Catalyst‐Switchable Regiocontrol in the Direct Arylation of Remote C?H Groups in Pyrazolo[1,5‐a]pyrimidines

The regiodivergent palladium‐catalyzed C H arylation of pyrazolo[1,5‐a]pyrimidine has been achieved, wherein the switch in regioselectivity between positions C3 and C7 is under complete catalyst control. A phosphine‐containing palladium catalyst promotes the direct arylation at the most acidic position (C7), whereas a phosphine‐free catalyst targets the most electron‐rich position (C3).     

Chiral Palladacycle Catalysts Generated on a Single‐Handed Helical Polymer Skeleton for Asymmetric Arylative Ring Opening of 1,4‐Epoxy‐1,4‐dihydronaphthalene

Post‐polymerization C? H activation of poly(quinoxaline‐2,3‐diyl)‐based helically chiral phosphine ligands (PQXphos) with palladium(II) acetate afforded chiral phosphapalladacycles quantitatively. In situ generated palladacycles exhibited enantioselectivities up to 94 % ee in the palladium‐catalyzed asymmetric ring‐opening arylation of 1,4‐epoxy‐1,4‐dihydronaphthalenes with arylboronic acids.     

Programmed Site‐Selective Palladium‐Catalyzed Arylation of Thieno[3,2‐b]thiophene

Mono‐, di‐, tri‐, and tetraarylated thieno[3,2‐b ]thiophenes were synthesized by direct site‐selective Pd‐catalyzed C−H activation reactions with various aryl bromides in the presence of a phosphine‐free Pd(OAc)₂/KOAc catalyst system in N ,N ‐dimethylacetamide (DMAc). The arylation of 2‐arylthieno[3,2‐b ]thiophene took place at the C3 position if the 2‐aryl substituents possessed electron‐withdrawing groups and at the C5 position if they were bulky and possessed electron‐donating groups.     

Ligand‐Controlled α‐ and β‐Arylation of Acyclic N‐Boc Amines

The palladium‐catalyzed ligand‐controlled arylation of α‐zincated acyclic amines, obtained by directed α‐lithiation and transmetalation, is described. Whereas PtBu₃ gave rise to α‐arylated Boc‐protected amines, more flexible N‐phenylazole‐based phosphine ligands induced major β‐arylation through migrative cross‐coupling.     

An intramolecular N‐arylation approach to 3‐functionalized 4,9‐dihydropyrrolo[2,1‐b]quinazolines

A series of 4,9‐dihydropyrrolo[2,1‐b]quinazolines containing electron withdrawing groups at the 3‐position have been prepared by the palladium‐catalyzed intramolecular N‐arylation of some 2‐aminopyrroles having a 2‐bromobenzyl group at the N‐1 position. Important for success of the reaction is the use of X‐phos, a biphenyl mono‐phosphine ligand, instead of xantphos, a more standard diphosphine ligand, and the use of t‐BuOH as reaction solvent. J. Heterocyclic Chem., (2011).     

Photoluminescent and Liquid‐Crystalline Properties of Donor–Acceptor‐Type 2,5‐Diarylthiazoles

The synthesis of donor–acceptor‐type 2,5‐diarylthiazoles that bear electron‐donating N,N‐dialkylamine and electron‐withdrawing cyano groups at the 2‐ and 5‐position, respectively, were carried out with transition‐metal‐catalyzed C? H arylation reactions developed by us. The compounds were synthesized by the C? H arylation of unsubstituted thiazole at the 2‐position with a palladium/copper catalyst in the presence of tetrabutylammonium fluoride (TBAF) as an activator. Further C? H arylation of the 2‐arylated thiazole at the 5‐position was carried out by the palladium‐catalyzed reaction in the presence of silver(I) fluoride to afford the donor–acceptor‐type 2,5‐diarylthiazoles with N,N‐dialkylamine groups of different chain lengths. The UV/Vis absorption, photoluminescence, and electrochemical behavior were similar regardless of chain length, whereas liquid‐crystalline behavior and thermal characteristics were found to be dependent on the alkyl‐chain length. The compounds with N,N‐diethylamine or N‐butyl‐N‐methyl groups showed a stable liquid‐crystalline phase over a wide temperature range as well as higher stability to thermal decomposition.     

