Pt- (and Co-) Promoted Molybdena-Alumina Catalysts: Analysis of the Impregnation Steps

The equilibrium parameters for the adsorption of Mo(VI) on gamma-Al(2)O(3) and of Co(II) and Pt(IV) on MoO(3)/gamma-Al(2)O(3) were determined. The adsorption isotherms were performed from aqueous solutions of the corresponding precursors on two different alumina supports. According to the classification given by Giles, L-type-shaped, subgroup 2, adsorption curves were found for the system Mo on gamma-Al(2)O(3), L-type, subgroup 1, for the Pt on MoO(3)/gamma-Al(2)O(3), and S-type for Co on the MoO(3)/gamma-Al(2)O(3) system. Numerical calculations were carried out for all the isotherms to find the equilibrium parameters. These constants are being used to model the development of Pt, Co, and Mo profiles on MoO(3)/gamma-Al(2)O(3) or gamma-Al(2)O(3) extrudates, respectively, which belong to the new generation of noble-metal-MoO(3)/gamma-Al(2)O(3)-supported catalysts to be used in oil-refining processes. Copyright 2001 Academic Press.     

Hydrogen chemical ionization mass spectrometry of metalloporphyrins

The hydrogen chemical ionization (H₂ CI) mass spectra of a range of metal(II) (Ni, Cu, Co, Pt), metal (III) (Al, Mn, Ga, Fe (bearing a single axial ligand)) and metal(IV) (Si, Ge, Sn (bearing two axial ligands) and V (as V?O²⁺)) porphyrins have been determined, The spectra are highly dependent on the coordinated metal, rather than the axial ligand(s) (where present). Ni(II), Cu(II), Mn(II or III), Ga(III), Ge(IV), Fe(III) and Sn(IV) porphyrins fragment via hydrogenation and demetallation, followed by cleavage of the resulting porphyrinogens at the meso(bridge) positions to give mono- and di-pyrrolic fragments. Tripyrrolic fragments are also observed in the case of Ni(II), Cu(II) and Sn(IV). Fragmentations of this type are similar to those observed for free-base porphyrins. In the case of Pt(II), Co(II), Al(III), Si(IV) and V(IV) (as vanadyl), the dipyrrolic fragment ions are either very weak or completely absent; hence their H₂CI spectra contain limited structural information. This variable CI behaviour may be related to the relative stabilities of the metalloporphyrins together with the multiple stable valency states exhibited by several metals.     

Influence of tin(II) chloride on the solvent extraction of platinum group metals with N,N-di-n-hexyl-N'-benzoylthiourea

Summary The solvent extraction of Rh(III) and Pt(IV) with N,N-di-n-hexyl-N'-benzoylthiourea (DHBT)/toluene is substantially accelerated in the presence of tin(II) chloride. Low concentrations of SnCl₂ from 0.02 to 0.03 mol/l and metal/ligand ratio of 1:4 (Pt) resp. 1:9 (Rh) lead to low residual metal concentrations below the detection limit of GFAAS. The extraction behaviour of Pt(II), Ru(III) and Ir(III) is not affected by the treatment with SnCl₂.     

Enhanced activity of gold-supported cobalt oxide for the electrochemical evolution of oxygen

Scanning electron microscopy, linear sweep voltammetry, chronoamperometry, and in situ surface-enhanced Raman spectroscopy were used to investigate the electrochemical oxygen evolution reaction (OER) occurring on cobalt oxide films deposited on Au and other metal substrates. All experiments were carried out in 0.1 M KOH. A remarkable finding is that the turnover frequency for the OER exhibited by ～0.4 ML of cobalt oxide deposited on Au is 40 times higher than that of bulk cobalt oxide. The activity of small amounts of cobalt oxide deposited on Pt, Pd, Cu, and Co decreased monotonically in the order Au > Pt > Pd > Cu > Co, paralleling the decreasing electronegativity of the substrate metal. Another notable finding is that the OER turnover frequency for ～0.4 ML of cobalt oxide deposited on Au is nearly three times higher than that for bulk Ir. Raman spectroscopy revealed that the as-deposited cobalt oxide is present as Co(3)O(4) but undergoes progressive oxidation to CoO(OH) with increasing anodic potential. The higher OER activity of cobalt oxide deposited on Au is attributed to an increase in fraction of the Co sites present as Co(IV) cations, a state of cobalt believed to be essential for OER to occur. A hypothesis for how Co(IV) cations contribute to OER is proposed and discussed.     

