Multiconfiguration optimized effective potential method for a density-functional treatment of static correlation

An approach to treat static correlation within a density-functional framework is presented. To that end, a multiconfiguration optimized effective potential (MCOEP) method is derived. In contrast to standard multiconfiguration self-consistent field (MCSCF) methods and previous combinations of MCSCF procedures with density-functional theory, the MCOEP method yields well-defined physically meaningful orbital and eigenvalue spectra. In addition to the electronic ground state also excited electronic states can be described. The MCOEP method is implemented invoking the localized Hartree-Fock approximation, leading to a multiconfiguration localized Hartree-Fock approach. Applications of the new method to the dissociation of the hydrogen molecule and the isomerization of ethene and cyclobutadiene show that it is capable of describing situations that are characterized by strong static correlation.     

Time-dependent quasirelativistic density-functional theory based on the zeroth-order regular approximation

A time-dependent quasirelativistic density-functional theory for excitation energies of systems containing heavy elements is developed, which is based on the zeroth-order regular approximation (ZORA) for the relativistic Hamiltonian and a noncollinear form for the adiabatic exchange-correlation kernel. To avoid the gauge dependence of the ZORA Hamiltonian a model atomic potential, instead of the full molecular potential, is used to construct the ZORA kinetic operator in ground-state calculations. As such, the ZORA kinetic operator no longer responds to changes in the density in response calculations. In addition, it is shown that, for closed-shell ground states, time-reversal symmetry can be employed to simplify the eigenvalue equation into an approximate form that is similar to that of time-dependent nonrelativistic density-functional theory. This is achieved by invoking an independent-particle approximation for the induced density matrix. The resulting theory is applied to investigate the global potential-energy curves of low-lying LambdaS- and omega omega-coupled electronic states of the AuH molecule. The derived spectroscopic parameters, including the adiabatic and vertical excitation energies, equilibrium bond lengths, harmonic and anharmonic vibrational constants, fundamental frequencies, and dissociation energies, are in good agreement with those of time-dependent four-component relativistic density-functional theory and ab initio multireference second-order perturbation theory. Nonetheless, this two-component relativistic version of time-dependent density-functional theory is only moderately advantageous over the four-component one as far as computational efforts are concerned.     

Efficient exact-exchange time-dependent density-functional theory methods and their relation to time-dependent Hartree-Fock

A recently introduced time-dependent exact-exchange (TDEXX) method, i.e., a response method based on time-dependent density-functional theory that treats the frequency-dependent exchange kernel exactly, is reformulated. In the reformulated version of the TDEXX method electronic excitation energies can be calculated by solving a linear generalized eigenvalue problem while in the original version of the TDEXX method a laborious frequency iteration is required in the calculation of each excitation energy. The lowest eigenvalues of the new TDEXX eigenvalue equation corresponding to the lowest excitation energies can be efficiently obtained by, e.g., a version of the Davidson algorithm appropriate for generalized eigenvalue problems. Alternatively, with the help of a series expansion of the new TDEXX eigenvalue equation, standard eigensolvers for large regular eigenvalue problems, e.g., the standard Davidson algorithm, can be used to efficiently calculate the lowest excitation energies. With the help of the series expansion as well, the relation between the TDEXX method and time-dependent Hartree-Fock is analyzed. Several ways to take into account correlation in addition to the exact treatment of exchange in the TDEXX method are discussed, e.g., a scaling of the Kohn-Sham eigenvalues, the inclusion of (semi)local approximate correlation potentials, or hybrids of the exact-exchange kernel with kernels within the adiabatic local density approximation. The lowest lying excitations of the molecules ethylene, acetaldehyde, and pyridine are considered as examples.     

Analytical second-order geometrical derivatives of energy for the self-consistent-charge density-functional tight-binding method

Analytical formulation of the second-order geometrical derivatives of energy for the self-consistent-charge density-functional tight-binding (SCC-DFTB) method is presented. To test its quality and numerical performance, the derived formalism has been coded and applied for calculation of harmonic vibrational frequencies for a set of 17 small and medium size molecules. For this set, the average absolute deviation from experiment is 99 cm(-1) for SCC-DFTB vs 62 cm(-1) for the M?ller-Plesset second-order perturbation theory with the cc-pVDZ basis set (MP2/cc-pVDZ) and 32 cm(-1) for the B3LYP density functional method with the same basis set (B3LYP/cc-pVDZ), while the maximal deviation is 465 cm(-1) vs 1,741 cm(-1) for MP2/cc-pVDZ and 112 cm(-1) for B3LYP/cc-pVDZ. The SCC-DFTB results are in reasonable agreement with experiments as well as with ab initio and density-functional results, and are better than other semiempirical methods. The SCC-DFTB method allows for considerable computational time saving when compared to other methods while retaining similar overall accuracy. Data for a series of conjugated polyenes show that an analytical formulation of SCC-DFTB is noticeably faster than its numerical formulation.     

