Na+-ion conductivity of double phosphate Na3Sc2(PO4)3 in the region of the β-γ transition

The Na⁺-ion conductivity σ of double phosphate Na₃Sc₂(PO₄)₃ in the region of the β-γ transition has been studied using impedance spectroscopy (1–10⁶ Hz). The polycrystalline sample of Na₃Sc₂(PO₄)₃ has been prepared by solid-phase synthesis and ceramic technology. It has been found that, upon the β-γ transition, the conductivity σ of Na₃Sc₂(PO₄)₃ suffers a ～1.5-fold jump at 470 ± 2 K upon heating and a ～2.5-fold jump at 430 ± 4 K upon cooling (the temperature hysteresis of the jump in σ is 40 K). For double sodium-scandium phosphate γ-Na₃Sc₂(PO₄)₃ in the superionic state, σ attains 0.07 S/cm at 700 K and the ion transport activation enthalpy is 0.42 ± 0.02 eV.     

Preparation and characterization of biodegradable poly(ε-caprolactone)-based gel polymer electrolyte films

Biodegradable polymer electrolyte films based on poly(ε-caprolactone) (PCL) in conjunction with lithium tetrafluoroborate (LiBF₄) salt and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄) ionic liquid were prepared by solution cast technique. The structural, morphological, thermal, and electrical properties of these films were examined using X-ray diffraction (XRD), optical microscopy (OM), differential scanning calorimetry (DSC), and impedance spectroscopy. The XRD and OM results reveal that the pure PCL possesses a semi-crystalline nature and its degree of crystallinity decreases with the addition of LiBF₄ salt and EMIMBF₄ ionic liquid. DSC analysis indicates that the melting temperature and enthalpy are apparently lower for the 40 wt% EMIMBF₄ gel polymer electrolyte as compared with the others. The ambient temperature electrical conductivity increases with increasing EMIMBF₄ concentration and reaches a high value of ～2.83?×?10^?4 S cm^?1 for the 85 PCL:15 LiBF₄ + 40 wt% EMIMBF₄ gel polymer electrolyte. The dielectric constant and ionic conductivity follow the same trend with increasing EMIMBF₄ concentration. The dominant conducting species in the 40 wt% EMIMBF₄ gel polymer electrolyte determined by Wagner’s polarization technique are ions. The ionic conductivity of this polymer electrolyte (～2.83?×?10^?4 S cm^?1) should be high enough for practical applications.     

Ionic conductivity and crystal structure for the Li3−2xCr2−xTax(PO4)3 system

The monoclinic phase (P2₁/n) was formed for 0≤x≤0.6 and the NASICON-type rhombohedral phase (R3̄c) was obtained for the region 0.8≤x≤1.2 in the Li_3−2xCr_2−xTa_x(PO₄)₃ system. The activation energy for Li⁺ migration was ca. 0.45 eV for the monoclinic structure and ca. 0.36 eV for the rhombohedral structure. The maximum conductivity of 8.4×10⁻⁶ S cm⁻¹ at 298 K was obtained for x=0.8 of the Li_3−2xCr_2−xTa_x(PO₄)₃ system. The conductivity of LiCrTa(PO₄)₃ was enhanced about three to five times by the addition of the lithium salt due to the improvement of the sinterablity. The maximum conductivity was 2.4×10⁻⁵ S cm⁻¹ at 298 K for LiCrTa(PO₄)₃–0.2Li₃BO₃.     

Electric and electrochemical properties of solid LiH2PO4

Electrical and electrochemical properties of solid LiH₂PO₄ conductor were investigated in the temperature range from room temperature to 373 K. It was found that high conductivity throughout the temperature range, with activation energy 17.23 kJ/mol, originates from the movement of hydrogen ions (protons). The movement of protons in the correlation with phosphate groups rotation was considered. The slopes of Tafel lines and exchange current densities both for cathodic hydrogen and anodic oxygen evolution were determined (by means of usual electrochemical kinetic methods) at various temperatures. The energy of activation at the equilibrium potentials both for the cathodic and the anodic processes have been assessed to be 17.23 kJ/mol (0.18 eV) and 2.9 kJ/mol (0.03 eV), respectively.     

