A gas chromatographic method for measuring 6-mercaptopurine in serum.

A method is presented for the measurement of 6-mercaptopurine (6-MP) in serum. Serum samples containing the drug were treated with dithioerythritol and saturated with ammonium carbonate. 6-MP was then extracted from the serum with a mixture of isopropanol-ethyl acetate (1:1, v/v) containing 0.01% ethanethiol. The solvent was evaporated, the residue dissolved in dilute hydrocholoric acid, washed with chloroform, and extracted with ethyl acetate. 6-MP was derivatized with trimethylanilinium hydroxide and measured gas chromatographically. The sulfhydryl-protecting reagents, dithioerythritol and ethanethiol, were added to prevent the decomposition of 6-MP. The extraction and clean-up method recovered 78 +/- 2% (S.E.) of the 6-MP present. Tracer amounts of [8-14C]6-MP served as the internal standard during the extraction part of the method. Theophyline was used as the internal standard during the gas chromatographic analysis. The standard curve obtained from the gas chromatograph was linear between 0.5 and 20 mug/ml of 6-MP. Serum samples were stored in the freezer for two weeks without significant loss of drug. No interference was encountered from normal serum constituents or xanthines, such as caffeine or theophylline added to serum.     

Determination of 90 Sr in milk by solvent extraction of 90Y (author's transl)

In order to replace the conventional method using violent fuming nitric acid, a new method for the determination of 90 Sr in milk has been developed by using the solvent extraction with bis (2-ethylhexyl) phosphoric acid (HDEHP). The daughter nuclide 90Y in a radiochemical equilibrium with its parent 90Sr was extracted with 2:1 HDEHP-toluene from the acid solution (1M HCL) of milk ash sample prepared by dry-ashing. After stripping with 8M HCL, 90Y, together with stable yttrium added as carrier, was precipated as oxalate to prepare beta-counting source. The radiochemical purity was confirmed by decay curve. The decontamination of strontium was checked by applying non-dispersive fluorescence X-ray analysis using 133Ba as irradiating source. Bone samples of cow were also analyzed by the same method and the results were compared with those obtained by other methods. The duplicate crosschecking analyses of finely ground bone samples were carried out to examine the effectiveness of this method. This simple new method was found to be very effective for the routine analysis of 90Sr in these samples.     

The study of sorption of caesium radionuclides by “T-55” ferrocyanide sorbent from various types of liquid radioactive wastes

The sorption of caesium by T-55 sorbent from different types of liquid radioactive wastes is studied. It is shown that the sorbent can be used for extraction of caesium from high level acidic and saline solutions and also for decontamination of caesium contaminated waters containing surfactants and EDTA.     

Decontamination of uranium-contaminated concrete

This study examined the decontamination method by washing with nitric acid for uranium contaminated concrete pieces produced from the decommissioning of a uranium conversion plant and evaluated the amount of waste sludge generated from the treatment. In addition, carbonate solution, nitric acid and sulfuric acid were used as the extraction reagents for the uranium, and their efficiencies were also compared. For concrete pieces coated with and without epoxy, the separation method of cement paste from aggregates was preferable to the leaching of uranium from concrete because of its simpler decontamination process. When concrete pieces with epoxy were heated for 2 h at 400 °C, pulverized and sequentially washed with 0.1, 2.0 and 1.0 M of nitric acid, their radioactivity reached below the limit value of uranium for self-disposal. Unlike previous results, uranium dissolved in 1 and 2 M sulfuric acid solutions was not removed by strong anion exchange resins such as IRA 910 and Ag1×8.     

Development of organic solvents‐free mode of solidification of floating organic droplet–based dispersive liquid–liquid microextraction for the extraction of polycyclic aromatic hydrocarbons from honey samples before their determination by gas chromatography–mass spectrometry

In this study, a green mode of solidification of floating organic droplet – based dispersive liquid–liquid microextraction has been developed for the extraction of 16 polycyclic aromatic hydrocarbons from honey samples before their determination by gas chromatography–mass spectrometry. In this method, an appropriate volume of menthol:decanoic acid deep eutectic solvent (as an extraction solvent) is added on a sugar cube (as a disperser agent). In the following, the cube is released into the diluted honey sample placed in a tube. After manual shaking a cloudy state is obtained as a result of dispersing the extraction solvent droplets throughout the sample solution and the analytes are extracted into them. After placing the tube in an ice bath, the droplet of the extractant is solidified on the top of the solution. This drop is taken and after dissolving in acetonitrile, an aliquot of the solution is injected into the separation system. Under optimum conditions, the suggested approach had high extraction recoveries (76–93%) and enrichment factors (380–465), low limits of detection (14–52 ng/kg) and quantification (47–173 ng/kg), and satisfactory repeatability (relative standard deviation ≤ 9%).     