The reaction rate for dissociative adsorption of N2 on stepped Ru(0001): six-dimensional quantum calculations

Quantum-mechanical calculations of the reaction rate for dissociative adsorption of N2 on stepped Ru(0001) are presented. Converged six-dimensional quantum calculations for this heavy-atom reaction have been performed using the multiconfiguration time-dependent Hartree method. A potential-energy surface for the transition-state region is constructed from density-functional theory calculations using Shepard interpolation. The quantum results are in very good agreement with the results of the harmonic transition-state theory. In contrast to the findings of previous model calculations on similar systems, the tunneling effect is found to be small.     

Laplace-transformed diagonal Dyson correction to quasiparticle energies in periodic systems

We present a method to self-consistently evaluate quasiparticle energies of periodic systems within the diagonal approximation for solving Dyson's equation. Our method is based on the Laplace transform of the second-order M?ller-Plesset perturbation (MP2) theory kernel in the atomic basis formulation. The overhead computational cost of evaluating the fully self-consistent diagonal correction over the MP2 band energy calculation is negligible. We present numerical benchmark results for the band structure of trans-polyacetylene and compare it with MP2 and other approaches.     

Finite lifetime effects on the polarizability within time-dependent density-functional theory

We present an implementation for considering finite lifetime of the electronic excited states into linear-response theory within time-dependent density-functional theory. The lifetime of the excited states is introduced by a common phenomenological damping factor. The real and imaginary frequency-dependent polarizabilities can thus be calculated over a broad range of frequencies. This allows for the study of linear-response properties both in the resonance and nonresonance cases. The method is complementary to the standard approach of calculating the excitation energies from the poles of the polarizability. The real and imaginary polarizabilities can then be calculated in any specific energy range of interest, in contrast to the excitation energies which are usually solved only for the lowest electronic states. We have verified the method by investigating the photoabsorption properties of small alkali clusters. For these systems, we have calculated the real and imaginary polarizabilities in the energy range of 1-4 eV and compared these with excitation energy calculations. The results showed good agreement with both previous theoretical and experimental results.     

Time-dependent four-component relativistic density-functional theory for excitation energies. II. The exchange-correlation kernel

We extend our previous formulation of time-dependent four-component relativistic density-functional theory [J. Gao, W. Liu, B. Song, and C. Liu, J. Chem. Phys. 121, 6658 (2004)] by using a noncollinear form for the exchange-correlation kernel. The new formalism can deal with excited states involving moment (spin)-flipped configurations which are otherwise not accessible with ordinary exchange-correlation functionals. As a first application, the global potential-energy curves of 16 low-lying omega omega-coupled electronic states of the AuH molecule have been investigated. The derived spectroscopic parameters, including the adiabatic and vertical excitation energies, equilibrium bond lengths, harmonic and anharmonic vibrational constants, fundamental frequencies, and dissociation energies, are grossly in good agreement with those of ab initio multireference second-order perturbation theory and the available experimental data.     

Efficient linear-response method circumventing the exchange-correlation kernel: theory for molecular conductance under finite bias

An iterative approach for calculating the frequency domain linear response of molecular systems within time-dependent density-functional theory is presented. The method completely avoids computing the exchange-correlation kernel which is typically the most expensive step for large systems. In particular, virtual orbitals are not needed. This approach may be useful for treating the response of large systems. We give an outline of the theory and a demonstration on a jellium model of an elliptic gold cluster. A detailed theory is appended discussing the computation of conductance and ac impedance of molecular junctions under bias.     

