Synthesis,characterization, and reactivity of cationic hydride [HPd(diphosphine)(2)](+)CF(3)SO(3)(-), the missing member of the family [HM(dppe)(2)](+)X(-) (M = Ni,Pd, Pt). DFT QM/MM structural predictions for the [HPd(dppe)(2)](+) moiety

The synthesis, characterization, and properties of the cationic hydride [HPd(dppe)(2)](+)CF(3)SO3(-).1/8THF, the missing member of the family [HM(dppe)(2)](+)X(-) (M = Ni, Pd, Pt), are described. The Pd hydride is not stable in solution and may react as either a proton or a hydride donor. DFT QM/MM calculations of the [HPd(dppe)(2)](+) moiety have allowed us to predict its structure and reactivity.     

Proton transfer to nickel-thiolate complexes. 1. Protonation of [Ni(SC(6)H(4)R-4)(2)(Ph(2)PCH(2)CH(2)PPh(2))] (R = Me, MeO, H, Cl, or NO(2))

The kinetics of the equilibrium reaction between [Ni(SC(6)H(4)R-4)(2)(dppe)] (R= MeO, Me, H, Cl, or NO(2); dppe = Ph(2)PCH(2)CH(2)PPh(2)) and mixtures of [lutH](+) and lut (lut = 2,6-dimethylpyridine) in MeCN to form [Ni(SHC(6)H(4)R-4)(SC(6)H(4)R-4)(dppe)](+) have been studied using stopped-flow spectrophotometry. The kinetics for the reactions with R = MeO, Me, H, or Cl are consistent with a single-step equilibrium reaction. Investigation of the temperature dependence of the reactions shows that DeltaG = 13.6 +/- 0.3 kcal mol(-)(1) for all the derivatives but the values of DeltaH and DeltaS vary with R (R = MeO, DeltaH() = 8.5 kcal mol(-)(1), DeltaS = -16 cal K(-)(1) mol(-)(1); R = Me, DeltaH() = 10.8 kcal mol(-)(1), DeltaS = -9.5 cal K(-)(1) mol(-)(1); R = Cl, DeltaH = 23.7 kcal mol(-)(1), DeltaS = +33 cal K(-)(1) mol(-)(1)). With [Ni(SC(6)H(4)NO(2)-4)(2)(dppe)] a more complicated rate law is observed consistent with a mechanism in which initial hydrogen-bonding of [lutH](+) to the complex precedes intramolecular proton transfer. It seems likely that all the derivatives operate by this mechanism, but only with R = NO(2) (the most electron-withdrawing substituent) does the intramolecular proton transfer step become sufficiently slow to result in the change in kinetics. Studies with [lutD](+) show that the rates of proton transfer to [Ni(SC(6)H(4)R-4)(2)(dppe)] (R = Me or Cl) are associated with negligible kinetic isotope effect. The possible reasons for this are discussed. The rates of proton transfer to [Ni(SC(6)H(4)R-4)(2)(dppe)] vary with the 4-R-substituent, and the Hammett plot is markedly nonlinear. This unusual behavior is attributable to the electronic influence of R which affects the electron density at the sulfur.     

Heterolytic activation of hydrogen as a trigger for iridium complex promoted activation of carbon-fluorine bonds

The cationic iridium(III) complex [IrCF(3)(CO)(dppe)(DIB)][BARF](2) where DIB = o-diiodobenzene, dppe = 1,2-bis(diphenylphosphino)ethane, and BARF = B(3,5-(CF(3))(2)C(6)H(3))(4)(-) undergoes reaction in the presence of dihydrogen to form [IrH(2)(CO)(2)(dppe)](+) as the major product. Through labeling studies and (1)H and (31)P[(1)H] NMR spectroscopies including parahydrogen measurements, it is shown that the reaction involves conversion of the coordinated CF(3) ligand into carbonyl. In this reaction sequence, the initial step is the heterolytic activation of dihydrogen, leading to proton generation which promotes alpha-C-F bond cleavage. Polarization occurs in the final [IrH(2)(CO)(2)(dppe)](+) product by the reaction of H(2) with the Ir(I) species [Ir(CO)(2)(dppe)](+) that is generated in the course of the CF(3) --> CO conversion.     

