Photoredox catalyzed C(sp3)C(sp) coupling of dihydropyridines and alkynylbenziodoxolones

A visible light mediated deformylative alkynylation of aldehydes is presented. Under photo irradiation, 1,4-dihydropyridine (DHP), derived from an aldehyde, generated a C(sp³)- radical which couples with an alkynylbenziodoxolone to generate an alkyl substituted alkyne coupling product. This strategy is mild and easy to operate, a wide range of functional groups were tolerated, and 16 examples of products with 35–86% yields were obtained.     

Ligand‐Enabled Alkynylation of C(sp3)−H Bonds with Palladium(II) Catalysts

The palladium(II)‐catalyzed β‐ and γ‐alkynylation of amide C(sp³)−H bonds is enabled by pyridine‐based ligands. This alkynylation reaction is compatible with substrates containing α‐tertiary or α‐quaternary carbon centers. The β‐methylene C(sp³)−H bonds of various carbocyclic rings were also successfully alkynylated.     

Gold-Catalyzed C(sp2)−C(sp) Coupling by Alkynylation through Oxidative Addition of Bromoalkynes

A gold(I)-catalyzed cascade cyclization–alkynylation of allenoates using alkynyl bromide to generate β-alkynyl-γ-butenolides was investigated. Whereas alkynyl iodides afforded significant amounts of the homo-coupling of two lactone units, alkynyl bromides led to a selective reaction, and a broad functional group tolerance was observed. Under the optimized reaction conditions, it was possible to directly synthesize a large range of β-alkynyl-γ-butenolides in moderate to good yields without the need for any external oxidant.     

Palladium-catalyzed direct ethynylation of C(sp3)-H bonds in aliphatic carboxylic acid derivatives

The first catalytic alkynylation of unactivated C(sp(3))-H bonds has been accomplished. The method allows for the straightforward introduction of an ethynyl group into aliphatic acid derivatives under palladium catalysis. This new reaction can be applied to the rapid elaboration of complex aliphatic acids, for example, via azide/alkyne cycloaddition.     

Photo-induced copper-catalyzed alkynylation and amination of remote unactivated C(sp3)-H bonds

A method for remote radical C–H alkynylation and amination of diverse aliphatic alcohols has been developed. The reaction features a copper nucleophile complex formed in situ as a photocatalyst, which reduces the silicon-tethered aliphatic iodide to an alkyl radical to initiate 1,n-hydrogen atom transfer. Unactivated secondary and tertiary C–H bonds at β, γ, and δ positions can be functionalized in a predictable manner.

Remote C−H alkynylation and amination of aliphatic alcohols.     

Palladium-Catalyzed Decarboxylative Alkynylation of α-Acyloxyketones by C(sp3)−O Bond Cleavage

Palladium-catalyzed decarboxylative alkynylation of α-acyloxyketones triggered by C(sp³)−O bond cleavage is disclosed. The decarboxylation strategy featuring a neutral reaction condition enabled an unprecedent catalytic alkynylation of a ketone enolate. The reaction was applied to a variety of substrates, giving desired products in good yields. We successfully obtained X-ray crystallography of a new palladium–enolate intermediate that was synthesized by a reaction of [Pd(cod)(CH₂TMS)₂] with XPhos and α-acyloxyketone at room temperature, indicating facile C(sp³)−O bond disconnection.     

Gold‐Catalyzed C(sp3)H/C(sp)H Coupling/Cyclization/Oxidative Alkynylation Sequence: A Powerful Strategy for the Synthesis of 3‐Alkynyl Polysubstituted Furans

In sharp contrast to the gold‐catalyzed reactions of alkynes/allenes with nucleophiles, gold‐catalyzed oxidative cross‐couplings and especially C? H/C? H cross‐coupling have been under represented. By taking advantage of the unique redox property and carbophilic π acidity of gold, this work realizes the first gold‐catalyzed direct C(sp³)? H alkynylation of 1,3‐dicarbonyl compounds with terminal alkynes under mild reaction conditions, with subsequent cyclization and in situ oxidative alkynylation. A variety of terminal alkynes including aryl, heteroaryl, alkenyl, alkynyl, alkyl, and cyclopropyl alkynes all successfully participate in the domino reaction. The protocol offers a simple and region‐defined approach to 3‐alkynyl polysubstituted furans.     