A simplified relativistic time-dependent density-functional theory formalism for the calculations of excitation energies including spin-orbit coupling effect

In the present work we have proposed an approximate time-dependent density-functional theory (TDDFT) formalism to deal with the influence of spin-orbit coupling effect on the excitation energies for closed-shell systems. In this formalism scalar relativistic TDDFT calculations are first performed to determine the lowest single-group excited states and the spin-orbit coupling operator is applied to these single-group excited states to obtain the excitation energies with spin-orbit coupling effects included. The computational effort of the present method is much smaller than that of the two-component TDDFT formalism and this method can be applied to medium-size systems containing heavy elements. The compositions of the double-group excited states in terms of single-group singlet and triplet excited states are obtained automatically from the calculations. The calculated excitation energies based on the present formalism show that this formalism affords reasonable excitation energies for transitions not involving 5p and 6p orbitals. For transitions involving 5p orbitals, one can still obtain acceptable results for excitations with a small truncation error, while the formalism will fail for transitions involving 6p orbitals, especially 6p1/2 spinors.     

Analytical excited state forces for the time-dependent density-functional tight-binding method

An analytical formulation for the geometrical derivatives of excitation energies within the time-dependent density-functional tight-binding (TD-DFTB) method is presented. The derivation is based on the auxiliary functional approach proposed in [Furche and Ahlrichs, J Chem Phys 2002, 117, 7433]. To validate the quality of the potential energy surfaces provided by the method, adiabatic excitation energies, excited state geometries, and harmonic vibrational frequencies were calculated for a test set of molecules in excited states of different symmetry and multiplicity. According to the results, the TD-DFTB scheme surpasses the performance of configuration interaction singles and the random phase approximation but has a lower quality than ab initio time-dependent density-functional theory. As a consequence of the special form of the approximations made in TD-DFTB, the scaling exponent of the method can be reduced to three, similar to the ground state. The low scaling prefactor and the satisfactory accuracy of the method makes TD-DFTB especially suitable for molecular dynamics simulations of dozens of atoms as well as for the computation of luminescence spectra of systems containing hundreds of atoms.     

Molecular structure,conformational stability,energetic and intramolecular hydrogen bonding in ground,and electronic excited state of 3-mercapto propeneselenal

In the present work, a conformational analysis of 3-mercapto propeneselenal is performed using several computational methods, including DFT (B3LYP), MP2, and G2MP2. At the DFT and G2MP2 levels the most stable conformers of title compound are characterized by an extended backbone structure, minimizing the steric repulsions between the sulfur and selenium lone pairs. Two conformers exhibit hydrogen bonding. This feature, although not being the dominant factor in energetic terms, appears to be of foremost importance to define the geometry of the molecule. The influence of the solvent on the stability order of conformers and the strength of intramolecular hydrogen bonding was considered using the PCM, SCI–PCM, and IEF–PCM methods. The results of analysis by quantum theory of “Atoms in Molecules” and natural bond orbital method fairly support the DFT results. The calculated HOMO and LUMO energies showed that charge transfer occurs within the molecule. Further verification of the obtained transition state structures was implemented via intrinsic reaction coordinate analysis. Calculations of the ¹H NMR chemical shift at GIAO/B3LYP/6–311++G** levels of theory are also presented. The excited-state properties of intramolecular hydrogen bonding in hydrogen-bonded systems have been investigated theoretically using the time-dependent density functional theory method.     

The quantum defect: the true measure of time-dependent density-functional results for atoms

Quantum defect theory is applied to (time-dependent) density-functional calculations of Rydberg series for closed shell atoms: He, Be, and Ne. The performance and behavior of such calculations are much better quantified and understood in terms of the quantum defect rather than transition energies.     

Theoretical study of singlet and triplet excitation energies in oligothiophenes

We have analyzed singlet and triplet excitation energies in oligothiophenes (up to five rings) using time-dependent density-functional theory (TD-DFT) with different exchange-correlation functionals and compared them with results from the approximate coupled-cluster singles and doubles model (CC2) and experimental data. The excitation energies have been calculated in geometries obtained by TD-DFT optimization of the lowest excited singlet state and in the ground-state geometries of the neutral and anionic systems. TD-DFT methods underestimate photoluminescence energies but the energy difference between singlet and triplet states shows trends with the chain-length similar to CC2. We find that the second triplet excited state is below the first singlet excited state for long oligomers in contrast with the previous assignment of Rentsch et al. (Phys.Chem. Chem. Phys. 1999, 1, 1707). Their photodetachment photoelectron spectroscopy measurements are better described by considering higher triplet excited states.     