Electrocatalytic reduction of oxygen at electrodes coated with a bimetallic cobalt(II)/platinum(II) porphyrin

Edge plane pyrolytic graphite (EPG) electrodes coated with 5-(4-pyridyl)-10,15,20-tris(3-methoxy-4-hydroxyphenyl)porphyrin and its Pt(II) and Co(II)/Pt(II) analogs undergo an electrochemical-chemical-electrochemical (ECE) reaction when anodically scanned in 1.0 M HClO4. The new redox couple formed from this anodic conditioning of the coated electrode is dependent on the pH of the solution. Roughened EPG electrodes coated with the Co(II)/Pt(II) bimetallic porphyrin show a catalytic shift of 500 mV for the reduction of O2 when compared to the reduction of O2 at a bare EPG electrode. An additional catalytic shift of ca. 100 mV is observed for O2 reduction at an EPG electrode coated with the Co(II)/Pt(II) porphyrin which has been oxidized in 1.0 M HClO4. In addition to the added electrocatalysis a significant percentage of O2 reduced at the oxidized Co(II)/Pt(II) EPG electrode is converted to H2O as determined by rotating disk electrode measurements.     

Genesis of the active-component precursor in the synthesis of Pt/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts: III. Transformations of adsorbed platinum complexes during drying

The transformations of platinum(IV) complexes subsequent to their sorption on the support are considered. As the Pt(IV)/Al₂O₃ systems are dried at 25°C in daylight, their dehydration is accompanied by the replacement of inner sphere ligands of Pt(IV) by OH groups and the Coulombic bonding between the adsorbed metal complexes and the support turns into coordination bonding. Drying at a higher temperature of 120°C does not increase the extent of hydrolysis of the bound complexes in the predried samples. The observed increase in the proportion of unreadily reducible platinum species is likely due to the multisite adsorption of platinum complexes taking place.     

Catalytic methanation reaction over alumina supported cobalt oxide doped noble metal oxides for the purification of simulated natural gas

A series of alumina supported cobalt oxide based catalysts doped with noble metals such as ruthenium and platinum were prepared by wet impregnation method.The variables studied were difference ratio and calcination temperatures.Pt/Co(10∶90)/Al2O3 catalyst calcined at 700 ℃ was found to be the best catalyst which able to convert 70.10% of CO2 into methane with 47% of CH4 formation at maximum temperature studied of 400 ℃.X-ray diffraction analysis showed that this catalyst possessed the active site Co3O4 in face-centered cubic and PtO2 in the orthorhombic phase with Al2O3 existed in the cubic phase.According to the FESEM micrographs,both fresh and spent Pt/Co(10∶90)/Al2O3 catalysts displayed small particle size with undefined shape.Nitrogen Adsorption analysis showed that 5.50% reduction of the total surface area for the spent Pt/Co(10∶90)/Al2O3 catalyst.Meanwhile,Energy Dispersive X-ray analysis(EDX) indicated that Co and Pt were reduced by 0.74% and 0.14% respectively on the spent Pt/Co(10∶90)/Al2O3catalyst.Characterization using FT-IR and TGA-DTA analysis revealed the existence of residual nitrate and hydroxyl compounds on the Pt/Co(10∶90)/Al2O3 catalyst.     

Luminol-K2S2O8体系中金属离子化学发光行为的研究

报导了在自行设计的流动注射式化学发光分析仪上,对Luminal-K2S2O8体系中32种金属离子的化学发光行为的系统研究.确定了对金属离子的最优测定条件以及大多数金属离子的检出极限和线性范围.     

A rotating disc electrode study of oxygen reduction at platinised nickel and cobalt coatings

Platinized nickel and cobalt coatings, Pt(Ni) and Pt(Co), have been prepared on glassy carbon, GC, rotating disc electrode substrates by a two-step room temperature procedure that involved the electrodeposition of nickel and cobalt layers and their spontaneous partial replacement by platinum (“transmetalation”) when immersed into a chloroplatinic acid solution. By tuning the quantity of initially deposited nickel and cobalt, Pt(Ni) and Pt(Co) bimetallic coatings having a 26% atom Ni and 30% atom Co composition have been prepared. For both materials typical Pt surface electrochemistry was recorded during fast voltammetry in deaerated acid, pointing to the existence of a continuous Pt skin over a Pt–Ni and Pt–Co core. Oxygen reduction at the Pt(Ni)/GC and Pt(Co)/GC electrodes was studied by means of steady-state voltammetry at a rotating disc electrode and the construction of Tafel plots from corresponding voltammetric data. It was found that, when the initial potential of the voltammetric sweep allowed the formation of a complete Pt oxide monolayer, then oxygen reduction was hindered for low overpotentials at Pt(Ni) and Pt(Co), compared to pure bulk Pt. On the other hand, when the initial potential was less positive (thus leading to the formation of a fraction of surface oxide monolayer) the presence of Ni and Co enhanced the kinetics of oxygen reduction. The former behaviour is attributed to a decrease in oxide reduction ability of Pt in the presence of Ni and Co, while the latter to an increase in dissociative oxygen chemisorption due to Ni and Co.     

