Active facet determination of layered double hydroxide for oxygen evolution reaction

Oxygen evolution reaction(OER)plays an indispensable role in developing renewable clean energy resources.One of the critical bottlenecks for the reaction is the...     

Boosting the electrocatalytic performance of NiFe layered double hydroxides for the oxygen evolution reaction by exposing the highly active edge plane (012)

The intrinsic activity of NiFe layer double hydroxides (LDHs) for the oxygen evolution reaction (OER) suffers from its predominantly exposed (003) basal plane, which is thought to have poor activity. Herein, we construct a hierarchal structure of NiFe LDH nanosheet-arrays-on-microplates (NiFe NSAs-MPs) to elevate the electrocatalytic activity of NiFe LDHs for the OER by exposing a high-activity plane, such as the (012) edge plane. It is surprising that the NiFe NSAs-MPs show activity of 100 mA cm⁻² at an overpotential (η) of 250 mV, which is five times higher than that of (003) plane-dominated NiFe LDH microsheet arrays (NiFe MSAs) at the same η, representing the excellent electrocatalytic activity for the OER in alkaline media. Besides, we analyzed the OER activities of the (003) basal plane and the (012) and (110) edge planes of NiFe LDHs by density functional theory with on-site Coulomb interactions (DFT+U), and the calculation results indicated that the (012) edge plane exhibits the best catalytic performance among the various crystal planes because of the oxygen coordination of the Fe site, which is responsible for the high catalytic activity of NiFe NSAs-MPs.

The (012) edge plane of NiFe layer double hydroxides (LDHs) has been proven to be a highly active plane for water oxidation.     

Synergistic cerium doping and MXene coupling in layered double hydroxides as efficient electrocatalysts for oxygen evolution

Oxygen evolution reaction(OER) is a bottle-neck process in many sustainable energy conversion systems due to its sluggish kinetics.The development of cost-effective yet efficient electrocatalysts towards OER is highly desirable but still a great challenge at current stage.Herein,a new type of hybrid nanostructure,consisting of two-dimensional(2D) Cerium-doped NiFe-layered double hydroxide nanoflakes directly grown on the 2D Ti3C2Tx MXene surface(denoted as NiFeCe-LDH/MXene),is designed using a facile insitu coprecipitation method.The resultant NiFeCe-LDH/MXene hybrid presents a hierarchical nanoporous structure,high electrical conductivity and strong interfacial junction because of the synergistic effect of Ce doping and MXene coupling.As a result,the hybrid catalyst exhibits an excellent catalytic activity for OER,delivering a low onset overpotential of 197 mV and an overpotential of 260 mV at a current density of 10 mA·cm-2 in the alkaline medium,much lower than its pure LDH counterparts and IrO2 catalyst.Besides,the hybrid catalyst also displays a fast reaction kinetics and a remarkable stable durability.Further theoretic studies using density function theory(DFT) methods reveal that Ce doping could effectively narrow the bandgap of NiFe-LDH and reduce the overpotential in OER process.This work may shed light on the exploration of advanced electrocatalysts for renewable energy conversion and storage systems.     

Electrosynthesis of hierarchical NiLa-layered double hydroxide electrode for efficient oxygen evolution reaction

Oxygen evolution reaction(OER) is a key process for electrochemical water splitting due to its intrinsic large overpotential. Recently, layered double hydroxides(LDHs), especially Ni Fe-LDH, have been regarded as highly performed electrocatalysts for OER in alkaline condition. Here we first present a new class of Ni La-LDH electrocatalyst synthesized by an electrochemical process for efficient water splitting. The as-prepared NiL a-LDH nanosheet arrays(NSAs) give remarkable electrochemical activity and durability under alkaline environments, with a low overpotential of 209 mV for OER to deliver a current density of 10 mA cm~(-2), surpassing most of previous reported LDHs eletrocatalysts. The presence of NiLa-LDH in this work extends the studies about LDHs-based electrocatalysts, which will benefit the development of electrochemical energy storage and conversion systems.     

