Highly Efficient CSeCF3 Coupling of Aryl Iodides Enabled by an Air‐Stable Dinuclear PdI Catalyst

Building on our recent disclosure of catalysis at dinuclear Pd^I sites, we herein report the application of this concept to the realization of the first catalytic method to convert aryl iodides into the corresponding ArSeCF₃ compounds. Highly efficient C? SeCF₃ coupling of a range of aryl iodides was achieved, enabled by an air‐, moisture‐, and thermally stable dinuclear Pd^I catalyst. The novel SeCF₃‐bridged dinuclear Pd^I complex 3 was isolated, studied for its catalytic competence and shown to be recoverable. Experimental and computational data are presented in support of dinuclear Pd^I catalysis.     

Site‐Selective C−S Bond Formation at C−Br over C−OTf and C−Cl Enabled by an Air‐Stable,Easily Recoverable,and Recyclable Palladium(I) Catalyst

This report widens the repertoire of emerging Pd^I catalysis to carbon–heteroatom, that is, C?S bond formation. While Pd⁰‐catalyzed protocols may suffer from the formation of poisonous sulfide‐bound off‐cycle intermediates and lack of selectivity, the mechanistically diverse Pd^I catalysis concept circumvents these challenges and allows for C?S bond formation (S–aryl and S–alkyl) of a wide range of aryl halides. Site‐selective thiolations of C?Br sites in the presence of C?Cl and C?OTf were achieved in a general and a priori predictable fashion. Computational, spectroscopic, X‐ray, and reactivity data support dinuclear Pd^I catalysis to be operative. Contrary to air‐sensitive Pd⁰, the active Pd^I species was easily recovered in the open atmosphere and subjected to multiple rounds of recycling.     

Site‐Selective C−S Bond Formation at C−Br over C−OTf and C−Cl Enabled by an Air‐Stable,Easily Recoverable,and Recyclable Palladium(I) Catalyst

This report widens the repertoire of emerging Pd^I catalysis to carbon–heteroatom, that is, C−S bond formation. While Pd⁰‐catalyzed protocols may suffer from the formation of poisonous sulfide‐bound off‐cycle intermediates and lack of selectivity, the mechanistically diverse Pd^I catalysis concept circumvents these challenges and allows for C−S bond formation (S–aryl and S–alkyl) of a wide range of aryl halides. Site‐selective thiolations of C−Br sites in the presence of C−Cl and C−OTf were achieved in a general and a priori predictable fashion. Computational, spectroscopic, X‐ray, and reactivity data support dinuclear Pd^I catalysis to be operative. Contrary to air‐sensitive Pd⁰, the active Pd^I species was easily recovered in the open atmosphere and subjected to multiple rounds of recycling.     

Pd‐Catalyzed Decarboxylative Cross‐Coupling of 2‐Carboxyazine N‐Oxides with Various (Hetero)aryl Halides

Decarboxylative cross‐coupling reactions of substituted 2‐carboxyazine N‐oxides, with a variety of (hetero)aryl halides, by bimetallic Pd⁰/Cu^I and Pd⁰/Ag^I catalysis are reported. Two possible pathways, a conventional bimetallic‐catalyzed decarboxylative arylation, as well as a protodecarboxylative/direct C?H arylation sequence have been considered. These methods provide the first general decarboxylative arylation methodology for the 2‐carboxyazine series.     

Palladium‐mediated Cleavage of S–C Bonds: Preparation and Characterization of Palladium(II) Complexes of 2, 6‐Diformyl‐4‐tert‐butylthiophenol Dioxime

The synthesis of air‐sensitive 2, 6‐diformyl‐4‐tert‐butylthiophenol dioxime H₃L3 was achieved by a Pd‐mediated S–C cleavage of the corresponding S‐tert‐butyl protected thioether. The novel ligand forms a dinuclear, neutral Pd^II₂ complex, which is stabilized by two N ··· HO hydrogen bonds to give a pseudo‐macrocyclic structure. The crystal structure of a Pd^II complex of an oxidized isothiazole derivative of H₃L3 is also reported.     

Well‐Defined Dinuclear Gold Complexes for Preorganization‐Induced Selective Dual Gold Catalysis

The synthesis, reactivity, and potential of well‐defined dinuclear gold complexes as precursors for dual gold catalysis are explored. Using the preorganizing abilities of the ditopic PN^HP^iPr ( L^H ) ligand, dinuclear Au^I–Au^I complex 1 and mixed‐valent Au^I–Au^III complex 2 provide access to structurally characterized chlorido‐bridged cationic species 3 and 4 upon halide abstraction. For 2 , this transformation involves unprecedented two‐electron oxidation of the redox‐active ligand, generating a highly rigidified environment for the Au₂ core. Facile reaction with phenylacetylene affords the σ,π‐activated phenylacetylide complex 5 . When applied in the dual gold heterocycloaddition of a urea‐functionalized alkyne, well‐defined precatalyst 3 provides high regioselectivities for the anti‐Markovnikov product, even at low catalyst loadings, and outperforms common mononuclear Au^I systems. This proof‐of‐concept demonstrates the benefit of preorganization of two gold centers to enforce selective non‐classical σ,π‐activation with bifunctional substrates.     