Deposition of platinum–ruthenium nano-particles on multi-walled carbon nano-tubes studied by gamma-irradiation

Pt/Ru deposited on multi-walled carbon nano-tubes (MWCNTs) was prepared with water/iso-propanol solutions containing Pt(IV) and Ru(III) ions by γ-irradiation. The water/iso-propanol ratio (v/v), additive amount of surfactant, the concentration ratio of Pt(IV)/Ru(III) ions and the total absorbed doses (kGy) were evaluated as synthesis parameters. The sample morphology was characterized by SEM and the Pt/Ru atomic ratio was obtained by EDX. It has been found that multi-walled carbon nano-tubes can be well distributed in the water/iso-propanol solution with additive of surfactant. Pt(IV) and Ru(III) ions can be reduced by both of hydrated electron and radical of iso-propanol produced from hydrogen abstraction reaction. The Pt/Ru atom ratio can be controlled by changing the ratio of Pt(IV)/Ru(III). Small nano-particles of Pt/Ru deposited on MWCNTs can be obtained for possible application of electro-catalysts in the proton exchange membrane fuel cells (PEMFC) under optimum conditions with absorbed doses, amount of surfactant, water/iso-propanol ratio and so on. The reduction of Pt(IV)/Ru(III) ions in the aqueous solution with additive of surfactant was also studied by use of pulse radiolysis and the mechanism involved in the reduction process has been proposed.     

Length-controllable catalyzing-synthesis and length-corresponding properties of FeCo/Pt nanorods

Newly designed magnetic-alloy/noble-metal FeCo/Pt nanorods have been first reported and fabricated through a length-controllable catalyzing-synthesis process in which the growth of FeCo nanorods was induced on Pt nanotips. The length of FeCo/Pt nanorods depends on the number of platinum nanotips. The proposed synthesis mechanism was corroborated by scanning electron microscopy, transition electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. With the decrease of Fe content in Fe(x)Co(96-x)/Pt(4) nanoalloys from 77 to 15, the morphology changes from nanorods with different lengths to nanoparticles. The analysis of the magnetic hysteresis loops indicated that the magnetic saturation and coercivity were strongly dependent on the length of the nanorods in which maximum saturation magnetization and minimum coercivity were obtained for Fe(77)Co(19)/Pt(4) nanorods with the length of ～2.5 μm. In particular, FeCo/Pt exhibited length-dependent reactivity towards 1,1,2,2-tetrachloroethane, and Fe(77)Co(19)/Pt(4) nanorods with the length of ～2.5 μm yielded the greatest dechlorination rate. Moreover, Pt can enhance the dechlorination of 1,1,2,2-tetrachloroethane.     

15N NMR coordination shifts in Pd(II), Pt(II), Au(III), Co(III), Rh(III), Ir(III), Pd(IV), and Pt(IV) complexes with pyridine, 2,2'-bipyridine, 1,10-phenanthroline, quinoline, isoquinoline, 2,2'-biquinoline, 2,2':6', 2'-terpyridine and their alkyl or aryl derivatives

The 15N NMR data for 105 complexes of Pd(II), Pt(II), Au(III), Co(III), Rh(III), Ir(III), Pd(IV), and Pt(IV) complexes with simple azines such as pyridine, 2,2'-bipyridine, 1,10-phenanthroline, quinoline, isoquinoline, 2,2'-biquinoline, 2,2':6', 2'-terpyridine and their alkyl or aryl derivatives have been reviewed. The 15N NMR coordination shifts, i.e. the differences between the 15N chemical shifts of the same nitrogen in the molecules of the complex and the ligand (Delta(15N) (coord) = delta(15N) (compl)--delta(15N) (lig)), have been related to some structural features of the reviewed coordination compounds, like the type of the central ion and the character of auxiliary ligands (mainly in trans position). These Delta(15N) (coord) parameters are negative, their absolute magnitudes (ca 30-150 ppm) generally increasing in the metal order Au(III) < Pd(II) < Pt(II) and Rh(III) < Co(III) < Pt(IV) < Ir(III), as well as with the enhanced trans influence of the other donor atoms (H, C < Cl < N).     

