Isoselective Polymerization of rac-Lactide by Aluminum Complexes of N-Heterocyclic Carbene-Phosphinidene Adducts

The N-heterocyclic carbene-phosphinidene adducts (NHC)PH were reacted with AlMe₃ in toluene to afford the monoaluminum complexes [{(IDipp)PH}AlMe₃] and [{(IMes)PH}AlMe₃] (IDipp=1,3-bis(2,6-diisopropylphenyl)imidazolin-2-ylidene, IMes=1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene). In contrast, the dialuminum complex [{(^MeIMes)PH}(AlMe₃)₂] was obtained for ^MeIMes=1,3-bis(2,4,6-trimethylphenyl)-4,5-dimethylimidazolin-2-ylidene. These complexes served as initiators for the efficient ring-opening polymerization of rac-lactide in toluene at 60 °C. High degrees of isoselectivity were found for the poly(rac-lactide) obtained in the presence of the monoaluminum complexes (P_m up to 0.92, T_m up to 191 °C), whereas almost atactic polymers were produced by the dialuminum complex. Detailed mechanistic studies reveal that the polymerization proceeds via a coordination-insertion mechanism with the carbene-phosphinidene ligands acting as stereodirecting groups.     

Insight into Oxide‐Bridged Heterobimetallic Al/Zr Olefin Polymerization Catalysts

Reaction of (TBBP)AlMe ? THF with [Cp*₂Zr(Me)OH] gave [(TBBP)Al(THF)?O?Zr(Me)Cp*₂] (TBBP=3,3’,5,5’‐tetra‐tBu‐2,2'‐biphenolato). Reaction of [DIPPnacnacAl(Me)?O?Zr(Me)Cp₂] with [PhMe₂NH]⁺[B(C₆F₅)₄]^? gave a cationic Al/Zr complex that could be structurally characterized as its THF adduct [(DIPPnacnac)Al(Me)?O?Zr(THF)Cp₂]⁺[B(C₆F₅)₄]^? (DIPPnacnac=HC[(Me)C=N(2,6‐iPr₂?C₆H₃)]₂). The first complex polymerizes ethene in the presence of an alkylaluminum scavenger but in the absence of methylalumoxane (MAO). The adduct cation is inactive under these conditions. Theoretical calculations show very high energy barriers (ΔG=40–47 kcal mol^?1) for ethene insertion with a bridged AlOZr catalyst. This is due to an unfavorable six‐membered‐ring transition state, in which the methyl group bridges the metal and ethene with an obtuse metal‐Me‐C angle that prevents synchronized bond‐breaking and making. A more‐likely pathway is dissociation of the Al‐O‐Zr complex into an aluminate and the active polymerization catalyst [Cp*₂ZrMe]⁺.     

Yttrium Complexes as Catalysts for Living and Immortal Polymerization of Lactide to Highly Heterotactic PLA

Amino‐alkoxy‐bis(phenolate) yttrium complexes act in the presence of an excess of alcohol (up to 50 equiv. vs. Y) as highly active and stereoselective catalysts for rac‐lactide and rac‐β‐butyrolactone polymerizations. These versatile systems enable the production of large quantities of polymer with small amounts of catalyst, optimizing productivity, and also allow the preparation of polymers with functional end groups, which may be employed as intermediates for macromolecular engineering applications.

     

溶液法星型聚乳酸的合成与表征

探讨了采用辛酸亚锡为催化剂,多元醇及多元酸为引发剂,以溶液法制备星型聚乳酸的可行性,研究了不同引发剂对产物分子量的影响.采用核磁共振及DSC对产物进行了表征,结果表明:以溶液法合成星型聚乳酸是可行的,但与丙交酯开环聚合制备星型聚乳酸的方法相比,溶液法在产物结构和分子量控制上并不十分有效,由于反应受到多官能团核引发剂空间位阻和反应概率的影响,聚乳酸产物的结构除星型结构外也同时存在大量的线型结构.     

