Characterization of chemopreventive agents from the dichloromethane extract of Eurycorymbus cavaleriei by liquid chromatography–ion trap mass spectrometry

In the present study, we examined the potential chemopreventive activity of dichloromethane extract of Eurycorymbus cavaleriei by investigating the change of constitutions after incubation with glutathione (GSH). The major constitutions in the dichloromethane extract of E. cavaleriei were cumarin compounds and their cleavage pattern was examined by LC–MS-MS and the characteristic product ions at m/z 206 and 207 were helpful to determine the substitutions of coumarinolignoid compounds. The mechanism of conjugations of 5′-demethylaquillochin and its isomer with GSH was discussed and validated through analysis of the conjugations of reference compound 6-hydroxy-7-methoxycoumarin with GSH by LC–MS-MS and NMR spectrum. The relative ability to induce the detoxification enzyme, NAD(P)H:quinone oxidoreductase 1 (NQO1) of nine coumarin compounds was tested which also showed 5′-demethylaquillochin exhibited the most potential chemopreventive ability. These observations suggest that 5′-demethylaquillochin and its isomer from the dichloromethane extract of E. cavaleriei have potential as chemopreventive agents through induction of detoxification enzymes.     

Imaging Array SPR Biosensor Immunoassays for Sulfamethoxazole and Sulfamethazine

A homemade array surface plasmon resonance (SPR)-based imaging biosensor was used to develop sensitive and fast immunoassays to determine sulfamethoxazole (SMOZ) and sulfamethazine (SMT) in buffer. Two conjugations of sulfonamide-bovine serum albumin (BSA) were separately immobilized on two different rows of the array chip with one row as reference. The immobilization was carried out in the instrument to monitor the quantity of the conjugations immobilized. The antibody mixed with the sulfonamide in the buffer was injected over the surface of the chip to get a relative response which was inversely proportional to the concentration of the sulfonamide in the PBS buffer. Two calibration curves were constructed and the limit of detection for sufamethoxazole in buffer was 3.5 ng/mL and for sulfamethazine 0.6 ng/mL. The stability and specificity of the antibody were also studied. The monoclonal antibody did not bind with BSA.     

(Ultra)fast catalyst-free macromolecular conjugation in aqueous environment at ambient temperature

Tailor-made water-soluble macromolecules, including a glycopolymer, obtained by living/controlled RAFT-mediated polymerization are demonstrated to react in water with diene-functionalized poly(ethylene glycol)s without pre- or post-functionalization steps or the need for a catalyst at ambient temperature. As previously observed in organic solvents, hetero-Diels-Alder (HDA) conjugations reached quantitative conversion within minutes when cyclopentadienyl moieties were involved. However, while catalysts and elevated temperatures were previously necessary for open-chain diene conjugation, additive-free HDA cycloadditions occur in water within a few hours at ambient temperature. Experimental evidence for efficient conjugations is provided via unambiguous ESI-MS, UV/vis, NMR, and SEC data.     

Multichannel Conductance of Folded Single‐Molecule Wires Aided by Through‐Space Conjugation

Deciphering charge transport through multichannel pathways in single‐molecule junctions is of high importance to construct nanoscale electronic devices and deepen insight into biological redox processes. Herein, we report two tailor‐made folded single‐molecule wires featuring intramolecular π–π stacking interactions. The scanning tunneling microscope (STM) based break‐junction technique and theoretical calculations show that through‐bond and through‐space conjugations are integrated into one single‐molecule wire, allowing for two simultaneous conducting channels in a single‐molecule junction. These folded molecules with stable π–π stacking interaction offer conceptual advances in single‐molecule multichannel conductance, and are perfect models for conductance studies in biological systems, organic thin films, and π‐stacked columnar aggregates.     

Discrete macromolecular constructs via the Diels–Alder “Click” reaction

Functional polymeric materials with desired properties can be designed by precise control of macromolecular architectures. Over the recent years, click reactions have enabled efficient synthesis of a variety of polymers with different topologies via efficient polymer–polymer conjugations. While the copper catalyzed Huisgen type (3+2) dipolar cycloaddition between azide and alkyne has been widely used toward this goal, the Diels–Alder (DA) reaction offers an alternative click reaction that allow efficient macromolecular conjugations, oftentimes without the need of any additional reagent or catalyst. This article highlights, with illustrative examples, the power of the DA “click” reaction to efficiently synthesize a variety of different well‐defined macromolecular constructs in a modular fashion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

碘化亚铜/乙二胺催化氮杂环化合物的N-芳基化反应

以碘化亚铜/乙二胺为催化体系,研究了卤代芳烃和氮杂环化合物的Ullmann反应。 结果表明,氮杂环化合物的pKa越小,芳基化反应越容易进行,p-π共轭形成的富电子卤代芳烃有利于反应,非p-π共轭的富电子卤代芳烃使反应变难。     