Approximations to complete basis set-extrapolated, highly correlated non-covalent interaction energies

The first-principles calculation of non-covalent (particularly dispersion) interactions between molecules is a considerable challenge. In this work we studied the binding energies for ten small non-covalently bonded dimers with several combinations of correlation methods (MP2, coupled-cluster single double, coupled-cluster single double (triple) (CCSD(T))), correlation-consistent basis sets (aug-cc-pVXZ, X = D, T, Q), two-point complete basis set energy extrapolations, and counterpoise corrections. For this work, complete basis set results were estimated from averaged counterpoise and non-counterpoise-corrected CCSD(T) binding energies obtained from extrapolations with aug-cc-pVQZ and aug-cc-pVTZ basis sets. It is demonstrated that, in almost all cases, binding energies converge more rapidly to the basis set limit by averaging the counterpoise and non-counterpoise corrected values than by using either counterpoise or non-counterpoise methods alone. Examination of the effect of basis set size and electron correlation shows that the triples contribution to the CCSD(T) binding energies is fairly constant with the basis set size, with a slight underestimation with CCSD(T)∕aug-cc-pVDZ compared to the value at the (estimated) complete basis set limit, and that contributions to the binding energies obtained by MP2 generally overestimate the analogous CCSD(T) contributions. Taking these factors together, we conclude that the binding energies for non-covalently bonded systems can be accurately determined using a composite method that combines CCSD(T)∕aug-cc-pVDZ with energy corrections obtained using basis set extrapolated MP2 (utilizing aug-cc-pVQZ and aug-cc-pVTZ basis sets), if all of the components are obtained by averaging the counterpoise and non-counterpoise energies. With such an approach, binding energies for the set of ten dimers are predicted with a mean absolute deviation of 0.02 kcal/mol, a maximum absolute deviation of 0.05 kcal/mol, and a mean percent absolute deviation of only 1.7%, relative to the (estimated) complete basis set CCSD(T) results. Use of this composite approach to an additional set of eight dimers gave binding energies to within 1% of previously published high-level data. It is also shown that binding within parallel and parallel-crossed conformations of naphthalene dimer is predicted by the composite approach to be 9% greater than that previously reported in the literature. The ability of some recently developed dispersion-corrected density-functional theory methods to predict the binding energies of the set of ten small dimers was also examined.     

Highly Accurate CCSD(T) and DFT–SAPT Stabilization Energies of H‐Bonded and Stacked Structures of the Uracil Dimer

The CCSD(T) interaction energies for the H‐bonded and stacked structures of the uracil dimer are determined at the aug‐cc‐pVDZ and aug‐cc‐pVTZ levels. On the basis of these calculations we can construct the CCSD(T) interaction energies at the complete basis set (CBS) limit. The most accurate energies, based either on direct extrapolation of the CCSD(T) correlation energies obtained with the aug‐cc‐pVDZ and aug‐cc‐pVTZ basis sets or on the sum of extrapolated MP2 interaction energies (from aug‐cc‐pVTZ and aug‐cc‐pVQZ basis sets) and extrapolated ΔCCSD(T) correction terms [difference between CCSD(T) and MP2 interaction energies] differ only slightly, which demonstrates the reliability and robustness of both techniques. The latter values, which represent new standards for the H‐bonding and stacking structures of the uracil dimer, differ from the previously published data for the S22 set by a small amount. This suggests that interaction energies of the S22 set are generated with chemical accuracy. The most accurate CCSD(T)/CBS interaction energies are compared with interaction energies obtained from various computational procedures, namely the SCS–MP2 (SCS: spin‐component‐scaled), SCS(MI)–MP2 (MI: molecular interaction), MP3, dispersion‐augmented DFT (DFT–D), M06–2X, and DFT–SAPT (SAPT: symmetry‐adapted perturbation theory) methods. Among these techniques, the best results are obtained with the SCS(MI)–MP2 method. Remarkably good binding energies are also obtained with the DFT–SAPT method. Both DFT techniques tested yield similarly good interaction energies. The large magnitude of the stacking energy for the uracil dimer, compared to that of the benzene dimer, is explained by attractive electrostatic interactions present in the stacked uracil dimer. These interactions force both subsystems to approach each other and the dispersion energy benefits from a shorter intersystem separation.     

