Two‐Dimensional Cobalt‐/Nickel‐Based Oxide Nanosheets for High‐Performance Sodium and Lithium Storage

Two‐dimensional (2D) nanomaterials are one of the most promising types of candidates for energy‐storage applications due to confined thicknesses and high surface areas, which would play an essential role in enhanced reaction kinetics. Herein, a universal process that can be extended for scale up is developed to synthesise ultrathin cobalt‐/nickel‐based hydroxides and oxides. The sodium and lithium storage capabilities of Co₃O₄ nanosheets are evaluated in detail. For sodium storage, the Co₃O₄ nanosheets exhibit excellent rate capability (e.g., 179 mA h g^?1 at 7.0 A g^?1 and 150 mA h g^?1 at 10.0 A g^?1) and promising cycling performance (404 mA h g^?1 after 100 cycles at 0.1 A g^?1). Meanwhile, very impressive lithium storage performance is also achieved, which is maintained at 1029 mA h g^?1 after 100 cycles at 0.2 A g^?1. NiO and NiCo₂O₄ nanosheets are also successfully prepared through the same synthetic approach, and both deliver very encouraging lithium storage performances. In addition to rechargeable batteries, 2D cobalt‐/nickel‐based hydroxides and oxides are also anticipated to have great potential applications in supercapacitors, electrocatalysis and other energy‐storage‐/‐conversion‐related fields.     

Double‐Helix Structure in Carrageenan–Metal Hydrogels: A General Approach to Porous Metal Sulfides/Carbon Aerogels with Excellent Sodium‐Ion Storage

The metal sulfide‐carbon nanocomposite is a new class of anode material for sodium ion batteries, but its development is restricted by its relative poor rate ability and cyclic stability. Herein, we report the use of double‐helix structure of carrageenan–metal hydrogels for the synthesis of 3D metal sulfide (M_xS_y) nanostructure/carbon aerogels (CAs) for high‐performance sodium‐ion storage. The method is unique, and can be used to make multiple M_xS_y/CAs (such as FeS/CA, Co₉S₈/CA, Ni₃S₄/CA, CuS/CA, ZnS/CA, and CdS/CA) with ultra‐small nanoparticles and hierarchical porous structure by pyrolyzing the carrageenan–metal hydrogels. The as‐prepared FeS/CA exhibits a high reversible capacity and excellent cycling stability (280 mA h^?1 at 0.5 A g^?1 over 200 cycles) and rate performance (222 mA h^?1 at 5 A g^?1) when used as the anode material for sodium‐ion batteries. The work shows the value of biomass‐derived metal sulfide–carbon heterostuctures in sodium‐ion storage.     

Fiber‐in‐Tube Design of Co9S8‐Carbon/Co9S8: Enabling Efficient Sodium Storage

The sodium‐ion battery is a promising battery technology owing to its low price and high abundance of sodium. However, the sluggish kinetics of sodium ion makes it hard to achieve high‐rate performance, therefore impairing the power density. In this work, a fiber‐in‐tube Co₉S₈‐carbon(C)/Co₉S₈ is designed with fast sodiation kinetics. The experimental and simulation analysis show that the dominating capacitance mechanism for the high Na‐ion storage performance is due to abundant grain boundaries, three exposed layer interfaces, and carbon wiring in the design. As a result, the fiber‐in‐tube hybrid anode shows a high specific capacity of 616 mAh g^?1 after 150 cycles at 0.5 A g^?1. At 1 A g^?1, a capacity of ca. 451 mAh g^?1 can be achieved after 500 cycles. More importantly, a high energy density of 779 Wh kg^?1 and power density of 7793 W kg^?1 can be obtained simultaneously.     