Studies on structural and electrical properties of Mg<Subscript>0. 5+y</Subscript> (Zr<Subscript>2-y</Subscript>Fe<Subscript>y</Subscript>) <Subscript>2</Subscript> (PO<Subscript>4</Subscript>) <Subscript>3</Subscript> ceramic electrolytes

The sample of Mg_{0. 5+y} (Zr_1-y Fe_y) ₂ (PO₄) ₃ (0.0 ≤y ≤0.5) was synthesized using the sol-gel method. The structures of the samples were investigated using X-ray diffraction and Fourier transform infrared spectroscopy measurement. XRD studies showed that samples had a monoclinic structure which was iso-structured with the parent compound, Mg_0.5Zr (PO₄) ₃. The complex impedance spectroscopy was carried out in the frequency range 1–6 MHz and temperature range 303 to 773 K to study the electrical properties of the electrolytes. The substitutions of Fe³⁺ with Zr⁴⁺ in the Mg_0.5Zr (PO₄) ₃ structure was introduced as an extrainterstitial Mg²⁺ ion in the modified structured. The compound of Mg_0.5+y (Zr_1-y Fe_y)₂(PO₄)₃ with y?=?0.4 gives a maximum conductivity value of 1.25?×?10^?5 S cm^?1 at room temperature and 7.18?×?10^?5 S cm^?1 at 773 K. Charge carrier concentration, mobile ion concentration, and ion hopping rate are calculated by fitting the conductance spectra to power law variation, σ _ac (ω)?=?σ _o ? +?Aω ^α . The charge carrier concentration and mobile ion concentration increases with increase of Fe³⁺ inclusion. This implies the increase in conductivity of the compounds was due to extra interstitial Mg²⁺ ions.     

EPR study of the symmetry breaking effect in ferroelectric cesium dihydrogen phosphate doped with Cr5+ ions

The (PO₄)^3? units in a CsH₂PO₄ (CDP) crystal were replaced in a small fraction of sites by (CrO₄)^3? groups and the EPR of the Cr⁵⁺ center was investigated. Splitting of the EPR line appears at T¹_c=245 K, 91 K higher that the ferroelectric transition temperature T_c=154 K. The electronic wave function of Cr⁵⁺ (3d¹) is identified as d_x2_?y2. The d_x2_?y2 function couples with the near protons and the reorientation of this unit in the two possible configurations occurs in the paraelectric phase and breaks the symmetry far above T_c. The observed correlation time 10^?9 sec and associated activation energy ΔU=0.215 eV are discussed.     

Crystal structure analysis of Li<Subscript>3</Subscript>PO<Subscript>4</Subscript> powder prepared by wet chemical reaction and solid-state reaction by using X-ray diffraction (XRD)

Lithium phosphate (Li₃PO₄) is one of the promising solid electrolyte materials for lithium-ion battery because of its high ionic conductivity. A crystalline form of Li₃PO₄ had been prepared by two different methods. The first method was wet chemical reaction between LiOH and H₃PO₄, and the second method was solid-state reaction between Li₂O and P₂O₅. Crystal structure of Li₃PO₄ white powder had been investigated by using an X-ray diffraction (XRD) analysis. The results show that Li₃PO₄ prepared by wet chemical reaction belongs to orthorhombic unit cell of β-Li₃PO₄ with space group Pmn2₁. Meanwhile, Li₃PO₄ powder prepared by solid-state reaction belongs to orthorhombic unit cell of γ-Li₃PO₄ with space group Pmnb and another unknown phase of Li₄P₂O₇. The impurity of Li₄P₂O₇ was due to phase transformation in solid state reaction during quenching of molten mixture from high temperature. Ionic conductivity of Li₃PO₄ prepared by solid-state reaction was ～3.10^?7 S/cm, which was higher than Li₃PO₄ prepared by wet chemical reaction ～4.10^?8 S/cm. This increasing ionic conductivity may due to mixed crystal structures that increased Li-ion mobility in Li₃PO₄.     

