Surfactant-induced forces between carbon nanotubes

Dissipative particle dynamics simulations are employed to study surfactant-mediated forces between a pair of perpendicular carbon nanotubes (CNTs) coated by surfactants which form spherical micelles in bulk solution and on the tubes. Two force regimes are observed: at small tube/tube distances the force is attractive, whereas it is repulsive at larger distances. The attractive regime is dominated by a central micelle binding the tubes, while in the repulsive regime the contact region is depleted. The two regimes are separated by a discontinuous transition. The repulsive regime is critical for stabilizing CNT suspensions. Viewing rebundling as a thermally activated process, a connection between the repulsive force and the rebundling rate is established. We find that a larger hydrophilic surfactant headgroup creates a stronger and longer ranged tube/tube force, which reduces the rebundling rate significantly. The longer range originates directly from the further reaching head corona of the adsorbed surfactant layer. The larger magnitude of the force appears to be related to the axial compression force the adsorbed phase can sustain. This compression force appears to be the most critical factor for suspension design.     

Patterned colloid assembly by grafted photochromic polymer layers

Quartz surfaces and colloidal silica particles were derivatized with a poly(methyl methacrylate) copolymer containing spirobenzopyran (SP) photochromic molecules in the pendant groups at a concentration of 20 mol %. Two-photon near-IR excitation (approximately 780 nm) was then used to create chemically distinct patterns on the modified surfaces through a photochromic process of SP transformation to the zwitterionic merocyanine (MC) isomer. The derivatized colloids were approximately 10 times more likely to adsorb onto the photoswitched, MC regions. Surface coverage and adsorption kinetics have been compared to the mean-field model of irreversible monolayer adsorption.     

Coating carbon nanotubes with polymer in supercritical carbon dioxide

A facile and efficient method has been developed for coating MWNTs with solvent resistant polymer in scCO2, which permits the selective deposition of high molecular weight fluorinated graft poly(methyl vinyl ether-alt-maleic anhydride) polymer onto MWNTs in scCO2 under 100-170 bar at 40 degrees C and forms quasi one-dimensional nanostructures with conducting cores and insulating surfaces.     

High resolution capillary electrophoresis of carbon nanotubes

Purification of single-walled carbon nanotubes by capillary electrophoresis (CE) is demonstrated. Real-time Raman spectroscopy of the separation process and single-wavelength UV/vis detection show the ability of CE to provide high-resolution separations of nanotube fractions with baseline separation. AFM images of collected fractions demonstrate that separations are based on tube length. The separation method is suggested to be based on alignment of the nanotubes along the separation field.     

Incorporation of carbon nanotubes in porous polymer monolithic capillary columns to enhance the chromatographic separation of small molecules

Multiwalled carbon nanotubes have been entrapped in monolithic poly(glycidyl methacrylate-co-ethylene dimethacrylate) capillary columns to afford stationary phases with enhanced liquid chromatographic performance for small molecules in the reversed phase. While the column with no nanotubes exhibited an efficiency of only 1800 plates/m, addition of a small amount of nanotubes to the polymerization mixture increased the efficiency to over 15,000 and 35,000 plates/m at flow rates of 1 and 0.15 μL/min, respectively. Alternatively, the native glycidyl methacrylate-based monolith was functionalized with ammonia and, then, shortened carbon nanotubes, bearing carboxyl functionalities, were attached to the pore surface through the aid of electrostatic interactions with the amine functionalities. Reducing the pore size of the monolith enhanced the column efficiency for the retained analyte, benzene, to 30,000 plates/m at a flow rate of 0.25 μL/min. Addition of tetrahydrofuran to the typical aqueous acetonitrile eluents improved the peak shape and increased the column efficiency to 44,000 plates/m calculated for the retained benzene peak.     

Electric-field-enhanced assembly of single-walled carbon nanotubes on a solid surface

We report a novel electric-field-enhanced chemical assembly approach for fabricating highly aligned SWNT arrays on a solid surface with remarkably improved efficiency and packing density, which is very important for the real applications of carbon nanotube arrays. With the enhancement of the electric field, the assembling kinetics of SWNTs is remarkably speeded up to effectively decrease the assembling time, and the packing density can even exceed the saturated density of conventional assembly method by four times within only half an hour. The molecular dynamics simulation results illustrated the alignment of SWNTs with their long axes along the electric flux in solution, leading to the increase of packing density and efficiency through overcoming the steric hindrance of the "giant" carbon nanotubes.     