Fe-Al layered double hydroxides in bromate reduction: Synthesis and reactivity

This study presents a rare use of layered double hydroxides of Fe(II) and Al(III) (Fe-Al LDH), as reported for the first time for bromate removal from aqueous solutions. The Fe-Al LDH samples were prepared with Fe/Al molar ratios of 1-4 using a co-precipitation method at pH 7, with subsequent hydrothermal treatment at 120°C. The Fe-Al LDH (molar ratio of Fe/Al=1, 2) with a layered structure exhibited nearly complete removal of bromate from initial concentration of 100μmol/dm(3) at a wide pH range of 4.0-10.5 over a 2h reaction period; the residual bromate concentration in the solution was lower than the detection limit of 0.07μmol/dm(3) (9μg-BrO(3)(-)/dm(3)). During the reaction period, bromide was released into the solution via a reduction process. Reactivity of Fe-Al LDH with a Fe/Al molar ratio of 2 did not decrease the bromate reduction efficiency during 30days.     

Structural and texture evolution with temperature of layered double hydroxides intercalated with paramolybdate anions

Paramolybdate-LDHs with MgAl or ZnAl cations within the layers have been prepared by the ion-exchange method from hydrotalcites with different interlayer anions (OH-, NO3(-), and terephthalate). The samples and the oxides obtained after their calcination were characterized by element chemical analysis, PXRD, FT-Raman spectroscopy, thermal analysis (TG/DTA), N2 adsorption at -196 degrees C, and SEM. The results show that layered solids with hydrotalcite-type structure were obtained in which the interlayer space is occupied by heptamolybdate with a small amount of MoO4(2-) units formed through hydrolysis of the polyanion; both oxomolybdenum species undergo a progressive distortion of the octahedral units from 50 degrees C but are roughly stable up to 250 degrees C as a consequence of the interaction between the polyanion and the brucite-like layers. This distortion is responsible for the observed decrease in the height of the gallery for samples heated in the temperature range, 50-250 degrees C, with respect to the original samples. Rehydration of the calcined solids allows recovering of their original structures and the initial values for the gallery heights. Calcination between 300 and 400 degrees C gives rise to a collapse of the layered structure, and amorphous phases are formed, in which molybdenum is both octahedrally and tetrahedrally coordinated. Crystalline magnesium and zinc molybdates (MgMoO4 and ZnMoO4) are formed at 450 and 600 degrees C, respectively. All solids have some microporosity, which decreases with increasing the calcination temperature.     

Structural and textural evolution during folding of layers of layered double hydroxides

Layers of a layered double hydroxide, containing aluminum 4-fold coordinated, were partially folded in order to obtain a fibrous hydrotalcite-like compound. The hydrotalcite layers, in the presence of an anionic surfactant (sodium dodecyl sulfate) after hydrothermal treatment for 2 weeks, acquire a mesoporous-like arrangement. The transformation was monitored by techniques sensitive to structural and textural properties. Results suggest that brucite-like layers can be joined throughout unsaturated coordinated aluminum, that is, tetrahedral aluminum which links through hydrogen bonds to form aluminum octahedrally coordinated. The fractal dimension parameter was very sensitive to evolution from layered to fibrous hydrotalcites.     

Ternary layered double hydroxide oxygen evolution reaction electrocatalyst for anion exchange membrane alkaline seawater electrolysis

Anion exchange membrane(AEM) water electrolyzers are promising energy devices for the production of clean hydrogen from seawater. However, the lack of active and robust electrocatalysts for the oxygen evolution reaction(OER) severely impedes the development of this technology. In this study, a ternary layered double hydroxide(LDH) OER electrocatalyst(NiFeCo-LDH) is developed for high-performance AEM alkaline seawater electrolyzers. The AEM alkaline seawater electrolyzer catalyzed by the NiFeCo L...     