Dielectric and conduction mechanism studies of PVA-orthophosphoric acid polymer electrolyte

Polyvinyl alcohol (PVA)-based proton conducting polymer electrolytes have been prepared by the solution cast technique. The conductivity is observed to increase from 10⁻⁹ to 10⁻⁴ S cm⁻¹ as a result of orthophosphoric acid (H₃PO₄) addition. The plot of conductivity vs temperature shows that a phase transition occurred at 343 K in the sample PVA-33 wt% H₃PO₄. The β-relaxation peak is observed at 313 K. The glass transition temperature of PVA-33 wt% H₃PO₄ is 343 K. Orthophosphoric acid seems to play a dual role, i.e., as a proton source and as a plasticizer. The ac conductivity σ _ac = Aω ^s was also calculated in the temperature range from 303 to 353 K. The conduction mechanism was inferred by plotting the graph of s vs T from which the conduction mechanism for sample PVA-17 wt% H₃PO₄ was inferred to occur by way of the overlapping large polaron tunneling (OLPT) model and the conduction mechanism for the sample PVA-33 wt% H₃PO₄ by way of the correlated barrier height (CBH) model.     

Proton conductivity of Al(H2PO4)3–H3PO4 composites at intermediate temperature

Composites of Al(H₂PO₄)₃ and H₃PO₄ were synthesised by soft chemical methods with different Al/P ratios. The Al(H₂PO₄)₃ obtained was found to have a hexagonal symmetry with parameter a = 13.687(3)Å, c = 9.1328(1)Å. The conductivity of this material was measured by a.c. impedance spectroscopy between 100 °C and 200 °C in different atmospheres. The conductivity of pure Al(H₂PO₄)₃ in air is in the order of 10^? 6–10^? 7 S/cm between 100 and 200 °C. For samples containing small excess of H₃PO₄, much higher conductivity was observed. The impedance responses of the composites were found to be similar with AlH₂P₃O₁₀·nH₂O under different relative humidity. The conductivity of Al(H₂PO₄)₃–H₃PO₄ composite with Al/P = 1/3.5 reached 6.6 mS/cm at 200 °C in wet 5% H₂. The extra acid is found to play a key role in enhancing the conductivity of Al(H₂PO₄)₃–H₃PO₄ composite at the surface region of the Al(H₂PO₄)₃ in a core shell type behaviour. 0.7% excess of H₃PO₄ can increase the conductivity by three orders of magnitude. These composites might be alternative electrolytes for intermediate temperature fuel cells and other electrochemical devices. Conductivity (9.5 mS/cm) changed little, when the sample was held at 175 °C for over 100 h as the conductivity stabilised.     

Specific features of the pyroelectric properties of actual RbTiOPO4 single crystals in the temperature range 4.2–300 K

The pyroelectric properties of samples cut from various growth sectors of RbTiOPO₄ single crystals grown from solution in a melt were measured in the temperature range from 4.2 to 300 K. The experimental values of the pyroelectric coefficient range from ?1.3 × 10^?5 to ?4.6 × 10^?5 C/m² K. For the samples cut from the (100) sector, pronounced anomalies were revealed at 85 and 275 K, which, in our opinion, can be due to the contribution of associates formed by the coordination tetrahedra PO₄(1) and PO₄(2) and interstitial rubidium Rb _i . At T > 280 K, superionic conductivity begins to manifest itself in all of the samples studied, which indicates the decomposition of the dipole complexes with increasing temperature. From the measured pyroelectric coefficient and birefringence along the polar direction, the spontaneous polarization of rubidium titanyl is calculated to be 0.5 C/m² at 250 K, which is comparable in magnitude to that of lithium tantalate.     

