Seed‐Mediated Synthesis of Single‐Crystal Gold Nanospheres with Controlled Diameters in the Range 5–30 nm and their Self‐Assembly upon Dilution

Single‐crystal gold nanospheres with controlled diameters in the range 5–30 nm were synthesized by using a facile approach that was based on successive seed‐mediated growth. The key to the success of this synthesis was the use of hexadecyltrimethylammonium chloride (CTAC) as a capping agent and a large excess of ascorbic acid as a reductant to ensure fast reduction and, thus, single crystallinity and a spherical shape of the resultant nanoparticles. The diameters of the gold nanospheres could be readily controlled by varying the amount of seeds that were introduced into the reaction system. The gold nanospheres could be produced with uniform diameters of up to 30 nm; thus, their localized surface plasmon resonance properties could be directly compared with the results that were obtained from theoretical calculations. Interestingly, we also found that these gold nanospheres self‐assembled into dimers, larger aggregates, and wavy nanowires when they were collected by centrifugation, dispersed in deionized water, and then diluted to different volumes with deionized water.     

Electrochemical Aptasensor for the Determination of Cocaine Incorporating Gold Nanoparticles Modification

A novel electrochemical aptasensor incorporating a signal enhancement for the determination of cocaine was designed. Gold nanoparticles were self‐assembled onto the surface of a gold electrode through 1,6‐hexanedithiol. A bifunctional derivative of the 32‐base cocaine‐binding aptamer with a redox‐active ferrocene moiety and a thiol linker group at the termini of the strand was self‐assembled onto the surface of gold nanoparticles. The oxidation peak current is linearly related to the concentration of cocaine from 1.0 to 15.0 μM with a detection limit of 0.5 μM. It was found that the sensitivity of the aptasensor with gold nanoparticles modification was ca. 10‐fold higher than that of the aptasensor without gold nanoparticles modification. This work demonstrates that gold nanoparticles‐assembled gold electrode provides a promising platform for immobilizing aptamer and enhancing the sensitivity.     

Pluronics‐Stabilized Gold Nanoparticles: Investigation of the Structure of the Polymer–Particle Hybrid

Hybrid gold–polymer nanoparticles are obtained by self‐assembly of amphiphilic copolymers (Pluronics) in solutions containing preformed gold nanoparticles (diameter ca. 12 nm). Dynamic light scattering, TEM, cryo‐TEM, and small‐angle neutron scattering experiments with contrast variation are used to characterize the structure of the gold–polymer particles. Five Pluronics (F127, F68, F88, F108, P84) with different molecular weights and hydrophilic/hydrophobic balances are investigated. Gold nanoparticles are individually embedded within globules of polymer, even under conditions for which Pluronics micelles do not form in solution. The hybrid particles are several tens of nanometers in size (larger than micelles of the corresponding Pluronics), and the size can be tuned by changing the temperature.     

Amphiphilic Janus Gold Nanoparticles Prepared by Interface‐Directed Self‐Assembly: Synthesis and Self‐Assembly

Materials with Janus structures are attractive for wide applications in materials science. Although extensive efforts in the synthesis of Janus particles have been reported, the synthesis of sub‐10 nm Janus nanoparticles is still challenging. Herein, the synthesis of Janus gold nanoparticles (AuNPs) based on interface‐directed self‐assembly is reported. Polystyrene (PS) colloidal particles with AuNPs on the surface were prepared by interface‐directed self‐assembly, and the colloidal particles were used as templates for the synthesis of Janus AuNPs. To prepare colloidal particles, thiol‐terminated polystyrene (PS‐SH) was dissolved in toluene and citrate‐stabilized AuNPs were dispersed in aqueous solution. Upon mixing the two solutions, PS‐SH chains were grafted to the surface of AuNPs and amphiphilic AuNPs were formed at the liquid–liquid interface. PS colloidal particles decorated with AuNPs on the surfaces were prepared by adding the emulsion to excess methanol. On the surface, AuNPs were partially embedded in the colloidal particles. The outer regions of the AuNPs were exposed to the solution and were functionalized through the grafting of atom‐transfer radical polymerization (ATRP) initiator. Poly[2‐(dimethamino)ethyl methacrylate] (PDMAEMA) on AuNPs were prepared by surface‐initiated ATRP. After centrifugation and dissolving the colloidal particles in tetrahydrofuran (THF), Janus AuNPs with PS and PDMAEMA on two hemispheres were obtained. In acidic pH, Janus AuNPs are amphiphilic and are able to emulsify oil droplets in water; in basic pH, the Janus AuNPs are hydrophobic. In mixtures of THF/methanol at a volume ratio of 1:5, the Janus AuNPs self‐assemble into bilayer structures with collapsed PS in the interiors and solvated PDMAEMA at the exteriors of the structures.     