Immobilization of lipase from Candida rugosa on layered double hydroxides for esterification reaction

Synthesis of layered double hydroxides (LDHs) of Zn/Al-NO3- hydrotalcite (HIZAN) and Zn/Al-diocytyl sodium sulfosuccinate (DSS) nanocomposite (NAZAD) with a molar ratio of Zn/Al of 4:1 were carried out by coprecipitation through continuous agitation. Their structures were determined using X-ray diffractometer spectra, which showed that basal spacing for LDH synthesized by both methods was about 8.89 A. An expansion of layered structure of about 27.9 A was observed to accommodate the surfactant anion between the interlayer. This phenomenon showed that the intercalation process took place between the LDH interlayer. Lipase from Candida rugosa was immobilized onto these materials by physical adsorption method. It was found that the protein loading onto NAZAD is higher than HIZAN. The activity of immobilized lipase was investigated through esterification of oleic acid and 1-butanol in hexane. The effects of pore size, surface area, reaction temperature, thermostability of the immobilized lipases, storage stability in organic solvent, and leaching studies were investigated. Stability was found to be the highest in the nanocomposite NAZAD.     

Hybrid and biohybrid layered double hydroxides for electrochemical analysis

Layered double hydroxides (LDH) are lamellar materials that have been extensively used as electrode modifiers. Nanostructured organic–inorganic materials can be designed by intercalation of organic or metallic complexes within the interlayer space of these materials or by the formation of composite materials based on biopolymers (alginate or chitosan) or biomolecules, such as enzymes. These hybrid or biohybrid materials have interesting properties applicable in electroanalytical devices. From an exhaustive review of the literature, the relevance of these hybrid and biohybrid LDH materials as electrode materials for electrochemical detection of species with an environmental or health impact is evaluated. The analytical characteristics (sensitivity and detection limit) of LDH-based amperometric sensors or biosensors are scrutinized.

Facile synthesis of thin NiFe-layered double hydroxides nanosheets efficient for oxygen evolution

Ultrathin NiFe-layered double hydroxide (LDH) nanosheets are facilely and cost-effectively fabricated. The as-prepared NiFe-LDH nanosheets are highly active and stable electrocatalysts for water oxidation in alkaline environment, exhibiting a much higher oxygen evolution activity and lower overpotential with the enhanced stability, much superior to the previously reported LDH-derived catalysts. This work provides a facile methodology for the fabrication of thin nanosheets, which are promising in the renewable energy conversion.     

Sulfate intercalated layered double hydroxides prepared by the reformation effect

The removal of the sulfate anion from water using synthetic hydrotalcite (Mg/Al LDH) was investigated using powder X-ray diffraction (XRD) and thermogravimetric analysis (TG). Synthetic hydrotalcite Mg₆Al₂(OH)₁₆(CO₃)·4H₂O was prepared by the co-precipitation method from aluminum and magnesium chloride salts. The synthetic hydrotalcite was thermally activated to a maximum temperature of 380 °C. Samples of thermally activated hydrotalcite where then treated with aliquots of 1000 ppm sulfate solution. The resulting products where dried and characterized by XRD and TG. Powder XRD revealed that hydrotalcite had been successfully prepared and that the product obtained after treatment with sulfate solution also conformed well to the reference pattern of hydrotalcite. The d₍₀₀₃₎ spacing of all samples was found to be within the acceptable region for a LDH structure. TG revealed all products underwent a similar decomposition to that of hydrotalcite. It was possible to propose a reasonable mechanism for the thermal decomposition of a sulfate containing Mg/Al LDH. The similarities in the results may indicate that the reformed hydrotalcite may contain carbonate anion as well as sulfate. Further investigation is required to confirm this.     