Fluctuation-dissipation theorem density-functional theory

Using the fluctuation-dissipation theorem (FDT) in the context of density-functional theory (DFT), one can derive an exact expression for the ground-state correlation energy in terms of the frequency-dependent density response function. When combined with time-dependent density-functional theory, a new class of density functionals results that use approximations to the exchange-correlation kernel fxc as input. This FDT-DFT scheme holds promise to solve two of the most distressing problems of conventional Kohn-Sham DFT: (i) It leads to correlation energy functionals compatible with exact exchange, and (ii) it naturally includes dispersion. The price is a moderately expensive O(N6) scaling of computational cost and a slower basis set convergence. These general features of FDT-DFT have all been recognized previously. In this paper, we present the first benchmark results for a set of molecules using FDT-DFT beyond the random-phase approximation (RPA)-that is, the first such results with fxc not equal to 0. We show that kernels derived from the adiabatic local-density approximation and other semilocal functionals suffer from an "ultraviolet catastrophe," producing a pair density that diverges at small interparticle distance. Nevertheless, dispersion interactions can be treated accurately if hybrid functionals are employed, as is demonstrated for He2 and HeNe. We outline constraints that future approximations to fxc should satisfy and discuss the prospects of FDT-DFT.     

Comparing ab initio density-functional and wave function theories: the impact of correlation on the electronic density and the role of the correlation potential

The framework of ab initio density-functional theory (DFT) has been introduced as a way to provide a seamless connection between the Kohn-Sham (KS) formulation of DFT and wave-function based ab initio approaches [R. J. Bartlett, I. Grabowski, S. Hirata, and S. Ivanov, J. Chem. Phys. 122, 034104 (2005)]. Recently, an analysis of the impact of dynamical correlation effects on the density of the neon atom was presented [K. Jankowski, K. Nowakowski, I. Grabowski, and J. Wasilewski, J. Chem. Phys. 130, 164102 (2009)], contrasting the behaviour for a variety of standard density functionals with that of ab initio approaches based on second-order M?ller-Plesset (MP2) and coupled cluster theories at the singles-doubles (CCSD) and singles-doubles perturbative triples [CCSD(T)] levels. In the present work, we consider ab initio density functionals based on second-order many-body perturbation theory and coupled cluster perturbation theory in a similar manner, for a range of small atomic and molecular systems. For comparison, we also consider results obtained from MP2, CCSD, and CCSD(T) calculations. In addition to this density based analysis, we determine the KS correlation potentials corresponding to these densities and compare them with those obtained for a range of ab initio density functionals via the optimized effective potential method. The correlation energies, densities, and potentials calculated using ab initio DFT display a similar systematic behaviour to those derived from electronic densities calculated using ab initio wave function theories. In contrast, typical explicit density functionals for the correlation energy, such as VWN5 and LYP, do not show behaviour consistent with this picture of dynamical correlation, although they may provide some degree of correction for already erroneous explicitly density-dependent exchange-only functionals. The results presented here using orbital dependent ab initio density functionals show that they provide a treatment of exchange and correlation contributions within the KS framework that is more consistent with traditional ab initio wave function based methods.     

A new scheme for determining the intramolecular seven-membered ring N-H...O=C hydrogen-bonding energies of glycine and alanine peptides

In this paper a new scheme was proposed to calculate the intramolecular hydrogen-bonding energies in peptides and was applied to calculate the intramolecular seven-membered ring N-H...O=C hydrogen-bonding energies of the glycine and alanine peptides. The density-functional theory B3LYP6-31G(d) and B3LYP6-311G(d,p) methods and the second-order Moller-Plesset perturbation theory MP26-31G(d) method were used to calculate the optimal geometries and frequencies of glycine and alanine peptides and related structures. MP26-311++G(d,p), MP26-311++G(3df,2p), and MP2/aug-cc-pVTZ methods were then used to evaluate the single-point energies. It was found that the B3LYP6-31G(d), MP26-31G(d), and B3LYP6-311G(d,p) methods yield almost similar structural parameters for the conformers of the glycine and alanine dipeptides. MP2/aug-cc-pVTZ predicts that the intramolecular seven-membered ring N-H...O=C hydrogen-bonding strength has a value of 5.54 kcal/mol in glycine dipeptide and 5.73 and 5.19 kcal/mol in alanine dipeptides, while the steric repulsive interactions of the seven-membered ring conformers are 4.13 kcal/mol in glycine dipeptide and 6.62 and 3.71 kcal/mol in alanine dipeptides. It was also found that MP26-311++G(3df,2p) gives as accurate intramolecular N-H...O=C hydrogen-bonding energies and steric repulsive interactions as the much more costly MP2/aug-cc-pVTZ does.