Reversible Assembly and Disassembly of Receptor‐Decorated Gold Nanoparticles Controlled by Ion Recognition

The controlled assembly of randomly dispersed colloidal particles can provide access to materials with advanced optical and electronic properties while providing fundamental insights into self‐assembly processes in nature and nanotechnology. Typically, self‐assembled nanoparticles are prepared by exploiting electrostatic interactions, lithographic techniques, and covalently linked molecular scaffolds. This results in static morphologies that cannot be disassembled easily. On the other hand, having access to systems that can be assembled or disassembled in a controlled manner could allow for in‐depth understanding of the nanoparticles as well as rational control over the morphology and fundamental properties of the resulting constructs. If the changes in aggregation are induced by a specific external chemical stimulus, it could also permit the development of new chemosensors. Here we demonstrate the reversible assembly and disassembly of gold nanoparticles achieved by modulating the noncovalent interactions between surface‐bound calix[4]pyrroles and added bis‐imidazolium cations. We also demonstrate the use of these nanoparticles in the selective sensing of anions.     

In Situ Synthesis of Self‐Assembled Gold Nanoparticles on Glass or Silicon Substrates through Reactive Inkjet Printing

A facile and low cost method for the synthesis of self‐assembled nanoparticles (NPs) with minimal size variation and chemical waste by using reactive inkjet printing was developed. Gold NPs with diameters as small as (8±2) nm can be made at low temperature (120 °C). The size of the resulting NPs can be readily controlled through the concentration of the gold precursor and oleylamine ink. The pure gold composition of the synthesized NPs was confirmed by energy‐dispersive X‐ray spectroscopy (EDXS) analysis. High‐resolution SEM (HRSEM) and TEM (HRTEM), and X‐ray diffraction revealed their size and face‐centered cubic (fcc) crystal structure, respectively. Owing to the high density of the NP film, UV/Vis spectroscopy showed a red shift in the intrinsic plasmonic resonance peak. We envision the extension of this approach to the synthesis of other nanomaterials and the production of tailored functional nanomaterials and devices.     

Synthesis and Characterization of Gold Nanoparticle‐Functionalized Ordered Mesoporous Materials

We report the synthesis and characterization of three different ordered mesoporous materials, labeled MCM‐48, SBA‐155, and SBA‐16 type materials, which were functionalized with gold nanoparticles using three different strategies. The functionalization strategies can be categorized as (i) in situ growth of gold nanoparticles, (ii) template loading, and (iii) diffusion loading of prefabricated gold nanoparticles. Two different particle sizes were employed in the latter two strategies, 5 nm and 10 nm. For all mesoporous structures, functionalization strategies, and particle sizes attempted, the materials retained their long‐range order upon incorporation of nanoparticles. From the adsorption isotherms, incorporation of gold nanoparticles altered the pore structure of the mesoporous support of some of the SBA‐15 and SBA‐16 type materials, with the effect on incorporation on the pore structure being particle size dependent in most cases. The majority of gold nanoparticles were found to reside on the external surface of the materials regardless of substrate and functionalization strategy; however, for the in situ synthesis and the template loading strategies, a significant fraction of the particles was determined to reside within the pore system of the material. In situ growth resulted in the highest content of gold nanoparticles in the solid phase. The relative effectiveness in retaining gold nanoparticles in the solid phase for each functionalization strategy was determined to be, in descending order, in situ synthesis, template loading, and diffusion loading.     