Ultrathin Titanate Nanosheets/Graphene Films Derived from Confined Transformation for Excellent Na/K Ion Storage

Confined transformation of assembled two‐dimensional MXene (titanium carbide) and reduced graphene oxide (rGO) nanosheets was employed to prepare the free‐standing films of the integrated ultrathin sodium titanate (NTO)/potassium titanate (KTO) nanosheets sandwiched between graphene layers. The ultrathin Ti‐based nanosheets reduce the diffusion distance while rGO layers enhance conductivity. Incorporation of graphene into the titanate films produced efficient binder‐free anodes for ion storage. The resulting flexible NTO/rGO and KTO/rGO electrodes exhibited excellent rate performances and long cycling stability characterized by reversible capacities of 72 mA h g^?1 at 5 A g^?1 after 10000 cycles and 75 mA h g^?1 after 700 cycles at 2 A g^?1 for sodium and potassium ion batteries, respectively. These results demonstrate the superiority of the unique sandwich‐type electrodes.     

Hierarchical MoS2@Carbon Microspheres as Advanced Anodes for Li‐Ion Batteries

Hierarchical hybridized nanocomposites with rationally constructed compositions and structures have been considered key for achieving superior Li‐ion battery performance owing to their enhanced properties, such as fast lithium ion diffusion, good collection and transport of electrons, and a buffer zone for relieving the large volume variations during cycling processes. Hierarchical MoS₂@carbon microspheres (HMCM) have been synthesized in a facile hydrothermal treatment. The structure analyses reveal that ultrathin MoS₂ nanoflakes (ca. 2–5 nm) are vertically supported on the surface of carbon nanospheres. The reversible capacity of the HMCM nanocomposite is maintained at 650 mA h g^?1 after 300 cycles at 1 A g^?1. Furthermore, the capacity can reach 477 mA h g^?1 even at a high current density of 4 A g^?1. The outstanding electrochemical performance of HMCM is attributed to the synergetic effect between the carbon spheres and the ultrathin MoS₂ nanoflakes. Additionally, the carbon matrix can supply conductive networks and prevent the aggregation of layered MoS₂ during the charge/discharge process; and ultrathin MoS₂ nanoflakes with enlarged surface areas, which can guarantee the flow of the electrolyte, provide more active sites and reduce the diffusion energy barrier of Li⁺ ions.     

Ruthenium‐Oxide‐Coated Sodium Vanadium Fluorophosphate Nanowires as High‐Power Cathode Materials for Sodium‐Ion Batteries

Sodium‐ion batteries are a very promising alternative to lithium‐ion batteries because of their reliance on an abundant supply of sodium salts, environmental benignity, and low cost. However, the low rate capability and poor long‐term stability still hinder their practical application. A cathode material, formed of RuO₂‐coated Na₃V₂O₂(PO₄)₂F nanowires, has a 50 nm diameter with the space group of I4/mmm. When used as a cathode material for Na‐ion batteries, a reversible capacity of 120 mAh g^?1 at 1 C and 95 mAh g^?1 at 20 C can be achieved after 1000 charge–discharge cycles. The ultrahigh rate capability and enhanced cycling stability are comparable with high performance lithium cathodes. Combining first principles computational investigation with experimental observations, the excellent performance can be attributed to the uniform and highly conductive RuO₂ coating and the preferred growth of the (002) plane in the Na₃V₂O₂(PO₄)₂F nanowires.     

Ultrathin MoS2 Nanosheets Supported on N‐doped Carbon Nanoboxes with Enhanced Lithium Storage and Electrocatalytic Properties

Molybdenum disulfide (MoS₂) has received considerable interest for electrochemical energy storage and conversion. In this work, we have designed and synthesized a unique hybrid hollow structure by growing ultrathin MoS₂ nanosheets on N‐doped carbon shells (denoted as C@MoS₂ nanoboxes). The N‐doped carbon shells can greatly improve the conductivity of the hybrid structure and effectively prevent the aggregation of MoS₂ nanosheets. The ultrathin MoS₂ nanosheets could provide more active sites for electrochemical reactions. When evaluated as an anode material for lithium‐ion batteries, these C@MoS₂ nanoboxes show high specific capacity of around 1000 mAh g^?1, excellent cycling stability up to 200 cycles, and superior rate performance. Moreover, they also show enhanced electrocatalytic activity for the electrochemical hydrogen evolution.     