Short Syntheses of 4‐Deoxycarbazomycin B,Sorazolon E,and (+)‐Sorazolon E2

Short syntheses of 4‐deoxycarbazomycin B and sorazolon E were established through the condensation of cyclohexanone and commercially available 4‐methoxy‐2,3‐dimethylaniline, followed by Pd^II‐catalyzed dehydrogenative aromatization/intramolecular C−C bond coupling and deprotection. A chiral dinuclear vanadium complex (R _a,S,S )‐ 6 mediated the enantioselective oxidative coupling of sorazolon E, affording (+)‐sorazolon E2 in good enantioselectivity.     

Chemo‐ and Enantioselective Oxidative α‐Azidation of Carbonyl Compounds

We report high‐performance I⁺/H₂O₂ catalysis for the oxidative or decarboxylative oxidative α‐azidation of carbonyl compounds by using sodium azide under biphasic neutral phase‐transfer conditions. To induce higher reactivity especially for the α‐azidation of 1,3‐dicarbonyl compounds, we designed a structurally compact isoindoline‐derived quaternary ammonium iodide catalyst bearing electron‐withdrawing groups. The nonproductive decomposition pathways of I⁺/H₂O₂ catalysis could be suppressed by the use of a catalytic amount of a radical‐trapping agent. This oxidative coupling tolerates a variety of functional groups and could be readily applied to the late‐stage α‐azidation of structurally diverse complex molecules. Moreover, we achieved the enantioselective α‐azidation of 1,3‐dicarbonyl compounds as the first successful example of enantioselective intermolecular oxidative coupling with a chiral hypoiodite catalyst.     

Divergent Reactivity of a Dinuclear (NHC)Nickel(I) Catalyst versus Nickel(0) Enables Chemoselective Trifluoromethylselenolation

We herein showcase the ability of NHC‐coordinated dinuclear Ni^I–Ni^I complexes to override fundamental reactivity limits of mononuclear (NHC)Ni⁰ catalysts in cross‐couplings. This is demonstrated with the development of a chemoselective trifluoromethylselenolation of aryl iodides catalyzed by a Ni^I dimer. A novel SeCF₃‐bridged Ni^I dimer was isolated and shown to selectively react with Ar−I bonds. Our computational and experimental reactivity data suggest dinuclear Ni^I catalysis to be operative. The corresponding Ni⁰ species, on the other hand, suffers from preferred reaction with the product, ArSeCF₃, over productive cross‐coupling and is hence inactive.     

Cu/Pd Synergistic Dual Catalysis: Asymmetric α‐Allylation of an α‐CF3 Amide

Despite the burgeoning demand for fluorine‐containing chemical entities, the construction of CF₃‐containing stereogenic centers has remained elusive. Herein, we report the strategic merger of Cu^I/base‐catalyzed enolization of an α‐CF₃ amide and Pd⁰‐catalyzed allylic alkylation in an enantioselective manner to deliver chiral building blocks bearing a stereogenic carbon center connected to a CF₃, an amide carbonyl, and a manipulable allylic group. The phosphine complexes of Cu^I and Pd⁰ engage in distinct catalytic roles without ligand scrambling to render the dual catalysis operative to achieve asymmetric α‐allylation of the amide. The stereoselective cyclization of the obtained α‐CF₃‐γ,δ‐unsaturated amides to give tetrahydropyran and γ‐lactone‐fused cyclopropane skeletons highlights the synthetic utility of the present catalytic method as a new entry to non‐racemic CF₃‐containing compounds.     

Arylation of Axially Chiral Phosphorothioate Salts by Dinuclear PdI Catalysis

S‐aryl phosphorothioates are privileged motifs in pharmaceuticals, agrochemicals, and catalysts; yet, the challenge of devising a straightforward synthetic route to enantioenriched S‐aryl phosphorothioates has remained unsolved to date. We demonstrate herein the first direct C?SP(=O)(OR′)(OR′′) coupling of diverse and chiral phosphorothioate salts with aryl iodides, enabled by an air‐ and moisture‐stable Pd^I dimer. Our mechanistic and computational data suggest distinct dinuclear Pd^I catalysis to be operative, which allows for operationally simple couplings with broad scope and full retention of stereochemistry.     