The separation of 99Tc from low and medium-level radioactive wastes and its determination by inductively coupled plasma mass spectrometry

A chemical separation method has been developed for the determination of (99)Tc in various types of radioactive wastes. Such a method includes (i) fusion with NaOH, (ii) extraction in a column containing methyltrioctylammonium chloride, (iii) extraction by solvent with N-benzoyl-N-phenylhydroxylamine and, (iv) measurement by inductively-coupled plasma mass spectrometry (ICP-MS). From the performance standpoint, the recovery of (99)Tc, using (99m)Tc as a yield tracer, is higher than 70%. This analytical method, as developed, ensures effective decontamination with respect to the radionuclides, insofar the decontamination factors are greater than 10(+5), whenever the residual activity may be measured. Taking into account a 3sigma counting error, the detection limit obtained with the ICP-MS technique is 1.9 mBq/ml; the method enabling hence to detect activities as low as 0.3 Bq/g, with analysed samples of 0.2 g and a radiochemical yield of 70%. Studies have been dedicated to the (99)Tc measurement, using the electrothermal vaporization ICP-MS technique, which lowers the detection limit by a factor 10, with the standard solution (0.3 pg/ml), compared with the previous ICP-MS technique.     

Air‐assisted dispersive liquid–liquid microextraction based on a new hydrophobic deep eutectic solvent for the preconcentration of benzophenone‐type UV filters from aqueous samples

Deep eutectic solvents are considered as new and green solvents that can be widely used in analytical chemistry such as microextraction. In the present work, a new dl‐ menthol‐based hydrophobic deep eutectic solvent was synthesized and used as extraction solvents in an air‐assisted dispersive liquid–liquid microextraction method for preconcentration and extraction of benzophenone‐type UV filters from aqueous samples followed by high‐performance liquid chromatography with diode array detection. In an experiment, the deep eutectic solvent formed by dl‐ menthol and decanoic acid was added to an aqueous solution containing the UV filters, and then the mixture was sucked up and injected five times by using a glass syringe, and a cloudy state was achieved. After extraction, the solution was centrifuged and the upper phase was subjected to high‐performance liquid chromatography for analysis. Various parameters such as the type and volume of the deep eutectic solvent, number of pulling, and pushing cycles, solution pH and salt concentration were investigated and optimized. Under the optimum conditions, the developed method exhibited low limits of detection and limits of quantitation, good linearity, and precision. Finally, the proposed method was successfully applied to determine the benzophenone‐type filters in environmental water samples with relative recoveries of 88.8–105.9%.     

Analysis of Dehydroabietic Acid in Kraft Mill Effluents by High-Performance Liquid Chromatography

Abstract

A rapid high-performance liquid chromatographic method for the determination of dehydroabietic acid in kraft mill effluent is described. Selective solvent extraction of the samples with dichloromethane was performed. The samples were isocratically analysed on a Rad-Pak C18 column using 75% acetonitrile in water (0.1% acetic acid added). Detection was carried out at 220 nm and 267 nm on a variable wavelength detector with a detection limit of 0.01 mg/L.     

A three‐phase solvent extraction system combined with deep eutectic solvent‐based dispersive liquid–liquid microextraction for extraction of some organochlorine pesticides in cocoa samples prior to gas chromatography with electron capture detection

A sample pretreatment method based on the combination of a three‐phase solvent extraction system and deep eutectic solvent‐based dispersive liquid–liquid microextraction has been introduced for the extraction of four organochlorine pesticides in cocoa samples before their determination by gas chromatography‐electron capture detection. A mixture of sodium chloride, acetonitrile, and potassium hydroxide solution is added to cocoa bean or powder. After vortexing and centrifugation of the mixture, the collected upper phase (acetonitrile) is removed and mixed with a few microliters of N,N‐diethanol ammonium chloride: pivalic acid deep eutectic solvent. Then it is rapidly injected into deionized water and a cloudy solution is obtained. Under optimum conditions, the limits of detection and quantification were found to be 0.011‐0.031 and 0.036‐0.104 ng/g, respectively. The obtained extraction recoveries varied between 74 and 92%. Also, intra‐ (n = 6) and interday (n = 4) precisions were less than or equal to 7.1% for the studied pesticides at a concentration of 0.3 ng/g of each analyte. The suggested method was applied to determine the studied organochlorine pesticide residues in various cocoa powders and beans gathered from groceries in Tabriz city (Iran) and aldrin and dichlobenil were found in some of them.     