K2Mn4O8/Reduced Graphene Oxide Nanocomposites for Excellent Lithium Storage and Adsorption of Lead Ions

Ion diffusion efficiency at the solid–liquid interface is an important factor for energy storage and adsorption from aqueous solution. Although K₂Mn₄O₈ (KMO) exhibits efficient ion diffusion and ion‐exchange capacities, due to its high interlayer space of 0.70 nm, how to enhance its mass transfer performance is still an issue. Herein, novel layered KMO/reduced graphene oxide (RGO) nanocomposites are fabricated through the anchoring of KMO nanoplates on RGO with a mild solution process. The face‐to‐face structure facilitates fast transfer of lithium and lead ions; thus leading to excellent lithium storage and lead ion adsorption. The anchoring of KMO on RGO not only increases electrical conductivity of the layered nanocomposites, but also effectively prevents aggregation of KMO nanoplates. The KMO/RGO nanocomposite with an optimal RGO content exhibits a first cycle charge capacity of 739 mA h g^?1, which is much higher than that of KMO (326 mA h g^?1). After 100 charge–discharge cycles, it still retains a charge capacity of 664 mA h g^?1. For the adsorption of lead ions, the KMO/RGO nanocomposite exhibits a capacity of 341 mg g^?1, which is higher than those of KMO (305 mg g^?1) and RGO (63 mg g^?1) alone.     

Three‐in‐One Oxygen Vacancies: Whole Visible‐Spectrum Absorption,Efficient Charge Separation,and Surface Site Activation for Robust CO2 Photoreduction

A facile and controllable in situ reduction strategy is used to create surface oxygen vacancies (OVs) on Aurivillius‐phase Sr₂Bi₂Nb₂TiO₁₂ nanosheets, which were prepared by a mineralizer‐assisted soft‐chemical method. Introduction of OVs on the surface of Sr₂Bi₂Nb₂TiO₁₂ extends photoresponse to cover the whole visible region and also tremendously promotes separation of photoinduced charge carriers. Adsorption and activation of CO₂ molecules on the surface of the catalyst are greatly enhanced. In the gas‐solid reaction system without co‐catalysts or sacrificial agents, OVs‐abundant Sr₂Bi₂Nb₂TiO₁₂ nanosheets show outstanding CO₂ photoreduction activity, producing CO with a rate of 17.11 μmol g^?1 h^?1, about 58 times higher than that of the bulk counterpart, surpassing most previously reported state‐of‐the‐art photocatalysts. Our study provides a three‐in‐one integrated solution to advance the performance of photocatalysts for solar‐energy conversion and generation of renewable energy.     

Micro‐MoS2 with Excellent Reversible Sodium‐Ion Storage

Low storage capacity and poor cycling stability are the main drawbacks of the electrode materials for sodium‐ion (Na‐ion) batteries, due to the large radius of the Na ion. Here we show that micro‐structured molybdenum disulfide (MoS₂) can exhibit high storage capacity and excellent cycling and rate performances as an anode material for Na‐ion batteries by controlling its intercalation depth and optimizing the binder. The former method is to preserve the layered structure of MoS₂, whereas the latter maintains the integrity of the electrode during cycling. A reversible capacity of 90 mAh g^?1 is obtained on a potential plateau feature when less than 0.5 Na per formula unit is intercalated into micro‐MoS₂. The fully discharged electrode with sodium alginate (NaAlg) binder delivers a high reversible capacity of 420 mAh g^?1. Both cells show excellent cycling performance. These findings indicate that metal chalcogenides, for example, MoS₂, can be promising Na‐storage materials if their operation potential range and the binder can be appropriately optimized.     