Comprehensive thermodynamic characterization of the metal-hydrogen bond in a series of cobalt-hydride complexes

A detailed structural and thermodynamic study of a series of cobalt-hydride complexes is reported. This includes structural studies of [H(2)Co(dppe)(2)](+), HCo(dppe)(2), [HCo(dppe)(2)(CH(3)CN)](+), and [Co(dppe)(2)(CH(3)CN)](2+), where dppe = bis(diphenylphosphino)ethane. Equilibrium measurements are reported for one hydride- and two proton-transfer reactions. These measurements and the determinations of various electrochemical potentials were used to determine 11 of 12 possible homolytic and heterolytic solution Co-H bond dissociation free energies of [H(2)Co(dppe)(2)](+) and its monohydride derivatives. These values provide a useful framework for understanding observed and potential reactions of these complexes. These reactions include the disproportionation of [HCo(dppe)(2)](+) to form [Co(dppe)(2)](+) and [H(2)Co(dppe)(2)](+), the reaction of [Co(dppe)(2)](+) with H(2), the protonation and deprotonation reactions of the various hydride species, and the relative ability of the hydride complexes to act as hydride donors.     

Generation, characterization, and electrochemical behavior of the palladium-hydride cluster [Pd3(dppm)3(mu3-CO)(mu3-H)]+ (dppm=Bis(diphenylphosphinomethane)

Addition of formate on the dicationic cluster [Pd(3)(dppm)(3)(mu(3)-CO)](2+) (dppm=bis(diphenylphosphinomethane) affords quantitatively the hydride cluster [Pd(3)(dppm)(3)(mu(3)-CO)(mu(3)-H)](+). This new palladium-hydride cluster has been characterised by (1)H NMR, (31)P NMR and UV/Vis spectroscopy and MALDI-TOF mass spectrometry. The unambiguous identification of the capping hydride was made from (2)H NMR spectroscopy by using DCO(2) (-) as starting material. The mechanism of the hydride complex formation was investigated by UV/Vis stopped-flow methods. The kinetic data are consistent with a two-step process involving: 1) host-guest interactions between HCO(2) (-) and [Pd(3)(dppm)(3)(mu(3)-CO)](2+) and 2) a reductive elimination of CO(2). Two alternatives routes to the hydride complex were also examined : 1) hydride transfer from NaBH(4) to [Pd(3)(dppm)(3)(mu(3)-CO)](2+) and 2) electrochemical reduction of [Pd(3)(dppm)(3)(mu(3)-CO)](2+) to [Pd(3)(dppm)(3)(mu(3)-CO)](0) followed by an addition of one equivalent of H(+). Based on cyclic voltammetry, evidence for a dual mechanism (ECE and EEC; E=electrochemical (one-electron transfer), C=chemical (hydride dissociation)) for the two-electron reduction of [Pd(3)(dppm)(3)(mu(3)-CO)(mu(3)-H)](+) to [Pd(3)(dppm)(3)(mu(3)-CO)](0) is provided, corroborated by digital simulation of the experimental results. Geometry optimisations of the [Pd(3)(H(2)PCH(2)PH(2))(3)(mu(3)-CO)(mu(3)-H)](n) model clusters were performed by using DFT at the B3 LYP level. Upon one-electron reductions, the Pd--Pd distance increases from a formal single bond (n=+1), to partially bonding (n=0), to weak metal-metal interactions (n=-1), while the Pd--H bond length remains relatively the same.     

Synthesis and structure of CpMo(CO)(dppe)H and its oxidation by Ph3C+

The reaction of CpMo(CO)(dppe)Cl (dppe = Ph2PCH2CH2PPh2) with Na+[AlH2(OCH2CH2OCH3)2]- gives the molybdenum hydride complex CpMo(CO)(dppe)H, the structure of which was determined by X-ray crystallography. Electrochemical oxidation of CpMo(CO)(dppe)H in CH3CN is quasi-reversible, with the peak potential at -0.15 V (vs Fc/Fc+). The reaction of CpMo(CO)(dppe)H with 1 equiv of Ph3C+BF4- in CD3CN gives [CpMo(CO)(dppe)(NCCD3)]+ as the organometallic product, along with dihydrogen and Gomberg's dimer (which is formed by dimerization of Ph3C.). The proposed mechanism involves one-electron oxidation of CpMo(CO)(dppe)H by Ph3C+ to give the radical-cation complex [CpMo(CO)(dppe)H].+. Proton transfer from [CpMo(CO)(dppe)H].+ to CpMo(CO)(dppe)H, loss of dihydrogen from [CpMo(CO)(dppe)(H)2]+, and oxidation of Cp(CO)(dppe)Mo. by Ph3C+ lead to the observed products. In the presence of an amine base, the stoichiometry changes, with 2 equiv of Ph3C+ being required for each 1 equiv of CpMo(CO)(dppe)H because of deprotonation of [CpMo(CO)(dppe)H].+ by the amine. Protonation of CpMo(CO)(dppe)H by HOTf provides the dihydride complex [CpMo(CO)(dppe)(H)2]+OTf-, which loses dihydrogen to generate CpMo(CO)(dppe)(OTf).     

