Tunable Self‐Assembly of Diblock Copolymers into Colloidal Particles with Triply Periodic Minimal Surfaces

We herein report the tunable self‐assembly of simple block copolymers, namely polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) diblock copolymers, into porous cubosomes with inverse or mesophases of controlled unit cell parameters as well as hexasomes with an inverse hexagonal (p 6mm ) structure, which have been rarely observed in polymer self‐assembly. A new morphological phase diagram was constructed for the solution self‐assembly of PS‐b‐PEO based on the volume fraction of the PS block against the initial copolymer concentration. The formation mechanisms of the cubosomes and hexasomes have also been revealed. This study not only affords a simple system for the controllable preparation and fundamental studies of ordered bicontinuous structures, but also opens up a new avenue towards porous architectures with highly ordered pores.     

Pincushion of Tubule Discovery and Tubular Morphology Landscape Establishment of Block Copolymer Self‐Assemblies

Block copolymer (BCP) self‐assembly is a versatile technique in the preparation of polymeric aggregates with varieties of morphologies. However, its morphology library is limited. Here, the discovery of pincushion of tubules is reported for the first time, via BCP self‐assembly of poly(4‐vinylpyridine)‐b‐polystyrene (P4VP‐b‐PS) with very high molecular weight (500 kDa) and asymmetry (2 mol% P4VP). The investigation confirms the importance of core‐forming block length on morphology control of BCP self‐assemblies, especially with respect to tubular structures. The morphology landscape of tubular structures is successfully established, where dumbbell of tubule, tubule, loose clew of tubules, tight clew of tubules, and pincushion of tubules can be prepared by adjusting the core‐forming block length. This work therefore expands the structure library of BCP self‐assemblies and opens up a new avenue for the further applications of these tubular materials.     

In Situ Visualization of Block Copolymer Self‐Assembly in Organic Media by Super‐Resolution Fluorescence Microscopy

Analytical methods that enable visualization of nanomaterials derived from solution self‐assembly processes in organic solvents are highly desirable. Herein, we demonstrate the use of stimulated emission depletion microscopy (STED) and single molecule localization microscopy (SMLM) to map living crystallization‐driven block copolymer (BCP) self‐assembly in organic media at the sub‐diffraction scale. Four different dyes were successfully used for single‐colour super‐resolution imaging of the BCP nanostructures allowing micelle length distributions to be determined in situ. Dual‐colour SMLM imaging was used to measure and compare the rate of addition of red fluorescent BCP to the termini of green fluorescent seed micelles to generate block comicelles. Although well‐established for aqueous systems, the results highlight the potential of super‐resolution microscopy techniques for the interrogation of self‐assembly processes in organic media.     

Effect of binary block‐selective solvents on self‐assembly of ABA triblock copolymer in dilute solution

We have studied the self‐assembly of the ABA triblock copolymer (P4VP‐b‐PS‐b‐P4VP) in dilute solution by using binary block‐selective solvents, that is, water and methanol. The triblock copolymer was first dissolved in dioxane to form a homogeneous solution. Subsequently, a given volume of selective solvent was added slowly to the solution to induce self‐assembly of the copolymer. It was found that the copolymer (P4VP₄₃‐b‐PS₃₆₆‐b‐P4VP₄₃) tended to form spherical aggregate or bilayer structure when we used methanol or water as the single selective solvent, respectively. However, the aggregates with various nanostructures were obtained by using mixtures of water and methanol as the block‐selective solvents. The aggregate structure changed from sphere to rod, vesicle, and then to bilayer by changing water content in the block‐selective solvent from 0 to 100%. Moreover, it was found that the vesicle size could be well controlled by changing the copolymer content in the solution. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1536–1545, 2008     

Recent advances in the solution self‐assembly of amphiphilic “rod‐coil” copolymers

