配位键驱动的多卟啉阵列结构在纳米SiO2表面的组装及光电性能

制备了吡啶功能化的纳米二氧化硅(nanoSiO₂BPy), 并利用配位键驱动的层层自组装技术, 以四吡啶基锌卟啉(ZnTPyP)为链接单元, 在nanoSiO₂BPy表面构筑了含有(Pd/ZnTPyP)_n多卟啉阵列结构的有机-无机杂化材料. 利用热重、 紫外-可见吸收光谱和X射线光电子能谱跟踪分析了nanoSiO₂BPy@(Pd/ZnTPyP)_n杂化材料的组装过程. 结果表明, nanoSiO₂BPy@(Pd/ZnTPyP)₃杂化材料在150~450 ℃升温区间内质量损失17%, 可归结为组装在纳米SiO₂表面的多卟啉阵列和少量有机物的热分解. 紫外-可见和荧光光谱表明, 在nanoSiO₂BPy@(Pd/ZnTPyP)_n杂化材料中, 锌卟啉Soret带的吸收峰出现在426 nm处, 其Q带的荧光发射峰出现在605和655 nm处, 荧光寿命约为1.78 ns, 光谱数据均与锌卟啉在稀的二甲亚砜溶液中的结果接近, 表明组装在nanoSiO₂BPy表面的锌卟啉环之间相互作用较弱, 没有形成聚集体. 场发射透射电镜照片显示, 由于Pd/ZnTPyP的组装, nanoSiO₂BPy@(Pd/ZnTPyP)₃杂化材料的平均直径由原料的10~16 nm增加到15~20 nm. 杂化材料修饰电极的循环伏安曲线在-0.6~-2.4 V(vs. Ag/AgCl)范围内出现了2对不可逆的氧化还原峰, 归属于卟啉被氧化的电子转移过程. 探讨了nanoSiO₂BPy@(Pd/ZnTPyP)_n杂化材料作为光敏剂在光电转换、 光催化乙基紫精的还原和显色方面的应用.     

Sensitive determination of dopamine in the presence of uric acid and ascorbic acid using TiO2 nanotubes modified with Pd, Pt and Au nanoparticles

A simple modified TiO(2) nanotubes electrode was fabricated by electrodeposition of Pd, Pt and Au nanoparticles. The TiO(2) nanotubes electrode was prepared using the anodizing method, followed by modifying Pd nanoparticles onto the tubes surface, offering a uniform conductive surface for electrodeposition of Pt and Au. The performance of the modified electrode was characterized by cyclic voltammetry and differential pulse voltammetry methods. The Au/Pt/Pd/TiO(2) NTs modified electrode represented a high sensitivity towards individual detection of dopamine as well as simultaneous detection of dopamine and uric acid using 0.1 M phosphate buffer solution (pH 7.00) as the base solution. In both case, electro-oxidation peak currents of dopamine were linearly related to accumulated concentration over a wide concentration range of 5.0 × 10(-8) to 3.0 × 10(-5) M. However in the same range of dopamine concentration, the sensitivity had a significant loss at Pt/Pd/TiO(2) NTs electrode, suggesting the necessity for Au nanoparticles in modified electrode. The limit of the detection was determined as 3 × 10(-8) M for dopamine at signal-to-noise ratio equal to 3. Furthermore, the Au/Pt/Pd/TiO(2) NTs modified electrode was able to distinguish the oxidation response of dopamine, uric acid and ascorbic acid in mixture solution of different acidity. It was shown that the modified electrode possessed a very good reproducibility and long-term stability. The method was also successfully applied for determination of DA in human urine samples with satisfactory results.     