Superionic phase transition in (NH4)2SeO4·2NH4HSeO4 single crystal at 378 K

Abstract

DTA, structural and electric conductivity investigations were made for (NH₄)₄H₂(SeO₄)₃ single crystals. A high-temperature phase transition at 378 K to a superionic phase was found. The phase is characterized by a high electrical conductivity (～4.10^?3 Ω^?1 cm^?1) and a low activation energy (0.11 eV).     

CeAlO<Subscript>3</Subscript> crystals: Preparation and study of their electrical and optical characteristics

Crystals of cerium aluminate with perovskite structure were obtained using the cold-crucible technique. The electrical and optical properties of cerium aluminate were studied in air in the range 300–1300 K. The main characteristics of CeAlO₃ at T=300 K are a follows: electrical conductivity σ=10^?7 S/cm, dielectric permittivity ?=3000–10000 (both measured at a frequency of 1000 Hz), thermal band-gap width ΔE=2.3±0.5 eV, and optical width δE=2.65±0.25 eV, which decreases at a rate of ?0.62×10^?3 eV/K with increasing temperature in the 300-to 1500-K interval.     

Impedance spectroscopy studies of poly (methyl methacrylate)-lithium salts polymer electrolyte systems

In the present work, five systems of samples have been prepared by the solution casting technique. These are the plasticized poly(methyl methacrylate) (PMMA-EC) system, the LiCF₃SO₃ salted-poly(methyl methacrylate) (PMMA-LiCF₃SO₃) system, the LiBF₄ salted-poly(methyl methacrylate) (PMMA-LiBF₄) system, the LiCF₃SO₃ salted-poly(methyl methacrylate) containing a fixed amount of plasticizer ([PMMA-EC]-LiCF₃SO₃) system, and the LiBF₄ salted-poly(methyl methacrylate) containing a fixed amount of plasticizer ([PMMA-EC]-LiBF₄) system. The conductivities of the films from each system are characterized by impedance spectroscopy. The room temperature conductivity in the pure PMMA sample and (PMMA-EC) system is 8.57 × 10⁻¹³ and 2.71 × 10⁻¹¹ S cm⁻¹, respectively. The room conductivity for the highest conducting sample in the (PMMA-LiCF₃SO₃), (PMMA-LiBF₄), ([PMMA-EC]-LiCF₃SO₃), and ([PMMA-EC]-LiBF₄) systems is 3.97 × 10⁻⁶, 3.66 × 10⁻⁷, 3.40 × 10⁻⁵, and 4.07 × 10⁻⁷ S cm⁻¹, respectively. The increase in conductivity is due to the increase in number of mobile ions, and decrease in conductivity is attributed to ion association. The increase and decrease in the number of ions can be implied from the dielectric constant, ɛ_r-frequency plots. The conductivity–temperature studies are carried out in the temperature range between 303 and 373 K. The results show that the conductivity is increased when the temperature is increased and obeys Arrhenius rule. The plots of loss tangent against temperature at a fixed frequency have showed a peak at 333 K for the ([PMMA-EC]-LiBF₄) system and a peak at 363 K for the ([PMM-EC]-LiCF₃SO₃) system. This peak could be attributed to β-relaxation, as the measurements were not carried out up to glass transition temperature, T _g. It may be inferred that the plasticizer EC has dissociated more LiCF₃SO₃ than LiBF₄ and shifted the loss tangent peak to a higher temperature. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006     

Synthesis, crystal structure, and spectroscopic study of K0.92(2) Zn0.08(2) H1.92(2) (PO4) (Zn-KDP)

