嫁接法制备Ni/SBA-15催化剂的催化氯苯加氢脱氯

SBA-15表面经嫁接方式引入氨基官能团,与Ni络合制备了SBA-15负载的Ni催化剂(Ni/SBA-15N)。同时,采用传统的浸渍法制备了具有相似Ni负载量的催化剂(Ni/SBA-15)。在负载量相近条件下,Ni/SBA-15N的Ni颗粒分散性均高于Ni/SBA-15。XRD和TPR结果表明,催化剂焙烧后,在氨化SBA-15表面,Ni以硅酸镍形式存在,而在SBA-15表面,Ni以NiO形式存在。Ni/SBA-15对氯苯催化加氢脱氯活性不随Ni负载量的变化而变化;而在Ni/SBA-15N中,Ni负载量增加,催化剂活性增加。     

负载型Pd/TiO2和Pd-Ag/TiO2催化剂的乙炔选择性加氢催化性能

利用程序升温还原(TPR)、X-射线衍射(XRD)、CO吸附-红外光谱(CO-IR)、电子顺磁共振(EPR)和微型催化反应评价等手段, 研究了负载Pd/γ-Al2O3, Pd/TiO2和Pd-Ag/TiO2催化剂的结构和乙炔选择性加氢催化性能. 结果表明, Pd/TiO2催化剂具有较Pd/γ-Al2O3催化剂更优良的乙炔选择性加氢催化性能, 这与Pd-TiO2之间的强相互作用密切相关. Pd-TiO2之间的强相互作用不仅使负载型钯金属催化剂具有较高的乙炔加氢催化选择性, 而且具有较高的乙炔加氢催化活性. Pd/TiO2催化剂中添加Ag 组分后, Pd金属可促进Ag+的还原并可能形成Pd-Ag合金, 催化剂的乙烯选择性虽有所增加, 但乙炔转化率和乙烯收率下降.     

CuO/SBA-15催化剂上巴豆醛选择性加氢

通过γ-氨丙基三甲氧基硅烷(APTS)偶联与Cu2 离子络合两步法将CuO负载到介孔分子筛SBA-15上,制得CuO/SBA-15催化剂,考察了催化剂的巴豆醛选择性加氢反应性能.通过X射线粉末衍射、氮气吸脱附和程序升温还原(TPR)技术对催化剂进行了表征.结果表明,SBA-15分子筛负载CuO后保持原有的介孔结构,但是孔容和比面表积随着CuO负载量的增大而下降.TPR结果表明CuO/SBA-15系列催化剂有三种CuO物种:高分散CuO、晶相CuO和进入SBA-15分子筛骨架的Cu2 .高分散CuO物种对巴豆醛加氢反应的催化活性最高,晶相CuO物种次之,而进入SBA-15分子筛骨架的Cu2 物种几乎没有活性.     

APTS改性SBA-15负载Ni-B非晶态合金催化加氢脱硫性能的研究

采用共价接枝法制备APTS改性介孔分子筛SBA-15,将氨基官能团接枝到SBA-15表面.并采用化学还原法制备了Ni-B/SBA-15-APTS非晶态合金催化剂,以噻吩加氢脱硫为探针反应,研究了其催化加氢脱硫性能.结果表明,240℃时,APTS改性SBA-15所负载的Ni-B催化剂噻吩转化率达到50.8%,较未改性SBA-15所负载的催化剂噻吩转化率有显著地提高.由于氨基与Ni2+的配合作用,有助于Ni在催化剂中的分散,因而更容易被还原.ICP结果表明,在相同的制备条件下,相比未改性的SBA-15,APTS改性SBA-15使其催化剂中Ni的负载量增加,并且非晶态合金组成中Ni的含量也增大,B的含量降低,有利于提高催化剂的活性.     