聚合物模板微球表面电性对中空二氧化硅微球形貌的影响

分别以过硫酸钾和偶氮二异丁基脒盐酸盐为引发剂,以聚乙烯吡咯烷酮(PVP)为分散剂,在水中引发苯乙烯聚合制备了2种表面分别带负电性和正电性基团的聚苯乙烯(PS)模板微球.在氨水催化下,利用正硅酸乙酯的水解缩合,形成PS/SiO_2复合微球,去除模板后得到中空SiO_2微球,并对其进行FTIR、电子显微镜、TGA以及氮气吸附等分析表征.结果表明,PS模板微球表面的电性决定了OH-的分布,从而导致PS模板微球表面SiO_2壳层不同的形成机制.当以表面带负电的PS微球为模板时,可得到树莓状的中空SiO_2微球;而以表面带正电的PS微球为模板时,得到是表面光滑的,具有介孔结构的中空SiO_2微球.     

Multicenter‐Bond‐Based Quantum Interference in Charge Transport Through Single‐Molecule Carborane Junctions

Molecular components are vital to introduce and manipulate quantum interference (QI) in charge transport through molecular electronic devices. Up to now, the functional molecular units that show QI are mostly found in conventional π‐ and σ‐bond‐based systems; it is thus intriguing to study QI in multicenter bonding systems without both π‐ and σ‐conjugations. Now the presence of QI in multicenter‐bond‐based systems is demonstrated for the first time, through the single‐molecule conductance investigation of carborane junctions. We find that all the three connectivities in carborane frameworks show different levels of destructive QI, which leads to highly suppressed single‐molecule conductance in para‐ and meta‐connected carboranes. The investigation of QI into carboranes provides a promising platform to fabricate molecular electronic devices based on multicenter bonds.     

反-1,2-双[2-(5-取代苯基恶唑基)]环丙烷的合成与光性能的研究

合成了8个反 -1,2-双[2-(5-取代苯基恶唑基)]环丙烷和2个1,2-双[2-取代苯基恶唑基)]乙烷,其中9个为新化合物.讨论了化合物的结构与其电子光谱及荧光量子产率间的关系.发现恶唑环与三元环间存在一定程度的共轭,并解释了上述化合物荧光量子产率较低的现象.     

Novel Biodegradable Polymer with Redox‐Triggered Backbone Cleavage Through Sequential 1,6‐Elimination and 1,5‐Cyclization Reactions

In the past decade, the self‐immolative biodegradable polymer arose as a novel paradigm for its efficient degradation mechanism and vast potential for advanced biomedical applications. This study reports successful synthesis of a novel biodegradable polymer capable of self‐immolative backbone cleavage. The monomer is designed by covalent conjugations of both pendant redox‐trigger (p‐nitrobenzyl alcohol) and self‐immolative linker (p‐hydroxybenzyl alcohol) to the cyclization spacer (n‐2‐(hydroxyethyl)ethylene diamine), which serves as the structural backbone. The polymerization of the monomer with hexamethylene diisocyanate yields a linear redox‐sensitive polymer that can systemically degrade via sequential 1,6‐elimination and 1,5‐cyclization reactions within an effective timeframe. Ultimately, the polymer's potential for biomedical application is simulated through in vitro redox‐triggered release of paclitaxel from polymeric nanoparticles.     

A new bioorthogonal cross-linker with alkyne and hydrazide end groups for chemoselective ligation. Application to antibody labelling

We describe here the synthesis of the first bioorthogonal cross-linking reagent based on aminocaproic acid core with a hydrazide function at one end to react with glycoproteins and an alkyne group at the other end for Cu(I)-catalyzed click chemistry to azide-derivatized probes. As an application, this cross-linker was used to orthogonally conjugate profluorescent 3-azido-7-hydroxycoumarin to immunoglobulin G (IgG). An immunoassay showed that IgG was mostly not affected by the Cu(I)-catalyzed click chemistry conditions. Successful conjugations and retained immunoreactivity demonstrate the potential of this new bioorthogonal cross-linker in chemoselective ligation.     

Acquisition of the ability to grow under autotrophic conditions by heterotrophic bacteria through the introduction of DNA fragments from hydrogen-oxidizing bacteria

Applied Biochemistry and Biotechnology - Pseudomonas oxalaticus OX1 carrying recombinant plasmid pFUS and 29 gramnegative bacteria were used as donor and recipients, respectively, for conjugations....     

Template free electrochemical deposition of ZnSb nanotubes for Li ion battery anodes

ZnSb nanotubes were grown through a template free electrodeposition method under over-potential conditions. The growth of the nanotubes was attributed to the template effect from H(2) bubbles. Due to their hollow structure, the ZnSb nanotubes depicted better Li ion storage performance compared to that of ZnSb nanoparticles deposited under different conditions.     

Micropatterning of lanthanum-based oxide thin film on self-assembled monolayers

We studied the direct micropatterning of a lanthanum-based thin film on a template of self-assembled monolayers in an aqueous solution at 80 degrees C. The template composed of silanol and octadecyl areas was prepared by UV-modified octadecyltrichlorosilane SAMs through a photomask. The amorphous La(2)O(CO(3))(2) x H(2)O thin films were selectively deposited in the silanol regions. Crystallized La(2)O(3) was obtained after heating at 800 degrees C in air.     