硫掺杂镍铁层状双氢氧化物的氧析出电催化性能

氧析出反应(OER)是裂解水、二氧化碳还原、以及可充电的锌空电池等许多技术中重要的半反应,但受限于其迟缓的反应动力学,开发高效的氧析出催化剂迫在眉睫.在OER出反应中,性能较好的非贵金属催化剂主要是第四周期过渡金属的一些化合物,如氧化物、氢氧化物、硫化物、硒化物、磷化物等等.在这些材料中,镍铁双金属化合物被认为是最优的氧析出材料,尤其是镍铁层状双氢氧化物(Ni Fe-LDHs)它拥有较大的电化学活性面积以暴露较多活性位点,同时镍铁两种过渡金属元素存在协同效应,使得其具有良好的催化性能.然而,这一类材料的OER性能仍然有优化的空间.研究表明,将硫化物氧化得到的氢氧化物会有少量的硫元素残留,这种硫残留的氢氧化物拥有十分优异的OER性能.为了进一步认识硫的引入对Ni Fe-LDHs的OER行为的影响,本文通过水热法合成了硫掺杂的Ni Fe-LDHs,考察了硫的掺杂量对催化剂性能的影响,验证了微量硫的存在对Ni Fe-LDHs的OER性能的贡献.扫描电镜图片显示,水热合成的催化剂是厚度为几十纳米的薄片,拥有较高的比表面积, X射线荧光光谱分析证明合成的硫掺杂Ni Fe-LDHs中镍铁的元素比例为4:1,而且硫的掺杂量并不影响催化剂的形貌和其中镍铁元素比.X射线光电子能谱分析表明,硫原子的引入使得铁原子结合能降低,即硫与铁的相互作用部分降低了铁的价态,这种硫和铁的相互作用能够优化OER反应中间体OH*与O*在铁活性位点上的吸附自由能,降低氧析出反应的过电势.电化学测试表明,拥有0.43%的硫掺杂Ni Fe-LDHs拥有最好的氧析出性能, 10 m A cm^-1下超电势仅有257 m V, Tafel斜率61.5 m V dec^-1.此后,随着硫掺杂量的提升,其性能先保持稳定,随后有所下降.在稳定测试中,硫掺杂的镍铁层状双氢氧化物在10 m Acm-1电流密度下循环30 h后过电位仅衰减14 m V.在对稳定性测试后的催化剂进行表征表明,催化剂发生了轻微了变形,但这对性能的影响不大.综上,本文提供了一种简便的通过非金属元素掺杂调控过渡金属氧化物的结构和电子态的方法,有望为设计高活性OER电催化剂提供新思路.     

Bimetallic cobalt-nickel coordination polymer electrocatalysts for enhancing oxygen evolution reaction

Coordination polymers（CPs） have great potential to be used in electrocatalysis owing to their designable compositions and structures. It is highly challenging to apply CPs as electrocatalysts for oxygen evolution reaction（OER） on account of insufficient catalytic efficiency and relatively poor stability of current electrocatalysts. Herein, through a mixed-metal strategy, one-dimensional Co_xNi_1-x-HIPA with dual active sites was synthesized and studied for OER electrocatalyst...     

Co porphyrin-based metal-organic framework for hydrogen evolution reaction and oxygen reduction reaction

Constructing molecule@support composites is an attractive strategy to realize heterogeneous molecular electrocatalysis. Herein, we synthesized metal-organic framework (MOF)-supported molecular catalysts for hydrogen evolution and oxygen reduction reaction (HER/ORR). Ligand exchange strategy was used to prepare molecule@support hybrids due to the same functional group. A series of hybrids were obtained using Co porphyrin (1) and different MOFs including MIL-88(Fe), MOF-5(NiCo) and UIO-66(Zr). The 1@MOF-5(NiCo) had the best HER and ORR activity compared with 1@MIL-88(Fe) and 1@MOF-5(NiCo). These hybrids also exhibited tunable selectivity for ORR with four-electron process, which can be attributed to the synergistic effect of porphyrin molecules and MOFs. This work provides a possibility for molecular catalysts to improve activity of HER and tune selectivity of ORR.     