Preparation and Hydrodesulfurization Performance of Ni-B Amorphous Alloy Catalyst Supported by APTS Modified SBA-15

采用共价接枝法制备APTS改性介孔分子筛SBA-15,将氨基官能团接枝到SBA-15表面.并采用化学还原法制备了Ni-B/SBA-15-APTS非晶态合金催化剂,以噻吩加氢脱硫为探针反应,研究了其催化加氢脱硫性能.结果表明,240℃时,APTS改性SBA-15所负载的Ni-B催化剂噻吩转化率达到50.8%,较未改性SBA-15所负载的催化剂噻吩转化率有显著地提高.由于氨基与Ni2＋的配合作用,有助于Ni在催化剂中的分散,因而更容易被还原.ICP结果表明,在相同的制备条件下,相比未改性的SBA-15,APTS改性SBA-15使其催化剂中Ni的负载量增加,并且非晶态合金组成中Ni的含量也增大,B的含量降低,有利于提高催化剂的活性.     

SBA-15负载钒氧化物催化剂上甲烷选择氧化反应

对SBA-15负载的钒、钼、钨氧化物催化的甲烷选择氧化反应性能进行了比较,发现VO_x/SBA-15催化剂优于MoOx/SBA-15和WOx/SBA-15催化剂.针对钒氧化物催化剂,考察了不同钒源、不同载体以及少量P元素的添加对催化性能的影响,结果表明以SBA-15为载体的催化剂的性能好于MCM-41和Cab-O-Sil为载体的催化剂;与V₂O₅,VO(C₂O₄)相比,NH₄VO₃是制备性能良好的VO_x/SBA-15的钒源;在VO_x/SBA-15中,添加少量P元素后,HCHO的选择性有一定程度的提高.XRD,N₂物理吸附、UN-Raman和H₂-TPR表征结果表明,负载量低于3 wt%时,钒组分可能主要以高分散的单核的VO_x物种存在,我们推测该物种对甲烷选择氧化制甲醛起关键作用.     

Pd/Amberlyst-45催化剂催化水相中苯酚选择性加氢制环己酮(英文)

环己酮是重要的有机化工原料和工业溶剂,是制造尼龙、己内酰胺和己二酸的主要中间体,环己酮的绿色生产工艺受到人们关注.目前全世界环己酮年产量接近900万吨,但环己酮生产仍主要以环己烷为原料,采用富氧空气氧化为环己基过氧化氢,再在铬酸叔丁酯催化剂作用下分解为环己醇和环己酮的混合物,然后经一系列蒸馏精制后得到环己酮、工艺复杂、能耗高,而且设备腐蚀、环境污染及安全问题严重.因此,大量工作正致力于新工艺和新催化剂研究,其中光催化氧化、分子筛催化氧化和金属氧化物催化氧化等都有相关报道,同时还有学者开发了其它环己酮制备新方法,如环己烯水合法、苯加氢法、环己醇氧化法和苯酚加氢法等.苯酚直接选择性加氢合成环己酮研究具有重要意义.苯酚加氢通常有两种工艺,气相加氢和液相加氢,由于液相加氢具有无需将反应物汽化、能耗较低和催化剂反应活性高等优势而受到广泛关注.但是目前大量文献报道的苯酚加氢过程仍需要高温条件且较易产生环己醇和环己烷等副产物,大部分催化反应需在有机溶剂中进行,因此如何提高环己酮选择性,减小环境影响成为近年来的热门课题.在过去数年中,人们筛选了大量催化剂,其中Pd催化剂具有较高活性和目的产物选择性,因为其对羰基表现出较低的催化活性.研究还发现,催化剂载体对苯酚加氢产物分布有重要影响,酸性载体或酸性助剂的加入均能提高苯酚转化率和环己酮选择性,可能的原因是催化剂表面可与苯酚羟基形成O-H…π强相互作用,使苯酚分子更容易吸附在载体表面,而一旦苯酚经催化加氢生成环己酮,由于失去羟基与载体表面相互作用,环己酮更容易从载体表面脱附,从而避免过度加氢生成环己醇,同时酸性位点可以增强Pd的电子密度,提高催化加氢活性.另外,通过添加助剂也可有效改善催化剂性能.然而,到目前为止,通过单一的一种催化剂仍然很难同时实现苯酚的高转化率和环己酮的高选择性.因此,开发新催化剂和简便的生产工艺对环己酮高效高质量生产具有重要意义.本文使用一种多孔、不易溶解的酸性离子交换树脂Amberlyst-45(A-45)为载体,采用简单的浸渍工艺制备了一系列不同Pd负载量的Pd/A-45催化剂,详细考察了催化剂在水相中对苯酚选择性加氢制环己酮的催化活性和选择性,包括反应温度、催化剂用量、反应时间和Pd负载量等对反应活性的影响及催化剂重复使用情况,并且与传统的SiO_2,ZnO,MgO,Al_2O_3和活性炭负载的Pd催化剂进行对比.研究发现,Pd/A-45催化剂在温和反应条件(40-100℃,0.2-1 MPa)下具有极高的催化活性和选择性,在适宜的反应条件下苯酚转化率达到100%,环己酮选择性高于89%.进一步分析由不同活性金属负载量制备的不同粒径Pd/A-45催化剂的活性规律发现,苯酚加氢生成环己酮是一个结构敏感型反应,其中Pd颗粒尺寸为12-14 nm时更有利于环己酮生成.     