Heterogeneous Aromatic Amination of Aryl Halides with Arylamines in Water with PS‐PEG Resin‐Supported Palladium Complexes

Catalytic aromatic amination is achieved in water under heterogeneous conditions by the use of immobilized palladium complexes coordinated with the amphiphilic polystyrene‐poly(ethylene glycol) resin‐supported di(tert‐butyl)phosphine ligand. Aromatic amination of aryl halides with diphenylamine and N,N‐double arylation of anilines with bromobenzene were found to proceed in water with broad substrate tolerance to give the triarylamines in high yield with high recyclability of the polymeric catalyst beads. Very little palladium leached from the polymeric catalyst under the water‐based reaction conditions to provide a green and clean (metal‐uncontaminated) protocol for the preparation of triarylamines, including the optoelectronically active N,N,N′,N′‐tetraaryl‐1,1′‐biphenyl‐4,4′‐diamines (TPDs).     

SBA‐15‐functionalized melamine–pyridine group‐supported palladium(0) as an efficient heterogeneous and recyclable nanocatalyst for N‐arylation of indoles through Ullmann‐type coupling reactions

SBA‐15‐functionalized melamine–pyridine group‐supported palladium(0) was found to serve as a heterogeneous and recyclable nanocatalyst for N‐arylation of indoles with aryl iodides under a low catalyst loading (0.3 mol% of Pd) through Ullmann‐type C? N coupling reactions. A variety of aryl iodides could be aminated to provide the N‐arylated products in good to excellent yields without the need of an inert atmosphere. Also, this catalyst was found to be an efficient system for the N‐arylation of other nitrogen‐containing heterocycles with aryl iodides. The heterogeneous palladium catalyst could be recovered by simple filtration of the reaction solution and reused for six cycles without significant loss in its activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Environmentally‐Safe Conditions for a Palladium‐Catalyzed Direct C3‐Arylation with High Turn Over Frequency of Imidazo[1,2‐b]pyridazines Using Aryl Bromides and Chlorides

Pd(OAc)₂ was found to catalyze very efficiently the direct arylation of imidazo[1,2‐b]pyridazine at C3‐position under a very low catalyst loading and phosphine‐free conditions. The reaction can be performed in very high TOFs and TONs employing as little as 0.1–0.05 mol % catalyst using a wide range of aryl bromides. In addition, some electron‐deficient aryl chlorides were also found to be suitable substrates. Moreover, 31 examples of the cross couplings were reported using green, safe, and renewable solvents, such as pentan‐1‐ol, diethylcarbonate or cyclopentyl methyl ether, without loss of efficiency.     

Palladium‐catalyzed selective decarboxylative coupling reaction versus direct C―H arylation for arylation of heteroaromatics

Conditions for selective palladium‐catalyzed decarboxylative 2‐arylation of 3‐substituted thiophene and furan derivatives bearing an ester at C2 position have been established. By using 2 mol% phosphine‐free Pd(OAc)₂ as the catalyst and a mixture of KOH and K₂CO₃ as the bases, in dimethylacetamide, moderate to good yields of the desired 2‐arylated products were obtained. A range of functional groups such as nitrile, nitro, formyl or acetyl on the aryl bromides was tolerated. This method allows us to employ in some cases more convenient reactants in terms of cost or physical properties (boiling point) for arylations. Copyright © 2013 John Wiley & Sons, Ltd.     

Palladium on carbon‐catalyzed direct C—H arylation polycondensation of 3,4‐ethylenedioxythiophene with various dibromoarenes

We have demonstrated a direct arylation polycondensation of 3,4‐ethylenedioxythiophene with 2,7‐dibromo‐9,9‐dioctylfluorene using palladium on carbon (Pd/C) as a catalyst. Pd/C is a low‐cost solid‐supported palladium catalyst, giving one of the effective catalytic systems for direct arylation. The Pd/C‐catalyzed direct arylation polycondensation with acetic acid/potassium carbonate in N,N‐dimethylacetamide furnished a high molecular weight π‐conjugated alternating copolymer of EDOT‐fluorene (M_n = 89,300, M_w/M_n = 3.27) in high yield. The polycondensation of EDOT with various dibromoarenes was also achieved, giving EDOT‐carbazole, EDOT‐dialylamine, and EDOT‐bithiophene polymers. Optical and electrochemical properties of the polymers were also discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1183–1188     