Effects of carbon nanotubes on polymer physics

A single carbon nanotube has many similarities with an individual polymer chain including the fact that the end‐to‐end length of both are often about the same and the diameter of the chain is about the same (for single‐walled nanotubes) or only ～10 to 20 times larger (for multiwalled nanotubes). The combination of the solid surface and the similarity of the two materials means that polymer physics are altered in manners not seen with any other type of commonly used filler. The purpose of this review is to update a chapter that appears in a recent tome by Grady (2011) and describe how polymer physics is altered in composites that contain carbon nanotubes. Subjects that will be discussed include chain configuration, glass transition, polymer diffusion, unit cells and crystalline superstructure (lamellae, spherulites and shish‐kebabs), and crystallization kinetics. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Synthesis of polymer grafted carbon nanotubes by nitroxide mediated radical polymerization in the presence of spin-labeled carbon nanotubes

Multiwalled carbon nanotubes (MWCNT) were grafted with polystyrene by in situ nitroxide mediated radical polymerization in the presence of TEMPO (2,2,6,6-tetramethylpiperidinyl-1-oxyl) functionalized MWCNT, which was synthesized by the reaction between 4-hydroxyl-TEMPO (HO-TEMPO) and carbonyl chloride groups on the MWCNT. Although the controllability of the polymerization was not high, highly soluble grafted MWCNTs were indeed obtained, indicating that the graft polymerization was efficient. The resulting polystyrene grafted MWCNTs were easily defunctionalized at room temperature using 3-chloroperoxybenzioc acid. TEM, SEM, and TGA were employed to determine the structure, morphology, and the grafting quantities of the resulting products.     

Surfactant-coated single-walled carbon nanotubes as a novel pseudostationary phase in capillary EKC

The analytical potential of the use of surfactant-coated single-walled carbon nanotubes (SC-SWNTs) as pseudostationary phase in CE is described. The pseudostationary phase shows an efficient alternative in enhancing electrochromatographic resolution of compounds which are capable of interacting with a nanotube surface, such as aromatic compounds. In general, the resolution is enhanced by increasing nanotube concentration in the buffer but the maximum amount of SWNTs that can be added to background electrolyte was found limited by compatibility with the UV/visible detection. As an alternative, a low-extension partial filling was used, consisting of the introduction into the capillary of concentrated SC-SWNT, just before the sample, with a plug length similar to the sample one. This has been showed as a reliable procedure in increasing resolution and sensitivity by sweeping phenomena. Finally, the potential of SC-SWNTs to perform chiral separations is discussed.     

Lateral capillary forces between solid bodies on liquid surface: a lattice Boltzmann study

When two solid bodies are placed on the surface of a dense liquid under gravitation, they deform the liquid surface to experience a lateral capillary force between themselves that can be attractive and repulsive, depending on the wettabilities and weights of the bodies. In the present study, the lateral capillary force between two square bodies at a liquid-vapor interface has been examined using numerical simulations based on a two-dimensional two-phase lattice Boltzmann (LB) method. The particular situations were simulated, where every body was vertically constrained and had the fixed triple points at its upper or lower corners. Here, the triple point indicates the place at which vapor, liquid, and solid phases meet. The interaction force between these two bodies was calculated as a function of the separation distance, the interfacial tension, and the gravitational acceleration. The simulation results agree well with the analytical expression of the lateral capillary interaction, indicating that our LB method can reproduce the interaction force between two bodies of various wettabilities at a liquid-vapor interface in mechanical equilibrium.     

Using carbon nanotubes to detect polymer transitions

Raman spectral shifts of single‐wall carbon nanotubes embedded in polymer systems were used to measure transitions in polymers. Glass‐transition temperatures and secondary transitions were observed, and Raman spectroscopic data were compared with dynamic mechanical tests for a thermosetting and a thermoplastic polymer. The data confirm that the Raman spectral response of carbon nanotubes embedded in polymers is sensitive to polymer transitions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1492–1495, 2001     

Segregated network polymer/carbon nanotubes composites

In this work we present the preparation of conductive polyethylene/carbon nanotube composites based on the segregated network concept. Attention has been focused on the effect of decreasing the amount of filler necessary to achieve low resistivity. Using high- and low-grade single-walled carbon nanotube materials we obtained conductive composites with a low percolation threshold of 0.5 wt.% for high-grade nanotubes, about 1 wt% for commercial nanotubes and 1.5 wt% for low-grade material. The higher percolation threshold for low-grade material is related to low effectiveness of other carbon fractions in the network formation. The electrical conductivity was measured as a function of the single-walled carbon nanotubes content in the polymer matrix and as a function of temperature. It was also found that processing parameters significantly influenced the electrical conductivity of the composites. Raman spectroscopy was applied to study single wall nanotubes in the conductive composites.     