Solution self‐assembly of amphiphilic “rod‐coil” copolymers, especially linear block copolymers and graft copolymers (also referred to as polymer brushes), has attracted considerable interest, as replacing one of the blocks of a coil‐coil copolymer with a rigid segment results in distinct self‐assembly features compared with those of the coil‐coil copolymer. The unique interplay between microphase separation of the rod and coil blocks with great geometric disparities can lead to the formation of unusual morphologies that are distinctly different from those known for coil‐coil copolymers. This review presents the recent achievements in the controlled self‐assembly of rod‐coil linear block copolymers and graft copolymers in solution, focusing on copolymer systems containing conjugated polymers, liquid crystalline polymers, polypeptides, and polyisocyanates as the rod segments. The discussions concentrate on the principle of controlling over the morphology of rod‐coil copolymer assemblies, as well as their distinctive optical and optoelectronic properties or biocompatibility and stimuli‐responsiveness, which afford the assemblies great potential as functional materials particularly for optical, optoelectronic and biological applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1459–1477     

Nanoparticle arrangements in block copolymer particles with microphase‐separated structures

In this study, metal‐polymer particles with microphase‐separated structures were prepared by self‐organized precipitation, where a good solvent is evaporated from a solution that also contains block copolymer, Au NPs, and a poor solvent. Control of the microphase‐separated structure in composite particles consisting of Au NPs and block copolymer was accomplished by changing the Au NP size, the mix ratio, and the copolymerization ratio of the block copolymer. The morphology of the inner structures was changed from a lamellar phase to a spherical phase by increasing the Au NP concentration. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Improved numerical algorithm for exploring block copolymer mesophases

We present an improved algorithm of the self‐consistent mean‐field implementation that has been recently proposed for the calculation of block copolymer self‐assembly. Without requiring prior knowledge of the symmetry of the mesophase segregation, the algorithm is numerically stable and significantly faster than previously proposed methods. These advantages provide a valuable tool for combinatorial screening of novel stable and metastable structural phases of block copolymers. We apply the method and demonstrate complex mesophases in linear, asymmetric triblock copolymer melts. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1777–1783, 2002     

Orthogonally Self‐Assembled Multifunctional Block Copolymers

We report the synthesis of telechelic poly(norbornene) and poly(cyclooctene) homopolymers by ring‐opening metathesis polymerization (ROMP) and their subsequent functionalization and block copolymer formation based on noncovalent interactions. Whereas all the poly(norbornene)s contain either a metal complex or a hydrogen‐bonding moiety along the polymer side‐chains, together with a single hydrogen‐bonding‐based molecular recognition moiety at one terminal end of the polymer chain. These homopolymers allow for the formation of side‐chain‐functionalized AB and ABA block copolymers through self‐assembly. The orthogonal natures of all side‐ and main‐chain self‐assembly events were demonstrated by ¹H NMR spectroscopy and isothermal titration calorimetry. The resulting fully functionalized block copolymers are the first copolymers combining both side‐ and main‐chain self‐assembly, thereby providing a high degree of control over copolymer functionalization and architecture and bringing synthetic materials one step closer to the dynamic self‐assembly structures found in nature.     

Structural analysis of linear/branched ethylene block copolymers

Chain shuttling polymerization has provided new pathway for introduction of different architectures in a single chain. Unlike the commercially available ethylene/1‐octene block copolymers, synthesis and microstructure of linear/branched polyethylene with blocky nature is not extensively studied. In this work, such block copolymers are synthesized based on reversible transfer of growing chains between an ansa metallocene and α‐diimine catalysts, forming linear and branched structures from ethylene, respectively. Investigation of thermal properties reveals that application of 550 equivalent of chain shuttling agent makes blocky structures that show the most deviation from the longstanding relationship between melting temperature and crystallinity or density, alongside with turning broad molecular distribution into unimodal. Thermal fractionation by successive self‐annealing demonstrates formation of broad distribution of linear blocks, as comprehended through appearance of uniform melting peaks at lower temperatures. Corresponding dynamic mechanical properties and crystalline structures reveal soft elastomeric properties, specifically at temperatures around −50°C, opposed to the purely linear chains or linear/branched blends. Correspondingly, blend samples demonstrate significant morphological change upon treatment with a suitable solvent for the branched fraction, contrary to the blocky microstructures.     