Pd/ZnO在乙炔选择加氢反应中的不同催化机制研究(英文)

化学选择性是评价催化剂性能最重要的参数之一,它直接决定了产物的经济价值及后续的分离成本.传统的负载型金属催化剂由于其金属粒径分布不均,且不同原子数组成的粒子通常具有特征产物选择性,从而限制化学选择性的提高;另一方面,对于金属多原子活性中心,反应物在催化剂表面可以存在多种吸附构型进而衍化为不同产物,产物可控性差.因此,获得金属尺寸均一,且具有原子分散的活性中心,即单原子催化剂,成为官能团多相催化转化高选择性的迫切需求.本课题组通过400 oC还原1%-Pd/ZnO得到PdZn金属间化合物,依据其规律排布的Pd-Zn-Pd单元获得Pd基单原子催化剂.该催化剂在乙烯化工中少量乙炔的加氢转化反应中获得令人欣喜的催化性能——兼具有乙炔的高转化率和乙烯的高选择性.结合微量吸附量热、理论计算等表征,Pd活性中心在PdZn金属间化合物中的特殊空间排布是其优异催化性能的根源,即乙炔以较强的σ键吸附在两个相邻的单Pd金属中心,易吸附活化加氢生成乙烯,而乙烯则吸附于单Pd金属中心,较弱的π键形式吸附有利于其脱附避免过渡加氢.基于前期研究,构筑具有均一单金属中心的负载型单原子催化剂是获得高选择性的另一有效方法,且较之于PdZn金属间化合物催化剂,该类单原子催化剂兼具有原子利用率最大化的优点.本文采用等体积浸渍法制备Pd/ZnO催化剂,通过降低Pd金属含量(1 wt%→0.1 wt%→0.01 wt%)并在较低的温度下(100 oC)还原(H2-TPR表明高温还原形成PdZn金属间化合物型合金)得到负载型单原子催化剂(Pd1/ZnO SAC).高分辨电镜结果表明,当Pd负载量由1%降至0.1%,金属纳米颗粒的粒径尺寸显著降低,而在0.01%-Pd/ZnO催化剂表面,Pd活性中心则以单原子状态分散于载体ZnO表面.X-射线吸收光谱及电子能谱表明,随着负载量的降低,Pd活性物种具有更高的正电性.该催化剂在乙炔选择性加氢反应中表现出更加优越的催化性能,具有与PdZn催化剂相当的高选择性,而更优的比活性.这归结于Pd1/ZnO单原子催化剂的Pdδ+单原子活性中心有助于其与乙炔的静电相互作用并吸附活化加氢生成乙烯,并促使乙烯以较弱的π键吸附,从而易于从催化剂表面脱附获得高选择性.     