Well‐Defined N‐Heterocyclic Carbene‐Palladium Complexes as Efficient Catalysts for Domino Sonogashira Coupling/Cyclization Reaction and C‐H bond Arylation of Benzothiazole

Well‐defined and air‐stable PEPPSI (Pyridine Enhanced Precatalyst Preparation Stabilization and Initiation) themed palladium bis‐N‐heterocyclic carbene complexes have been developed for the domino Sonogashira coupling/cyclization reaction of 2‐iodophenol with a variety of terminal alkynes and C‐H bond arylation of benzothiazole with aryl iodides. The PEPPSI themed palladium complexes, 2a and 2b were synthesized in good yields from the reaction of corresponding imidazolium salts with PdCl₂ and K₂CO₃ in pyridine. The new air‐stable palladium‐NHC complexes were characterized by NMR spectroscopy, X‐ray crystallography, elemental analysis, and mass spectroscopy studies. The PEPPSI themed palladium(II) bis‐N‐heterocyclic carbene complexes 2a and 2b exhibited excellent catalytic activities for domino Sonogashira coupling/cyclization reaction of 2‐iodophenol with terminal alkynes yielding benzofuran derivatives. In addition, the palladium complexes, 2a and 2b successfully catalyzed the direct C‐H bond arylation of benzothiazole with aryl iodides as coupling partners in presence of CuI as co‐catalyst.     

Pd‐ Dithizone grafted onto magnetic nanoparticles and study of its catalyticactivity in C‐C and C‐N coupling reactions

In this paper, we report a simple, facile and efficient method for the synthesis of Fe₃O₄/SiO₂‐DTZ‐Pd. The immobilized palladium was an efficient catalyst without addition of phosphine ligands for Stille, Heck and N‐arylation reactions. This method has some advantages such as high yields and easy work up of products. In addition, the catalyst can be recovered using a magnet and reused several times without significant loss of its catalytic activity. This catalyst was characterized by various physico‐chemical techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and inductively coupled plasma (ICP).     

Access to P‐ and Axially Chiral Biaryl Phosphine Oxides by Enantioselective CpxIrIII‐Catalyzed C−H Arylations

An enantioselective C?H arylation of phosphine oxides with o‐quinone diazides catalyzed by an iridium(III) complex bearing an atropchiral cyclopentadienyl (Cp^x) ligand and phthaloyl tert‐leucine as co‐catalyst is reported. The method allows access to a) P‐chiral biaryl phosphine oxides, b) atropo‐enantioselective construction of sterically demanding biaryl backbones, and also c) selective assembly of axial and P‐chiral compounds in excellent yields and diastereo‐ and enantioselectivities. Enantiospecific reductions provide monodentate chiral phosphorus(III) compounds having structures and biaryl backbones with proven importance as ligands in asymmetric catalysis.     

Through‐Space 1,4‐Palladium Migration and 1,2‐Aryl Shift: Direct Access to Dibenzo[a,c]carbazoles through a Triple CH Functionalization Cascade

A palladium‐catalyzed expeditious synthesis of dibenzofused carbazoles from readily available 2‐arylindoles and diaryliodonium salts is reported. Interestingly, after the electrophilic C3 palladation of indole, an unexpected “through‐space” 1,4‐palladium migration to the 2‐aryl moiety, by remote C?H bond activation followed by C?H arylation with diaryliodonium salt, and an unprecedented 1,2‐aryl shift take place. Finally, an intramolecular cross‐dehydrogenative coupling (CDC) at the C2 position affords dibenzo[a,c]carbazoles in high yields. Remarkably, the present migratory annulation occurs through three C?H bond activation one C?C bond cleavage, and the simultaneous construction of three new C?C bonds in a single operation.     

Synthesis of poly(ether ketone amide)s containing 4‐aryl‐2,6‐ diphenylpyridine moieties by a heterogeneous palladium‐catalyzed polycondensation of aromatic diiodides,aromatic diamines,and carbon monoxide