可控碳改性Pd/TiO2用于直接合成双氧水:非均相界面对催化性能的影响（英文）

双氧水(H2O2)是一种重要的绿色氧化剂,广泛应用于纺织、医疗、废水处理、军事等重要领域.目前, H2O2的工业生产以蒽醌法为主,该法设备投资大、运行成本高,同时工艺涉及大量的有机溶液,活性中间体蒽醌也会发生缓慢降解,产生有毒副产物.与蒽醌法相比,通过负载型贵金属催化剂催化H2与O2反应直接合成H2O2,过程绿色环保且生产工艺简单,引起了各界广泛关注.然而,从热力学上分析, H2和O2更容易反应生成H2O, H2O2只是该反应的中间产物,会继续发生加氢和直接分解反应生成H2O,导致H2和O2的低效利用,开发高H2O2选择性且高反应效率的催化剂已成为氢氧直接合成H2O2研究的重点与难点.目前大部分研究策略旨在通过调控或影响反应中心结构、价态来抑制H2O2的副反应,进而提升H2O2的选择性和反应效率;尽管已取得了良好的进展,但仍需发展新的调控策略来满足工业应用的要求.本课题组前期研究表明,促使H2O2从催化剂上脱附可以有效地提升H2O2的选择性和产率.相比于针对反应中心的调控,不稳定的H2O2从催化剂上快速脱附同样起到抑制H2O2参与副反应的作用.为此,本文提出一种炭量可控的非均一界面改性方法,以常规的Pd/TiO2作为研究对象,借助各种结构表征,发现炭物种在TiO2表面呈非均一分散状态,而且改性对于催化剂的几何结构影响较小;另外,催化剂表面的疏水性会随着碳含量的增加而增加,导致其与H2O2间的吸附能相应变小.反应结果显示,表面非均一的炭化改性技术可以显著提升Pd/TiO2催化剂的H2O2选择性和产率.通过构效关系分析,可知这种改性技术可以保持Pd颗粒与TiO2间相互作用的同时,还可以促进H2O2的快速脱附,进而提升改性Pd/TiO2催化剂的H2O2直接合成效率.该改性方法简单、易控,可拓展应用到其他类型催化剂的H2O2直接合成性能调控与改进.     

Pd纳米粒子敏化的纳米单层TiO_2-Ru(Ⅱ)螯合物修饰电极对单磷酸鸟苷的电催化氧化行为

利用LB膜技术可控制备了纳米单层的二氧化钛-有机钌螯合物杂化膜,并研究了上述无机-有机杂化膜修饰电极在Pd纳米粒子敏化后对单磷酸鸟苷(GMP)的电催化氧化行为.实验结果表明:(1)纳米单层TiO2/[Ru(phen)2(dC18bpy)]2+(简称为TiO2-Ru)杂化膜的平均厚度为(3.2±0.5)nm;(2)在光照条件下TiO2-Ru杂化膜能有效催化还原[Pd(NH3)4]2+形成粒径位于20～200nm之间的Pd纳米粒子;(3)纳米单层TiO2-Ru/Pd杂化膜能高效催化氧化具有供电子能力的单磷酸鸟苷(GMP),与纳米单层TiO2-Ru杂化膜修饰的ITO电极(ITO/TiO2-Ru)相比,当工作电压为1200mV时,ITO/TiO2-Ru/Pd电极在含有1×10-3molL-1GMP的磷酸盐缓冲液中,单位面积的催化氧化电流提高了约36倍;(4)Pd纳米粒子的引入消除了金属钌螯合物中配体对电子传递的阻碍作用,改变了电子传递途径,从而有效减少了电子空穴对的复合,提高了杂化膜修饰电极(ITO/TiO2-Ru/Pd)的电子传递效率.     

板式纳米碳纤维负载二氧化钛光催化复合材料的制备及降解甲基橙的研究

以板式纳米碳纤维为载体,采用酸性氧化法对载体进行预处理之后,使用钛酸异丙酯为钛源,高温水热法制备了二氧化钛/纳米碳纤维复合光催化剂,并考察了其对甲基橙的光催化去除能力及循环反应性能.复合材料中二氧化钛含量通过改变前驱体组成进行调节.材料的结构性能通过氮气吸附、X射线衍射(XRD)、能谱分析仪(EDS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、热重分析仪(TG-DSC)等测试技术进行了表征.结果表明,锐钛矿型的二氧化钛以纳米颗粒形式均匀分散在纳米碳纤维表面,从而形成了高度分散的二氧化钛/碳纤维纳米复合材料.另外,复合系统中中孔吸附作用的存在,与纳米二氧化钛的光催化产生协同作用,增强了复合材料在紫外光照射下对于水溶液中甲基橙的去除能力.在光照射下反应120 min时,不同担载量样品对甲基橙的去除率最高可达80.1%,不同煅烧温度样品最高可达79.2%.此外,光催化剂有着良好重复利用性能,3次循环反应后对甲基橙去除率仍可保持80.0%.     