均匀沉淀法直接合成有机阴离子柱撑水滑石

以尿素为沉淀剂用均匀沉淀法直接合成有机阴离子柱撑水滑石(Layered Double Hydroxides，LDH)及CoAl水滑石等，并用XRD，FT—IR，TGA，TEM等分析手段对所合成的水滑石进行了表征．结果表明，尿素均匀沉淀法可以直接合成有机阴离子柱撑水滑石及CoAl水滑石等，并且可以方便地消除原料中阴离子的干扰，是合成有机阴离子柱撑水滑石及CoAl水滑石等的一个简便快速的新方法。     

Stabilization of emulsions by heterocoagulation of clay minerals and layered double hydroxides

 Paraffin/water emulsions were stabilized by colloidal particles without surface active agents. Mixtures of two types of particles with opposite signs of charge were used: a layered double hydroxide (the hydroxide layers carry positive charges) and the clay mineral montmorillonite (the silicate layers carry negative charges). The emulsions were very stable and did not separate a coherent oil phase. The stability of the emulsion (no oil coalescence after centrifugation) was independent of the mixing ratio of both the compounds when the total solid content was >0.5%. Solid contents up to 2.0% were optimal. In contrast to stability, flow behavior of the emulsion was dependent on the mass fraction χ of the hydroxide. The maxima of viscosity and yield value were observed at χ≈0.2–0.3; the emulsion showed pronounced antithixotropic behavior. Weak thixotropic properties, smaller viscosities and yield values were observed at χ≤0.2 and ≥0.5. In the absence of the clay mineral, the double hydroxide particles stabilize by forming envelopes around the oil droplets. Addition of bentonites creates a three-dimensional network of particles with high elasticity which impedes coalescence of the oil droplets. Received: 9 March 1998 Accepted: 6 April 1998     

Study of organo-hybrid layered double hydroxides by medium and near infrared spectroscopy

An Mg/Al layered double hydroxide (LDH) containing carbonate ion in its interlayer region was examined by medium infrared (MIR) and near infrared reflectance spectroscopy (NIRS). The MIR and NIR spectroscopy techniques was also used to study two organo-hybrid LDHs containing interlayer dodecylbenzenesulphonate (DBS) and dodecylsulphate (DS) ions, respectively. The NIR spectra for the latter solids were found to exhibit the overtone and combination bands for the hydroxyl groups in addition to those typical bands of the organic host functions.     

用焙烧复原法插层组装有机层柱双氢氧化物

有机酸根插层双氢氧化物(简记为:LDHs OA)是制备具有特殊性质和功能的层柱材料的一类重要前驱体[1 3]。本文以Mg6Al2(OH)16CO2-3·6H2O(简记为MgAl CO2-3)和Zn6Al2(OH)16CO2-3·4H2O(简记为ZnAl CO2-3)为前体,用焙烧复原法将十四酸根(简记为14A)和十八酸根(简记为18A)分别插层组装到了MgAl LDHs和ZnAl LDHs层板间而制得了具有大的层间距、良好的结晶度和规整的层状结构的14A(18A)插层LDHs层柱材料(分别简记为MgAl 14A,mgAl 18A,ZnAl 14A,ZnAl 18A),用XRD谱、IR谱表征了插层交换产物的结构。1　实验部分1.1　仪…     

Synthesis and characterization of layered double hydroxides with a high aspect ratio

A new route for synthesis of Mg/Al layered double hydroxide (Mg₆Al₂(OH)₁₆(CO₃)·4H₂O) has been introduced, which can be considered as a modified calcination-rehydration method. Under the hydrothermal conditions, LDHs with a high aspect ratio were synthesized and characterized by inductively coupled plasma-atom emission spectrometer (ICP-AES), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), thermal measurement (TG-DTG) and scanning electron microscopy (SEM). XRD patterns display the crystalline enhanced with the increase of hydrothermal temperature and aging time. TG-DTG curves show the more stable LDHs were synthesized at higher temperature. SEM images indicate the lateral size of the synthesized LDHs locates at ca. 1-6 μm and the thickness at ca. 35-60 nm. And the particle size depends strongly on the treatment temperature and aging time. A buffer solution consisted of HCO₃⁻ and CO₃²⁻ keeps the pH of reaction system in a certain range and offers a low supersaturated reaction circumstance. This is of high importance for the formation of LDHs with a high aspect ratio.