Giant Biodegradable Poly(ethylene glycol)‐block‐Poly(ε‐caprolactone) Polymersomes by Electroformation

Here, the formation of giant enzyme‐degradable polymersomes using the electroformation method is reported. Poly(ethylene glycol)‐block‐poly(ε‐caprolactone) polymersomes have been shown previously to be attractive candidates for the detection of bacterial proteases and protease mediated release of encapsulated reporter dyes and antimicrobials. To maximize the efficiency, the maximization of block copolymer (BCP) vesicle size without compromising their properties is of prime importance. Thus, the physical‐chemical properties of the BCP necessary to self‐assemble into polymeric vesicles by electroformation are first identified. Subsequently, the morphology of the self‐assembled structures is extensively characterized by different microscopy techniques. The vesicular structures are visualized for giant polymersomes by confocal laser scanning microscopy upon incorporation of reporter dyes during the self‐assembly process. Using time correlated single photon counting and by analyzing the fluorescence decay curves, the nanoenvironment of the encapsulated fluorophores is unveiled. Using this approach, the hollow core structure of the polymersomes is confirmed. Finally, the encapsulation of different dyes added during the electroformation process is studied. The results underline the potential of this approach for obtaining microcapsules for subsequent triggered release of signaling fluorophores or antimicrobially active cargo molecules that can be used for bacterial infection diagnostics and/or treatment.     

Ordering poly(trimethylsilyl styrene‐block‐D,L‐lactide) block copolymers in thin films by solvent annealing using a mixture of domain‐selective solvents

Controlling the morphology, domain orientation, and domain size of block copolymer (BCP) thin films is desirable for many applications in nanotechnology. These properties can be tuned during solvent annealing by varying the solvent choice and degree of swelling which affect the effective miscibility and volume fraction of the BCP domains. In this work, we demonstrate with a bulk lamellae‐forming BCP, poly(4‐trimethylsilylstyrene‐block‐D ,L ‐lactide) (PTMSS‐b‐PLA), that varying the composition of a mixture of solvent vapors containing cyclohexane (PTMSS‐selective) and acetone (PLA‐selective), enables formation of perpendicularly oriented lamellae with sub‐20‐nm pitch lines. The BCP domain periodicity was also observed to increase by 30%, compared to bulk, following solvent annealing. Furthermore, solvent annealing alone is shown to induce a transition from a disordered to an ordered BCP. We rationalize our observations by hypothesizing that the use of a combination of domain selective solvent mixtures serves to increase the effective repulsion between the blocks of the copolymer. We furnish results from self‐consistent field theory calculations to support the proposed mechanism. © 2013 Wiley Periodicals, Inc. J. Polym. Sci. Part B: Polym. Phys. 2014 , 52, 36–45     

Corannulene‐Fused Anion‐Responsive π‐Conjugated Molecules that Form Self‐Assemblies with Unique Electronic Properties

The fusion of bowl‐shaped π‐conjugated corannulene units to anion‐responsive π‐conjugated dipyrrolyldiketone‐boron complexes resulted in new molecular materials with a unique self‐assembly capability. The bowl‐fused receptor with aliphatic tails could form both supramolecular gels and mesophases through π‐stacking interactions and also exhibited anion‐responsive characteristics. The presence of the π‐bowl unit not only afforded enhanced self‐assembly capability both in solution and in the mesophases, as evidenced by gelation experiments and phase‐transition profiles, but also enhanced intrinsic charge‐carrier mobility.     