Poly(lactic acid) Polymerized by Aluminum Triflate

The ring-opening polymerization of L -lactide (LA) has been initiated by aluminum triflate (trifluoromethanesulfonate) in air using a simple glass tube at 100 °C without desiccation steps and stirring. It was found that the molecular weight of poly(lactic acid) (PLA) was increased by the addition of an alcohol as an initiator to the reaction mixture. The highest number averaged molecular weight, molecular weight distribution, and recovery of the obtained PLA at 100 °C for 6 h were 18,200, 1.20, and 73%, respectively. With the addition of a small percentage of alcohol and a long reaction time of the polymerization method with the re-addition of LA, PLA (ca. 80 wt%) with a higher molecular weight (ca. 30,000) initiated by the added alcohol was produced with PLA (ca. 20 wt%) with a lower molecular weight (ca. 2,000) initiated by impurities such as water, which exist in a monomer, initiator, or catalyst.     

Dizinc Lactide Polymerization Catalysts: Hyperactivity by Control of Ligand Conformation and Metallic Cooperativity

Understanding how to moderate and improve catalytic activity is critical to improving degradable polymer production. Here, di‐ and monozinc catalysts, coordinated by bis(imino)diphenylamido ligands, show remarkable activities and allow determination of the factors controlling performance. In most cases, the dizinc catalysts significantly out‐perform the monozinc analogs. Further, for the best dizinc catalyst, the ligand conformation controls activity: the catalyst with “folded” ligand conformation shows turnover frequency (TOF) values up to 60 000 h^?1 (0.1 mol % loading, 298 K, [LA]=1 m ), whilst that with a “planar” conformation is much slower, under similar conditions (TOF=30 h^?1). Dizinc catalysts also perform very well under immortal conditions, showing improved control, and are able to tolerate loadings as low as 0.002 mol % whilst conserving high activity (TOF=12 500 h^?1).     

沸石咪唑酯骨架-67高效催化L-丙交酯的开环聚合反应

为了探究沸石咪唑酯骨架材料(Zeolitic Imidazolate Frameworks,ZIFs)结构中的金属单元对其催化活性的影响,我们采用室温法合成了ZIF-8、Zn/Co-ZIF和ZIF-67,并用其催化L-丙交酯的本体开环聚合反应。 在相同的反应条件下,ZIF-67具有最高的催化活性。 与2-甲基咪唑(配体)作为催化剂相比,ZIF-67催化得到的聚乳酸具有高度全同立构结构。 此外,基质辅助激光解吸-飞行时间(MALDI-TOF)质谱表明,ZIF-67催化得到的聚乳酸主要为线状结构。 经过3次循环反应后,ZIF-67的催化活性没有明显降低。     

Isoselective Polymerization of rac-Lactide by Highly Active Sequential {ONNN} Magnesium Complexes

The coordination chemistry and the activities in the ring-opening polymerization catalysis of racemic lactide (LA) of magnesium complexes of a series of {ONNN}-type sequential monoanionic ligands are described. All ligands include pyridyl and substituted-phenolate as peripheral groups. The ligands bearing either chiral or meso-bipyrrolidine cores led to single diastereomeric complexes, whereas the ligands bearing a diaminoethane core led to diastereomer mixtures. All {ONNN}Mg-X complexes [X=Cl, HMDS (hexamethyldisilazide)] led to highly active and isoselective catalysts. The complexes bearing the chiral bipyrrolidine core exhibited the highest activities (full consumption of 5000 equiv. of rac-LA at RT within 5 min) and highest isoselectivities (P_m=0.91), as well as a living character. The complexes of the meso-bipyrrolidine based ligands were almost as active and slightly less stereoselective, while those of the diaminoethane based ligands exhibited reduced activities and isoselectivities.     