The structure of K0.92₍₂₎ Zn_0.08(2) H_1.92(2) (PO₄) was determined using single-crystal X-ray diffraction. The crystal structure of the Zn-KDP belonged to the tetragonal space group $ \mathrm{I}\overline{4}2\mathrm{d} $ , with cell parameters of a?=?b?=?7.4487(5)?Å and c?=?6.9703(5)?Å, 386.73(5) Å3, Z?=?4, and R?=?0.023. Zn²⁺ ions were used as substitutes for K⁺ ions with hydrogen vacancy. The Zn-KDP single crystals were submitted to further Raman, infrared, and ¹H NMR studies to investigate chemical group functionalisation, possible bonding between the organic and inorganic materials, and partial substitution of K⁺ by Zn²⁺. The latter partial substitution was confirmed by the deviation of IR frequencies for O–H stretching, the variation of IR and Raman frequencies for stretching and bending vibrations ν(PO₄) of H₂PO₄, and the appearance of additional Raman (147, 386 and 481 cm^?1) vibrational bands. Electrical conductivity measurements were performed on polycrystalline pellets of Zn-KDP and pure KDP at room temperatures (RT) of up to 473K. In both cases, a conductivity jump close to 453K was observed, and a stronger increase of conductivity was measured.     

Preparation,structural characterization and conductivity of LiZr2(PO4)3

Amorphous LiZr₂(PO₄)₃ has been prepared at room temperature starting from aqueous solutions of ZrOCl₂, H₃PO₄, and LiOH and then crystallized by heating at temperatures between 600 and 900°C. The material obtained at 900°C has been characterized by X-ray powder diffractometry, DSC analysis, and ac conductivity. It is monoclinic from 20 up to about 300°C and orthorhombic at higher temperatures. A change in the activation energy for conduction (from 0.79 to 0.43 eV) and a weak endothermic effect (0.9–1.7 cal/g) are associated with the phase transition. The ac conductivity of sintered pellets is, on average, 7×10⁻⁴ S cm⁻¹ at 300°C.     

Electrical conductivity relaxation in PVOH+LiH2PO4+Al2O3 polymer composites

Low-frequency conductivity measurements have been performed in solid polymer electrolyte composites based on the anhydrous PVOH–LiH₂PO₄–Al₂O₃ system. A typical power law dependency in the real part of the conductivity, at higher frequencies, of the form ω ⁿ is observed, with an exponent n that depends on the alumina content and nearly independent of temperature. An analysis of the frequency dependence of the electrical susceptibility is conducted to obtain relaxation functions of the form exp[?(t/τ) ^β ], with an exponent β?≈?n???1. Correlation times, τ, and parameters characterizing the electrical relaxation in time and frequency domains are compared to show the equivalence of these representations. The anhydrous dc conductivity of the electrolytes increases with increasing lithium salt content, becoming of the order of 10^?5 S/cm for a salt molar fraction of x?=?0.14. This conductivity value increased by about one order of magnitude by addition of nanoporous particles of Al₂O₃. The temperature dependence of the samples conductivity was well described by the Vogel–Tammann–Fulcher’s equation indicating the effect of the polymer chains flexibility on ion migration. Although all membranes exhibited a “universal dynamic response” associated to the random hopping of the mobile carriers, variations in the measured relaxation parameters with alumina content indicate an increase of ionic correlations when adding the nonporous particles to the polyelectrolyte.     

Characteristics of the Li<Superscript>+</Superscript>-Ion Conductivity of Li<Subscript>3</Subscript>R<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> Crystals (R = Fe,Sc) in the Superionic State

The characteristics of Li+-ion conductivity σdc of structural γ modifications of Li₃R₂(PO₄)₃ compounds (R = Fe, Sc) existing in the superionic state have been investigated by impedance spectroscopy. The type of structural framework [R₂P₃O₁₂]_∞^3- affects the σdc value and the σdc activation enthalpy in these compounds. The ion transport activation enthalpy in γ-Li₃R₂(PO₄)₃ (ΔH_σ = 0.31 ± 0.03 eV) is lower than in γ-Li₃Fe₂(PO₄)₃ (ΔH_σ = 0.36 ± 0.03 eV). The conductivity of γ-Li₃Fe₂(PO₄)₃ (σ_dc = 0.02 S/cm at 573 K) is twice as high as that of γ-Li₃R₂(PO₄)₃. A decrease in temperature causes a structural transformation of Li₃R₂(PO₄)₃ from the superionic γ modification (space group Pcan) through the intermediate metastable β modification (space group P2₁/n) into the “dielectric” α modification (space group P2₁/n). Upon cooling, σdc for both phosphates decreases by a factor of about 100 at the superionic TSIC transition. In Li₃Fe₂(PO₄)₃ σdc gradually decreases in the temperature range T_SIC = 430–540 K, whereas in Li₃R₂(PO₄)₃ σdc undergoes a jump at T_SIC = 540 ± 25 K. Possible crystallochemical factors responsible for the difference in the σdc and ΔH_σ values and the thermodynamics and kinetics of the superionic transition for Li₃R₂(PO₄)₃ are discussed.     