Capillary electrophoretic chiral determination of mirtazapine and its main metabolites in human urine after enzymatic hydrolysis

Capillary electrophoresis and liquid-phase microextraction using porous polypropylene hollow fibers were employed for the enantioselective analyses of mirtazapine and its metabolites demethylmirtazapine and 8-hydroxymirtazapine in human urine. Before the extraction, urine samples (1.0 mL) were submitted to enzymatic hydrolysis at 37 degrees C for 16 h. Then, the enzyme was precipitated with trichloroacetic acid, the pH was adjusted to 8 with 0.5 mol/L phosphate buffer solution (pH 11) and 15% sodium chloride was further added. The analytes were transferred from the aqueous donor phase, through n-hexyl ether (organic solvent immobilized in the fiber), into 0.01 moL/L acetic acid solution (acceptor phase). The electrophoretic analyses were carried out in 50 mmol/L phosphate buffer solution (pH 2.5) containing 0.55% w/v carboxymethyl-beta-cyclodextrin. The method was linear over the concentration range of 62.5-2500 ng/mL for each mirtazapine and 8-hydroxymirtazapine enantiomer and 62.5-1250 ng/mL for each demethylmirtazapine enantiomer. The quantification limit was 62.5 ng/mL for all the enantiomers. Within-day and between-day assay precision and accuracy were lower than 15% for all the enantiomers. Finally, the method proved to be suitable for pharmacokinetic studies.     

悬浮固化-分散液液微萃取-液相色谱-串联质谱测定纺织废水中磷系阻燃剂

建立了悬浮固化-分散液液微萃取结合液相色谱-串联质谱测定纺织废水中5种痕量磷系阻燃剂的方法。通过对萃取过程中萃取剂、分散剂的种类与体积、盐浓度、溶液pH值等对萃取效率的影响因素优化,确立了最佳萃取条件。采用了密度小于水的十一烷醇（400 μL）为萃取剂,甲醇（300 μL）为分散剂,控制溶液pH值在6~9之间,NaCl添加量为2 g,萃取时间为涡旋2 min。在优化的萃取条件下,该方法在2~100 μg/L均有良好的线性关系,相关系数大于0.995,除二（2,3-二溴丙基）磷酸酯（BIS）的检出限为5 μg/L外,三（2-氯乙基）磷酸酯（TCEP）、三（1,3-二氯-异丙基）磷酸酯（TDCP）、三（1-氮丙啶基）氧化膦（TEPA）和三（2,3-二溴丙基）磷酸酯（TRIS）的检出限均为2 μg/L。后整理、染色和印花等实际废水样品加标试验表明,方法的平均回收率为71.6%~114.5%,RSD为2.7%~11.2%（n=6）。对11个样品进行检测,其中3个废水样品检出TCEP与TDCP化合物,含量为2.6~3.4 μg/L。本方法简单,快速,灵敏度好且环保绿色,能够对纺织废水中的5种痕量磷系阻燃剂进行准确的定性与定量检测。     

A microwave-assisted extraction method combined with magnetic ionic liquid-based dispersive liquid–liquid microextraction for the extraction of chloramine–T from fish samples prior to its determination by high-performance liquid chromatography

In the present work, a combination of microwave-assisted extraction with magnetic ionic liquid–based dispersive liquid–liquid microextraction was developed for the extraction of chloramine–T from fish samples. In this method, the sample was mixed with a hydrochloric acid solution and exposed to microwave irradiations. By doing so, chloramine–T was converted to p–toluenesulfonamide and extracted from the sample into an aqueous phase. Then, a mixture of acetonitrile (as a dispersive solvent) and magnetic ionic liquid (as an extraction solvent) was rapidly injected into the obtained solution. In the following, the magnetic solvent droplets including the extracted analytes were isolated from the aqueous solution in the presence of an external magnetic field and after diluting with acetonitrile injected into high-performance liquid chromatography equipped with a diode array detector. Under the optimum extraction conditions, high extraction recovery (78%), low limits of detection (7.2 ng/g) and quantification (23.9 ng/g), good repeatability (relative standard deviations ≤5.8 and 6.8% for intra– and inter-day precisions, respectively), and wide linear range (23.9–1000 ng/g) were obtained. Finally, various fish samples marketed in Tabriz city (East Azarbaijan, Iran) were analyzed with the suggested method.     