Reactions of (di)manganese carbonyl ions with 1,4,7-trimethyl-1,4,7-triazacyclononane (Me3TACN) in the gas phase

The gas-phase reactions of a series of (di)manganese carbonyl positive ions with 1,4,7-trimethyl-1,4,7-triazacyclononane (Me(3)TACN) have been examined with the aid of Fourier transform ion cyclotron resonance (FTICR) mass spectrometry. The monomanganese carbonyl ions, [Mn(CO)(n)](+) (n = 2-5), react predominantly by ligand exchange and to a minor extent by electron transfer with the formation of the radical cation of Me(3)TACN. For the [Mn(CO)(n)](+) (n = 2-4) ions, the ligand exchange results in the exclusive formation of a [Mn(Me(3)TACN)](+) complex, whereas small amounts of [Mn(CO)(Me(3)TACN)](+) ions are also generated in the reactions of the [Mn(CO)(5)](+) ion. The [Mn(2)(CO)(n)](+) ions (n = 2, 4 and 5) react also by competing electron transfer and ligand exchange. The reaction of the [Mn(2)(CO)(2)](+) and [Mn(2)(CO)(4)](+) ions is associated with cleavage of the Mn--Mn bond as evidenced by the pronounced formation of [Mn(Me(3)TACN)](+) ions. For [Mn(2)(CO)(5)](+), the ligand exchange leads mainly to the formation of [Mn(2)(CO)(n)(Me(3)TACN)](+) (n = 1-3) ions. These primary product ions react subsequently by the incorporation of a second Me(3)TACN molecule to afford [Mn(2)(CO)(Me(3)TACN)(2)](+) and [Mn(2)(CO)(2)(Me(3)TACN)(2)](+) ions. Both of these latter species incorporate an oxygen molecule with formation of ions with the assigned composition of [Mn(2)(O(2))(CO)(Me(3)TACN)(2)](+) and [Mn(2)(O(2))(CO)(2)(Me(3)TACN)(2)](+).     

Mechanistic investigation of CO2 hydrogenation by Ru(II) and Ir(III) aqua complexes under acidic conditions: two catalytic systems differing in the nature of the rate determining step

Ruthenium aqua complexes [(eta(6)-C(6)Me(6))Ru(II)(L)(OH(2))](2+) {L = bpy (1) and 4,4'-OMe-bpy (2), bpy = 2,2'-bipyridine, 4,4'-OMe-bpy = 4,4'-dimethoxy-2,2'-bipyridine} and iridium aqua complexes [Cp*Ir(III)(L)(OH(2))](2+) {Cp* = eta(5)-C(5)Me(5), L = bpy (5) and 4,4'-OMe-bpy (6)} act as catalysts for hydrogenation of CO(2) into HCOOH at pH 3.0 in H(2)O. The active hydride catalysts cannot be observed in the hydrogenation of CO(2) with the ruthenium complexes, whereas the active hydride catalysts, [Cp*Ir(III)(L)(H)](+) {L = bpy (7) and 4,4'-OMe-bpy (8)}, have successfully been isolated after the hydrogenation of CO(2) with the iridium complexes. The key to the success of the isolation of the active hydride catalysts is the change in the rate-determining step in the catalytic hydrogenation of CO(2) from the formation of the active hydride catalysts, [(eta(6)-C(6)Me(6))Ru(II)(L)(H)](+), to the reactions of [Cp*Ir(III)(L)(H)](+) with CO(2), as indicated by the kinetic studies.     