Density functional computations of alkynylation of ethanimine catalyzed by chiral zinc(II)‐complexes

The alkynylation of ethanimine catalyzed by chiral zinc(II)‐complexes was studied by means of the density functional theory (DFT). All the intermediates and transition states were optimized completely at the B3LYP/6‐31G(d,p) level. Calculation results confirm that the alkynylation of ethanimine is exothermic and the total released energy is about ?13 kJ/mol. The formation of the catalyst–alkynyl complexes M4 is the rate‐determining step for this alkynylation, and the formation of the catalyst–amine complexes M5 is the chirality‐limiting step for this alkynylation. The transition states for the chirality‐limiting step have a H? O? Zn? C? C? N six‐membered ring. The dominant products predicted theoretically for this alkynylation are, respectively, S‐amine for ethanimine anti and R‐amine for ethanimine syn . © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2008     

Selective Carbonyl−C(sp3) Bond Cleavage To Construct Ynamides,Ynoates, and Ynones by Photoredox Catalysis

Carbon–carbon bond cleavage/functionalization is synthetically valuable, and selective carbonyl−C(sp³) bond cleavage/alkynylation presents a new perspective in constructing ynamides, ynoates, and ynones. Reported here is the first alkoxyl‐radical‐enabled carbonyl−C(sp³) bond cleavage/alkynylation reaction by photoredox catalysis. The use of novel cyclic iodine(III) reagents are essential for β‐carbonyl alkoxyl radical generation from β‐carbonyl alcohols, including alcohols with high redox potential ( >2.2 V vs. SCE in MeCN). β‐Amide, β‐ester, and β‐ketone alcohols yield ynamides, ynoates, and ynones, respectively, for the first time, with excellent regio‐ and chemoselectivity under mild reaction conditions.     

Iron(II)‐Catalyzed Site‐Selective Functionalization of Unactivated C(sp3)−H Bonds Guided by Alkoxyl Radicals

An alkoxyl radical guided strategy for site‐selective functionalization of unactivated methylene and methine C?H bonds enabled by an Fe^II‐catalyzed redox process is described. The mild, expeditious, and modular protocol allows efficient remote aliphatic fluorination, chlorination, amination, and alkynylation of structurally and electronically varied primary, secondary, and tertiary hydroperoxides with excellent functional‐group tolerance. The application for one‐pot 1,4‐hydroxyl functionalization of non‐oxygenated alkane substrates initiated by aerobic C?H oxygenation is also demonstrated.     

Selective Carbonyl−C(sp3) Bond Cleavage To Construct Ynamides,Ynoates, and Ynones by Photoredox Catalysis

Carbon–carbon bond cleavage/functionalization is synthetically valuable, and selective carbonyl−C(sp³) bond cleavage/alkynylation presents a new perspective in constructing ynamides, ynoates, and ynones. Reported here is the first alkoxyl‐radical‐enabled carbonyl−C(sp³) bond cleavage/alkynylation reaction by photoredox catalysis. The use of novel cyclic iodine(III) reagents are essential for β‐carbonyl alkoxyl radical generation from β‐carbonyl alcohols, including alcohols with high redox potential ( >2.2 V vs. SCE in MeCN). β‐Amide, β‐ester, and β‐ketone alcohols yield ynamides, ynoates, and ynones, respectively, for the first time, with excellent regio‐ and chemoselectivity under mild reaction conditions.     

Synthesis of C3-symmetric tris(beta-hydroxy amide) ligands and their Ti(IV) complex-catalyzed enantioselective alkynylation of aldehydes

[reaction: see text]. A series of new chiral C3-symmetric tris(beta-hydroxy amide) ligands have been synthesized via the reaction of 1,3,5-benzenetricarboxylic chloride and optically pure amino alcohols (up to 96% yield). The asymmetric catalytic alkynylation of aldehydes with these new C3-symmetric chiral tris(beta-hydroxy amide) ligands and Ti (O(i)'Pr)4 was investigated. Ligand 4c synthesized from (1R,2S)-(-)-2-amino-1,2-diphenylethanol is effective for the enantioselective alkynylation of various aldehydes, and high enantioselectivity was obtained with aromatic aldehydes and alpha,beta-unsaturated aldehyde (up to 92% ee).     