Separation of carbon nanotubes in aqueous medium by capillary electrophoresis

A robust and reproducible method for the dispersion of carbon nanotubes, either single-walled or multi-walled is presented. Dispersion of nanotubes was achieved as surfactant-coated species of sodium dodecyl sulphate. The addition of small amounts of hydroxypropyl methyl cellulose (HPMC) together with the surfactant, sodium dodecyl sulphate, was found critical to achieve reproducible nanotubes dispersion and to obtain an homogeneous and stable solution. This solution is further analyzed by capillary electrophoresis using a background electrolyte solution containing a polymer, 0.025% (w/v) HPMC solution prepared in 5 mM ammonium acetate at pH 8.03. This electrophoretic method presents a high reproducibility between runs, being an interesting alternative to study nanotube size distribution or characterization after synthesis. In addition, the methodology developed allowed the study of the interaction of the different types of carbon nanotubes with a molecular probe such as pentachlorophenol. This procedure was showed effective to detect small differences on the chemical/physical surface properties of the nanotubes. The different interaction behavior found within the two SWNTs selected was critically discussed.     

Proton-fueled DNA-duplex-based stimuli-responsive reversible assembly of single-walled carbon nanotubes

Single-walled carbon nanotubes (SWNTs) have received much attention in nanotechnology because of their potential applications in molecular electronics, field-emission devices, biomedical engineering, and biosensors. Carbon nanotubes as gene and drug delivery vectors or as "building blocks" in nano-/microelectronic devices has been successfully explored. However, since SWNTs lack chemical recognition, SWNT-based electronic devices and sensors are strictly related to the development of a bottom-up self-assembly technique. Here we present an example of using DNA duplex-based protons (H(+)) as a fuel to control reversible assembly of SWNTs without generation of waste duplex products that poison DNA-based systems.     

Wrapping of single-walled carbon nanotubes by a pi-conjugated polymer: the role of polymer conformation-controlled size selectivity

Wrapping of a single-walled carbon nanotube (SWNT) was examined by using a poly[( m-phenylenevinylene)- alt-( p-phenylenevinylene)] (PmPV) derivative. The polymer's intrinsic ability in forming a helical conformation was found to play an essential role in the separation of nanotubes. Among about 15 tubes present in the pure SWNT (HiPcoTM) sample, the polymer was found to selectively pick up the tubes (11,6), (11,7) and (12,6), which correspond to tube diameters of 1.19, 1.25 and 1.24 nm, respectively. The SWNTs of smaller diameters were held loosely by the PmPV, and were gradually dropped out under centrifugation. The suspension solution prepared from the SWNT and PmPV was not permanently stable, with precipitation occurring after a few weeks. Irradiation in the UV-vis region exhibited a catalytic effect to shorten the precipitation time to hours. Those tubes, which were held loosely by PmPV, were quickly separated from the suspension during the irradiation process.     

Ultrafast dynamics of single-walled carbon nanotubes dispersed in polymer films

Wavelength-resolved femtosecond transient absorption spectroscopy is used to follow the electronic dynamics of single-walled carbon nanotubes in polymers following visible photoexcitation. Electron-hole (e-h) pairs give rise to sharp features in the transient spectra that decay in amplitude and exhibit rapid spectral shifts. The decay reflects (e-h) recombination on both short (1.3 ps) and long (35 ps) time scales. Transient spectra also exhibit a broad photobleach at early times that arises from the cooling of a hot electron gas created via excitation at the red edge of a pi-plasmon band.     

A simple method for controllable preparation of polymer nanotubes via a single capillary electrospinning

Polymer nanotubes have been successfully electrospun via a single capillary spinneret instead of coaxial electrospinning. By altering the volume of ethanol under a fixed amount of poly(vinyl pyrrolidone) (PVP) and tetraethyl orthosilicate (TEOS) in the precursor, the nanotubes could be controllably produced for a proper concentration of PVP solution. Further investigation showed that the diameters of nanotubes, the thicknesses of nanotube walls, and the ratios of the thickness of the nanotube wall to the nanotube diameter (RTNWND) could be controlled by altering the amount of TEOS in the precursor. With increasing the ratios of TEOS to PVP solution, the nanotube diameters were increased and the nanotube walls were decreased. Thus, the RTNWND were decreased. The applied voltages also have an effect on the nanotube diameter and the thickness of the nanotube wall, but little on the RTNWND. The effects of ethanol and TEOS on evaporation and phase separation processes were discussed.