First investigation of non-classical dihydrogen bonding between an early transition-metal hydride and alcohols: IR, NMR, and DFT approach

The interaction of [NbCp(2)H(3)] with fluorinated alcohols to give dihydrogen-bonded complexes was studied by a combination of IR, NMR and DFT methods. IR spectra were examined in the range from 200-295 K, affording a clear picture of dihydrogen-bond formation when [NbCp(2)H(3)]/HOR(f) mixtures (HOR(f) = hexafluoroisopropanol (HFIP) or perfluoro-tert-butanol (PFTB)) were quickly cooled to 200 K. Through examination of the OH region, the dihydrogen-bond energetics were determined to be 4.5+/-0.3 kcal mol(-1) for TFE (TFE = trifluoroethanol) and 5.7+/-0.3 kcal mol(-1) for HFIP. (1)H NMR studies of solutions of [NbCp(2)H(2)(B)H(A)] and HFIP in [D(8)]toluene revealed high-field shifts of the hydrides H(A) and H(B), characteristic of dihydrogen-bond formation, upon addition of alcohol. The magnitude of signal shifts and T(1) relaxation time measurements show preferential coordination of the alcohol to the central hydride H(A), but are also consistent with a bifurcated character of the dihydrogen bonding. Estimations of hydride-proton distances based on T(1) data are in good accord with the results of DFT calculations. DFT calculations for the interaction of [NbCp(2)H(3)] with a series of non-fluorinated (MeOH, CH(3)COOH) and fluorinated (CF(3)OH, TFE, HFIP, PFTB and CF(3)COOH) proton donors of different strengths showed dihydrogen-bond formation, with binding energies ranging from -5.7 to -12.3 kcal mol(-1), depending on the proton donor strength. Coordination of proton donors occurs both to the central and to the lateral hydrides of [NbCp(2)H(3)], the former interaction being of bifurcated type and energetically slightly more favourable. In the case of the strong acid H(3)O(+), the proton transfer occurs without any barrier, and no dihydrogen-bonded intermediates are found. Proton transfer to [NbCp(2)H(3)] gives bis(dihydrogen) [NbCp(2)(eta(2)-H(2))(2)](+) and dihydride(dihydrogen) complexes [NbCp(2)(H)(2)(eta(2)-H(2))](+) (with lateral hydrides and central dihydrogen), the former product being slightly more stable. When two molecules of TFA were included in the calculations, in addition to the dihydrogen-bonded adduct, an ionic pair formed by the cationic bis(dihydrogen) complex [NbCp(2)(eta(2)-H(2))(2)](+) and the homoconjugated anion pair (CF(3)COO...H...OOCCF(3))(-) was found as a minimum. It is very likely that these ionic pairs may be intermediates in the H/D exchange between the hydride ligands and the OD group observed with the more acidic alcohols in the NMR studies.     

Proton transfer to nickel-thiolate complexes. 2. Rate-limiting intramolecular proton transfer in the reactions of [Ni(SC(6)H(4)R-4)(PhP[CH(2)CH(2)PPh(2)](2))](+) (R = NO(2), Cl, H, Me, or MeO)

The protonation of [Ni(SC(6)H(4)R-4)(triphos)](+) (triphos = PhP[CH(2)CH(2)PPh(2)](2); R = NO(2), Cl, H, Me, or MeO) by [lutH](+) (lut = 2,6-dimethylpyridine) to form [Ni(S(H)C(6)H(4)R-4)(triphos)](2+) is an equilibrium reaction in MeCN. Kinetic studies, using stopped-flow spectrophotometry, reveal that the reactions occur by a two-step mechanism. Initially, [lutH](+) rapidly binds to the complex (K(2)(R)) in an interaction which probably involves hydrogen-bonding of the acid to the sulfur. Subsequent intramolecular proton transfer from [lutH](+) to sulfur (k(3)(R)) is slow because of both electronic and steric factors. The X-ray crystal structures of [Ni(SC(6)H(4)R-4)(triphos)](+) (R = NO(2), H, Me, or MeO) show that all are best described as square-planar complexes, with the phenyl substituents of the triphos ligand presenting an appreciable barrier to the approach of the sterically demanding [lutH](+) to the sulfur. The kinetic characteristics of the intramolecular proton transfer from [lutH](+) to sulfur have been investigated. The rate of intramolecular proton transfer exhibits a nonlinear dependence on Hammett sigma(+), with both electron-releasing and electron-withdrawing 4-R-substituents on the coordinated thiolate facilitating the rate of proton transfer (NO(2) > Cl > H > Me < MeO). The rate constants for intramolecular proton transfer correlate well with the calculated electron density of the sulfur. The temperature dependence of the rate of the intramolecular proton transfer reactions shows that deltaH() is small but increases as the 4-R-substituent becomes more electron-withdrawing [deltaH = 4.1 (MeO), 6.9 (Me), 11.4 kcal mol(-)(1) (NO(2))], while DeltaS() becomes progressively less negative [deltaS = -50.1 (MeO), -41.2 (Me), -16.4 (NO(2)) cal K(-)(1) mol(-)(1)]. Studies with [lutD](+) show that the rate of intramolecular proton transfer varies with the 4-R-substituent [(k(3)(NO)2)(H)/(k(3)(NO)2)(D) = 0.39; (k(3)(Cl))(H)/(k(3)(Cl))(D) = 0.88; (k(3)(Me))(H)/(k(3)(Me))(D) = 1.3; (k(3)(MeO))(H)/(k(3)(MeO))(D) = 1.2].     