Pd-Cu/γ-Al_2O_3催化苯乙炔选择性加氢反应

为了提高苯乙炔加氢反应中的苯乙烯选择性,本文采用"胶体-等体积浸渍"两步法制备了Pd-Cu/γ-Al2O3双金属催化剂.利用高分辨率透射电镜(HRTEM)、X射线光电子能谱(XPS)、CO脉冲化学吸附、N2物理吸附、电感耦合等离子体原子发射光谱(ICP-AES)等技术表征了Pd-Cu/γ-Al2O3的结构性质,考察了Cu/Pd摩尔比、Pd负载量以及金属引入顺序对Pd-Cu/γ-Al2O3催化苯乙炔选择性加氢性能的影响.结果表明,与Pd/γ-Al2O3单金属催化剂相比,Pd-Cu/γ-Al2O3的苯乙烯选择性大幅度提高,尤其是当Pd负载量为0.3%(w),且Cu/Pd摩尔比为0.6时,Pd-Cu/γ-Al2O3表现出优异的加氢选择性;在0.1 MPa和40°C下,当苯乙炔转化率为90%时,双金属催化剂的苯乙烯选择性可达95%;当转化率达到99%以上时,苯乙烯选择性仍保持在82%左右.分析表明,Pd-Cu/γ-Al2O3中形成了Pd-Cu合金,但是两种金属间不存在电子转移,Cu对Pd的几何效应才是导致Pd-Cu/γ-Al2O3苯乙烯选择性增加的主要原因.     

Cu-Zn-Zr/SBA-15介孔催化剂的制备及CO2加氢合成甲醇的催化性能

以具有骨架结构的SBA-15介孔分子筛为载体,采用浸渍法合成了具有高比表面积、不同金属氧化物含量的Cu-Zn-Zr介孔催化剂CZZx/SBA-15(x=0.3,0.4,0.5,0.6).采用N2吸附-脱附(BET)、X射线衍射(XRD)、H2程序升温还原(H2-TPR)、CO2吸附(CO2-TPD)和透射电子显微镜(TEM)等手段对样品进行了表征.在固定床反应器上评价了其CO2加氢合成甲醇的催化性能.实验结果表明,CZZx/SBA-15催化剂具有介孔结构,负载的Cu O,Zn O和Zr O2能够很好地分散在表面,并且负载氧化物晶粒尺寸不同.催化剂的铜比表面积SCu与甲醇催化活性呈近似线性关系,其中CZZ0.4/SBA-15催化剂表现出最大甲醇选择性(54.32%),与CZZ相比,甲醇选择性增加24.85%.随着金属氧化物负载量的增大,催化剂比表面积和SCu明显减小,甲醇选择性与收率也相应减小,负载型CZZx/SBA-15催化剂表面结构对CO2加氢合成甲醇反应活性起关键作用.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Summary of development of the theory of stability of colloids and thin films

In this review, the research of the author in the field of colloidal systems is summarized. The factors influencing colloidal stability are systematized and analyzed. Examples are presented to illustrate the practical utilization of the theory of stability of colloids and thin films.This review was prepared on the basis of the works of the author, which were awarded the State Premium for 1991 in the field of science and technology, chemistry section.Institute of Physical Chemistry, Russian Academy of Sciences, 117915 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1708–1717, August, 1992.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Thermodynamics of the formation of oxosulfides of rare-earth elements

The enthalpies of solution of several oxosulfides of rare-earth elements and the high-temperature enthalpies of oxosulfides and oxosulfates of lanthanum and yttrium were measured using solution calorimetry and high-temperature microcalorimetry techniques. Standard enthalpies of formation and some thermodynamic properties of oxosulfides and oxosulfates were calculated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2 pp. 294–297, February, 1997.     

恶臭嗅辨实验室建设探讨

针对恶臭测试的环境影响问题,提出了解决的实例方案,并对方案的要点及优缺点进行讨论,此方案在实际操作中具有较好的效果。