Insights into poly(3‐hexylthiophene)‐b‐poly(ethylene oxide) block copolymer: Synthesis and solvent‐induced structure formation in thin films

We report the synthesis, characterization, and solvent‐induced structure formation in thin films of an amphiphilic rod‐coil conjugated block copolymer, poly(3‐hexylthiophene)‐b‐poly(ethylene oxide). The diblock copolymers were prepared by a facile click reaction and their characterizations as well as thermal, crystalline, optical properties, and self‐assembly behavior have been investigated in detail. A series of morphologies including two‐phase separated nanostructure, nanofibrils, and their mixed morphology could be obtained depending on the selectivity of solvents to different blocks. Structural analyses demonstrate there is a subtle balance between microphase separation of copolymer and the π‐π stacking of the conjugated P3HT and such balance can be controlled by changing the solvents of different selectivity in solution and the length of P3HT block. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Nanopatterning and micropatterning of cobalt containing block copolymers via phase‐separation and lithographic techniques

Reversible addition fragmentation transfer (RAFT) agent functionalized polydimethylsiloxane (PDMS‐RAFT) was used as a macro‐RAFT agent to polymerize a mixed sandwich cobaltocene containing monomer featuring η⁵‐cyclopentadienyl‐cobalt‐η⁴‐cyclobutadiene. High molecular weight block copolymers (BCP) consisting of a metallic block and a PDMS block with excellent control over molecular weight and polydispersity were prepared. Solid‐state self‐assembly of this BCP resulted in hexagonal domains of metallopolymer phase‐separated from PDMS. In solution, spherical micelles with a metallic core, stabilized by a PDMS corona were prepared. Pyrolysis of the BCP resulted in magnetic nanoparticles with 30% char yield. The BCP was used as an ink material for microcontact printing (μCP) to transfer long‐ranged patterns. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2747–2754     

A doubly responsive AB diblock copolymer: RAFT synthesis and aqueous solution properties of poly (N‐isopropylacrylamide‐block‐4‐vinylbenzoic acid)

We describe herein the synthesis and self‐assembly characteristics of a doubly responsive AB diblock copolymer comprised of N‐isopropylacrylamide (NIPAM) and 4‐vinylbenzoic acid (VBZ). The AB diblock copolymer was prepared via reversible addition‐fragmentation chain transfer (RAFT) radical polymerization in DMF employing a trithiocarbonate‐based RAFT agent. PolyNIPAM was employed as the macroRAFT agent. The NIPAM homopolymerization was shown to possess all the characteristics of a controlled process, and the blocking with VBZ was judged, by size exclusion chromatography, to be essentially quantitative. The NIPAM‐VBZ block copolymer was subsequently demonstrated to be able to form normal and inverse micelles in the same aqueous solution by taking advantage of the stimuli responsive characteristics of both building blocks. Specifically, and as judged by NMR spectroscopy and dynamic light scattering, raising the temperature to 40 °C (above the lower critical solution temperature of the NIPAM block), while at pH 12 results in supramolecular self‐assembly to yield nanosized species that are composed of a hydrophobic NIPAM core stabilized by a hydrophilic VBZ corona. Conversely, lowering the solution pH to 2.0 at ambient temperature results in the formation of aggregates in which the VBZ block is now hydrophobic and in the core, stabilized by the hydrophilic NIPAM block. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5864–5871, 2007     

Self‐assembly of block copolymers with an alkoxysilane‐based core‐forming block: A comparison of synthetic approaches

Polymerization‐induced self‐assembly (PISA) has become the preferred method of preparing self‐assembled nano‐objects based on amphiphilic block copolymers. The PISA methodology has also been extended to the realization of colloidal nanocomposites, such as polymer–silica hybrid particles. In this work, we compare two methods to prepare nanoparticles based on self‐assembly of block copolymers bearing a core‐forming block with a reactive alkoxysilane moiety (3‐(trimethoxysilyl)propyl methacrylate, MPS), namely (i) RAFT emulsion polymerization using a hydrophilic macroRAFT agent and (ii) solution‐phase self‐assembly upon slow addition of a selective solvent. Emulsion polymerization under both ab initio and seeded conditions were studied, as well the use of different initiating systems. Effective and reproducible chain extension (and hence PISA) of MPS via thermally initiated RAFT emulsion polymerization was compromised due to the hydrolysis and polycondensation of MPS occurring under the reaction conditions employed. A more successful approach to block copolymer self‐assembly was achieved via polymerization in a good solvent for both blocks (1,4‐dioxane) followed by the slow addition of water, yielding spherical nanoparticles that increased in size as the length of the solvophobic block was increased. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 420–429     