Ultrathin 2D Graphitic Carbon Nitride on Metal Films: Underpotential Sodium Deposition in Adlayers for Sodium‐Ion Batteries

Efficient and low‐cost anode materials for the sodium‐ion battery are highly desired to enable more economic energy storage. Effects on an ultrathin carbon nitride film deposited on a copper metal electrode are presented. The combination of effects show an unusually high capacity to store sodium metal. The g‐C₃N₄ film is as thin as 10 nm and can be fabricated by an efficient, facile, and general chemical‐vapor deposition method. A high reversible capacity of formally up to 51 Ah g^?1 indicates that the Na is not only stored in the carbon nitride as such, but that carbon nitride activates also the metal for reversible Na‐deposition, while forming at the same time an solid electrolyte interface layer avoiding direct contact of the metallic phase with the liquid electrolyte.     

High‐Performance Sodium‐Ion Batteries and Sodium‐Ion Pseudocapacitors Based on MoS2/Graphene Composites

Sodium‐ion energy storage, including sodium‐ion batteries (NIBs) and electrochemical capacitive storage (NICs), is considered as a promising alternative to lithium‐ion energy storage. It is an intriguing prospect, especially for large‐scale applications, owing to its low cost and abundance. MoS₂ sodiation/desodiation with Na ions is based on the conversion reaction, which is not only able to deliver higher capacity than the intercalation reaction, but can also be applied in capacitive storage owing to its typically sloping charge/discharge curves. Here, NIBs and NICs based on a graphene composite (MoS₂/G) were constructed. The enlarged d‐spacing, a contribution of the graphene matrix, and the unique properties of the MoS₂/G substantially optimize Na storage behavior, by accommodating large volume changes and facilitating fast ion diffusion. MoS₂/G exhibits a stable capacity of approximately 350 mAh g^?1 over 200 cycles at 0.25 C in half cells, and delivers a capacitance of 50 F g^?1 over 2000 cycles at 1.5 C in pseudocapacitors with a wide voltage window of 0.1–2.5 V.     

Three‐in‐One Oxygen Vacancies: Whole Visible‐Spectrum Absorption,Efficient Charge Separation,and Surface Site Activation for Robust CO2 Photoreduction

A facile and controllable in situ reduction strategy is used to create surface oxygen vacancies (OVs) on Aurivillius‐phase Sr₂Bi₂Nb₂TiO₁₂ nanosheets, which were prepared by a mineralizer‐assisted soft‐chemical method. Introduction of OVs on the surface of Sr₂Bi₂Nb₂TiO₁₂ extends photoresponse to cover the whole visible region and also tremendously promotes separation of photoinduced charge carriers. Adsorption and activation of CO₂ molecules on the surface of the catalyst are greatly enhanced. In the gas‐solid reaction system without co‐catalysts or sacrificial agents, OVs‐abundant Sr₂Bi₂Nb₂TiO₁₂ nanosheets show outstanding CO₂ photoreduction activity, producing CO with a rate of 17.11 μmol g^?1 h^?1, about 58 times higher than that of the bulk counterpart, surpassing most previously reported state‐of‐the‐art photocatalysts. Our study provides a three‐in‐one integrated solution to advance the performance of photocatalysts for solar‐energy conversion and generation of renewable energy.     

A Multi‐Wall Sn/SnO2@Carbon Hollow Nanofiber Anode Material for High‐Rate and Long‐Life Lithium‐Ion Batteries

Multi‐wall Sn/SnO₂@carbon hollow nanofibers evolved from SnO₂ nanofibers are designed and programable synthesized by electrospinning, polypyrrole coating, and annealing reduction. The synthesized hollow nanofibers have a special wire‐in‐double‐wall‐tube structure with larger specific surface area and abundant inner spaces, which can provide effective contacting area of electrolyte with electrode materials and more active sites for redox reaction. It shows excellent cycling stability by virtue of effectively alleviating pulverization of tin‐based electrode materials caused by volume expansion. Even after 2000 cycles, the wire‐in‐double‐wall‐tube Sn/SnO₂@carbon nanofibers exhibit a high specific capacity of 986.3 mAh g^?1 (1 A g^?1) and still maintains 508.2 mAh g^?1 at high current density of 5 A g^?1. This outstanding electrochemical performance suggests the multi‐wall Sn/SnO₂@ carbon hollow nanofibers are great promising for high performance energy storage systems.     