Preparation of Au/TiO2 nanocomposites and their catalytic activity for DPPH radical scavenging reaction

Au/TiO2 nanocomposites have been prepared by UV photolysis or chemical reduction of a Au(III) complex formed on a spherical or a rodlike TiO2 support, and their catalytic activity for 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging reaction was investigated. The chemical reduction with dimethylamine borane (DMAB) provided smaller gold nanoparticles than those synthesized by UV photolysis. Type of the TiO2 also affected the size of gold particles; smaller gold particles were deposited on the spherical TiO2 support than on rodlike one. For the radical scavenging reaction, the Au/TiO2 nanocomposites prepared by chemical reduction exhibited a higher catalytic activity than those photochemically prepared, and rodlike TiO2 provided a higher activity than spherical one. The effects of preparation methods and type of TiO2 supports on the catalytic activity are discussed.     

TRMC, XPS, and EPR characterizations of polycrystalline TiO2 porphyrin impregnated powders and their catalytic activity for 4-nitrophenol photodegradation in aqueous suspension

Characterization of polycrystalline TiO(2) bare or porphyrin impregnated powders, used as photocatalysts for the degradation of 4-nitrophenol (4-NP) in aqueous suspension, was performed by time-resolved microwave conductivity (TRMC) measurements and electronic paramagnetic resonance (EPR) and X-ray photoelectron (XPS) spectroscopies. The presence of porphyrin sensitizers, as the metal-free or Cu [5,10,15,20-tetra (4-tert-butylphenyl)] porphyrin, impregnated onto the TiO(2) surface improved the photocatalytic activity of the bare TiO(2). TRMC measurements indicate that the number and lifetime of the photoinduced excess charge carriers increase in the presence of the macrocycles, and EPR and XPS spectroscopies support the mechanistic hypotheses based on the photoreactivity experiments.     

反相乳液中Ag/TiO2纳米杂化粒子的制备及其SERS效应

在反相乳液的微环境中用一步反应法制备了Ag/TiO2纳米杂化粒子,并用TEM,SPS,XPS及XRD等方法进行了表征.结果表明,Ag粒子(5-15nm)已镶嵌在TiO2(30-50nm)结构中,并且具有SERS活性.     