Determination of triazole pesticide residues in edible oils using air‐assisted liquid–liquid microextraction followed by gas chromatography with flame ionization detection

In the present study, a rapid, simple, and highly efficient sample preparation method based on air‐assisted liquid–liquid microextraction followed by gas chromatography with flame ionization detection was developed for the extraction, preconcentration, and determination of five triazole pesticides (penconazole, hexaconazole, diniconazole, tebuconazole, and triticonazole) in edible oils. Initially, the oil samples were diluted with hexane and a few microliter of a less soluble organic solvent (extraction solvent) in hexane was added. To form fine and dispersed extraction solvent droplets, the mixture of oil sample solution and extraction solvent is repeatedly aspirated and dispersed with a syringe. Under the optimum extraction conditions, the method showed low limits of detection and quantification between 2.2–6.1 and 7.3–20 μg/L, respectively. Enrichment factors and extraction recoveries were in the ranges of 71–96 and 71–96%, respectively. The relative standard deviations for the extraction of 100 and 250 μg/L of each pesticide were less than 5% for intraday (n = 6) and interday (n = 3) precisions. Finally edible oil samples were successfully analyzed using the proposed method, and hexaconazole was found in grape seed oil.     

超高效液相色谱-四极杆-飞行时间质谱法快速筛查农药制剂中非法添加的化学杀菌剂

建立了超高效液相色谱-四极杆-飞行时间质谱法(UPLC-Q-TOF MS)快速筛查农药制剂中35种非法添加化学杀菌剂的方法.农药制剂样品经甲醇超声溶解提取后,采用Zorbax C18色谱柱(100 mm×1.8 mm,2.1μm)进行分离,以0.1%甲酸-乙睛作为流动相进行梯度洗脱,采用正离子全扫描模式进行分析.在所建立的条件下,35种杀菌剂在0.2,0.4和2.0 mg/kg水平下的添加回收率为81.0%~101.3%,相对标准偏差为1.0%~4.4%.在100份样品有6份样品中筛查出添加了化学杀菌剂,并进行了含量分析.本方法分析效率高,结果准确可靠,适用于农药制剂中非法添加化学杀菌剂的定性筛查.     

Dynamic ultrasound-assisted extraction of polyphenols in tobacco

A novel extraction method, namely dynamic ultrasound-assisted extraction, is investigated. This technique is efficient with respect to both time and solvent consumption because it utilizes ultrasonic energy in dynamic mode during extraction. Polyphenols (chlorogenic acid, esculetin, rutin, scopoletin, and quercitrin) are extracted from a tobacco (Nicotina tobaccum L.) sample for 10 min with 6 mL of solvent. Fresh solvent is continuously pumped through the sample, with which the analytes can be rapidly extracted, and the possibility of degradation efficiently avoided. Methanol involving 0.5% w/v ascorbic acid was used as extraction solvent; optimal flow rate and extraction time were investigated. The extract was cleaned up by C18 disposable cartridge. The spiked and nonspiked tobacco samples were used for the evaluation of the proposed method. Recoveries obtained were varied from 96 to 108% and RSDs from 2.0 to 4.6%. This extraction technique was revealed to recover larger amounts of polyphenols from tobacco, compared to the static ultrasound-assisted extraction method.     

Determination of decabromodiphenyl ether in water samples by single-drop microextraction and RP-HPLC

This paper describes the development of a new method using single-drop microextraction (SDME) and RP-HPLC for the determination of decabromodiphenyl ether (BDE-209) in water samples. The effects of SDME parameters such as extraction solvent, microdrop volume, extraction time, stirring speed, salt concentration, and sample pH on the extraction performance are investigated. Under optimal extraction conditions (extraction solvent, toluene; solvent drop volume, 3.0 microL; extraction time, 15 min; stirring speed, 600 rpm; no addition of salt and change of sample pH), the calibration curve was drawn by plotting peak area against a series of BDE-209 concentrations (0.001-1 microg/mL) in aqueous solution; the correlation coefficient (r) was 0.9998. The limit of detection was 0.7 ng/mL. The enrichment factor was 10.6. The precision of this method was obtained by six successive analyses of a 100 ng/mL standard solution of BDE-209, and RSD was 4.8%. This method was successfully applied to the extraction of BDE-209 from tap and East Lake water samples with relative recoveries ranging from 92.5 to 102.8% and from 91.5 to 96.2%, respectively, and the relative standard deviations (n = 3) were 4.4 and 2.2%. The proposed method is acceptable for the analysis of BDE-209 in water samples.     