Ring-Opening Polymerization of Cyclic Monomers with Aluminum Triflate

A green method for the controlled synthesis of aliphatic polymers is presented. The ring-opening polymerizations of cyclic monomers including several lactones, such as caprolactone (CL) or pentadecalactone (PDL), and cyclic anhydride monomers, such as succinic anhydride (SUC) and tetrahydrofuran (THF), catalyzed by a series of metal triflates (trifluoromethanesulfonate) were studied. Aluminum triflate was found to be an advantageous candidate to catalyze the ring-opening polymerization of cyclic monomers. The details of the ring-opening polymerization of CL catalyzed by aluminum triflate were studied. The maximum number average molecular weight (M_n), polydispersity (M_w/M_n) and yield of the obtained poly(-caprolactone) (PCL) at 60 °C for 6 hours were 18,400, 1.94 and 89 wt%, respectively. Those of poly(pentadecalactone) (PPDL) at 100 °C for 6 hours were 12,400, 2.24 and 49 wt%, respectively. The M_n, M_w/M_n and yield of the obtained poly(butylene succinate) (PBS) from SUC and THF at 100 °C for 48 hours were 4,900, 2.03 and 84 wt%, respectively. Furthermore, the mechanism of the polymerization was discussed based on the relationship between the conversion of CL and time. The molecular weight buildup of PCL was linear with a conversion in 50 min before the conversion reached 100 % and with M_w/M_n stabilized at about 1.5. The M_w/M_n of PCL then gradually increased. From these data, a living polymerization with a small transesterification was suggested from the PCL polymerization by aluminum triflate.     

Lewis‐Acid‐Mediated Stereospecific Radical Polymerization of Acrylimides Bearing Chiral Oxazolidinones

Lewis acid (MgBr₂)‐catalyzed radical polymerization of acrylimides bearing chiral oxazolidinones gave highly isotactic polyacrylimides with up to >99 % meso tetrad (mmm) selectivity. Polymerization in the absence of Lewis acid gave atactic polymers with 80 % racemo diad (r) selectivity; the selectivity was deliberately tuned from 80 % r to >99 % mmm by varying the polymerization conditions. The polyacrylimide was quantitatively converted to corresponding polyacrylates while preserving the stereoregularity, thus providing a general method for the synthesis of atactic to isotactic polyacrylates.     

Peculiarities of Ethylene Polymerization Reactions with Heterogeneous Ziegler–Natta Catalysts: Kinetic Analysis

The previously developed kinetic scheme for olefin polymerization reactions with heterogeneous Ziegler–Natta catalysts states that the catalysts have several types of active centers which have different activities, different stabilities, produce different types of polymer materials, and respond differently to reaction conditions. In the case of ethylene polymerization reactions, each type of center exhibits an unusual chemical feature: a growing polymer chain containing one ethylene unit, Ti—C₂H₅, is unusually stable and can decompose with the formation of the Ti—H bond. This paper examines quantitative kinetic ramifications of this chemical mechanism. Modeling of the complex kinetics scheme described in the Scheme demonstrates that it correctly and quantitatively predicts three most significant peculiarities of ethylene polymerization reactions, the high reaction order with respect to the ethylene concentration, reversible poisoning with hydrogen, and activation in the presence of α‐olefins.     

开环聚合-固相缩聚法制备立体嵌段聚乳酸

首先,采用乳酸为引发剂,辛酸亚锡为催化剂,引发丙交酯开环聚合制得具有缩聚活性的L-聚乳酸和D-聚乳酸;然后,将两者熔融共混后进行固相缩聚,合成了一系列立体嵌段聚乳酸。采用核磁共振(NMR)、凝胶渗透色谱(GPC)及差示扫描量热仪(DSC)分析了产物的链结构、重均分子量、热性能,并探讨了均相晶体和立体复合晶体共存情况下的固相缩聚机理。结果表明,固相缩聚产物分子量增长的适宜反应条件为:反应时间30h,较低的催化剂含量,L-聚乳酸质量分数为80%。L-聚乳酸和D-聚乳酸共混物较低的初始立体复合晶体结晶度有利于后续固相缩聚过程中产物分子量的增长;固相缩聚不仅发生在异链之间,而且也发生在同链之间。     

Synthetic and Mechanistic Aspects of the Immortal Ring‐Opening Polymerization of Lactide and Trimethylene Carbonate with New Homo‐ and Heteroleptic Tin(II)‐Phenolate Catalysts