Equilibrium thermodynamic studies in water: reactions of dihydrogen with rhodium(III) porphyrins relevant to Rh-Rh, Rh-H, and Rh-OH bond energetics

Aqueous solutions of rhodium(III) tetra p-sulfonatophenyl porphyrin ((TSPP)Rh(III)) complexes react with dihydrogen to produce equilibrium distributions between six rhodium species including rhodium hydride, rhodium(I), and rhodium(II) dimer complexes. Equilibrium thermodynamic studies (298 K) for this system establish the quantitative relationships that define the distribution of species in aqueous solution as a function of the dihydrogen and hydrogen ion concentrations through direct measurement of five equilibrium constants along with dissociation energies of D(2)O and dihydrogen in water. The hydride complex ([(TSPP)Rh-D(D(2)O)](-4)) is a weak acid (K(a)(298 K) = (8.0 +/- 0.5) x 10(-8)). Equilibrium constants and free energy changes for a series of reactions that could not be directly determined including homolysis reactions of the Rh(II)-Rh(II) dimer with water (D(2)O) and dihydrogen (D(2)) are derived from the directly measured equilibria. The rhodium hydride (Rh-D)(aq) and rhodium hydroxide (Rh-OD)(aq) bond dissociation free energies for [(TSPP)Rh-D(D(2)O)](-4) and [(TSPP)Rh-OD(D(2)O)](-4) in water are nearly equal (Rh-D = 60 +/- 3 kcal mol(-1), Rh-OD = 62 +/- 3 kcal mol(-1)). Free energy changes in aqueous media are reported for reactions that substitute hydroxide (OD(-)) (-11.9 +/- 0.1 kcal mol(-1)), hydride (D(-)) (-54.9 kcal mol(-1)), and (TSPP)Rh(I): (-7.3 +/- 0.1 kcal mol(-1)) for a water in [(TSPP)Rh(III)(D(2)O)(2)](-3) and for the rhodium hydride [(TSPP)Rh-D(D(2)O)](-4) to dissociate to produce a proton (9.7 +/- 0.1 kcal mol(-1)), a hydrogen atom (approximately 60 +/- 3 kcal mol(-1)), and a hydride (D(-)) (54.9 kcal mol(-1)) in water.     

Experimental and computational studies of hydrogen bonding and proton transfer to [Cp*Fe(dppe)H

The present contribution reports experimental and computational investigations of the interaction between [Cp*Fe(dppe)H] and different proton donors (HA). The focus is on the structure of the proton transfer intermediates and on the potential energy surface of the proton transfer leading to the dihydrogen complex [Cp*Fe(dppe)(H2)]+. With p-nitrophenol (PNP) a UV/Visible study provides evidence of the formation of the ion-pair stabilized by a hydrogen bond between the nonclassical cation [Cp*Fe(dppe)(H2)]+ and the homoconjugated anion ([AHA]-). With trifluoroacetic acid (TFA), the hydrogen-bonded ion pair containing the simple conjugate base (A-) in equilibrium with the free ions is observed by IR spectroscopy when using a deficit of the proton donor. An excess leads to the formation of the homoconjugated anion. The interaction with hexafluoroisopropanol (HFIP) was investigated quantitatively by IR spectroscopy and by 1H and 31P NMR spectroscopy at low temperatures (200-260 K) and by stopped-flow kinetics at about room temperature (288-308 K). The hydrogen bond formation to give [Cp*Fe(dppe)H]HA is characterized by DeltaH degrees =-6.5+/-0.4 kcal mol(-1) and DeltaS degrees = -18.6+/-1.7 cal mol(-1) K(-1). The activation barrier for the proton transfer step, which occurs only upon intervention of a second HFIP molecule, is DeltaH(not equal) = 2.6+/-0.3 kcal mol(-1) and DeltaS(not equal) = -44.5+/-1.1 cal mol(-1) K(-1). The computational investigation (at the DFT/B3 LYP level with inclusion of solvent effects by the polarizable continuum model) reproduces all the qualitative findings, provided the correct number of proton donor molecules are used in the model. The proton transfer process is, however, computed to be less exothermic than observed in the experiment.     