三维有序大孔二氧化钛表面超细钯纳米颗粒的构筑及其增强柴油炭烟催化燃烧性能（英文）

柴油机排放颗粒物(主要成分是炭烟)是城市大气PM2.5中一次颗粒物的主要来源和二次颗粒物形成的重要组分,严重危害大气环境和人类健康.利用颗粒物捕集器与催化剂相结合的连续过滤再生技术是满足柴油车国VI炭烟颗粒物排放标准的最有效技术,目前该技术所面临的挑战是研发在排气温度的柴油炭烟颗粒物催化氧化催化剂.柴油炭烟催化燃烧反应的本质是典型的气(氧气)-固(炭烟颗粒)-固(催化剂)三相深度氧化反应,因此我们研究组提出了高活性柴油炭烟燃烧催化剂设计应该遵循优化固-固接触与强化活化分子氧能力二者相结合的研究思路.为满足此设计思路的要求,本课题组前期采用孔径大于200 nm的三维有序大孔(3DOM)结构氧化物作为载体,利用大孔效应来实现PM在催化剂内部的有效扩散,从而提高催化剂与PM的接触效率.采用具有强活化分子氧能力的负载型贵金属(Au,Pt)纳米颗粒或贵金属-氧化物复合纳米颗粒作为活性位来提高催化剂对分子氧的活化能力,进而设计了多个系列高活性催化剂,并形成了担载贵金属纳米颗粒的可控制备方法与装置.然而,Au和Pt昂贵的价格限制了其广泛应用.价格相对便宜的Pd具有与Pt相似的催化性能,是其良好替代品.但是,目前关于3DOM氧化物表面负载型Pd纳米颗粒结构和尺寸与柴油炭烟催化燃烧性能之间的相关研究仍然较少.基于此,本文采用气泡辅助膜还原法制备了3DOM二氧化钛(TiO_2)担载超细Pd纳米颗粒催化剂.利用XRD,Raman,BET,SEM,TEM,ICP,XPS和H2-TPR等技术手段对催化剂进行表征,并以模拟柴油炭烟为研究对象,利用程序升温氧化反应(TPO)对催化剂的活性进行评价,深入探讨了催化剂的制备、结构及物化性质与炭烟催化燃烧反应性能之间的关系.XRD和Raman结果表明,TiO_2载体由锐钛矿(主)和金红石(次)两种物相组成.SEM照片显示,所制催化剂为规整的有序大孔结构,球形孔互相贯通,孔径均一,大孔腔平均尺寸为280 nm,孔窗尺寸为109 nm,这种三维有序大孔TiO_2的结构能够增强炭烟颗粒与催化剂之间的接触效率.TEM表征显示,平均粒径为1.1 nm的超细半球型Pd纳米颗粒高度分散于TiO_2载体的内壁上,两者间的优化界面面积有利于增加活化O2的活性位密度,这些活性位源于Pd与TiO_2间强相互作用.H2-TPR和XPS表征印证了上述观点,具有1.1 nm超细Pd颗粒的Pd/3DOM-TiO_2催化剂表现出强的低温氧化还原特性和丰富的表面吸附氧物种.在TPO测试中,相对于担载5.0 nm Pd颗粒的催化剂,具有1.1 nm尺寸超细Pd颗粒的Pd/3DOM-TiO_2催化剂展示了高的催化炭烟燃烧活性,T10,T50和T90分别为295,370和415 oC,且在5次TPO测试过程中表现出良好的催化和结构稳定性.这种具有3DOM结构和超细Pd纳米颗粒的纳米催化剂能够有效降低Pd的使用量,在催化炭烟燃烧的实际应用中大有潜力.     

Functionalization of self-organized TiO2 nanotubes with Pd nanoparticles for photocatalytic decomposition of dyes under solar light illumination

Self-organized, vertically oriented TiO2 nanotube arrays prepared by the sonoelectrochemical anodization method are functionalized with palladium (Pd) nanoparticles of approximately 10 nm size. A simple incipient wetness method is adopted to distribute the Pd nanoparticles uniformly throughout the TiO2 nanotubular surface. This functionalized material is found to be an excellent heterogeneous photocatalyst that can decompose nonbiodegradable azo dyes (e.g., methyl red and methyl orange) rapidly (150-270 min) and efficiently (100%) under ambient conditions using simulated solar light in the absence of any external oxidative radicals such as hydrogen peroxide.     

Facile fabrication of Ag-Pd bimetallic nanoparticles in ultrathin TiO(2)-gel films: nanoparticle morphology and catalytic activity

Ag-Pd bimetallic nanoparticles were prepared directly in ultrathin TiO(2)-gel films by a stepwise ion-exchange/reduction approach. Ion-exchange sites were created in ultrathin films using Mg(2+) ions as template. Ag(+) ion was then incorporated by ion exchange, and converted into metallic nanoparticles by low-temperature H(2) plasma, regenerating ion-exchange sites. The same procedure was then carried out for Pd(2+) ion, producing Pd-on-Ag bimetallic nanoparticles, as TEM observation and plasmon resonance absorption indicate. By contrast, reversed metal incorporation procedure appeared to give a mixture of individual Ag and Pd nanoparticles, as confirmed by TEM, absorption spectroscopy and X-ray photoelectron spectroscopy. For hydrogenation of methyl acrylate, the catalytic activity of the Pd-on-Ag nanoparticle is 367 times as large as that of commercial Pd black and 1.6 times as large as that of Pd monometallic nanoparticle. The outstanding catalytic activity was explicable by the large fraction of the surface-exposed Pd atoms. The formation process of the bimetallic nanoparticle and their general morphological feature are discussed.     