Synthesis of gold–poly(methyl methacrylate) core–shell nanoparticles by surface‐confined atom transfer radical polymerization at elevated temperature

Surface‐confined atom transfer radical polymerization was used to prepare gold nanoparticle–poly(methyl methacrylate) core–shell particles at elevated temperature. First, gold nanoparticles were prepared by the one‐pot borohydride reduction of tetrachloroaurate in the presence of 11‐mercapto‐1‐undecanol (MUD). MUD‐capped gold nanoparticles were then exchanged with 3‐mercaptopropyltrimethoxysilane (MPS) to prepare a self‐assembled monolayer (SAM) of MPS on the gold nanoparticle surfaces and subsequently hydrolyzed with hydrochloric acid. The extent of exchange of MUD with MPS was determined by NMR. The resulting crosslinked silica‐primer layer stabilized the SAM of MPS and was allowed to react with the initiator [(chloromethyl)phenylethyl] trimethoxysilane. Atom transfer radical polymerization was conducted on the Cl‐terminated gold nanoparticles with the CuCl/2,2′‐bipyridyl catalyst system at elevated temperature. The rates of polymerization with the initiator‐modified gold nanoparticles exhibited first‐order kinetics with respect to the monomer, and the number‐average molecular weight of the cleaved graft polymer increased linearly with the monomer conversion. The presence of the polymer on the gold nanoparticle surface was identified by Fourier transform infrared spectroscopy and transmission electron microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3631–3642, 2005     

High‐Yield Excited Triplet States in Pentacene Self‐Assembled Monolayers on Gold Nanoparticles through Singlet Exciton Fission

One of the major drawbacks of organic‐dye‐modified self‐assembled monolayers on metal nanoparticles when employed for efficient use of light energy is the fact that singlet excited states on dye molecules can be easily deactivated by means of energy transfer to the metal surface. In this study, a series of 6,13‐bis(triisopropylsilylethynyl)pentacene–alkanethiolate monolayer protected gold nanoparticles with different particle sizes and alkane chain lengths were successfully synthesized and were employed for the efficient generation of excited triplet states of the pentacene derivatives by singlet fission. Time‐resolved transient absorption measurements revealed the formation of excited triplet states in high yield (172±26 %) by suppressing energy transfer to the gold surface.     

Direct Cytosolic Delivery of siRNA Using Nanoparticle‐Stabilized Nanocapsules

The use of nanoparticle‐stabilized nanocapsules (NPSCs) for the direct cytosolic delivery of siRNA is reported. In this approach, siRNA is complexed with cationic arginine‐functionalized gold nanoparticles by electrostatic interactions, with the resulting ensemble self‐assembled onto the surface of fatty acid nanodroplets to form a NPSC/siRNA nanocomplex. The complex rapidly delivers siRNA into the cytosol through membrane fusion, a mechanism supported by cellular uptake studies. Using destabilized green fluorescent protein (deGFP) as a target, 90 % knockdown was observed in HEK293 cells. Moreover, the delivery of siRNA targeting polo‐like kinase 1 (siPLK1) efficiently silenced PLK1 expression in cancer cells with concomitant cytotoxicity.     

Polyrotaxane‐Mediated Self‐Assembly of Gold Nanospheres into Fully Reversible Supercrystals

The use of a thiol‐functionalized nonionic surfactant to stabilize spherical gold nanoparticles in water induces the spontaneous formation of polyrotaxanes at the nanoparticle surface in the presence of the macrocycle α‐cyclodextrin. Whereas using an excess of surfactant an amorphous gold nanocomposite is obtained, under controlled drying conditions the self‐assembly between the surface supramolecules provides large and homogenous supercrystals with hexagonal close packing of nanoparticles. Once formed, the self‐assembled supercrystals can be fully redispersed in water. The reversibility of the crystallization process may offer an excellent reusable material to prepare gold nanoparticle inks and optical sensors with the potential to be recovered after use.     

