40 h to afford the corresponding zero valent complexes 5-8. It was not possible to observe the intermediate ketene complexes. Tracing of the released ketene was attempted by deprotonation studies on the labelled species mer,trans-[Fe(COCD₃)(triphos)(CO)₂]I (38) and mer,trans-[Fe(¹³COMe)(triphos)(CO)₂]I (39).     

Synthesis and characterization of some novel ruthenium(II) complexes containing thiolate ligands

Reactions of the ruthenium complexes [RuH(CO)Cl(PPh₃)₃] and [RuCl₂(PPh₃)₃] with hetero-difunctional S,N-donor ligands 2-mercapto-5-methyl-1,3,5-thiadiazole (HL¹), 2-mercapto-4-methyl-5-thiazoleacetic acid (HL²), and 2-mercaptobenzothiazole (HL³) have been investigated. Neutral complexes [RuCl(CO)(PPh₃)₂(HL¹)] (1), [RuCl(CO)(PPh₃)₂(HL²)] (2), [RuCl(CO)(PPh₃)₂(HL³)] (3), [Ru(PPh₃)₂(HL¹)₂] (4), [RuCl(PPh₃)₃(HL²)] (5), and [RuCl(PPh₃)₃(HL³)] (6) imparting κ²-S,N-bonded ligands have been isolated from these reactions. Complexes 1 and 4 reacted with diphenyl-2-pyridylphosphine (PPh₂Py) to give neutral κ¹-P bonded complexes [RuCl(CO)(κ¹-P-PPh₂Py)₂(HL¹)] (7), and [Ru(κ¹-P-PPh₂Py)₂(HL¹)₂] (8). Complexes 1-8 have been characterized by analytical, spectral (IR, NMR, and electronic absorption) and electrochemical studies. Molecular structures of 1, 2, 4, and 7 have been determined crystallographically. Crystal structure determination revealed coordination of the mercapto-thiadiazole ligands (HL¹-HL³) to ruthenium as κ²-N,S-thiolates and presence of rare intermolecular S-S weak bonding interaction in complex 1.     

The diastereoisomeric forms of a mononuclear Ru(II) complex bearing a bis-phenanthroline Tröger’s base

The synthesis of a novel completely asymmetric mononuclear complex of ruthenium(II) bearing a chiral bis-phenanthroline Tröger’s base ligand 1 (TBphen₂) is reported. The diastereoisomeric forms of [Ru(phen)₂TBphen₂]²⁺ (ΔS/ΛR=rac-2a and ΛS/ΔR=rac-2b) were separated through crystallization. A complete structure elucidation of the diastereoisomers in solution, including chirality assignment, was achieved by 1D and 2D NMR techniques. Photophysical characterization revealed no significant differences in the emission properties of rac-2a and rac-2b that closely resemble those of [Ru(phen)₃]²⁺.     

Evaluation of two chelators for labelling a PNA monomer with the fac-[Tc(CO)3] moiety

A PNA monomer containing thymine as nucleobase (1) was synthesized, characterized and coupled to the pyrazolyl containing ligand 3,5-Me₂pz(CH₂)₂N((CH₂)₃COOH)(CH₂)₂NHBoc (2) and to a modified cysteine S-(carboxymethyl-pentafluorphenyl)-N-[(trifluor)carbonyl]-l-cysteine methyl ester (3) yielding the bifunctional chelators 6 and 7, respectively. Reactions of 6 and 7 with the Re(I) tricarbonyl starting material [Re(CO)₃(H₂O)₃]Br afforded the complexes fac-[Re(CO)₃(κ³-6)]⁺ (8) and fac-[Re(CO)₃(κ³-7)] (9), respectively. The identity of 8 and 9 has been established based on IR spectroscopy, elemental analysis, ESI-MS spectrometry and HPLC. The multinuclear NMR spectroscopy (¹H, ¹³C, g-COSY, g-HSQC) has also been very informative in the case of complex 8, showing the presence of rotamers in solution. For 9 the NMR spectrum was too complex due to the presence of rotamers and diastereoisomers. The radioactive congeners of complexes 8 and 9, fac-[^99mTc(CO)₃(κ³-6)]⁺ (8a) and fac-[^99mTc(CO)³(κ³-7)] (9a), have been prepared by reacting the precursor fac-[^99mTc(CO)₃(H₂O)₃]⁺ with the corresponding ligands being their identity established by comparing their HPLC chromatograms with the HPLC of the rhenium surrogates.     

Synthesis and evaluation of new chiral diols based on the dicyclopentadiene skeleton

The resolution by Lipase PS of rac-5 (from reduction of ketone 6, obtained from dicyclopentadiene with a new environment-friendly synthesis) gives (2S)-5, which was further reduced to the endo(2R)-1a alcohol. The endo(2S)-1b alcohol was obtained from camphor with a multistep synthesis. Pinacol couplings of 3a,b, carried out with Mg/Hg or Corey's general procedure respectively, afforded with high diastereoselectivity the C₂ symmetry diols (2R,2′R)-2a and (2S,2′S)-2b, with endo oriented OH functions. The enantiogenic power of the endo alcohol (2R)-1a and (2S)-1b and of the diols (2R,2′R)-2a and (2S,2′S)-2b was tested towards the LiAlH₄ reduction of acetophenone. The C₂ symmetry appears to play a fundamental role.