Lattice thermal conductivity of compounds with inhomogeneous intermediate rare-earth ion valence

The thermal conductivity κ (within the range 4–300 K) and electrical conductivity σ (from 80 to 300 K) of polycrystalline Sm₃S₄ with the lattice parameter a=8.505 Å (with a slight off-stoichiometry toward Sm₂S₃) are measured. For T>95 K, charge transfer is shown to occur, as in stoichiometric Sm₃S₄ samples, by the hopping mechanism (σ ～ exp(?ΔE/kT) with ΔE ～ 0.13 eV). At low temperatures [up to the maximum in the lattice thermal conductivity κ_ph(T)], κ_ph ～ T ^2.6; in the range 20–50 K, κ_ph ～ T ^?1.2; and for T>95 K, where the hopping charge-transfer mechanism sets in, κ_ph ～ T ^?0.3 and a noticeable residual thermal resistivity is observed. It is concluded that in compounds with inhomogeneous intermediate rare-earthion valence, to which Sm₃S₄ belongs, electron hopping from Sm²⁺ (ion with a larger radius) to Sm³⁺ (ion with a smaller radius) and back generates local stresses in the crystal lattice which bring about a change in the thermal conductivity scaling of κ_ph from T ^?1.2 to T ^?0.3 and the formation of an appreciable residual thermal resistivity.     

50 MeV Li3+ ion irradiation effect on structural, electrical, and dielectric properties of PVA-based nanocomposite polymer electrolytes

Nanocomposite polymer electrolyte thin films of polyvinyl alcohol (PVA)-orthophosphoric acid (H₃PO₄)-Al₂O₃ have been prepared by solution cast technique. Films are irradiated with 50 MeV Li³⁺ ions having four different fluences viz. 5?×?10¹⁰, 1?×?10¹¹, 5?×?10¹¹, and 1?×?10¹² ions/cm². The effect of irradiation on polymeric samples has been studied and characterized. X-ray diffraction spectra reveal that percent degree of crystallinity of samples decrease with ion fluences. Glass transition and melting temperatures have been also decreased as observed in differential scanning calorimetry. A possible complexation/interaction has been shown by Fourier transform infrared spectroscopy. Temperature-dependent ionic conductivity shows an Arrhenius behavior before and after glass transition temperature. It is observed that ionic conductivity increases with ion fluences and after a critical fluence, it starts to decrease. Maximum ionic conductivity of ～2.3?×?10^?5 S/cm owing to minimum activation energy of ～0.012 eV has been observed for irradiated electrolyte sample at fluence of 5?×?10¹¹ ions/cm². The dielectric constant and dielectric loss also increase with ion fluences while they decrease with frequency. Transference number of ions shows that the samples are of purely ionic in nature before and after ion irradiation.     

Non linear optical properties of lithium hydrogen phosphite

We present a comparison of the lithium hydrogen phosphite (LiH₂PO₃) an alkaline salt build up from (PO₃H)² irregular tetrahedra, with respect to KDP, which involves (PO₄)³ regular ones. The loss of symmetry is very apparent, unfortunately an accidental cancellation of the effective non linear coefficient near phase matching configuration, makes this compound unuseful for device application.