Reactions of the dianion [1,1,1-(CO)3-2-Ph-closo-1,2-MnCB9H9]2- with transition-metal cations: facile insertion and then extrusion of cluster vertexes

The manganacarborane dianion in [N(PPh(3))(2)][NEt(4)][1,1,1-(CO)(3)-2-Ph-closo-1,2-MnCB(9)H(9)] (1b) reacts with cationic transition metal-ligand fragments to give products in which the electrophilic metal groups (M') are exo-polyhedrally attached to the {closo-1,2-MnCB(9)} cage system via three-center two-electron B-H --> M' linkages and generally also by Mn-M' bonds. With {Cu(PPh(3))}(+), the Cu-Mn-Cu trimetallic species [1,6-{Cu(PPh(3))}-1,7-{Cu(PPh(3))}-6,7-(mu-H)(2)-1,1,1-(CO)(3)-2-Ph-closo-1,2-MnCB(9)H(7)] (3a) is formed, whereas reactions with {M'(dppe)}(2+) (M' = Ni, Pd; dppe = Ph(2)PCH(2)CH(2)PPh(2)) give [1,3-{Ni(dppe)}-3-(mu-H)-1,1,1-(CO)(3)-2-Ph-closo-1,2-MnCB(9)H(8)] (5a) and [1,3,6-{Pd(dppe)}-3,6-(mu-H)(2)-1,1,1-(CO)(3)-2-Ph-closo-1,2-MnCB(9)H(7)] (5b), both of which contain M'-Mn bonds. The latter reaction with M' = Pt affords [3,6-{Pt(dppe)}-3,6-(mu-H)(2)-1,1,1-(CO)(3)-2-Ph-closo-1,2-MnCB(9)H(7)] (6), which lacks a Pt-Mn connectivity. Compound 6 itself spontaneously converts to [1-Ph-2,2,2-(CO)(3)-8,8-(dppe)-hypercloso-8,2,1-PtMnCB(9)H(9)] (7b) and thence to [3,6,7-{Mn(CO)(3)}-3,7-(mu-H)(2)-1-Ph-6,6-(dppe)-closo-6,1-PtCB(8)H(6)] (8). This sequence occurs via initial insertion of the {Pt(dppe)} unit and then extrusion of {Mn(CO)(3)} and one {BH} vertex. In the presence of alcohols ROH, compound 6 is transformed to the 7-OR substituted analogues of 7b. X-ray diffraction studies were essential in elucidating the structures encountered in compounds 5-8 and hence in understanding their behavior.     

The evolution of [[Ph2P(CH2)nPPh2]Pt(mu-S)2Pt[Ph2P(CH2)nPPh2]] (n=2, 3) metalloligands in protic acids: a cascade of sequential reactions

Given the nucleophilicity of the [Pt(2)S(2)] ring, the evolution of [Pt(2)(mu-S)(2)(P intersection P)(2)] (P intersection P=1,2-bis(diphenylphosphino)ethane (dppe), 1,3-bis(diphenylphosphino)propane (dppp)) metalloligands in the presence of the simplest electrophilic species, the proton, has been studied. Combined use of experimental and theoretical data has allowed the whole set of reactions ensuing the protonation of the [Pt(2)S(2)] core to be established. The titration of [Pt(2)(mu-S)(2)(P intersection P)(2)] with HCl or HClO(4) was monitored mainly by (31)P[(1)H] NMR and mass techniques. Characterization of all the species involved was completed with the determination of the crystal structure of [Pt(SH)(2)(P intersection P)], for dppe and dppp, and [Pt(3)(mu(3)-S)(2)(dppp)(3)](PF(6))(2). The first protonation step of the [Pt(2)S(2)] core leads to the stable [Pt(2)(mu-S)(mu-SH)(P intersection P)(2)](+) complex, but the second step implies disintegration of the ring, thus giving rise to various mononuclear species. The subsequent evolution of some of these species allows regeneration of [Pt(2)(mu-S)(mu-SH)(P intersection P)(2)](+), evidencing the cyclic nature of this process. Whereas the reaction pathway is essentially common for both phosphine ligands, dppe and dppp, the different coordinating ability of Cl(-) or ClO(4) (-) determines the nature of the final products, [PtCl(2)(P intersection P)], [Pt(3)(mu(3)-S)(2)(P intersection P)(3)]Cl(2) or [Pt(3)(mu(3)-S)(2)(P intersection P)(3)](ClO(4))(2). DFT calculations have corroborated the thermodynamic feasibility of the reactions proposed on the basis of experimental data.     