Helical Packing of Nanoparticles Confined in Cylindrical Domains of a Self‐Assembled Block Copolymer Structure

Theoretical models predict that a variety of self‐assembled structures of closely packed spherical particles may result when they are confined in a cylindrical domain. In the present work we demonstrate for the first time that the polymer‐coated nanoparticles confined in the self‐assembled cylindrical domains of a block copolymer pack in helical morphology, where we can isolate individual fibers filled with helically arranged nanoparticles. This finding provides unique possibilities for fundamental as well as application‐oriented research in similar directions.     

Fabrication of Multiresponsive Bioactive Nanocapsules through Orthogonal Self‐Assembly

Multifunctional self‐assembled systems present platforms for fundamental research and practical applications as they provide tunability of structure, functionality, and stimuli responsiveness. Pragmatic structures for biological applications have multiple design requirements, including control of size, stability, and environmental response. Here we present the fabrication of multifunctional nanoparticle‐stabilized capsules (NPSCs) by using a set of orthogonal supramolecular interactions. In these capsules, fluorescent proteins are attached to quantum dots through polyhistidine coordination. These anionic assemblies interact laterally with cationic gold nanoparticles that are anchored to the fatty acid core through guanidinium–carboxylate interactions. The lipophilic core then provides a reservoir for hydrophobic endosome‐disrupting agents, thereby generating a system featuring stimuli‐responsive release of a payload into the cytosol with fluorescence monitoring.     

Self‐Propelled Janus Mesoporous Silica Nanomotors with Sub‐100 nm Diameters for Drug Encapsulation and Delivery

The synthesis of an innovative self‐propelled Janus nanomotor with a diameter of about 75 nm that can be used as a drug carrier is described. The Janus nanomotor is based on mesoporous silica nanoparticles (MSNs) with chromium/platinum metallic caps and propelled by decomposing hydrogen peroxide to generate oxygen as a driving force with speeds up to 20.2 μm s^?1 (about 267 body lengths per second). The diffusion coefficient (D) of nanomotors with different H₂O₂ concentrations is calculated by tracking the movement of individual particles recorded by means of a self‐assembled fluorescence microscope and is significantly larger than free Brownian motion. The traction of a single Janus MSN nanomotor is estimated to be about 13.47×10^?15 N. Finally, intracellular localization and drug release in vitro shows that the amount of Janus MSN nanomotors entering the cells is more than MSNs with same culture time and particle concentrations, meanwhile anticancer drug doxorubicin hydrochloride loaded in Janus MSNs can be slowly released by biodegradation of lipid bilayers in cells.     

Near‐Infrared‐Activated Nanocalorifiers in Microcapsules: Vapor Bubble Generation for In Vivo Enhanced Cancer Therapy

Photothermal therapy based on gold nanostructures has been widely investigated as a state‐of‐the‐art noninvasive therapy approach. Because single nanoparticles cannot harvest sufficient energy, self‐assemblies of small plasmonic particles into large aggregates are required for enhanced photothermal performance. Self‐assembled gold nanorods in lipid bilayer‐modified microcapsules are shown to localize at tumor sites, generate vapor bubbles under near‐infrared light exposure, and subsequently damage tumor tissues. The polyelectrolyte multilayer enables dense packing of gold nanorods during the assembly process, which leads to the formation of vapor bubbles around the excited capsules. The resulting vapor bubbles achieve a high efficiency of suppressing tumor growth compared to single gold nanorods. In vivo experiments demonstrated the ability of soft‐polymer multilayer microcapsules to cross the biological barriers of the body and localize at target tissues.     

Anisotropic Self‐Assembly of Citrate‐Coated Gold Nanoparticles on Fluidic Liposomes

The behavior of self‐assembly processes of nanoscale particles on plasma membranes can reveal mechanisms of important biofunctions and/or intractable diseases. Self‐assembly of citrate‐coated gold nanoparticles (cAuNPs) on liposomes was investigated. The adsorbed cAuNPs were initially fixed on the liposome surfaces and did not self‐assemble below the phospholipid phase transition temperature (T_m). In contrast, anisotropic cAuNP self‐assembly was observed upon heating of the composite above the T_m, where the phospholipids became fluid. The number of self‐assembled NPs is conveniently controlled by the initial mixing ratio of cAuNPs and liposomes. Gold nanoparticle protecting agents strongly affected the self‐assembly process on the fluidic membrane.     