One-pot deposition of palladium on hybrid TiO2 nanoparticles and catalytic applications in hydrogenation

One-pot deposition of Pd onto TiO(2) has been achieved through directly contacting palladium(II) salt with nanosized functionalized TiO(2) support initially obtained by sol-gel process using titanium isopropoxide and citric acid. Citrate groups act as functional moieties able to directly reduce the Pd salt avoiding any further reducing treatment. Various palladium salts (Na(2)PdCl(4) and Pd(NH(3))(4)Cl(2)·H(2)O) and titanium to citrate (Ti/CA) ratios (20, 50, and 100) were used in order to study the effect of the nature of the precursor and of the citrate content on the final Pd particle size and catalytic properties of the as-obtained Pd/TiO(2) systems. Characterization was performed using N(2) adsorption-desorption isotherms, ICP-AES, FTIR, XRD, XPS, and TEM. The as-obtained hybrid Pd/TiO(2) catalysts were tested in the selective hydrogenation (HYD) of an α,β-unsaturated aldehyde, i.e. cinnamaldehyde. Citrate-free Pd/TiO(2)-based catalysts present lower selectivity into saturated alcohol. However, citrate-functionalized Pd/TiO(2) catalyst seems to control the selectivity, the particle size and dispersion of Pd NPs leading to high intrinsic activity.     

Porphyrin‐based polymer‐supported palladium as an excellent and recyclable catalyst for Suzuki–Miyaura coupling reaction in water

A porphyrin‐based polymer with high surface area was synthesized using 5,10,15,20‐tetraphenylporphyrin through a one‐pot Friedel–Crafts alkylation reaction. Pd(II) was successfully supported on this polymer. This strategy provides an easy approach to produce highly stable Pd–porphyrin‐based polymer. The resulting Pd catalyst was characterized using Fourier transform infrared and X‐ray photoelectron spectroscopies, thermogravimetric analysis, scanning and transmission electron microscopies and N₂ adsorption–desorption measurements. This porphyrin‐based polymer‐supported Pd was used as a heterogeneous catalyst for Suzuki–Miyaura coupling reaction in water. The results demonstrated that this Pd catalyst indeed exhibited excellent catalytic activity and recycling performance in water, even for inactive aryl chloride substrate. A new heterogeneous strategy for catalyzing the Suzuki–Miyaura reaction in water is provided.     

无表面活性剂条件下一锅法制备金属/氧化锌复合材料用于催化二氧化碳加氢制甲醇反应

Catalytic hydrogenation of CO₂ to methanol is an important chemical process owing to its contribution in alleviating the impacts of the greenhouse effect and in realizing the requirement for renewable energy sources. Owing to their excellent synergic functionalities and unique optoelectronic as well as catalytic properties, transition metal/ZnO (M/ZnO) nanocomposites have been widely used as catalysts for this reaction in recent years. Development of size-controlled synthesis of metal/oxide complexes is highly desirable. Further, because it is extremely difficult to achieve the strong-metal-support-interaction (SMSI) effect when the M/ZnO nanocomposites are prepared via physical methods, the use of chemical methods is more favorable for the fabrication of multi-component catalysts. However, because of the requirement for an extra H₂ reduction step to obtain the active metallic phase (M) and surfactants to control the size of nanoparticles, most M/ZnO nanocomposites undergo two- or multi-step synthesis, which is disadvantageous for the stable catalytic performance of the M/ZnO nanocomposites. In this work, we demonstrate facile one-pot synthesis of M/ZnO (M = Pd, Au, Ag, and Cu) nanocomposites in refluxed ethylene glycol as a solvent, without using any surfactants. During the synthesis process, Pd and ZnO species can stabilize each other from further aggregation by reducing their individual surface energies, thereby achieving size control of particles. Besides, NaHCO₃ serves as a size-control tool for Pd nanoparticles by adjusting the alkaline conditions. Ethylene glycol serves as a mild reducing agent and solvent owing to its capacity to reduce Pd ions to generate Pd crystals. The nucleation and growth of Pd particles are achieved by thermal reduction, while the ZnO nanocrystals are formed by thermal decomposition of Zn(OAc)₂. X-ray diffraction patterns of the M/ZnO and ZnO were analyzed to study the phase of the nanocomposites, and the results show that no impurity phase was detected. Transmission electron microscopy (TEM) was used to study the morphology and structural properties. In addition, X-ray photoelectron spectroscopy analysis was performed to further confirm the formation of M/ZnO hybrid materials, and the results confirm SMSI between Pd and ZnO. Inductively coupled plasma mass spectrometry was used to check the actual elemental compositions, and the results show that the detected atomic ratios of Pd/Zn were consistent with the values in the theoretical recipe. To investigate the effects of the Pd/Zn molar ratios and the added amount of NaHCO₃ on Pd size, the average sizes of Pd particles were calculated, and the results were confirmed by TEM observation. The Cu/ZnO/Al₂O₃ composite is a widely known catalyst for hydrogenation of CO₂ to methanol, and other M/ZnO composites are also catalytic for this reaction. Therefore, different M/ZnO hybrids were further studied as catalysts for hydrogenation of CO₂ to methanol, among which Pd/ZnO (1 : 9) demonstrated the best performance (30% CO₂ conversion, 69% methanol selectivity, and 421.9 g_methanol·(kg catalyst·h)^-1 at 240 ℃ and 5 MPa. The outstanding catalytic performance may be explained by the following two factors: first, Pd is a good catalyst for the dissociation of H₂ to give active H atoms, and second, SMSI between Pd and ZnO favors the formation of surface oxygen vacancies on ZnO. Moreover, most M/ZnO composites exhibit excellent performance in methanol selectivity, especially the Au/ZnO catalyst, which has the highest methanol selectivity (82%) despite having the lowest CO₂ conversion. Hopefully, this work would provide a simple route for synthesis of M/ZnO nanocomposites with clean surfaces for catalysis.     