Block copolymer micellization induced microphase mass transfer: partition of Pd(II), Pt(IV) and Rh(III) in three-liquid-phase systems of S201-EOPO-Na2SO4-H2O

Three-liquid-phase partitioning of Pd(II), Pt(IV) and Rh(III) in systems of S201(diisoamyl sulfide)/nonane-EOPO(polyethylene oxide-polypropylene oxide random block copolymer)-Na(2)SO(4)-H(2)O was investigated. Experimental results indicated that the selective enrichment of Pd(II), Pt(IV) and Rh(III) respectively into the S201 organic top phase, EOPO-based middle phase and Na(2)SO(4) bottom phase was achieved by control over the phase behavior of the three-liquid-phase systems (TLPS). The microphase mass transfer behavior of Pt(IV), Pd(II) and Rh(III) was closely related to the micellization of EOPO molecules. A suggested micro-mechanism model and a mass transfer model describe the micellization of EOPO molecules and the effect on mass transfer of platinum ions across the microphase interfaces. The salting-out induced continuous dehydration and ordered arrangement of the hydrophilic PEO segments in amphiphilic EOPO micelle, and these are the main driving forces for mass transfer of platinum metal ions onto the exposed activity sites of the dehydrated PEO segments. The differences in microphase interfacial structure of EOPO micelles are crucial for the efficient separation between Pt(IV), Pd(II) and Rh(III).     

Liquid extraction of noble metal ions with bis(α-aminophosphonates)

Extraction of Au(III), Pt(IV), and Pd(II) ions from hydrochloric acid media with solutions of two bis(aminophosphonates), such as N,N-bis(dipentoxyphosphorylmethyl)octylamine and N,N′-bis[[(dioctyloxyphosphoryl)methyl]butylamine], in chloroform and xylene was investigated. Both these extractants proved to be highly effective for Au(III) ions in a wide acidity range, which allows these ions to be separated from other noble metal ions with a high degree of selectivity. At the same time, Pt(IV) and Pd(II) ions cannot be separated from one another with the extractants studied. The selectivity of their separation from Fe(III), Cu(II), Co(II), and Ni(II) metal ions is, too, not high. The reasons for these results lie in the specific structural features of the extractants, which predetermine the extraction mechanism.     

Pt(II)- and Pt(IV)-bridged cofacial diporphyrins via carbon-transition metal sigma-bonds

A directly Pt(IV)-bridged cofacial diporphyrin has been synthesized by the cyclometalation reaction of beta-pyridylporphyrin with a Pt(IV) salt. Upon treatment with methylhydrazine, the Pt(IV) bridge is reduced to the Pt(II) center, resulting in a Pt(II)-bridged cofacial dimer with a helicity inversion of the complex as well as change in electronic communication through the metal bridge.     

柴油深度脱芳烃Pd-Pt/USY催化剂的EXAFS研究

为满足日趋严格的环保要求和适应汽车工业的快速发展,柴油深度脱芳烃已成为国内外普遍关注的课题．近年来的研究表明,Pd－Pt/USY催化剂具有较高的芳烃加氢活性和较强的耐硫中毒能力[’－     

Adsorption behavior of metal ions onto a bovine serum albumin (BSA) membrane monitored by means of an electrode-separated piezoelectric quartz crystal.

The interaction between metal ions and bovine serum albumin (BSA) was studied by using a piezoelectric quartz crystal (PQC) arranged in the electrode-separated configuration. A silanized surface of the PQC was coated with a BSA membrane via a coupling reaction with glutaraldehyde. The frequency shifts obtained from PQC coated with a BSA membrane suggested that various kinds of metal ions could be adsorbed onto the BSA membrane from aqueous solutions containing a low concentration of metal ions (2 or 10 micromol dm(-3)), only when the BSA was denatured with an alkaline solution. Anionic species of Pt(IV) and Au(III) were adsorbed onto the denatured BSA membrane from an acetic acid solution at pH 2.2, and cationic species of Cd(II), Zn(II), Co(II), Ni(II), Cu(II), and Ag(I), and cations, such as Ca2+, Ba2+, and Mg2+, were adsorbed from ammonia buffer at pH 9.5, whereas Al(III), Cr(III), Fe(III), Hg(II), and Pb(II) were hardly adsorbed. The adsorption mechanisms of these metal ions are discussed, based on the electrostatic interaction between the metal ions and the denatured BSA membrane, and complex formation between the metal ions and amino acid residues of the denatured BSA. Further, the PQC coated with a denatured BSA membrane was applied to the determination of Pt and Cd, using large frequency shifts for Pt(IV) and Cd(II).     