Structures and interaction with DNA of ternary palladium(II) complexes: [Pd(Gly)(X)] (Gly=glycine; X=2,2'-bipyridine, 1,10-phenanthroline and 2,2'-bi-pyridylamine)

The structures of the ternary palladium(II) complexes of the formulations [Pd(Gly)(bpy)](+)Cl(-).4H(2)O (Gly=glycine; bpy=2,2'-bipyridine) (1), [Pd(Gly)(phen)](+)Cl(-).4H(2)O (2) (phen=1,10-phenanthroline) and {[Pd(Gly)(bpa)](+)Cl(-)}(2).6H(2)O (3) (bpa=2,2'-bipyridylamine) were determined. All complexes are positively charged and neutralized by the chloride anion located nearby the complexes. The central Pd(II) atoms of the complexes 1, 2 and 3 have a similar distorted square planar coordination geometry, in which each Pd(II) atom is coordinated to two N atoms of the bidentate heterocyclic ligand, and N and O atoms of the bidentate glycine ligand. The interaction of the complexes with calf thymus (CT) DNA was also studied using the fluorescence method. All complexes showed the inhibition of ethidium bromide binding to CT DNA, and the DNA-binding strengths were reflected as the relative order 2>1>3. The remarkable reduction of UV absorption intensity of 2 caused in the presence of DNA suggests the presence of pi-pi stacking interaction between the heterocyclic ring of the phen ligand and nucleobases. The intercalative DNA-binding of 2 is suggested by UV and CD measurements. DNA cleavage studies indicated that the cleavage of the plasmid supercoiled pBR322 DNA in the presence of H(2)O(2) and ascorbic acid could be enhanced by the complexes.     

Ruthenium-catalyzed ionic hydrogenation of iminium cations. Scope and mechanism

Catalysis by CpRu(P-P)H (where P-P is a chelating diphosphine) of the ionic hydrogenation of an iminium cation inolves (1) the transfer of H(-) to form an amine, (2) the coordination of H(2) to the resulting Ru cation, and (3) the transfer of H(+) from the coordinated dihydrogen to the amine formed in (1). With CpRu(dppe)H the principal Ru species during catalysis remains the hydride complex, and H(2) pressure has no effect on either the ee or the turnover frequency. Step (1), H(-) transfer, can be carried out stoichiometrically if the H(2) is replaced by a coordinating solvent. A methyl substituent on the Cp ring decreases the H(-) transfer rate and the turnover frequency slightly. Electron-donating substituents on the phosphine increase the H(-) transfer rate and increase the turnover frequency up to a point: eventually the hydride ligand (i.e., the one in CpRu(dmpe)H) becomes sufficiently basic to deprotonate the iminium cation to the corresponding enamine, and this pre-equilibrium competes with H(-) transfer. Ionic hydrogenation of enamines is possible when a Ru(H(2)) cation (i.e., [CpRu(dppm)(eta(2)-H(2))](+)) is used as the catalyst and the enamine is more basic than the product amine. Ionic hydrogenation of an alpha,beta-unsaturated iminium cation saturates both the C=C and the C=N bonds. A C=N bond is more reactive toward ionic hydrogenation than a C=C one, but in some cases (i.e., CH=CH(2)) the latter may compete with H(2) for a coordination site and decrease the turnover frequency.     