Extraction and determination of pyridinium ionic liquid cations in environmental water samples by using strong cation exchange solid phase extraction and ion chromatography

This paper presents a novel analytical method for the determination of pyridinium ionic liquid cations in environmental water samples by ion chromatography coupled with solid phase extraction. The water samples were purified and enriched by a sulphonic acid extraction column, and then the impurities were washed with 10 mL water – 20% (v/v) acetonitrile solution and the analytes eluted with 0.5 mol L^?1 phosphoric acid – sodium dihydrogen phosphate buffer solution – 55% methanol. The eluted analytes were determined by ion chromatography with 3.0 mmol L^?1 methane sulphonic acid – 8% acetonitrile as the mobile phase and direct conductivity detection. Three pyridinium cations were completely separated in 20 min and the retention mechanism basically conforms to the ion exchange mode. The newly developed method has been successfully applied to the analysis of pyridinium cations in spiked environmental water samples, which provided satisfactory recoveries in the range of 98.8% to 100.0% with the relative standard deviations less than 2.8%. The concentration of 0.004 to 0.01 mg L^?1 in water samples can be preconcentrated by this method. The method is accurate, reliable, simple and practical. This research provides a new reference for detecting ionic liquid cations in environmental water samples and studying the environmental risk assessment of ionic liquids.     

Direct extraction of alkylphenols, chlorophenols and bisphenol A from acid-digested sediment suspension for simultaneous gas chromatographic-mass spectrometric analysis

The direct extraction of alkylphenols, chlorophenols and bisphenol A from an acid-digested sediment suspension for GC-MS analysis was studied. The sediment was digested with acid while the hydrolyzed analytes were being extracted with dichloromethane. The conditions of the acid digestion and extraction were optimized in terms of time, acidity of digestion, and extracting solvent. It is possible to complete the extraction within 20 min with 5 ml of 0.1 M HCl digesting solution and three portions of 5 ml of dichloromethane. The recoveries of analytes were mostly around 90% with about 10% relative standard deviations. With this technique parallel treatment of large numbers of sediment samples is possible without any expensive special equipment or heating process. The analytical characteristics of this extraction technique were compared with Soxhlet extraction and the pressurized liquid extraction technique. The technique was examined and evaluated for real environmental sediment samples and certified reference material of natural matrix.     

Flame and flameless atomic-absorption determination of tellurium in geological materials

The sample is digested with a solution of hydrobromic acid and bromine and the excess of bromine is expelled. After dilution of the solution to approximately 3 M in hydrobromic acid, ascorbic acid is added to reduce iron(III) before extraction of tellurium into methyl isobutyl ketone (MIBK). An oxidizing air-acetylene flame is used to determine tellurium in the 0.1–20 ppm range. For samples containing 4–200 ppb of tellurium, a carbon-rod atomizer is used after the MIBK extract has been washed with 0.5 M hydrobromic acid to remove the residual iron. The flame procedure is useful for rapid preliminary monitoring, and the flameless procedure can determine tellurium at very low concentrations.     

Rapid determination of citrinin in corn by fluorescence liquid chromatography and enzyme immunoassay

A rapid assay procedure was developed for mycotoxin citrinin in corn using liquid-liquid extraction (LLE) cartridges. Ground corn was extracted with methylene chloride and 0.5 N phosphoric acid. The extract was added to an LLE cartridge containing a diatomaceous-earth adsorbant, previously impregnated with sodium bicarbonate solution. After aspiration to dryness, the cartridge was eluted with methanol-water (4 + 1), and aliquots were taken for quantitation by reversed-phase liquid chromatography with fluorescence detection. Recoveries of citrinin added to ground corn at 200-1600 ng/g ranged from 71.2 to 86.3%, with coefficients of variation between 4.1 and 10.6%. An indirect enzyme immunoassay was also evaluated, using sodium carbonate solution for extraction. Recoveries of citrinin added to ground corn at 200-2000 ng/g ranged from 53.2 to 67.2%, but the coefficients of variation varied between 18.4 and 51.5%. The LLE cartridge procedure offers the advantages of low solvent consumption and speed, and is amenable to automation.