Several new heteroleptic Sn^II complexes supported by amino‐ether phenolate ligands [Sn{LOⁿ}(Nu)] (LO¹=2‐[(1,4,7,10‐tetraoxa‐13‐azacyclopentadecan‐13‐yl)methyl]‐4,6‐di‐tert‐butylphenolate, Nu=NMe₂ ( 1 ), N(SiMe₃)₂ ( 3 ), OSiPh₃ ( 6 ); LO²=2,4‐di‐tert‐butyl‐6‐(morpholinomethyl)phenolate, Nu=N(SiMe₃)₂ ( 7 ), OSiPh₃ ( 8 )) and the homoleptic Sn{LO¹}₂ ( 2 ) have been synthesized. The alkoxy derivatives [Sn{LO¹}(OR)] (OR=OiPr ( 4 ), (S)‐OCH(CH₃)CO₂iPr ( 5 )), which were generated by alcoholysis of the parent amido precursor, were stable in solution but could not be isolated. [Sn{LO¹}]⁺[H₂N{B(C₆F₅)₃}₂]^? ( 9 ), a rare well‐defined, solvent‐free tin cation, was prepared in high yield. The X‐ray crystal structures of compounds 3 , 6 , and 8 were elucidated, and compounds 3 , 6 , 8 , and 9 were further characterized by ¹¹⁹Sn Mössbauer spectroscopy. In the presence of iPrOH, compounds 1 – 5 , 7 , and 9 catalyzed the well‐controlled, immortal ring‐opening polymerization (iROP) of L ‐lactide (L ‐LA) with high activities (ca. 150–550 mol_L?LA mol_Sn^?1 h^?1) for tin(II) complexes. The cationic compound 9 required a higher temperature (100 °C) than the neutral species (60 °C); monodisperse poly(L ‐LA)s were obtained in all cases. The activities of the heteroleptic pre‐catalysts 1 , 3 , and 7 were virtually independent of the nature of the ancillary ligand, and, most strikingly, the homoleptic complex 2 was equally competent as a pre‐catalyst. Polymerization of trimethylene carbonate (TMC) occurs much more slowly, and not at all in the presence of LA; therefore, the generation of PLA‐PTMC copolymers is only possible if TMC is polymerized first. Mechanistic studies based on ¹H and ¹¹⁹Sn{¹H} NMR spectroscopy showed that the addition of an excess of iPrOH to compound 3 yielded a mixture of compound 4 , compound [Sn(OiPr)₂]_n 10 , and free {LO¹}H in a dynamic temperature‐dependent and concentration‐dependent equilibrium. Upon further addition of L ‐LA, two active species were detected, [Sn{LO¹}(OPLLA)] ( 12 ) and [Sn(OPLLA)₂] ( 14 ), which were also in fast equilibrium. Based on assignment of the ¹¹⁹Sn{¹H} NMR spectrum, all of the species present in the ROP reaction were identified; starting from either the heteroleptic ( 1 , 3 , 7 ) or homoleptic ( 2 ) pre‐catalysts, both types of pre‐catalysts yielded the same active species. The catalytic inactivity of the siloxy derivative 6 confirmed that ROP catalysts of the type 1 – 5 could not operate according to an activated‐monomer mechanism. These mechanistic studies removed a number of ambiguities regarding the mechanism of the (i)ROPs of L ‐LA and TMC promoted by industrially relevant homoleptic or heteroleptic Sn^II species.     

A Functionalized Cyclic Lactide Monomer for Synthesis of Water‐Soluble Poly(Lactic Acid) and Amphiphilic Diblock Poly(Lactic Acid)

Biodegradable and bioabsorbable poly(lactic acid)s are one of the most important biomedical materials. However, it is difficult to introduce the functional groups into poly(lactic acid)s in order to improve their hydrophilicity and degradation rate. Here the authors describe the synthesis of functionalized cyclic lactide monomer 3,6‐bis(benzyloxymethyl)‐1,4‐dioxane‐2,5‐dione (BnLA) using an advanced synthetic route. Water‐soluble hydroxyl‐functionalized homopoly(lactic acid) (P(OH)LA) is synthesized via ring‐opening polymerization (ROP) of BnLA, followed by a hydrogenolytic deprotection reaction. Amphiphilic diblock poly(lactic acid) (P(OH)LA‐PLA) is synthesized via ROP of DL‐lactide using PBnLA as an initiator, followed by a hydrogenolytic deprotection reaction. P(OH)LA‐PLA is able to form polymeric micelles with the diameter of sub‐100 nm.