Multiwalled carbon nanotubes drive the activity of metal@oxide core-shell catalysts in modular nanocomposites

Rational nanostructure manipulation has been used to prepare nanocomposites in which multiwalled carbon nanotubes (MWCNTs) were embedded inside mesoporous layers of oxides (TiO(2), ZrO(2), or CeO(2)), which in turn contained dispersed metal nanoparticles (Pd or Pt). We show that the MWCNTs induce the crystallization of the oxide layer at room temperature and that the mesoporous oxide shell allows the particles to be accessible for catalytic reactions. In contrast to samples prepared in the absence of MWCNTs, both the activity and the stability of core-shell catalysts is largely enhanced, resulting in nanocomposites with remarkable performance for the water-gas-shift reaction, photocatalytic reforming of methanol, and Suzuki coupling. The modular approach shown here demonstrates that high-performance catalytic materials can be obtained through the precise organization of nanoscale building blocks.     

Preparation of New Magnetic Nanocatalysts Based on TiO2 and ZnO and Their Application in Improved Photocatalytic Degradation of Dye Pollutant Under Visible Light

Photocatalytic degradation of methyl orange (MO) as a model of an organic pollution was accomplished with magnetic and porous TiO₂/ZnO/Fe₃O₄/PANI and ZnO/Fe₃O₄/PANI nanocomposites under visible light irradiation. The structures of nanocomposites were characterized by various techniques including UV–Vis absorption spectroscopy, XRD, SEM, EDS, BET and TGA. Optical absorption investigations show two λ_max at 450 and 590 nm for TiO₂/ZnO/Fe₃O₄/PANI nanocomposites respectively possessing optical band gaps about 2.75 and 2.1 eV smaller than that of the neat TiO₂ and ZnO nanoparticles. Due to these optical absorptions, the nanocomposites can be considered promising candidates as visible light photocatalysts to produce more electron‐hole pairs. The degradation of MO, extremely increased using polymeric photocatalysts and decolorization in the presence of visible light achieved up to 90% in less than 20 min in comparison with the neat nanoparticles (about 10%). All these advantages promise a bright future for these composites as useful photocatalysts. The degradation efficiency of MO using stable nanocomposites was still over 70% after ten times reusing. The highest decolorizing efficiencies were achieved with 0.75 g L^?1 of catalyst and 10 mg L^?1 of MO at natural pH under visible light irradiation in less than 20 min.     