A Highly Efficient Gold‐Catalyzed Photoredox α‐C(sp3)H Alkynylation of Tertiary Aliphatic Amines with Sunlight

A new α‐C(sp³)? H alkynylation of unactivated tertiary aliphatic amines with 1‐iodoalkynes as radical alkynylating reagents in the presence of [Au₂(μ‐dppm)₂]²⁺ in sunlight provides propargylic amines. Based on mechanistic studies, a C? C coupling of an α‐aminoalkyl radical and an alkynyl radical is proposed for the C(sp³)? C(sp) bond formation. The mild, convenient, efficient, and highly selective C(sp³)? H alkynylation reaction shows excellent regioselectivity and good functional‐group compatibility. A scale‐up to gram quantities is possible with sunlight used as a clean and sustainable energy source.     

A single Cu(II) catalyst for the three-component coupling of diverse nitrogen sources with aldehydes and alkynes

A single Cu(II) catalyst without the addition of ligand or base couples a diverse range of nitrogen sources with alkynes and aldehydes bearing alkyl, halogenated, silyl, aryl, and heteroaryl groups. The first example of a copper-catalyzed alkynylation involving p-toluenesulfonamide provides high yields of N-Ts-protected propargylamines. The superior activity of copper(II) triflate also allows this three-component alkynylation to incorporate a ketone.     

"One-step" alkynylation of adamantyl iodide with silver(I) acetylides

[reaction: see text] Silver(I) acetylides allow one-step alkynylation of adamantyl iodide in yields ranging from 25 to 68%.     

Palladium(II)‐Catalyzed Site‐Selective C(sp3)−H Alkynylation of Oligopeptides: A Linchpin Approach for Oligopeptide–Drug Conjugation

The palladium(II)‐catalyzed C(sp³)−H alkynylation of oligopeptides was developed with tetrabutylammonium acetate as a key additive. Through molecular design, the acetylene motif served as a linchpin to introduce a broad range of carbonyl‐containing pharmacophores onto oligopeptides, thus providing a chemical tool for the synthesis and modification of novel oligopeptide–pharmacophore conjugates by C−H functionalization. Dipeptide conjugates with coprostanol and estradiol were synthesized by this method for potential application in targeted drug delivery to tumor cells with overexpressed nuclear hormone receptors.     

NHC–Copper(I) Halide‐Catalyzed Direct Alkynylation of Trifluoromethyl Ketones on Water

An efficient and easily scalable NHC–copper(I) halide‐catalyzed addition of terminal alkynes to 1,1,1‐trifluoromethyl ketones, carried out on water for the first time, is reported. A series of addition reactions were performed with as little as 0.1–2.0 mol % of [(NHC)CuX] (X=Cl, Br, I, OAc, OTf) complexes, providing tertiary propargylic trifluoromethyl alcohols in high yields and with excellent chemoselectivity from a broad range of aryl‐ and more challenging alkyl‐substituted trifluoromethyl ketones (TFMKs). DFT calculations were performed to rationalize the correlation between the yield of catalytic alkynylation and the sterics of N‐heterocyclic carbenes (NHCs), expressed as buried volume (%VBur), indicating that steric effects dominate the yield of the reaction. Additional DFT calculations shed some light on the differential reactivity of [(NHC)CuX] complexes in the alkynylation of TFMKs. The first enantioselective version of a direct alkynylation in the presence of C₁‐symmetric NHC–copper(I) complexes is also presented.     

Synthesis of (1E)-1-Chloroalk-1-en-4-ynes

Russian Journal of General Chemistry - A stereoselective method has been developed for the synthesis of (1E)-chloroalk-1-en-4-ynes, promising precursors to 1,4-enynes, on the basis of alkynylation...     

A highly stereoselective synthesis of the C10-C23 fragment of (-)-dictyostatin

A highly stereoselective synthesis of the C10-C23 fragment of (-)-dictyostatin has been achieved using a Carreira alkynylation and a Marshall-Tamaru allenylzinc addition as key steps.     

Catalytic enantioselective alkynylation of prochiral sp3 C-H bonds adjacent to a nitrogen atom

[reaction: see text] The construction of chiral carbon centers via the first catalytic asymmetric alkynylation of prochiral CH2 groups was developed by using a copper-catalyzed double activation of sp3 and sp C-H bonds. Optically active 1-alkynylated tetrahydroisoquinolines were obtained by this method.