     

Isotactic rac‐Lactide Polymerization with Copper Complexes: The Influence of Complex Nuclearity

Diiminopyrrolide copper alkoxide complexes, LCuOR (OR¹=N,N‐dimethylamino ethoxide, OR²=2‐pyridyl methoxide), are active for the polymerization of rac‐lactide at ambient temperature in benzene to yield polymers with M_w/M_n=1.0–1.2. X‐ray diffraction studies showed bridged dinuclear complexes in the solid state for both complexes. While LCuOR¹ provided only atactic polylactide, LCuOR² produced partially isotactic polylactide (P_m=0.7). The difference in stereocontrol is attributed to a dinuclear active species for LCuOR² in contrast to a mononuclear species for LCuOR¹.     

Polymerization of lactic <Emphasis Type="Italic">O</Emphasis>-carboxylic anhydride using organometallic catalysts

The ring-opening polymerization of 5-methyl-1,3-dioxolane-2,4-dione(lactic O-carboxylic anhydride,LacOCA) using organometallic complexes,including Co(Ⅲ) complexes with Schiff base ligands,Tin(Ⅱ) alphatates and Al(Ⅲ) complexes with Schiff base ligands,was explored.The polymerization was carried out by treatment of the organometallic complexes with LacOCA in toluene under mild conditions.The corresponding poly(lactic acid) was characterized by spectroscopy and thermal analyses,which revealed insight into the structure of the effective catalyst for the polymerization of LacOCA.     

Recent Advances in Metal-Mediated Stereoselective Ring-Opening Polymerization of Functional Cyclic Esters towards Well-Defined Poly(hydroxy acid)s: From Stereoselectivity to Sequence-Control

Poly(hydroxy acid)s are a family of biocompatible and (bio)degradable polyesters with various outcomes in different domains of application. To date, poly(hydroxy acid)s are best prepared by ring-opening polymerization (ROP) of the corresponding cyclic esters. Using racemic chiral monomers featuring side-chain groups enables to access, providing a stereoselective catalyst/initiator system is implemented, stereoregular functional polymers, thereby improving their physico–chemical properties, and ultimately, widening their range of uses. Here, we highlight a few important advances in metal-mediated stereoselective ROP of cyclic esters towards the synthesis of (functional) stereoregular poly(hydroxy acid)s that have recently been disclosed, emphasizing on (functional) β- and γ-lactones, diolide and O-carboxyanhydride (OCA) monomers and yttrium-based catalysis. Fine-tuning of the substituents flanked on the catalyst ligand enables reaching poly(hydroxy acid)s with syndiotactic and also isotactic microstructures. The stereocontrol mechanisms at work and their probable origin, relying on steric but also electronic factors imparted in particular by the ligand substituents, are discussed. Taking advantage of such stereoselective ROPs, original copoly(hydroxy acid)s with gradient or alternated patterns then become accessible from the use of mixtures of chemically different, oppositely configured enantiopure monomers.     

Latent Olefin Metathesis Catalysts for Polymerization of DCPD

Summary: Advances in design of latent ruthenium phenylindenylidene catalysts bearing salicylaldimine ligands for ring-opening metathesis polymerization are described. The presence of the substituents in ortho position in N-aryl ring of salicylaldimine ligand has been found to be the main factor determining the catalyst stability. The best of the studied catalysts after acid activation offers activity comparable to that of the dichloride systems in ring-opening metathesis polymerization of DCPD, while maintaining very high stability in the monomer solution.     

稀土固体超强酸so2-4/tio2-ce4+直接法催化合成聚乳酸

滴定沉淀法制备了SO42-/TiO2-Ce4 稀土固体超强酸催化剂,得到了可作为直接法合成聚乳酸催化剂的制备工艺:硫酸浸渍浓度1.0 mol/L,Ce4 浓度0.08 mol/L,浸渍时间10 h,焙烧温度500℃,焙烧时间3 h,并将该固体超强酸催化剂用于直接催化合成聚乳酸。考察了聚合温度、聚合时间、催化剂用量及聚合压力对聚乳酸合成的影响,得到了最佳工艺条件为:催化剂用量为乳酸质量的0.174%,先在120℃,2 000 Pa下预聚5 h,然后在180℃,1 000 Pa下聚合15 h,最后在120℃,500 Pa下聚合20 h,得到的聚乳酸分子量为1.39×104。