The degradation mechanism of methyl orange under photo-catalysis of TiO2

The properties of photo-generated reactive species, holes and electrons in bulk TiO(2) (anatase) film and nano-sized TiO(2) were studied and their effects towards decomposing pollutant dye methyl orange (MO) were compared by transient absorption spectroscopies. The recombination of holes and electrons in nano-sized TiO(2) was found to be on the microsecond time scale consistent with previous reports in the literature. However, in bulk TiO(2) film, the holes and electrons were found to be on the order of picoseconds due to ultra fast free electrons. The time-correlated single-photon counting (TCSPC) technique combined with confocal fluorescence microscopy revealed that the fluorescence intensity of MO is at first enhanced noticeably by TiO(2) under UV excitation and soon afterwards weakened dramatically, with the lifetime prolonged. Photo-generated holes in nano-sized TiO(2) can directly oxidize MO on the time scale of nanoseconds, while free electrons photo-generated in bulk TiO(2) film can directly inject into MO on the order of picoseconds. Through cyclic voltammetry measurements, it was found that MO can be reduced at -0.28 V and oxidized at 1.4 V (vs. SCE) and this provides thermodynamic evidence for MO to be degraded by electrons and holes in TiO(2). Through comparison of the hole-scavenging effect of MO and water, it was found that in polluted water when MO is above 1.6 × 10(-4) M, the degradation is mainly due to a direct hole oxidation process, while below 1.6 × 10(-4) M, hydroxyl oxidation competes strongly and might exceed the hole oxidation.     

Pd/Ni异结构纳米催化剂的制备及其对甲酸氧化的电催化

通过两步还原法制备了Pd/Ni双金属催化剂.由于金属Pd原子在先行还原的Ni纳米粒子表面的外延生长以及其在Ni表面及Pd表面生长表现出的吉布斯自由能差异,最终导致了异结构Pd/Ni纳米粒子的形成.高分辨电子透射显微镜结果证实了异结构的存在,然而X射线衍射测量表明Pd/Ni纳米粒子具有类似于Pd的面心立方结构.制备的Pd/Ni纳米粒子与同等条件下合成的Pd纳米粒子相比对甲酸氧化呈现了更高的电催化活性,而且电催化稳定性也要明显优于纯Pd纳米粒子,证明Pd/Ni双金属催化剂是可选的直接甲酸燃料电池阳极催化剂.双金属催化剂对甲酸氧化电催化活性和稳定性增强可能是Ni原子的修饰改变了Pd粒子表面配位不饱和原子的电子结构所致.     

WC/TiO2纳米复合材料的制备及其电催化性能

以TiCl4为原料, 采用溶胶水解法合成了金红石型纳米TiO2颗粒, 并以其为载体制备了WC/TiO2纳米复合材料. 采用X射线衍射(XRD)、扫描电子显微镜(SEM)和X射线能谱(EDS)等手段分析了WC/TiO2纳米复合材料的晶相组成和表面形貌. 结果显示样品是由WC, TiO2和W组成, 纳米WC颗粒均匀地包覆在TiO2的表面, 并与TiO2构成了WC/TiO2纳米复合材料. 采用循环伏安法和计时电流法研究了WC/TiO2纳米复合材料对硝基苯的电催化性能. 结果表明, WC/TiO2纳米复合材料对硝基苯的电催化活性和电化学稳定性均优于介孔结构碳化钨(meso-WC)和纳米WC颗粒(part-WC).     

Synthesis of a hierarchical three-component nanocomposite structure system with enhanced electrocatalytic and photoelectrical properties

Effective control over the morphology and size of Pd/Pt nanoparticles is currently of immense interest because their electronic, optical, and catalytic properties are superior to pure platinum nanoparticles. However, control over the nanoparticle shape is still challenging. Therefore, a novel design and synthetic route needs to be developed to obtain a high-performance catalyst. Herein, a hierarchical three-component nanocomposite structure system (HTNSS) composed of graphene, TiO(2), and Pd@Pt core-shell nanoparticles was designed and synthesized by a sequential strategy that focuses on constructing the monolithic structure rather than limited single-component counterparts. The resulting composites were characterized by various techniques, which showed that the Pd@Pt core-shell nanoparticles were preferentially deposited on the peripheral interface of the graphene and TiO(2) nanoparticles. The photoelectrical and catalytic performances were obviously improved relative to the commercially available E-TEK Pt/C owing to their synergistic effect.