A Remarkable cis‐ and trans‐Spanning Dibenzylidene Acetone Diphosphine Chelating Ligand (dbaphos)

A multidentate and flexible diolefin–diphosphine ligand, based on the dibenzylidene acetone core, namely dbaphos ( 1 ), is reported herein. The ligand adopts an array of different geometries at Pt, Pd and Rh. At Pt^II the dbaphos ligand forms cis‐ and trans‐diphosphine complexes and can be defined as a wide‐angle spanning ligand. ¹H NMR spectroscopic analysis shows that the β‐hydrogen of one olefin moiety interacts with the Pt^II centre (an anagostic interaction), which is supported by DFT calculations. At Pd⁰ and Rh^I, the dbaphos ligand exhibits both olefin and phosphine interactions with the metal centres. The Pd⁰ complex of dbaphos is dinuclear, with bridging diphosphines. The complex exhibits the coordination of one olefin moiety, which is in dynamic exchange (intramolecular) with the other “free” olefin. The Pd⁰ complex of dbaphos reacts with iodobenzene to afford trans‐[Pd^II(dbaphos)I(Ph)]. In the case of Rh^I, dbaphos coordinates to form a structure in which the phosphine and olefin moieties occupy both axial and equatorial sites, which stands in contrast to a related bidentate olefin, phosphine ligand (“Lei” ligand), in which the olefins occupy the equatorial sites and phosphines the axial sites, exclusively.     

18F‐Labeling of Aryl‐SCF3, ‐OCF3 and ‐OCHF2 with [18F]Fluoride

We report that halogenophilic silver(I) triflate permits halogen exchange (halex) nucleophilic ¹⁸F‐fluorination of aryl‐OCHFCl, ‐OCF₂Br and ‐SCF₂Br precursors under mild conditions. This Ag^I‐mediated process allows for the first time access to a range of ¹⁸F‐labeled aryl‐OCHF₂, ‐OCF₃ and ‐SCF₃ derivatives, inclusive of [¹⁸F]riluzole. The ¹⁸F‐labeling of these medicinally important motifs expands the radiochemical space available for PET applications.     

A Tray‐Shaped,PdII‐Clipped Au3 Complex as a Scaffold for the Modular Assembly of [3×n] Au Ion Clusters

A tray‐shaped Pd^II₃Au^I₃ complex ( 1 ) is prepared from 3,5‐bis(3‐pyridyl)pyrazole by means of tricyclization with Au^I followed by Pd^II clipping. Tray 1 is an efficient scaffold for the modular assembly of [3×n] Au^I clusters. Treatment of 1 with the Au^I₃ tricyclic guest 2 in H₂O/CH₃CN (7:3) or H₂O results in the selective formation of a [3×2] cluster ( 1 ⋅ 2 ) or a [3×3] cluster ( 1 ⋅ 2 ⋅ 1 ), respectively. Upon subsequent addition of Ag^I ions, these complexes are converted to an unprecedented Au₃–Au₃–Ag–Au₃–Au₃ metal ion cluster.     

A Tray‐Shaped,PdII‐Clipped Au3 Complex as a Scaffold for the Modular Assembly of [3×n] Au Ion Clusters

A tray‐shaped Pd^II₃Au^I₃ complex ( 1 ) is prepared from 3,5‐bis(3‐pyridyl)pyrazole by means of tricyclization with Au^I followed by Pd^II clipping. Tray 1 is an efficient scaffold for the modular assembly of [3×n] Au^I clusters. Treatment of 1 with the Au^I₃ tricyclic guest 2 in H₂O/CH₃CN (7:3) or H₂O results in the selective formation of a [3×2] cluster ( 1 ? 2 ) or a [3×3] cluster ( 1 ? 2 ? 1 ), respectively. Upon subsequent addition of Ag^I ions, these complexes are converted to an unprecedented Au₃–Au₃–Ag–Au₃–Au₃ metal ion cluster.     

μ‐2,2′,6,6′‐Tetramethyl‐4,4′‐bipyridine‐κ2N1:N1′‐bis[(diethylenetriamine‐κ3N,N′,N′′)palladium(II)] tetranitrate

The title compound, [Pd₂(C₄H₁₃N₃)₂(C₁₄H₁₆N₂)](NO₃)₄, comprises discrete tetracationic dumbbell‐type dinuclear complex molecules and noncoordinating nitrate anions. Two Pd(dien)²⁺ moieties (dien is diethylenetriamine) are joined by the rigid linear exo‐bidentate bridging 2,2′,6,6′‐tetramethyl‐4,4′‐bipyridine ligand to form the dinuclear complex, which lies across a centre of inversion in the space group P2₁/n, so that the rings in the 2,2′,6,6′‐tetramethyl‐4,4′‐bipyridine bridging ligand are parallel. In the crystal, the primary and secondary amino groups of the dien ligand act as hydrogen‐bond donors towards the nitrate anions to form a three‐dimensional hydrogen‐bond network.     