New aromatic poly(ether ketone amide)s containing 4‐aryl‐2,6‐diphenylpyridine units were prepared by the heterogeneous palladium‐catalyzed carbonylative polymerization of aromatic diiodides with ether ketone units, aromatic diamines bearing pyridine groups, and carbon monoxide. Polymerizations were performed in N,N‐dimethyl‐ acetamide (DMAc) at 120°C in the presence of a magnetic nanoparticles‐supported bidentate phosphine palladium complex [Fe₃O₄@SiO₂‐2P‐PdCl₂] as catalyst with 1,8‐diazabicycle[5,4,0]‐7‐undecene (DBU) as base and generated poly(ether ketone amide)s with inherent viscosities up to 0.79 dL/g. All the polymers were soluble in many organic solvents. These polymers showed glass transition temperatures between 219°C and 257°C and 10% weight loss temperatures ranging from 467°C to 508°C in nitrogen. These polyamides could be cast into transparent, flexible, and strong films from DMAc solution with tensile strengths of 86.4 to 113.7 MPa, tensile moduli of 2.34 to 3.19 GPa, and elongations at break of 5.2% to 6.9%. These polymers also exhibited good optical transparency with an ultraviolet‐visible absorption cut‐off wavelength in the 371 to 384‐nm range. Importantly, the new heterogeneous palladium catalyst can easily be recovered from the reaction mixture by simply applying an external magnet and recycled at least 8 times without significant loss of activity. Our catalytic system not only avoids the use of an excess of PPh₃ and prevents the formation of palladium black, but also solves the basic problems of palladium catalyst recovery and reuse.     

Palladium(II)‐N‐Heterocyclic Carbene Complexes: Efficient Catalysts for the Direct C‐H Bond Arylation of Furans with Aryl Halides

This paper contains the synthesis and characterization of the seven new benzimidazolium salts and their corresponding new palladium(II)‐NHC complexes with the general formula [PdX₂(NHC)₂], (NHC = N‐heterocyclic carbene, X = Cl or Br), and also their catalytic activity in direct C‐H bond arylation of 2‐substituted furan derivatives with aryl bromides and aryl chlorides. Under the optimal conditions, these palladium(II)‐NHC complexes showed the good catalytic performance for the direct C‐H bond arylation of 2‐substituted furans with (hetero)aryl bromides, and with readily available and inexpensive aryl chlorides. The C‐H bond arylation regioselectively produced C5‐arylated furans by using 1 mol% of the palladium(II)‐NHC catalysts in moderate to high yields.     

Immobilized Pd on (S)‐methyl histidinate‐modified multi‐walled carbon nanotubes: a powerful and recyclable catalyst for Mizoroki–Heck and Suzuki–Miyaura C–C cross‐coupling reactions in green solvents and under mild conditions

A stable and powerful heterogeneous palladium catalyst was synthesized using immobilized palladium on (S)‐methyl histidinate bonded onto the surface of multi‐walled carbon nanotubes. The catalyst was characterized using a combination of Fourier transform infrared and X‐ray photoelectron spectroscopies, transmission electron microscopy, X‐ray powder diffraction and inductively coupled plasma, thermogravimetric and elemental analyses. This new air‐ and moisture‐stable phosphine‐free palladium catalyst was found to be highly active and reusable in Mizoroki–Heck and Suzuki–Miyaura cross‐coupling reactions in poly(ethylene glycol) and aqueous ethanol as green solvents using an extremely small amount of palladium under mild conditions. Copyright © 2016 John Wiley & Sons, Ltd.     

Palladium‐Catalyzed C(sp3)H Activation: A Facile Method for the Synthesis of 3,4‐Dihydroquinolinone Derivatives

3,4‐Dihydroquinolinones were synthesized by the palladium‐catalyzed, oxidative‐addition‐initiated activation and arylation of inert C(sp³)? H bonds. Pd(OAc)₂ and P(o‐tol)₃ were used as the catalyst and ligand, respectively, to improve the efficiency of the reaction. A further advantage of this reaction is that it could be performed in air. A relatively rare seven‐membered palladacycle was proposed as a key intermediate of the catalytic cycle.     

Palladium‐Catalyzed C(sp3)H Arylation of N‐Boc Benzylalkylamines via a Deprotonative Cross‐Coupling Process

Diarylmethylamines are key intermediates and products in the pharmaceutical industry. Herein we disclose a novel method toward the synthesis of these important compounds via C?H functionalization. Presented is a reversible deprotonation of N‐Boc benzylalkylamines at the benzylic C?H with in situ arylation by a NiXantPhos‐based palladium catalyst (50–93 % yield, 29 examples). The method is also successful with N‐Boc‐tetrahydroisoquinolines. The advantages of this method are it avoids strong bases, low temperatures, and the need to transmetallate to main group metals for the coupling.