Activation of carbon-hydrogen bonds via 1,2-addition across M-X (X = OH or NH(2)) bonds of d(6) transition metals as a potential key step in hydrocarbon functionalization: a computational study

Recent reports of 1,2-addition of C-H bonds across Ru-X (X = amido, hydroxo) bonds of TpRu(PMe3)X fragments {Tp = hydridotris(pyrazolyl)borate} suggest opportunities for the development of new catalytic cycles for hydrocarbon functionalization. In order to enhance understanding of these transformations, computational examinations of the efficacy of model d6 transition metal complexes of the form [(Tab)M(PH3)2X]q (Tab = tris-azo-borate; X = OH, NH2; q = -1 to +2; M = TcI, Re(I), Ru(II), Co(III), Ir(III), Ni(IV), Pt(IV)) for the activation of benzene C-H bonds, as well as the potential for their incorporation into catalytic functionalization cycles, are presented. For the benzene C-H activation reaction steps, kite-shaped transition states were located and found to have relatively little metal-hydrogen interaction. The C-H activation process is best described as a metal-mediated proton transfer in which the metal center and ligand X function as an activating electrophile and intramolecular base, respectively. While the metal plays a primary role in controlling the kinetics and thermodynamics of the reaction coordinate for C-H activation/functionalization, the ligand X also influences the energetics. On the basis of three thermodynamic criteria characterizing salient energetic aspects of the proposed catalytic cycle and the detailed computational studies reported herein, late transition metal complexes (e.g., Pt, Co, etc.) in the d6 electron configuration {especially the TabCo(PH3)2(OH)+ complex and related Co(III) systems} are predicted to be the most promising for further catalyst investigation.     

Influence of the Degree of Chitosan Sulfoethylation on the Sorption of Palladium(II) Chloride Complexes from Multicomponent Solutions

The influence exerted by the degree of substitution of sulfoethylated chitosan cross-linked with glutaraldehyde on the sorption of Pd(II) chloride complexes from multicomponent solutions containing Pt(IV), Cu(II), Ni(II), Co(II), Cd(II), and Zn(II) was studied. The sorption of transition metal ions under the conditions of the experiment at pH 0.5–5.0 is virtually fully suppressed. The strongest interfering effect on the Pd(II) sorption is exerted by Pt(IV). Calculation of the selectivity coefficients K_Pd/Pt shows that the selectivity of the Pd(II) sorption relative to Pt(IV) increases with an increase in the degree of substitution of chitosan from 0.3 to 0.5. Integral kinetic curves of the Pd(II) sorption were obtained, and the dependences were subjected to mathematical processing using the models of diffusion and chemical kinetics. The equilibrium in the palladium(II) chloride solution–sorbent system is attained within 40 min. Pd and Pt are quantitatively desorbed from the sorbent surface under dynamic conditions with 3.5 M HCl solution.     

Synthesis of Functional Resins Containing Heterocyclic Rings and Their Sorption Properties for Noble-Metal Ions

Five kinds of functional resins, 2-aminopyridine resin (2-APR), 3-APR, 4-APR, 2-hydroxypyridine resin (2-HPR), and 2-thiolbenzothiazole resin (2-TBTR), were synthesized. The functional group capacities of the resins were 3.0–4.2 mmol/g resin. The sorption capacities of 4-APR, 3-APR, and 2-APR for Au(III) and Pt(IV) were 3.12–3.22 mmol Au(III)/g APR and 1.27–1.60 mmol Pt(IV)/g APR. The molar complex ratios, Au(III)/NH-C₅H₄N and Pt(IV)/NH-Cs H₄N were 0.84–0.97 and 0.34–0.48, respectively. Selective sorption of 4-APR for various coexistent metal ions over a wide acidity range (1–5 N HCl) was in the following order: Pt(IV) > Au(III) > Cd²⁺ > Zn²⁺ > Pd(II) > Mn²⁺, Cu²⁺, Fe³⁺. The Au(III) adsorbed on APR can be quantitatively eluted with 2% aqueous thiourea. The regenerated APR can be reused without apparent decrease in the sorption capacity for Au(III). The separation of Au(III) and Cu²⁺ was studied preliminarily. The excellent properties show that APR may be used in the gold industry. The sorption capacities of 2-HPR for Au(III) is 0.99 mmol Au(III)/g 2-HPR. That of 2-TBTR for Au(III) is less than that of APR. 2-HPR is stable below 100°C, while 4-APR and 2-APR are stable below 80°C in air.