In Situ Controlled Construction of a Hierarchical Supramolecular Chiral Liquid‐Crystalline Polymer Assembly

Hierarchical supramolecular chiral liquid‐crystalline (LC) polymer assemblies are challenging to construct in situ in a controlled manner. Now, polymerization‐induced chiral self‐assembly (PICSA) is reported. Hierarchical supramolecular chiral azobenzene‐containing block copolymer (Azo‐BCP) assemblies were constructed with π–π stacking interactions occurring in the layered structure of Azo smectic phases. The evolution of chirality from terminal alkyl chain to Azo mesogen building blocks and further induction of supramolecular chirality in LC BCP assemblies during PICSA is achieved. Morphologies such as spheres, worms, helical fibers, lamellae, and vesicles were observed. The morphological transition had a crucial effect on the chiral expression of Azo‐BCP assemblies. The supramolecular chirality of Azo‐BCP assemblies destroyed by 365 nm UV irradiation can be recovered by heating–cooling treatment; this dynamic reversible achiral–chiral switching can be repeated at least five times.     

Co‐assembly of Patchy Polymeric Micelles and Protein Molecules

The development in the synthesis and self‐assembly of patchy nanoparticles has resulted in the creation of complex hierarchical structures. Co‐assembly of polymeric nanoparticles and protein molecules combines the advantages of polymeric materials and biomolecules, and will produce new functional materials. Co‐assembly of positively charged patchy micelles and negatively charged bovine serum albumin (BSA) molecules is investigated. The patchy micelles, which were synthesized using block copolymer brushes as templates, leads to co‐assembly with protein molecules into vesicular structures. The average size of the assembled structures can be controlled by the molar ratio of BSA to patchy micelles. The assembled structures are dissociated in the presence of trypsin. The protein–polymer hybrid vesicles could find potential applications in medicine.     

Supramolecular Architectures from Bent‐Core Dendritic Molecules

Control of the self‐assembly of small molecules to generate architectures with diverse shapes and dimensions is a challenging research field. We report unprecedented results on the ability of ionic, bent dendritic molecules to aggregate in water. A range of analytical techniques (TEM, SEM, SAED, and XRD) provide evidence of the formation of rods, spheres, fibers, helical ribbons, or tubules from achiral molecules. The compact packing of the bent‐core structures, which promotes the bent‐core mesophases, also occurs in the presence of a poor solvent to provide products ranging from single objects to supramolecular gels. The subtle balance of molecule/solvent interactions and appropriate molecular designs also allows the transfer of molecular conformational chirality to morphological chirality in the overall superstructure. Functional motifs and controlled morphologies can be combined, thereby opening up new prospects for the generation of nanostructured materials through a bottom‐up strategy.     

Microphase segregation and selective chain scission of poly(2‐methyl‐2‐oxazoline)‐block‐polystyrene

Herein, we report the design and synthesis of a block copolymer (BCP) with a high Flory–Huggins interaction parameter to access 10 nm feature sizes for potential lithographic applications. The investigated BCP is poly[(2‐methyl‐2‐oxazoline)‐block‐styrene] (PMeOx‐b‐PS), where the PMeOx segment functions as a hydrophilic segment. Two BCPs with different molecular weights were prepared using PMeOx as macroinitiator for copper(0) mediated controlled radical polymerization. The thin film self‐assembly of the obtained PMeOx‐b‐PS was performed by solvent annealing and investigated by atomic force microscopy. Both polymers formed PMeOx cylinders in a PS matrix with an average cylinder diameter of 10.5 nm. Additionally, the ability of the PMeOx domains to selectively degrade under ultraviolet irradiation was explored. It was shown that scission of the PMeOx block does occur selectively, and furthermore that the degraded domains can be removed while leaving the PS matrix intact. By combining synthetic accessibility, small feature sizes, and a selectively cleavable domain, this new BCP system holds significant promise as a lithographic mask for patterning surfaces with high precision. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1349–1357