Ascorbic Acid‐Assisted Synthesis of Mesoporous Sodium Vanadium Phosphate Nanoparticles with Highly sp2‐Coordinated Carbon Coatings as Efficient Cathode Materials for Rechargeable Sodium‐Ion Batteries

Herein, mesoporous sodium vanadium phosphate nanoparticles with highly sp²‐coordinated carbon coatings (meso‐Na₃V₂(PO₄)₃/C) were successfully synthesized as efficient cathode material for rechargeable sodium‐ion batteries by using ascorbic acid as both the reductant and carbon source, followed by calcination at 750 °C in an argon atmosphere. Their crystalline structure, morphology, surface area, chemical composition, carbon nature and amount were systematically explored. Following electrochemical measurements, the resultant meso‐Na₃V₂(PO₄)₃/C not only delivered good reversible capacity (98 mAh g^?1 at 0.1 A g^?1) and superior rate capability (63 mAh g^?1 at 1 A g^?1) but also exhibited comparable cycling performance (capacity retention: ≈74 % at 450 cycles at 0.4 A g^?1). Moreover, the symmetrical sodium‐ion full cell with excellent reversibility and cycling stability was also achieved (capacity retention: 92.2 % at 0.1 A g^?1 with 99.5 % coulombic efficiency after 100 cycles). These attributes are ascribed to the distinctive mesostructure for facile sodium‐ion insertion/extraction and their continuous sp²‐coordinated carbon coatings, which facilitate electronic conduction.     

High Crystalline Prussian White Nanocubes as a Promising Cathode for Sodium‐ion Batteries

Prussian blue and its analogues (PBAs) have been recognized as one of the most promising cathode materials for room‐temperature sodium‐ion batteries (SIBs). Herein, we report high crystalline and Na‐rich Prussian white Na₂CoFe(CN)₆ nanocubes synthesized by an optimized and facile co‐precipitation method. The influence of crystallinity and sodium content on the electrochemical properties was systematically investigated. The optimized Na₂CoFe(CN)₆ nanocubes exhibited an initial capacity of 151 mA h g^?1, which is close to its theoretical capacity (170 mA h g^?1). Meanwhile, the Na₂CoFe(CN)₆ cathode demonstrated an outstanding long‐term cycle performance, retaining 78 % of its initial capacity after 500 cycles. Furthermore, the Na₂CoFe(CN)₆ Prussian white nanocubes also achieved a superior rate capability (115 mA h g^?1 at 400 mA g^?1, 92 mA h g^?1 at 800 mA g^?1). The enhanced performances could be attributed to the robust crystal structure and rapid transport of Na ions through large channels in the open‐framework. Most noteworthy, the as‐prepared Na₂CoFe(CN)₆ nanocubes are not only low‐cost in raw materials but also contain a rich sodium content (1.87 Na ions per lattice unit cell), which will be favorable for full cell fabrication and large‐scale electric storage applications.     

MoS2 Nanoflowers with Expanded Interlayers as High‐Performance Anodes for Sodium‐Ion Batteries

MoS₂ nanoflowers with expanded interlayer spacing of the (002) plane were synthesized and used as high‐performance anode in Na‐ion batteries. By controlling the cut‐off voltage to the range of 0.4–3 V, an intercalation mechanism rather than a conversion reaction is taking place. The MoS₂ nanoflower electrode shows high discharge capacities of 350 mAh g^?1 at 0.05 A g^?1, 300 mAh g^?1 at 1 A g^?1, and 195 mAh g^?1 at 10 A g^?1. An initial capacity increase with cycling is caused by peeling off MoS₂ layers, which produces more active sites for Na⁺ storage. The stripping of MoS₂ layers occurring in charge/discharge cycling contributes to the enhanced kinetics and low energy barrier for the intercalation of Na⁺ ions. The electrochemical reaction is mainly controlled by the capacitive process, which facilitates the high‐rate capability. Therefore, MoS₂ nanoflowers with expanded interlayers hold promise for rechargeable Na‐ion batteries.     