Pendant bases as proton relays in iron hydride and dihydrogen complexes

The complex trans-[HFe(PNP)(dmpm)(CH(3)CN)]BPh(4), 3, (where PNP is Et(2)PCH(2)N(CH(3))CH(2)PEt(2) and dmpm is Me(2)PCH(2)PMe(2)) can be successively protonated in two steps using increasingly strong acids. Protonation with 1 equiv of p-cyanoanilinium tetrafluoroborate in acetone-d(6) at -80 degrees C results in ligand protonation and the formation of endo (4a) and exo (4b) isomers of trans-[HFe(PNHP)(dmpm)(CH(3)CN)](BPh(4))(2). The endo isomer undergoes rapid intramolecular proton/hydride exchange with an activation barrier of 12 kcal/mol. The exo isomer does not exchange. Studies of the reaction of 3 with a weaker acid (anisidinium tetrafluoroborate) in acetonitrile indicate that a rapid intermolecular proton exchange interconverts isomers 4a and 4b, and a pK(a) value of 12 was determined for these two isomers. Protonation of 3 with 2 equiv of triflic acid results in the protonation of both the PNP ligand and the metal hydride to form the dihydrogen complex [(H(2))Fe(PNHP)(dmpm)(CH(3)CN)](3+), 11. Studies of related complexes [HFe(PNP)(dmpm)(CO)](+) (12) and [HFe(depp)(dmpm)(CH(3)CN)](+) (10) (where depp is bis(diethylphosphino)propane) confirm the important roles of the pendant base and the ligand trans to the hydride ligand in the rapid intra- and intermolecular hydride/proton exchange reactions observed for 4. Features required for an effective proton relay and their potential relevance to the iron-only hydrogenase enzymes are discussed.     

钌分子氢配合物催化烯烃的离子氢化

在氢气压力下，钌配合物[^MeCnRuCl(dppe)](O3SCF3)与AgO3SC3在CH2Cl2中反应生成分子氢配合物[^MeCnRu(H2)(dppe)](O3SCF3)2，该分子氢配合物具有催化烯烃离子氢化的活性。原位高压核磁共振研究显示，这种催化离子氢化反应可能是由分子氢配合物向烯烃转移氢质子形成碳正离子引起的。     

Synthesis and investigation of [Cp(PMe(3))Rh(H)(H(2))](+) and its partially deuterated and tritiated isotopomers: evidence for a hydride/dihydrogen structure

Hydrogenolysis of [Cp(PMe(3))Rh(Me)(CH(2)Cl(2))](+)BAr'(4)(-) (4, Ar' = 3,5-C(6)H(3)(CF(3))(2)) in dichloromethane afforded the nonclassical polyhydride complex [Cp*PMe(3))Rh(H)(H(2))](+)BAr'(4)(-) (1), which exhibits a single hydride resonance at all accessible temperatures in the (1)H NMR spectrum. Exposure of solutions of 1 to D(2) or T(2) gas resulted in partial isotopic substitution in the hydride sites. Formulation of 1 as a hydride/dihydrogen complex was based upon T(1) (T(1)(min) = 23 ms at 150 K, 500 MHz), J(H-D) (ca. 10 Hz), and J(H-T) (ca. 70 Hz) measurements. The barrier (Delta G(++)) to exchange of hydride with dihydrogen sites was determined to be less than ca. 5 kcal/mol. Protonation of Cp(PMe(3))Rh(H)(2) (2) using H(OEt(2))(2)BAr'(4) resulted in binuclear species [(Cp(PMe(3))Rh(H))(2)(mu-H)](+)BAr'(4)(-) (3), which is formed in a reaction involving 1 as an intermediate. Complex 3 contains two terminal hydrides and one bridging hydride ligand which exchange with a barrier of 9.1 kcal/mol as observed by (1)H NMR spectroscopy. Additionally, the structures of 3 and 4, determined by X-ray diffraction, are reported.     

Mechanism of the reaction of the [W3S4H3(dmpe)3]+ cluster with acids: evidence for the acid-promoted substitution of coordinated hydrides and the effect of the attacking species on the kinetics of protonation of the metal-hydride bonds

The cluster [W(3)S(4)H(3)(dmpe)(3)](+) (1) (dmpe=1,2-bis(dimethylphosphino)ethane) reacts with HX (X=Cl, Br) to form the corresponding [W(3)S(4)X(3)(dmpe)(3)](+) (2) complexes, but no reaction is observed when 1 is treated with an excess of halide salts. Kinetic studies indicate that the hydride 1 reacts with HX in MeCN and MeCN-H(2)O mixtures to form 2 in three kinetically distinguishable steps. In the initial step, the W-H bonds are attacked by the acid to form an unstable dihydrogen species that releases H(2) and yields a coordinatively unsaturated intermediate. This intermediate adds a solvent molecule (second step) and then replaces the coordinated solvent with X(-) (third step). The kinetic results show that the first step is faster with HCl than with solvated H(+). This indicates that the rate of protonation of this metal hydride is determined not only by reorganization of the electron density at the M-H bonds but also by breakage of the H-X or H(+)-solvent bonds. It also indicates that the latter process can be more important in determining the rate of protonation.