Affinity screening by packed capillary high performance liquid chromatography using molecular imprinted sorbents. II. Covalent imprinted polymers

This study concentrates on the production of covalent molecular imprint polymers (MIPs) as highly selective sorbents for nortriptyline (NOR), a representative tricyclic antidepressant (TCA). The functionalized template contains a polymerizable 4-vinylphenyl carbamate moiety used to bind the template molecule to the polymer matrix. Polymerization with a cross-linker followed by hydrolytic cleavage of the labile carbamate functionality leaves an MIP with selective binding sites capable of binding template through hydrogen bonding interactions. Demonstrated chromatographically through a "selection index", these MIPs showed high selectivity for the template molecule (NOR) among a library of structurally similar compounds. The recognition was found to correlate with structural similarity to the template compound. A direct comparison between covalent and non-covalent molecular imprinting strategies reveals a great deal of improvement in the peak shape of the retained compound resulting from covalent imprinting (evidenced by peak asymmetry factors A.).     

Preparation and Evaluation of Molecularly Imprinted Monolithic Column for Felodipine in Micro-liquid Chromatography

This study concentrated on the production of molecularly imprinted polymers (MIPs) as highly selective sorbents for felodipine (FLD), a representive dihydropyridine calcium antagonists. Demonstrated chromatographically through a selection factor, these MIPs showed high selectivity for the template molecule among a group of structurally similar compounds. The recognition was found to correlate with structural similarity to the template compound.     

香草醛系列化合物分子印迹聚合物膜的渗透特性

以香草醛(Van)或邻香草醛(o-Van)为模板分子, 用紫外光引发原位聚合, 分别制备了以尼龙和聚偏氟乙烯微孔滤膜为支撑材料的分子印迹复合膜, 并用紫外分光光度法研究了模板分子与功能单体之间的相互作用. 模板分子及竞争物的混合溶液渗透实验结果表明, 支撑材料对膜选择性传输趋势基本没有影响, 但选用合适的支撑材料会得到更理想的分离效果; 当竞争物尺寸小于模板分子时, 尺寸效应起主要作用, 竞争物优先传输; 当模板分子与竞争物尺寸相近时, 尺寸效应不起作用, 模板分子的选择性识别位点及与其相匹配的孔穴起主要作用, 模板分子优先传输; 当竞争物尺寸大于模板分子时, 则尺寸效应和模板分子的选择性识别位点及与其相匹配的孔穴同时起作用, 故模板分子优先传输.     

Surfactant Templated Silica Xerogels as Adsorbents for Rhodamine 6G

A series of silica xerogels was synthesized by using TEOS as the silica precursor and a non ionic surfactant Triton X100 (TX100) and a cationic surfactant Hexadecyltrimethylammonium Bromide (CTAB) as templates. The xerogels were synthesized through 2‐way catalysis using ultrasonic radiations for homogeneous mixing of the precursors and template. The surfactant template was later removed through calcination at 550 °C. It was found out that gels having CTAB as the template had higher surface area (612.08 m²/g) than the gels templated by TX100 (539.6 m²/g). High surface area xerogels were used in adsorption experiments for aqueous solutions of Rhodamine 6G (R6G). UV visible spectroscopy was used to find out the concentrations of dye solutions. The adsorption data of both the types of xerogels was found to follow Freundlich's adsorption model pointing towards the possibility of adsorption of the dye molecules on the heterogeneous surface of the adsorbent.     

Synthesis of a common tetrasaccharide motif of Haemophilus influenzae LPS inner core structures

A conserved tetrasaccharide structure, L-glycero-alpha-D-manno-heptopyranosyl-(1-->2)-(6-O-aminoethylphosphono-L-glycero-alpha-D-manno-heptopyranosyl)-(1-->3)-[beta-D-glucopyranosyl-(1-->4)]-L-glycero-alpha-D-manno-heptopyranose, from the LPS inner core of Haemophilus influenzae has been synthesised as its ethylamino glycosides to allow later conjugations. Starting from a previously synthesised suitably protected trisaccharide intermediate, the third heptose and subsequently the spacer were introduced using thioglycoside donor chemistry. The phosphoethanolamine was formed employing a Boc-protected phosphoamidite. Final deprotection and conjugation to biotin gave conjugates that will be used to study the specificity of MAbs raised against native LPS structures.     

Solution-phase template approach for the synthesis of Cu(2)S nanoribbons

In this paper, we have developed a solution-phase template approach to synthesize Cu(2)S nanoribbons for the first time. Bi(2)S(3) nanoribbons act as both template and reactant when treated with small CuCl particles, generating Cu(2)S nanoribbons with the assistance of the solvent ethanol. Nanoribbons with different compositions of Bi(2)S(3) and Cu(2)S also could be obtained through controlling the reaction time. This kind of template method is expected to be a general template approach due to its slow reaction rate and simplicity.