Bis{μ‐3‐[3‐(2‐pyridyl)pyrazol‐1‐ylmethyl]pyridine}disilver(I) bis(trifluoromethanesulfonate): effect of counter‐anions on the self‐assembly of coordination complexes

As part of a study on the effect of different counter‐anions on the self‐assembly of coordination complexes, a new dinuclear Ag^I complex, [Ag₂(C₁₄H₁₂N₄)₂](CF₃SO₃)₂, with the 3‐[3‐(2‐pyridyl)pyrazol‐1‐ylmethyl]pyridine (L) ligand was obtained through the reaction of L with AgCF₃SO₃. In this complex, each Ag^I center in the centrosymmetric dinuclear complex cation is coordinated by two pyridine and one pyrazole N‐atom donor of two inversion‐related L ligands in a trigonal planar geometry. This forms a unique box‐like cyclic dimer with an intramolecular nonbonding Ag...Ag separation of 6.379 (7) Å. Weak Ag...CF₃SO₃ and C—H...X (X = O and F) hydrogen‐bonding interactions, together with π–π stacking interactions, link the complex cations along the [001] and [10] directions, respectively, generating two different one‐dimensional chains and then an overall two‐dimensional network of the complex running parallel to the (110) plane. Comparison of the structural differences with previous findings suggests that the presence of different counter‐anions plays an important role in the construction of such supramolecular frameworks.     

Palladium Catalysis for Aerobic Oxidation Systems Using Robust Metal–Organic Framework

Described here is a new and viable approach to achieve Pd catalysis for aerobic oxidation systems (AOSs) by circumventing problems associated with both the oxidation and the catalysis through an all‐in‐one strategy, employing a robust metal–organic framework (MOF). The rational assembly of a Pd^II catalyst, phenanthroline ligand, and Cu^II species (electron‐transfer mediator) into a MOF facilitates the fast regeneration of the Pd^II active species, through an enhanced electron transfer from in situ generated Pd⁰ to Cu^II, and then Cu^I to O₂, trapped in the framework, thus leading to a 10 times higher turnover number than that of the homogeneous counterpart for Pd‐catalyzed desulfitative oxidative coupling reactions. Moreover, the MOF catalyst can be reused five times without losing activity. This work provides the first exploration of using a MOF as a promising platform for the development of Pd catalysis for AOSs with high efficiency, low catalyst loading, and reusability.     

Visible‐Light‐Promoted Trifluoromethylthiolation of Styrenes by Dual Photoredox/Halide Catalysis

Herein, we report a new visible‐light‐promoted strategy to access radical trifluoromethylthiolation reactions by combining halide and photoredox catalysis. This approach allows for the synthesis of vinyl–SCF₃ compounds of relevance in pharmaceutical chemistry directly from alkenes under mild conditions with irradiation from household light sources. Furthermore, alkyl–SCF₃‐containing cyclic ketone and oxindole derivatives can be accessed by radical‐polar crossover semi‐pinacol and cyclization processes. Inexpensive halide salts play a crucial role in activating the trifluoromethylthiolating reagent towards photoredox catalysis and aid the formation of the SCF₃ radical.     

ESI‐MS studies of palladium (II) complexes with 1‐(p‐toluenesulfonyl)cytosine/cytosinato ligands

The mononuclear complex Pd(1‐TosC‐N3)₂Cl₂ (2) containing 1‐(p‐toluenesulfonyl)cytosine (1) as a ligand, as well as dinuclear complexes Pd₂(1‐TosC^?‐N3,N4)₄ (3) and Pd₂(1‐TosC^?‐N3,N4)₂DMSO₂Cl₂ (4) containing the ligand anion (1‐TosC^?), was mass analyzed by electrospray ionization ion trap MS/MS and high resolution MS. Complexes 3 and 4 were obtained by recrystallization of 2 from DMF and DMSO, respectively. The behavior of complex 2 in different solutions was monitored by electrospray ionization mass spectrometry (ESI‐MS). Under the applied ESI‐MS conditions, complex 2 in methanol reorganized itself dominantly as new complex 3 and the solvent did not coordinate the formed species. In H₂O/DMSO, CH₃CN/DMSO and CH₃OH/DMSO solutions, complex 2 formed several new species with solvent molecules involved in their structure, e.g. complex 4 was formed as the major product. The newly formed species were also examined by LC‐MS‐DAD, confirming the solvent induced reorganization and the solution instability of complex 2. Copyright © 2009 John Wiley & Sons, Ltd.