Hierarchical Metal Sulfide/Carbon Spheres: A Generalized Synthesis and High Sodium‐Storage Performance

The development of suitable anode materials is far from satisfactory and is a major scientific challenge for a competitive sodium‐ion battery technology. Metal sulfides have demonstrated encouraging results, but still suffer from sluggish kinetics and severe capacity decay associated with the phase change. Herein we show that rational electrode design, that is, building efficient electron/ion mixed‐conducting networks, can overcome the problems resulting from conversion reactions. A general strategy for the preparation of hierarchical carbon‐coated metal sulfide (MS?C) spheres through thermal sulfurization of metal glycerate has been developed. We demonstrate the concept by synthesizing highly uniform hierarchical carbon coated vanadium sulfide (V₂S₃?C) spheres, which exhibit a highly reversibly sodium storage capacity of 777 mAh g^?1 at 100 mA g^?1, excellent rate capability (410 mAh g^?1 at 4000 mA g^?1), and impressive cycling ability.     

A New Anode for Lithium‐Ion Batteries Based on Single‐Walled Carbon Nanotubes and Graphene: Improved Performance through a Binary Network Design

Carbon nanomaterials, especially graphene and carbon nanotubes, are considered to be favorable alternatives to graphite‐based anodes in lithium‐ion batteries, owing to their high specific surface area, electrical conductivity, and excellent mechanical flexibility. However, the limited number of storage sites for lithium ions within the sp²‐carbon hexahedrons leads to the low storage capacity. Thus, rational structure design is essential for the preparation of high‐performance carbon‐based anode materials. Herein, we employed flexible single‐walled carbon nanotubes (SWCNTs) with ultrahigh electrical conductivity as a wrapper for 3D graphene foam (GF) by using a facile dip‐coating process to form a binary network structure. This structure, which offered high electrical conductivity, enlarged the electrode/electrolyte contact area, shortened the electron‐/ion‐transport pathways, and allowed for efficient utilization of the active material, which led to improved electrochemical performance. When used as an anode in lithium‐ion batteries, the SWCNT‐GF electrode delivered a specific capacity of 953 mA h g^?1 at a current density of 0.1 A g^?1 and a high reversible capacity of 606 mA h g^?1 after 1000 cycles, with a capacity retention of 90 % over 1000 cycles at 1 A g^?1 and 189 mA h g^?1 after 2200 cycles at 5 A g^?1.     

Sodium‐Ion Storage Properties of FeS–Reduced Graphene Oxide Composite Powder with a Crumpled Structure

The sodium‐ion storage properties of FeS–reduced graphene oxide (rGO) and Fe₃O₄‐rGO composite powders with crumpled structures have been studied. The Fe₃O₄‐rGO composite powder, prepared by one‐pot spray pyrolysis, could be transformed to an FeS‐rGO composite powder through a simple sulfidation treatment. The mean size of the Fe₃O₄ nanocrystals in the Fe₃O₄‐rGO composite powder was 4.4 nm. After sulfidation, FeS nanocrystals of size several hundred nanometers were confined within the crumpled structure of the rGO matrix. The initial discharge capacities of the FeS‐rGO and Fe₃O₄‐rGO composite powders were 740 and 442 mA h g^?1, and their initial charge capacities were 530 and 165 mA h g^?1, respectively. The discharge capacities of the FeS‐rGO and Fe₃O₄‐rGO composite powders at the 50th cycle were 547 and 150 mA h g^?1, respectively. The FeS‐rGO composite powder showed superior sodium‐ion storage performance compared to the Fe₃O₄‐rGO composite powder.