组装在贵金属基底上的金纳米粒子对CO的电化学催化氧化

研究了组装在Au, Pt电极表面的金纳米粒子对CO的电化学催化氧化行为, 首次在实验上观察到较大粒径金纳米粒子(粒径＞10 nm)对CO的电催化氧化活性. 考察了金粒子表面金氧化物对粒子电催化活性的影响, 发现表面金氧化物的形成是金纳米粒子对CO具有电催化氧化活性的前提. 对于相同粒径的金纳米粒子, 随着粒子表面金氧化物量的增加,催化活性增大.     

Electrochemical Fabrication of Nanostructured Surfaces for Enhanced Response

The objective of this work is to explore approaches to enhance electrochemical signals through sequential deposition and capping of gold particles. Gold nanoparticles are electrodeposited from KAuCl₄ solution under potentiostatic conditions on glassy carbon substrates. The number density of the nanoparticles is increased by multiple deposition steps. To prevent secondary nucleation processes, the nanoparticles are isolated after each potentiostatic deposition step by self‐assembled monolayers (SAMs) of decanethiol or mercaptoethanol. The increasing number of particles during five deposition/protection rounds is monitored by assembling electroactive SAMs using a ferrocene‐labeled alkanethiol. A precise estimation of the surface area of the gold nanoparticles by formation of an oxide layer on gold is difficult due to oxidation of the glassy carbon surface. As an alternative approach, the charge flow of the electroactive SAM is used for surface measurement of the gold surface area. A sixfold increase in the redox signal in comparison to a bulk gold surface is observed, and this increase in redox signal is particularly notable given that the surface area of the deposited nanoparticles is only a fraction of the bulk gold surface. After five rounds of deposition there is a gold loading of 1.94 μg cm^?2 of the deposited nanoparticles as compared to 23.68 μg cm^?2 for the bulk gold surface. Remarkably, however, the surface coverage of the ferrocene alkanethiol on the bulk material is only 10 % of that achieved on the deposited nanoparticles. This enhancement in signal of the nanoparticle‐modified surface in comparison to bulk gold is thus demonstrated not to be attributable to an increase in surface area, but rather to the inherent properties of the surface atoms of the nanoparticles, which are more reactive than the surface atoms of the bulk material.     

Self‐Organized Nanocomposite of Gold Nanoparticles and π‐Electron Organic Molecules

Aggregates of gold nanoparticles were formed by simple addition of a dithiafulvene derivative (DF) to an acetonitrile solution containing gold ions. The discrete gold nanoparticles in the aggregates were separated by monolayers of oxidized DF. No aggregation was observed with the addition of poly(vinylpyrrolidone) (PVP), which acted as a strong stabilizer and inhibited self‐assembly of the gold nanoparticles. DF acted as a reducing agent for gold ions, a stabilizer, and a tether for the resulting gold nanoparticles. Intermolecular S···S interaction and Au–S bonds might be the driving force for the self‐assembly of the gold nanoparticles.     

Nanocomposites of polymers and metals or semiconductors: Historical background and optical properties

Upon transmission of visible light through composites comprising of a transparent polymer matrix with embedded particles, the intensity loss by scattering is substantially reduced for particle diameters below 50–100 nm (nanoparticles, nanosized particles). As a consequence, related materials (nanocomposites) have found particular interest in optical studies. The first part of this article deals with a historical survey on nanoparticles and nanocomposites and the importance of small particle sizes on their optical properties. The second part focuses on results from our laboratory concerning nanocomposites with extremely high or low refractive indices and dichroic nanocomposites and their application in bicolored liquid crystal displays (LCD). The inorganic colloids required for these studies (lead sulfide, iron sulfides, gold, and silver) were prepared in situ in presence of a polymer or isolated as redispersable metal colloids modified at the surface with a self‐assembled monolayer (SAM) of an alkanethiol. The nanocomposites themselves were finally obtained by coprecipitation, spin coating, solvent casting or melt extrusion, with poly(ethylene oxide), gelatin, poly(vinyl alcohol) and polyethylene as matrix polymers.